Locating dowel sleeves (DASP8)
Click on this image to zoom in.
Click on this image to zoom in.
- Volume Discount
Product Details:
Manufacturer part number: DASP8
Brand: MISUMI
Price: 2.16 €
Delivery time: 5 Days
Technical Data:
With/without tapped hole: With
D (Diameter): 12 mm
L (L dimension): 16 mm
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
DASP8
- Drawing
- 3D Preview 3D preview is available after complete configuration
- Part Numbers
- Catalog
Dimensional Drawing / Product Specifications
DAS
DASP (With Tapped Hole)
[M]Material: EN 1.3505 Equiv. [H] Hardness: 55 HRC or more
Specification Table
| [ T ] | D | L | d | R | M × P (Removal Tap) | Part Number | |
|---|---|---|---|---|---|---|---|
| Type | No. | ||||||
| +0.010 +0.005 | 6 | 8 | 4.2 | 0.4 | — | DAS DASP | ※4 |
| 8 | 10 | 5.2 | 0.4 | 6 × 1.0 | 5 | ||
| 10 | 12 | 6.3 | 0.6 | 8 × 1.25 | 6 | ||
| 12 | 16 | 8.4 | 0.7 | 10 × 1.5 | 8 | ||
| 14 | 20 | 10.4 | 0.8 | 12 × 1.75 | 10 | ||
| 18 | 24 | 12.5 | 0.8 | 14 × 2.0 | 12 | ||
[ ! ] *No.4 is for DAS only.
[!] DASP is thinner than DAS. Therefore, use DAS or one size larger for the areas where rigidity is required.
Ordering Example
| Part Number |
| DAS 6 |
Related Information
■ Features
·Same level of positioning as dowel pin is possible.
· Positioning and tightening can be done at one time, and space can be saved.
·Three-layer plates can also be positioned.
·When press-fitting into the plate, the positioning ring deforms elastically.
■How to install the positioning ring
| (1) | Hole Machining Dimension to Plate |
| Hole Machining on Fixed Plate (Press Fit) |
Actual O.D. of Positioning Ring 0/-0.015
| Hole Machining on Plate on Removable Side (Gaps, Transition-Fit) |
Actual O.D. of Positioning Ring +0.015/0
These hole machining dimensions vary depending on the plate material, hardness, and applications, so use this as a reference.
| (2) | If positioning accuracy is required and both ends are press-fitted, apply removal tap or wedge to the plate to facilitate removal. | |
Fixed Side Removable Side Installation Example
| ||
App. Example
indicates positioning rings | ||
Part Number:
- In order to open the 3D preview, the part number must be fixed.
3D preview is not available, because the part number has not yet been determined.
Part Number
|
|---|
| DASP8 |
| Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | RoHS | With/without tapped hole | D (Diameter) (mm) | L (L dimension) (mm) | |
|---|---|---|---|---|---|---|---|---|
2.16 € | 1 | Available | 5 Days | 10 | With | 12 | 16 |
Loading...
Basic information
| Shape | Ring | Diameter D tolerance | +0.010/+0.005 |
|---|
This page is Locating dowel sleeves, part number DASP8.
You can find the detail information about specifications and dimensions on part number DASP8.
Configure
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Variation of this product
| Part Number |
|---|
| DAS10 |
| DAS12 |
| DAS4 |
| DAS5 |
| DAS6 |
| DAS8 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Standard Shipping Days ? | RoHS | With/without tapped hole | D (Diameter) (mm) | L (L dimension) (mm) |
|---|---|---|---|---|---|---|---|---|
1.99 € | 1 | Available |
Same day
Stock | 10 | W/O | 14 | 20 | |
2.11 € | 1 | Available | 5 Days | 10 | W/O | 18 | 24 | |
1.51 € | 1 |
Same day
Stock | 10 | W/O | 6 | 8 | ||
1.62 € | 1 | Available |
Same day
Stock | 10 | W/O | 8 | 10 | |
1.75 € | 1 |
Same day
Stock | 10 | W/O | 10 | 12 | ||
1.87 € | 1 | Available | 5 Days | 10 | W/O | 12 | 16 |
Tech Support
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.