Roller Slide Rails
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
- Drawing / Specifications
- 3D Preview 3D preview is available after complete configuration
- Part Numbers
- Catalog
Dimensional Drawings
RSRR25 (Rail only)
| RSR40 (Set: Slider 1 pc.) RSRR40 (Rail only)  | RSRT40(Connector Rail)  |
[!] Individual rails or sets cannot be connected together.
[!] The Connecter Rail comes with joint fittings and mounting screws.
[!] When using the Connecter Rail, remove the detachable stopper and secure it with the joint fittings.
| Type | Part Name | Material | Surface Treatment | |||
| Set | Rail only | |||||
| RSR25 | (1 slider) | RSRR25 | Rail | EN AW−6063 Equiv. | Clear Anodize | |
| Slider Plate | EN 1.4301 Equiv. | — | ||||
| Roller | Polyacetal | — | ||||
| RSR40 | (1 slider) | RSRR40 RSRT40 (Connecter Rail) | Rail | EN 1.0330 Equiv. | Trivalent Chromate | |
| Slider Plate | EN 1.0330 Equiv. | Trivalent Chromate | ||||
| Roller | JIS−SMF5040 | — | ||||
[!] Sliders can be added with alteration.
[!] The slider is not sold separately as a standard part.
Specification Table
| Part Number | − | L |
| RSRR40 | − | 800 |
| Part Number | L Selection | Effective Stroke * Slider 1 pc. | Number of Mounting Holes M | ℓ | Rail Mass (g) | |
| Type | No. | |||||
| Set RSR Rail RSRR | 25 | 160 | 74 | 2 | 40 | 32 |
| 240 | 154 | 3 | 40 | 48 | ||
| 320 | 234 | 4 | 40 | 64 | ||
| 400 | 314 | 5 | 40 | 80 | ||
| 480 | 394 | 6 | 40 | 96 | ||
| 560 | 474 | 7 | 40 | 112 | ||
| 640 | 554 | 8 | 40 | 128 | ||
| 720 | 634 | 9 | 40 | 144 | ||
| 800 | 714 | 10 | 40 | 160 | ||
| 880 | 794 | 11 | 40 | 176 | ||
| 960 | 874 | 12 | 40 | 192 | ||
| 1040 | 954 | 13 | 40 | 208 | ||
| 1200 | 1114 | 15 | 40 | 240 | ||
[ ! ]No.25 Type is maintenance-free, and the adopted Roller Bearings allow low noise motion.
| Part Number | L Selection | Effective Stroke * Slider 1 pc. | Number of Mounting Holes M | ℓ | Rail Mass (g) | |
| Type | No. | |||||
| Set RSR Rail RSRR | 40 | 300 | 194 | 3 | 50 | 400 |
| 350 | 244 | 4 | 25 | 440 | ||
| 400 | 294 | 4 | 50 | 480 | ||
| 450 | 344 | 5 | 25 | 520 | ||
| 500 | 394 | 5 | 50 | 560 | ||
| 550 | 444 | 6 | 25 | 590 | ||
| 600 | 494 | 6 | 50 | 630 | ||
| 650 | 544 | 7 | 25 | 670 | ||
| 700 | 594 | 7 | 50 | 700 | ||
| 750 | 644 | 8 | 25 | 740 | ||
| 800 | 694 | 8 | 50 | 770 | ||
| 900 | 794 | 9 | 50 | 850 | ||
| 1000 | 894 | 10 | 50 | 920 | ||
| 1200 | 1094 | 12 | 50 | 1070 | ||
| 1500 | 1394 | 15 | 50 | 1280 | ||
| 1800 | 1694 | 18 | 50 | 1490 | ||
[ ! ]No.40 Type enables relatively smooth sliding with little vibration because there is preload applied to the point where the slider and rail make contact.
| Part Number | L | Number of Mounting Holes M | ℓ1 | Rail Mass (g) |
| Connector Rail RSRT40 | 800 | 8 | 50 | 600 |
Alterations
| Alterations | Code | Spec. | ||||||
| Additional Slider | S | Sliders are added. Please specify additional slider quantity after S. ■Selection Example
[ ! ]Added sliders are the same size as that of the original part number model. [ NG ]Not applicable when ordering rails only. |
Specifications
|  |
| Type No. | 25 | 40 | ||||||
| Load Direction | Pa | Pb | Pc | Pd | Pa | Pb | Pc | Pd |
| Static Load Rating | 120N | 240N | 100N | 250N | 500N | 165N | ||
| Dynamic Load Rating | 40N | 80N | 30N | 75N | 150N | 50N | ||
| Clearance（mm） | 0.1 or less | 0.15 or less | 0 | 0 | ||||
[Notes] When using the roller slide rail in a wall-hanging arrangement, please properly place the workpiece so that no moment load is applied.
Applying a moment load may cause damage.
Part Number:
- In order to open the 3D preview, the part number must be fixed.
3D preview is not available, because the part number has not yet been determined.
| Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | Rail Material | Overall Length L (mm) | Rail Width (mm) | Width B (mm) | Slider (Block) Material | Rail Material | Clamp | |
|---|---|---|---|---|---|---|---|---|---|---|---|
- | 1 | 7 Days | EN 1.0330 Equiv. | 300 ～ 1800 | 40 | 94 | EN 1.0330 Equiv. | EN 1.0330 Equiv. | Set | ||
- | 1 | 7 Days | EN 1.0330 Equiv. | 300 ～ 1800 | 40 | 94 | - | EN 1.0330 Equiv. | Rail Only | ||
22.67 € | 1 | Available | 7 Days | EN 1.0330 Equiv. | 800 | 40 | 94 | - | EN 1.0330 Equiv. | Joint Rail |
Loading...
Configure
Basic Attributes
-
Overall Length L(mm)
-
Rail Width(mm)
- 25
- 40
-
Width B(mm)
-
Slider (Block) Material
- EN 1.0330 Equiv.
- EN 1.4301 Equiv.
-
Rail Material
- EN 1.0330 Equiv.
- Aluminum Alloy
-
Clamp
- Joint Rail
- Rail Only
- Set
-
Type
- RSR
- RSRR
- RSRT
-
Rail Material
- EN 1.0330 Equiv.
- Aluminum
-
Filter by CAD data type
- 2D
- 3D
Filter by standard shipping days
-
- All
- 7 Days or Less
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Complementary Products
-
stopper bolts / hexagon socket at head / regular thread / MC-Nylon locking head / steel / chromated
MISUMI Standard Price : 7.79 € Shipping Days: Same day
MISUMI Unit еxample related to this product
Tech Support
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.