Inner Diameter Measuring Instruments

?* Information on days to ship and prices

• 

  838 TI for Internal Measurement

  MAHR

  Select to compare

  Configure now
  Starting from∗ ：	684.00 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Setting Ring, Steel

  MITUTOYO

  Used for quick and accurate setting of 2-Point Inside Measuring Instruments and 2-Point/3-Point Inside Micrometers
  Nominal diameter is marked in 0.001 mm increments
  - Steel Setting Rings are available from 1 mm up to 300 mm and Ceramic Setting Rings from 4 mm up to 45 mm

  Select to compare

  Configure now
  Starting from∗ ：	120.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Adapter Borematic

  MITUTOYO

  Select to compare

  Configure now
  Starting from∗ ：	159.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Setting Ring, Ceramic

  MITUTOYO

  Used for quick and accurate setting of 2-Point Inside Measuring Instruments and 2-Point/3-Point Inside Micrometers
  Nominal diameter is marked in 0.001 mm increments
  - Steel Setting Rings are available from 1 mm up to 300 mm and Ceramic Setting Rings from 4 mm up to 45 mm

  Select to compare

  Configure now
  Starting from∗ ：	268.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  177 Series Set Ring

  MITUTOYO

  Used for base point confirmation of internal micrometer, hole test, borematic, cylinder gauge, etc.

  Select to compare

  Configure now
  Starting from∗ ：	126.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Self-centring dial bore gauge Marameter 844 NH

  MAHR

  Select to compare

  Configure now
  Starting from∗ ：	765.00 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Caliper gauge for internal measurement Marameter 838 TI

  MAHR

  Select to compare

  Configure now
  Starting from∗ ：	684.00 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  838 TIZ for Internal Measurement

  MAHR

  Select to compare

  Configure now
  Starting from∗ ：	703.40 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  844 Nv Measuring depth extension

  MAHR

  Select to compare

  Configure now
  Starting from∗ ：	205.50 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Self-centring dial bore gauge Marameter 844 N

  MAHR

  Select to compare

  Configure now
  Starting from∗ ：	612.00 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Self-centering dial bore gauge Marameter 844 NB

  MAHR

  Select to compare

  Configure now
  Starting from∗ ：	1,045.00 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Telescopic Gauge, Inch

  MITUTOYO

  A Mitutoyo transfer gauge that enables the diameter of holes, bores or grooves to be measured with outside micrometers or calipers. In operation the spring loaded plunger is allowed to expand within the feature to be measured and then locked in place using the knurled rotary control on the end of the handle. In practice some manipulation is necessary to ensure that the minimum size has been captured, after which the gauge is carefully withdrawn so that the dimension across the contact surfaces can be measured.

  Select to compare

  Configure now
  Starting from∗ ：	58.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Telescopic Gauge

  MITUTOYO

  A Mitutoyo transfer gauge that enables the diameter of holes, bores or grooves to be measured with outside micrometers or calipers. In operation the spring loaded plunger is allowed to expand within the feature to be measured and then locked in place using the knurled rotary control on the end of the handle. In practice some manipulation is necessary to ensure that the minimum size has been captured, after which the gauge is carefully withdrawn so that the dimension across the contact surfaces can be measured.

  Select to compare

  Configure now
  Starting from∗ ：	58.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Stand for Bore Gauge Series 526

  MITUTOYO

  Quick stand for precision bore gauges, for serial inside measuring of small parts.

  Select to compare

  Configure now
  Starting from∗ ：	1,178.00 €
  Min. Shipping Days ：	60 Days

  *Unit price with basic configuration

• 

  Internal Digital Caliper Gauge

  MITUTOYO

  A Mitutoyo internal digital caliper gauge designed for use as a comparator, to be set up using a setting ring or micrometer. The caliper is spring loaded and makes point contact at constant measuring force.

  Select to compare

  Configure now
  Starting from∗ ：	742.50 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Internal Dial Caliper Gauge, Inch

  MITUTOYO

  This analog Internal Dial Caliper Gauge offers you the following benefits:
  - Excellent resistance against water and dust (IP65 protection level)
  - Optimized measuring force
  - Ergonomically designed to lie securely in your hand when measuring

  Select to compare

  Configure now
  Starting from∗ ：	712.50 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Internal Dial Caliper Gauge

  MITUTOYO

  A Mitutoyo internal dial caliper gauge designed for use as a comparator, to be set up using a setting ring or micrometer. The caliper is spring loaded and makes point contact at constant measuring force.

  Select to compare

  Configure now
  Starting from∗ ：	755.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Gauge Sets, Inch

  MITUTOYO

  A set of six Mitutoyo transfer gauges that enables the diameter of holes, bores or grooves to be measured with outside micrometers or calipers. In operation the spring loaded plunger of a gauge is allowed to expand within the feature to be measured and then locked in place using the knurled rotary control on the end of the handle. In practice some manipulation is necessary to ensure that the minimum size has been captured, after which the gauge is carefully withdrawn so that the dimension across the contact surfaces can be measured. Enables small hole, bore and groove measurement using existing workshop tools. Knurled finish provides secure handling and easy locking.

  Select to compare

  Configure now
  Starting from∗ ：	324.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Gauge Sets

  MITUTOYO

  A set of six Mitutoyo transfer gauges that enables the diameter of holes, bores or grooves to be measured with outside micrometers or calipers. In operation the spring loaded plunger of a gauge is allowed to expand within the feature to be measured and then locked in place using the knurled rotary control on the end of the handle. In practice some manipulation is necessary to ensure that the minimum size has been captured, after which the gauge is carefully withdrawn so that the dimension across the contact surfaces can be measured. Enables small hole, bore and groove measurement using existing workshop tools. Knurled finish provides secure handling and easy locking.

  Select to compare

  Configure now
  Starting from∗ ：	324.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Digital Indicator, Bore Gauge ID-C, Inch/Metric

  MITUTOYO

  This indicator is designed for inside diameter measurement applications on bore gauges
  It offers the following benefits:
  - Minimum value holding function that allows you to easily detect a hole diameter.
  - Analogue bar graph in the display (12 different scales switchable)
  - The analogue bar graph enhances usability by adding a dial gauge “feel” to digital measurement.
  - GO/±NG tolerance judgement function
  - A fast measurement frequency mode(detection cycle 20ms or 50times/s) is selectable to measure in the peak detection mode more reliably.
  - Easy indicator setup via a setup menu
  - A USB interface box can be used to set up the indicator from PC via dedicated software.

  Select to compare

  Configure now
  Starting from∗ ：	563.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Digital Indicator, Bore Gauge ID-C

  MITUTOYO

  This indicator is designed for inside diameter measurement applications on bore gauges
  It offers the following benefits:
  - Minimum value holding function that allows you to easily detect a hole diameter.
  - Analogue bar graph in the display (12 different scales switchable)
  - The analogue bar graph enhances usability by adding a dial gauge “feel” to digital measurement.
  - GO/±NG tolerance judgement function
  - A fast measurement frequency mode(detection cycle 20ms or 50times/s) is selectable to measure in the peak detection mode more reliably.
  - Easy indicator setup via a setup menu
  - A USB interface box can be used to set up the indicator from PC via dedicated software.

  Select to compare

  Configure now
  Starting from∗ ：	563.00 €
  Min. Shipping Days ：	60 Days

  *Unit price with basic configuration

• 

  Digital ABSOLUTE Borematic (Internal)

  MITUTOYO

  This is a individual unit Three-Point Digimatic Snap Open Bore Gauge.
  It offers you the following benefits:
  - It enables you to take measurements easily and quickly.
  - Titanium-coated measuring pins gives you excellent durability and impact resistance.
  - 330° rotatable display unit also gives you easy reading at any angle.
  - GO/NG tolerance judgement function.

  Select to compare

  Configure now
  Starting from∗ ：	1,405.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Digital ABSOLUTE Bore Gauge, Inch/Metric

  MITUTOYO

  A Mitutoyo ABSOLUTE Digimatic bore gauge designed exclusively for ID measurement. A minimum value holding function provides easy measurement of hole diameter. Up to three sets of master value and upper/lower tolerance values can be memorized and recalled at the push of a button. An analog bar indicator is integrated to enhance ease of reading, especially for GO/å±NG judgement. Measurements can be made inside very deep holes by using up to four extension rods.

  Select to compare

  Configure now
  Starting from∗ ：	1,750.26 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Digital ABSOLUTE Bore Gauge

  MITUTOYO

  This is a Digimatic bore gauge that lets you take digital inside measurements with amazing accuracy even at the maximum 2 m depth.
  The ABSOLUTE Digimatic Bore Gauge offers you the following benefits:
  - Precision bore gauge lets you easily measure the diameter of deep bores without loss of accuracy.
  - You can store and recall up to 3 sets of master values and upper/lower tolerance values at the push of a button.
  GO/±NG judgement can be set. Up to max. four extension rods (250 or 500 mm) can be used.

  Select to compare

  Configure now
  Starting from∗ ：	1,750.26 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Contact Point Series 526

  MITUTOYO

  Split-ball probes are protected by a diamond-like DLC coating.
  Split-ball probes are hard chrome plated
  DLC Black Diamond:
  - Extremely high wear protection, due to low frictional resistance
  - Safety due to high hardness and resistance
  - Safety due to sustained accuracy and precision

  Select to compare

  Configure now
  Starting from∗ ：	121.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Contact Point for Series 526

  MITUTOYO

  Split-ball probes are protected by a diamond-like DLC coating.
  Split-ball probes are hard chrome plated
  DLC Black Diamond:
  - Extremely high wear protection, due to low frictional resistance
  - Safety due to high hardness and resistance
  - Safety due to sustained accuracy and precision

  Select to compare

  Configure now
  Starting from∗ ：	66.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Bore Gauge with Micrometer Head

  MITUTOYO

  This is a Micrometer Head that enables measurements without interchangeable anvils.
  It offers you the following benefits:
  - A long plunger stroke gives you amazing accuracy.
  - Contact points are carbide (>18 mm range), giving you high durability and wear resistance.- Wide measuring range with sub-anvils.

  Select to compare

  Configure now
  Starting from∗ ：	531.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Bore Gauge Checker

  MITUTOYO

  Select to compare

  Configure now
  Starting from∗ ：	1,867.50 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Auxiliary Block Kit for Bore Gauge

  MITUTOYO

  This is an Auxiliary Block Kit that allows you to efficiently carry out reference-setting of dial bore gauges and tubular inside micrometers (18-150mm).

  Select to compare

  Configure now
  Starting from∗ ：	292.11 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Adapter Borematic Series 568

  MITUTOYO

  Select to compare

  Configure now
  Starting from∗ ：	41.00 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

Loading...