Ejector sleeves / steel / nitrided / length configurable / concentricity 0.03 (ESNV-LC9-[80-300/0.01]-V[6,6.5,7])
Click on this image to zoom in.
Click on this image to zoom in.
Product Details:
Manufacturer part number: ESNV-LC9-[80-300/0.01]-V[6,6.5,7]
Brand: MISUMI
Price: Please contact the support for quotation
Delivery time: Quote
Technical Data:
D/P (Shaft diameter): 9 mm
V (Hole diameter): 6 ～ 7 mm
L (L dimension): 80 ～ 300 mm
(i)Remark
- Please check the content on our website as the PDF does not contain the most up-to-date information.
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
ESNV-LC9-[80-300/0.01]-V[6,6.5,7]
- Product specification
- 3D Preview 3D preview is available after complete configuration
- Part Numbers
- Catalog
| L | 50.00～ 75.00 | 75.01～ 100.00 | 100.01～ 125.00 | 125.01～ 150.00 | 150.01～ 175.00 | 175.01～ 200.00 | 200.01～ 225.00 | 225.01～ 250.00 | 250.01～ 275.00 | 275.01～ 300.00 |
|---|---|---|---|---|---|---|---|---|---|---|
| （L-S） | 35 | 50（V1.560） | 75（V1.585） | 90（V1.5110） | 115 | 120 | 145 | 170 | 185 | 210 |
Note that the Stepped Center Pin's shaft diameter (D) is too large to fit in the recess (C). (Details P.1310）
| Part Number | V | Applicable center pin shaft diameter tolerance | |
|---|---|---|---|
| ESNV-LC | H7 | -0.01 -0.02 | ※ Note that for sleeves with V dimension tolerance of H7, combination with center pins that have shaft diameter tolerance 0 -0.005 is not recommended. The reason for this is the fitting sections S are longer.(Details P.1309） |
| SKD61 equivalent＋Nitrided | |
| Surface : 900HV | |
| Base material : 40±3HRC | |
| b1 (Range of guaranteed shaft diameter precision) (Details P.1305） | |
| x1 max.=30 | |
| Range of guaranteed base material hardness (Details P.1307） | |
| Range of guaranteed surface hardness for nitriding (Details P.1308） | |
VH7
| V≦3.0 | 3.5≦V≦6.0 | V≧6.5 |
|---|---|---|
| +0.010 0 | +0.012 0 | +0.015 0 |
Specifications
| H | Part Number | L 0.01mm increments | V Selection | |
|---|---|---|---|---|
| Type | D | |||
| 7 | ESNV-LC | 4 | 50.00～150.00 | 1.5 |
| 50.00～200.00 | 2.0 | |||
2.5 | ||||
| 8 | 4.5 | 50.00～150.00 | 1.5 | |
| 50.00～200.00 | 2.0 | |||
2.5 | ||||
| 5 | 50.00～200.00 | 2.0 | ||
2.5 | ||||
3.0 | ||||
| 9 | 5.5 | 50.00～200.00 | 2.0 | |
2.5 | ||||
3.0 | ||||
3.5 | ||||
| 6 | 50.00～250.00 | 2.5 | ||
3.0 | ||||
3.5 | ||||
4.0 | ||||
| 10 | 6.5 | 50.00～250.00 | 2.5 | |
3.0 | ||||
3.5 | ||||
4.0 | ||||
| 7 | 50.00～250.00 | 2.5 | ||
3.0 | ||||
3.5 | ||||
4.0 | ||||
4.5 | ||||
5.0 | ||||
| 11 | 7.5 | 50.00～250.00 | 3.0 | |
3.5 | ||||
4.0 | ||||
4.5 | ||||
5.0 | ||||
| 8 | 50.00～250.00 | 4.0 | ||
4.5 | ||||
5.0 | ||||
5.5 | ||||
6.0 | ||||
| 14 | 9 | 80.00～300.00 | 6.0 | |
6.5 | ||||
7.0 | ||||
| 15 | 10 | 80.00～300.00 | 6.0 | |
7.0 | ||||
8.0 | ||||
Alterations
Part Number:
- In order to open the 3D preview, the part number must be fixed.
3D preview is not available, because the part number has not yet been determined.
Part Number
|
|---|
| ESNV-LC9-[80-300/0.01]-V[6,6.5,7] |
| Part Number | Minimum order quantity | Volume Discount | RoHS | D/P (Shaft diameter) (mm) | V (Hole diameter) (mm) | L (L dimension) (mm) | |
|---|---|---|---|---|---|---|---|
| 1 | Quote | 10 | 9 | 6 ～ 7 | 80 ～ 300 |
Loading...
Basic information
| Product composition | Single sleeve | Material | EN 1.2344 Equiv. | Surface treatment | Nitrided |
|---|---|---|---|---|---|
| Head thickness | 4mm(T4) | Shaft diameter tolerance | -0.01/-0.02 | Concentricity between the hole and shaft diameters | ◎0.03 |
| Boring method | Reaming | Inner dia. tolerance | H7 | Tapered or not | No |
| Center pin tip shape | No | Technical Standard | JIS |
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
- Technical Support
- Tel：+49 69 668173-0 / FAX：+49 69 668173-360
- Technical Inquiry
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.