Rod End Bearings, Spherical Bearings

?* Information on days to ship and prices

• • Recommendation

  

  Link Ball, Male Threaded Holder, BL

  THK

  The holder is perpendicular to the ball shank.
  With grease pockets on the top and bottom of the spherical area, this model has high lubricity and high wear resistance.

  • Volume Discount

  • Stock

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	7.46 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Recommendation

  

  Radial spherical plain bearings ES2RS Series

  SKF

  Select to compare

  Configure now
  Starting from∗ ：	19.78 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Rod End Bearings / Standard

  MISUMI

  [Material] Main body EN 1.1181 Equiv.; Connection thread form: you can choose male or female thread.

  • Volume Discount

  • Order quantities extended (D-JIT)
  • Stock

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	8.68 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Ball joint heads with threaded bolt, Stainless Steel

  GANTER

  Stainless Steel-Ball joint heads GN 648.6 are similar to DIN ISO 12240-4, series K (formerly DIN 648 K).
  

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	30.38 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  GN 346 Ball joint thrust pads, Steel

  GANTER

  Ball joint thrust pads GN 346 are in general used for transfer of clamping forces. They adjust themselves to uneven or non-parallel surfaces and clamp without twisting the clamped parts.
  The values were arrived at by a series of tests whereby a limited number of ball joint pads were subjected for a limited time to a vertical static load to the pads.
  At the values given in the table a permanent deformation of the ball is almost impossible.
  Ball joint thrust pads GN 346 can also be used as levelling feet with a small foot diameter.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	6.82 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Ball joint heads with female thread

  GANTER

  Ball joint heads GN 648.1 are similar to DIN ISO 12240-4, series K (formerly DIN 648 K).

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	13.78 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Rod End Bearings - Stainless Steel, Oil-Free

  MISUMI

  * Those will be the successor to PHSS/PHSOS.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	29.56 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Spherical Bearings / Standard

  MISUMI

  [Material] Support: EN 1.1181 Equiv., spherical inner ring: JIS-SUJ (rolling bearing steel)2 (58HRC or more), sleeves: special copper alloy with surface treatment options: spherical inner ring: hard chrome plating

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	11.97 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Ball joint heads with female thread, Stainless Steel

  GANTER

  Stainless Steel-Ball joint heads GN 648.5 are similar to DIN ISO 12240-4, series K (formerly DIN 648 K).

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	30.38 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Igubal spherical bearing oil free type EGLM

  IGUS

  Easy to install and press fit. Delivers excellent lubricant-free performance, chemical resistance, corrosion resistance and is lightweight EGLM

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	6.96 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Rod End, Male Threaded Type POS

  THK

  This model is a highly rigid rod end that is basically the same as the female threaded model PHS, but has a male thread on the holder end.
  * The rod end shown in the photo is a representative product.
  Thread sizes M5 and M6 do not come with a nipple. Lubricate the bearing directly.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	12.44 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  GN 648.8 Ball joints

  GANTER

  Ball joints GN 648.8 are similar to DIN ISO 12240-4, series K.
  These ball joints are integrated in the ball joint heads GN 648.1 and GN 648.2.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	11.16 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Joint Bearing

  SKF

  [Specifications]
  ・I.D. D(mm): 4~220
  ・Outer diameter(mm): 12~320
  ・Width(mm): 5~135

  Select to compare

  Configure now
  Starting from∗ ：	11.10 €
  Min. Shipping Days ：	12 Days

  *Unit price with basic configuration

• 

  Radial spherical plain bearings GE..-UK-2RS, maintenance-free, to DIN ISO 12 240-1, lip seals on both sides

  INA

  [Specifications]
  ・I.D. D(mm): 17~280
  ・Allowable Tilt Angle α(deg): 5~10
  ・Outer Diameter(mm): 30~400
  ・Width(mm): 14~155
  ・DIN ISO 12 240-1

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	27.51 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Stainless Steel-Ball joints

  GANTER

  Stainless Steel-Ball joints GN 648.9 are similar to DIN ISO 12240-1, series K.
  These Stainless Steel-Ball joints are integrated in the Stainless Steel-Ball joint heads GN 648.5 and GN 648.6.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	25.98 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Igubal® Rod End Bearings Oil-Free Type KSTM

  IGUS

  Easy to install and press fit. Delivers excellent lubricant-free performance, chemical resistance, corrosion resistance and is lightweight KSTM

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	6.78 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  GN 648.2 Ball joint heads with threaded bolt

  GANTER

  Ball joint heads GN 648.2 are similar to DIN ISO 12240-4, series K (formerly DIN 648 K).
  

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	13.22 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Spherical Bearing with Housing / Compact Type

  MISUMI

  [Spherical plain bearing "Spherical plain bearing type" Flange type 4 circles "Main body material" EN 1.1181 Equiv. "Ball material" JIS-SUJ (rolling bearing steel)2 "Bushing material" Special copper alloy.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	59.06 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Joint Head

  SKF

  [Specifications]
  ・I.D. D(mm): 3~100
  ・Outer diameter(mm): 12~230
  ・Width(mm): 6~100

  Select to compare

  Configure now
  Starting from∗ ：	11.95 €
  Min. Shipping Days ：	12 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Rod End Bearings / 90 Deg. Link Ball Type

  MISUMI

  [Material] Holder: High strength zinc alloy, Shaft with ball: EN 1.1181 Equiv. (20 to 28HRC), Boot: NBR type special synthetic rubber "Hardness" Spherical part: 650HV or more.

  • Volume Discount

  • Order quantities extended (D-JIT)

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	6.05 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Link Ball, Male Threaded Holder, RBI

  THK

  The mounting bolt and holder are arranged on the same axis, allowing this model to bear an axial load.
  The boot contains grease, providing high lubricity and high abrasion resistance.

  • Volume Discount

  • Stock

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	10.10 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Igubal rod end bearing oil free type (female screw) KBL(R)M

  IGUS

  Delivers excellent lubricant-free performance, chemical resistance, corrosion resistance and is lightweight KBR(L)M

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	4.90 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Universal (Metal Rod End Fitting) Ball Joint

  AIRTAC

  Universal (metal rod end fitting) ball joint manufactured by AirTAC, a company highly rated for its low prices and high quality.· Lubricated type universal ball joint

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	4.14 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Angled ball joints

  GANTER

  Angled ball joints DIN 71802 consist of a ball socket DIN 71805 and a ball shank DIN 71803.
  The angle of rotation for the type with safety catch (Types CS, BS) ist 15°, without safety catch (Types C, B) is 18°.
  For assembly the ball ist pushed through the circlip which acts as a retainer. Should the retaining force (see pull-off force in the table above) between ball and socket not be sufficient, this can be increased by adding a safety catch, which can easily be fitted.
  To protect the angled ball point, a dust cap GN 710 can be added.
  The hexagon nut is part of the angled ball joints.
  Dust caps GN 710 have to be ordered seperately.
  

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	2.28 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Rod ends with plain bearing, internal thread, stainless steel, DIN ISO 12240-1 maintenance-free (27630-01)

  NORELEM

  · Bearing ball, hardened
  
  · Plain bearing, maintenance-free
  
  · Version: right or left-hand thread

  Select to compare

  Configure now
  Starting from∗ ：	26.51 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Hydraulic rod ends GIHRK..-DO, with thread clamping device, requiring maintenance, to DIN ISO 12 240-4, right hand thread

  INA

  [Specifications]
  ・I.D. D(mm): 20~120
  ・Allowable Tilt Angle α(deg): 5, 6, 7, 9
  ・Outer Diameter(mm): 56~340
  ・Product size (length)(mm): 78~490
  ・DIN ISO 12 240-4

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	62.78 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Rod End, Female Threaded Type PHS Type

  THK

  Highly rigid with superior abrasion and corrosion resistance.
  The correct amount of lubricant can be supplied to the sliding surface via the grease nipple attached to the holder.
  
  [Features]
  · Lubrication: Lubricate before use. There is a lubrication hole and oil groove on the holder, so it can be lubricated via the grease nipple.
  · Left-hand female thread identification: For left-hand female threads, the letter "L" is added. "L" is marked on the holder of the product.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	12.67 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Igubal spherical bearing oil free type KGLM

  IGUS

  Easy to install and press fit. Delivers excellent lubricant-free performance, chemical resistance, corrosion resistance and is lightweight KGLM

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	2.78 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  L-Ball

  IKO

  [Features]
  · Grease filled part.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	9.03 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Stainless Steel- Angled ball joints

  GANTER

  Stainless Steel-Angled ball joints DIN 71802 consist of a ball socket DIN 71805 and a ball shank DIN 71803.
  The angle of rotation for the type with safety catch (Type CSN) is 15°, without safety catch (Type CN) is 18°.
  For assembly the ball ist pushed through the circlip which acts as a retainer. Should the retaining force (see pull-off force in the table above) between ball and socket not be sufficient, this can be increased by adding a safety catch, which can easily be fitted.
  To protect the angled ball point, a dust cap GN 710 can be added.
  The hexagon nut is part of the angled ball joints.
  Dust caps GN 710 have to be ordered seperately.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	16.26 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  ELGES Maintenance-Free Axial Spherical Plain Bearing, Hard Chrome / ELGOGLIDE, Open

  ELGES

  Select to compare

  Configure now
  Starting from∗ ：	80.69 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Rod End Bearings / Link Ball with Thread

  MISUMI

  [Material] Retainer: High strength zinc alloy, stem with ball: EN 1.1181 equiv. (20 to 28HRC), boot: NBR type special synthetic rubber "Hardness" Ball part: 650HV or more

  • Volume Discount

  • Order quantities extended (D-JIT)

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	8.44 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Rod End, Male Threaded Type (Oil Free) NOS-T

  THK

  This model is an oil free type rod end that is basically the same as the female threaded model NHS-T, but has a male thread on the holder end.

  • Volume Discount

  • Stock

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	13.12 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Rod ends with ball bearing internal thread, DIN ISO 12240-4 (27626)

  NORELEM

  · For transmitting movement processes
  
  · Hardened and permanently lubricated ball bearing
  
  · Bearing play 15–40 µm
  
  · Cover washers for sealing
  
  · Version: right or left-hand thread

  Select to compare

  Configure now
  Starting from∗ ：	47.93 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Spherical bearings K/E series DIN ISO 12240-1 (27632-02)

  NORELEM

  · Suitable for use under high pressure
  
  · Maintenance-free
  
  · Durable
  
  · Low friction

  Select to compare

  Configure now
  Starting from∗ ：	20.70 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Rod End, Male Thread Type POS Series

  OZAK

  (Features)
  Using a high precision steel bearing as the inner ring, a special copper alloy ring is inserted into the carbon steel holder structure or outer ring, providing smooth and wear-resistant self alignment, rotation and oscillating movement.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	12.18 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Ball studs for ball joints DIN 71803 Form C (K0713)

  KIPP

  [Specifications]
  ・Main Body Material: Steel
  ・Surface finish body: galvanised and passivated
  ・Form: C
  ・Thread M: M5-M14
  ・Standard: DIN 71803
  
  [Features]
  ・Spare part for DIN 71802 ball joints

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	0.67 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Axial joints similar to DIN 71802 (27665)

  NORELEM

  · For transmitting movement processes
  
  · Application sectors: machine and vehicle construction, material handling
  
  · Temperature range: -30 °C to +110 °C
  
  · Stainless steel version: protected against dust and dirt

  Select to compare

  Configure now
  Starting from∗ ：	6.54 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Spherical Plain Bearing SA1

  THK

  [Structure and Features]
  · The spherical plain bearing is a self-aligning plain bearing designed for heavy loads. The inner and outer rings are made from high-carbon chromium bearing steel that is hardened, ground, phosphate-coated and seized with molybdenum disulfide (MoS2). The SA1 model can bear large radial loads and thrust loads in both directions. Furthermore, as it is highly impact resistant, the spherical plain bearing is most suited for low speed, heavy load rocking components such as the cylinder clevises or hinges of construction and civil engineering machinery, truck suspensions, and train bolster anchors.
  [Types and Features]
  · The SA1 model of the series is popular in Europe. The outer ring is split at one point and is narrower and thinner than the SB model, so it can be used in small spaces. Models with dust seals on both sides (SA1-UU) are also available. These seals are highly effective at keeping out dust.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	20.44 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Spherical Plain Bearing SB

  THK

  The most widely used series in Japan. It is used for heavy loads since the spherical contact area has a large width.
  The outer ring is split at two points to accommodate the inner ring.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	16.01 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Radial spherical plain bearings GE..-FW, maintenance-free, to DIN ISO 12 240-1

  INA

  [Specifications]
  ・I.D. D(mm): 10-25
  ・Allowable Tilt Angle α(deg): 16-19
  ・Outer Diameter(mm): 22-47
  ・Width(mm): 12-28
  ・DIN ISO 12 240-1

  • Volume Discount

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	32.26 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Radial spherical plain bearings GE..-FW-2RS, maintenance-free, to DIN ISO 12 240-1, lip seals on both sides

  INA

  [Specifications]
  ・I.D. D(mm): 30~90
  ・Allowable Tilt Angle α(deg): 15, 16, 17
  ・Outer Diameter(mm): 55~150
  ・Width(mm): 32~85
  ・DIN ISO 12 240-1

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	83.88 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Axial joints for tractive forces adjustable, Form A (27670)

  NORELEM

  · For absorption of tractive forces
  
  · The ball's movement can be influenced using the clamping nut.
  
  · Various connection options through internal or external thread

  Select to compare

  Configure now
  Starting from∗ ：	33.67 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Igubal® Flanged Bearings (4 Holes) Oil-Free Type EFSM

  IGUS

  Easy to install and press fit. Delivers excellent lubricant-free performance, chemical resistance, corrosion resistance and is lightweight EFSM

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	8.24 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Igubal® Rod End Bearings Oil-Free Type (Angle Joint) AGRM

  IGUS

  Delivers excellent lubricant-free performance, chemical resistance, corrosion resistance and is lightweight AGRM

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	3.94 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

Loading...