Spring Plungers / Standard
- Promotional pricing
- Volume Discount
- Order quantities extended (D-JIT)
- Stock
(i)Remark
- Please check the content on our website as the PDF does not contain the most up-to-date information.
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
- Drawing / Specifications
- 3D Preview 3D preview is available after complete configuration
- Part Numbers
- Catalog
* Applicable only to with thread locking compound
[!] Thread Locking Treatment is
where anaerobic thread locking compound in micro
capsules is used to retain the threads. Once parts
have been loosened, adhesion is lost.
Use an anaerobic thread locking compound when
reassembling.
[!] The thread locking is
most effective by leaving the parts for 24 hours
or more and in 25°C. It should be noted if the parts
are left for short period of time and in low temperature,
the thread locking compound will be less-effective.
[ ! ] Do not use the rear hex socket at the time of mounting or removal.
[ ! ] Electroless Nickel Plating for only M3 and M4.
Load
min.
max.
| Load Category | TYPE | Body | Pin | Spring | Operating Temperature | |||||||
| With Thread Locking Compound | No Thread Locking Compound | |||||||||||
| M5 to M30 | M3 to M4 | M5 to M16 | [M] Material | [H] Hardness | [S] Surface Treatment | [M] Material | [H] Hardness | [S] Surface Treatment | [M] Material | |||
| Steel Nose | Ultra Light Load | PJS | PJS-N | M3 to M12:EN 1.7220 Equiv. M16:EN 1.1191 Equiv. | 29 to 35HRC | Black Oxide | EN 1.1191 Equiv. | 57 to 63HRC (Carburized) | Trivalent Chromate | JIS−SWP−B | -30 to 80°C | |
| Light Load | PJL | PJL-N | ||||||||||
| Heavy Load | PJH | PJH-N | Black Oxide | |||||||||
| Extra Heavy Load | PJX | PJX-N | Nickel Plating | |||||||||
| Plastic Nose | Ultra Light Load | NPJS | NPJS-N | Black Oxide | Polyacetal | - | - | |||||
| Light Load | NPJL | NPJL-N | ||||||||||
| Heavy Load | NPJH | NPJH-N | ||||||||||
| Extra Heavy Load | NPJX | — | Nickel Plating | |||||||||
Specification Table
| Part Number |
| NPJH3−1.5 PJS−N10−5 |
■With Thread Locking Compound
| Part Number | d | ℓ | L | B | Ultra Light Load | Light Load | Heavy Load | Extra Heavy Load | |||||||
| TYPE | M (Coarse Thread) | S | Ultra Light / Light / Heavy Load | Extremely Heavy Load | min. N max. Load | min. N max. Load | min. N max. Load | min. N max. Load | |||||||
| (Steep Tip) PJS (* only) PJL PJH PJX (* only) (Plastic Tip) NPJS (* only) NPJL (* only) NPJH (* only) NPJX (* only) | 5 | **3 | 2 | 20 (27) | 20 | 27 | 1.5 | 0.74 | 2.95 | 1.5 | 9.8 | 2 | 22.5 | 11 | 30.4 |
| **5 | 2 | 27 (39) | 27 | 39 | 1.5 | 0.72 | 2.95 | 1.6 | 10.4 | 2.5 | 23.4 | 11.6 | 31.5 | ||
| 6 | **3 | 2.5 | 25 (30) | 25 | 30 | 2 | 0.85 | 3.2 | 3.4 | 10.4 | 12.5 | 33.8 | 17.2 | 46.6 | |
| **5 | 2.5 | 30 (36) | 30 | 36 | 2 | 0.85 | 3.2 | 1.9 | 9.7 | 6.2 | 32.6 | 16.8 | 47.4 | ||
| 10 | 2.5 | 30 | 39 | - | 2 | - | - | 1.5 | 10.9 | 5 | 32.7 | - | - | ||
| 8 | **3 | 3.1 | 25 (27) | 25 | 27 | 2.5 | 0.9 | 3.3 | 3.5 | 9.4 | 11.7 | 31.2 | 28.1 | 56.9 | |
| **5 | 3.1 | 27 (30) | 27 | 35 | 2.5 | 0.9 | 3.3 | 2.9 | 9.6 | 8.3 | 31.9 | 10.5 | 39.9 | ||
| 10 | 3.1 | 30 | 43 | - | 2.5 | - | - | 3.1 | 11.2 | 8.4 | 36.4 | - | - | ||
| 10 | **5 | 3.8 | 30 | 30 | 35 | 3 | 1.9 | 4.7 | 2.6 | 14.1 | 11.4 | 51 | 17 | 73.7 | |
| **10 | 3.8 | 30 | 43 | 53 | 3 | 1.7 | 4.7 | 2.9 | 14.6 | 9.5 | 60.8 | 13.7 | 75.5 | ||
| 15 | 3.8 | 30 | 58 | - | 3 | - | - | 3.4 | 17 | 7.2 | 57.3 | - | - | ||
| 12 | **5 | 5.5 | 30 (35) | 30 | 43 | 4 | 1.5 | 4.7 | 3.5 | 17.1 | 5.6 | 41 | 35.3 | 107.9 | |
| **10 | 5.5 | 35 | 43 | 58 | 4 | 1.3 | 5.9 | 2.5 | 21.1 | 5.2 | 55.9 | 12.7 | 107.9 | ||
| **15 | 5.5 | 35 | 51 | 78 | 4 | 1.6 | 5.9 | 2.3 | 19.4 | 5.1 | 53.6 | 16.7 | 140.2 | ||
| 20 | 5.5 | 35 | 78 | - | 4 | - | - | 4.1 | 22.5 | 8.7 | 56.1 | - | - | ||
| 16 | **10 | 8 | 35 | 60 | 60 | 5 | 1.7 | 12.8 | 12.1 | 38 | 26.5 | 78 | 29.6 | 157.9 | |
| **15 | 8 | 35 | 60 | 70 | 5 | 1.7 | 12.8 | 9.7 | 39.7 | 14.2 | 79.4 | 10 | 142.2 | ||
| **20 | 8 | 35 | 85 | 90 | 5 | 1.7 | 12.8 | 8.6 | 40.1 | 16.8 | 80.4 | 4.3 | 146.1 | ||
| * 30 | 8 | 35 | 125 | 125 | 5 | - | - | 17 | 38 | 19.8 | 81.2 | 5.2 | 140.7 | ||
| 40 | 8 | 35 | 125 | - | 5 | 5.5 | 41.2 | 7.6 | 84.3 | - | - | ||||
| 50 | 8 | 35 | 155 | 5 | 4.4 | 48.3 | 7.5 | 78.8 | |||||||
| 60 | 8 | 35 | 159 | 5 | 4.1 | 49.6 | 6.4 | 78.1 | |||||||
| 70 | 8 | 35 | 185 | 5 | 3.1 | 55.7 | 4.3 | 95 | |||||||
| 80 | 8 | 35 | 185 | 5 | 2.5 | 51.3 | 3.2 | 103.5 | |||||||
| 20 | * 15 | 10 | 45 | 60 | 80 | 6 | 14.4 | 79.4 | 22.5 | 147.1 | 14.5 | 274.6 | |||
| 20 | 10 | 45 | 72 | 6 | 13.9 | 83.4 | 23 | 157.9 | - | - | |||||
| 30 | 10 | 45 | 96 | 6 | 13.6 | 88.3 | 18.6 | 154 | |||||||
| 40 | 10 | 45 | 120 | 6 | 13.4 | 109.8 | 26.8 | 195.1 | |||||||
[ ! ] ℓ dimensions enclosed with ( ) are applicable to the Extra Heavy Load Type | 24 | 7 | 10 | 45 | 60 | - | 10 | - | - | 27.8 | 65.9 | 40.7 | 127.9 | - | - |
| * 15 | 10 | 45 | 60 | 84 | 10 | 25.5 | 106.9 | 46.9 | 226.5 | 55.1 | 375.2 | ||||
| 20 | 10 | 45 | 75 | - | 10 | 15.3 | 101 | 43.1 | 224.6 | - | - | ||||
| 30 | 10 | 45 | 100 | 10 | 19.1 | 100 | 47.8 | 231.4 | |||||||
| 40 | 10 | 45 | 124 | 10 | 17.1 | 98.1 | 44.1 | 225.5 | |||||||
| 30 | 15 | 14 | 45 | 66 | 14 | 9.3 | 104.4 | 32.4 | 259.9 | ||||||
| 20 | 14 | 45 | 78 | 14 | 55.2 | 156.9 | 72.6 | 356.5 | |||||||
| 30 | 14 | 45 | 100 | 14 | 28.4 | 128.3 | 41.6 | 290.3 | |||||||
| 40 | 14 | 45 | 123 | 14 | 14.7 | 109.2 | 44.4 | 303 | |||||||
■No Thread Locking Compound
| Part Number | d | ℓ | L | B | Ultra Light Load | Light Load | Heavy Load | Extra Heavy Load | |||||||
| TYPE | M (Coarse Thread) | S | Ultra Light / Light / Heavy Load | Extremely Heavy Load | min. N max. Load | min. N max. Load | min. N max. Load | min. N max. Load | |||||||
| (Steep Tip) PJS PJL PJH PJX (Plastic Tip) NPJS NPJL NPJH NPJX | 3 | 1.5 | 1.1 | 10 (15) | 10 | 15 | 0.9 | 0.05 | 0.32 | 0.44 | 1.6 | 0.9 | 4.2 | 2.5 | 5.1 |
| 3 | 1.1 | 15 (20) | 15 | 20 | 0.9 | 0.09 | 0.32 | 0.29 | 1 | 1.1 | 4.9 | 2.5 | 6.8 | ||
| 4 | 2 | 1.6 | 15 (24) | 15 | 24 | 1.3 | 0.23 | 0.65 | 0.9 | 4.1 | 1.9 | 8.7 | 6.3 | 15.3 | |
| 4 | 1.6 | 24 | 24 | 24 | 1.3 | 0.24 | 0.65 | 0.7 | 2.2 | 0.29 | 8.3 | 4.8 | 15 | ||
| (Steep Tip) PJS-N PJL-N PJH-N PJX-N (Plastic Tip) NPJS-N NPJL-N NPJH-N [ ! ] ℓ dimensions enclosed with ( ) are applicable to the Extra Heavy Load Type | 5 | 3 | 2 | 20 (27) | 20 | 27 | 1.5 | 0.74 | 2.95 | 1.5 | 9.8 | 2 | 22.5 | 11 | 30.4 |
| 5 | 2 | 27 (39) | 27 | 39 | 1.5 | 0.72 | 2.95 | 1.6 | 10.4 | 2.5 | 23.4 | 11.6 | 31.5 | ||
| 6 | 3 | 2.5 | 25 (30) | 25 | 30 | 2 | 0.85 | 3.2 | 3.4 | 10.4 | 12.5 | 33.8 | 17.2 | 46.6 | |
| 5 | 2.5 | 30 (36) | 30 | 36 | 2 | 0.85 | 3.2 | 1.9 | 9.7 | 6.2 | 32.6 | 16.8 | 47.4 | ||
| 8 | 3 | 3.1 | 25 (27) | 25 | 27 | 2.5 | 0.9 | 3.3 | 3.5 | 9.4 | 11.7 | 31.2 | 28.1 | 56.9 | |
| 5 | 3.1 | 27 (30) | 27 | 35 | 2.5 | 0.9 | 3.3 | 2.9 | 9.6 | 8.3 | 31.9 | 10.5 | 39.9 | ||
| 10 | 5 | 3.8 | 30 | 30 | 35 | 3 | 1.9 | 4.7 | 2.6 | 14.1 | 11.4 | 51 | 17 | 73.7 | |
| 10 | 3.8 | 30 | 43 | 53 | 3 | 1.7 | 4.7 | 2.9 | 14.6 | 9.5 | 60.8 | 13.7 | 75.5 | ||
| 12 | 5 | 5.5 | 30 (35) | 30 | 43 | 4 | 1.5 | 4.7 | 3.5 | 17.1 | 5.6 | 41 | 35.3 | 107.9 | |
| 10 | 5.5 | 35 | 43 | 58 | 4 | 1.3 | 5.9 | 2.5 | 21.1 | 5.2 | 55.9 | 12.7 | 107.9 | ||
| 15 | 5.5 | 35 | 51 | 78 | 4 | 1.6 | 5.9 | 2.3 | 19.4 | 5.1 | 53.6 | 16.7 | 140.2 | ||
| 16 | 10 | 8 | 35 | 60 | 60 | 5 | 1.7 | 12.8 | 12.1 | 38 | 26.5 | 78 | 29.6 | 157.9 | |
| 15 | 8 | 35 | 60 | 70 | 5 | 1.7 | 12.8 | 9.7 | 39.7 | 14.2 | 79.4 | 10 | 142.2 | ||
| 20 | 8 | 35 | 85 | 90 | 5 | 1.7 | 12.8 | 8.6 | 40.1 | 16.8 | 80.4 | 4.3 | 146.1 | ||
Part Number:
- In order to open the 3D preview, the part number must be fixed.
3D preview is not available, because the part number has not yet been determined.
| Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | RoHS | Pin Material | O.D. M (mm) | Stroke (S) (mm) | Thread Locking Compound | Main Body Surface Treatment | Pin Surface Treatment | Tip Heat Treatment | Initial Load (Range) (N) | Min. Load (N) | Max. Load (N) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
4.16 € | 1 | Available |
Same day
Stock | 10 | [Resin] Polyacetal | 3 | 1.5 | Provided | Electroless Nickel Plating | Not Provided | Not Provided | 0.01 to 50 | 0.9 | 4.2 | |
4.78 € | 1 | Available |
Same day
Stock | 10 | [Resin] Polyacetal | 3 | 3 | Provided | Electroless Nickel Plating | Not Provided | Not Provided | 0.01 to 50 | 1.1 | 4.9 | |
4.16 € | 1 | Available |
Same day
Stock | 10 | [Resin] Polyacetal | 4 | 2 | Provided | Electroless Nickel Plating | Not Provided | Not Provided | 0.01 to 50 | 1.9 | 8.7 | |
4.78 € | 1 | Available |
Same day
Stock | 10 | [Resin] Polyacetal | 4 | 4 | Provided | Electroless Nickel Plating | Not Provided | Not Provided | 0.01 to 50 | 0.29 | 8.3 | |
4.16 € | 1 | Available | 5 Days | 10 | [Resin] Polyacetal | 5 | 3 | Provided | Electroless Nickel Plating | Not Provided | Not Provided | 0.01 to 50 | 2 | 22.5 | |
4.78 € | 1 | Available |
Same day
Stock | 10 | [Resin] Polyacetal | 5 | 5 | Provided | Electroless Nickel Plating | Not Provided | Not Provided | 0.01 to 50 | 2.5 | 23.4 | |
4.16 € | 1 | Available |
Same day
Stock | 10 | [Resin] Polyacetal | 6 | 3 | Provided | Electroless Nickel Plating | Not Provided | Not Provided | 0.01 to 50 | 12.5 | 33.8 | |
4.78 € | 1 | Available |
Same day
Stock | 10 | [Resin] Polyacetal | 6 | 5 | Provided | Electroless Nickel Plating | Not Provided | Not Provided | 0.01 to 50 | 6.2 | 32.6 | |
4.16 € | 1 | Available | 5 Days | 10 | [Resin] Polyacetal | 8 | 3 | Provided | Electroless Nickel Plating | Not Provided | Not Provided | 0.01 to 50 | 11.7 | 31.2 | |
4.78 € | 1 | Available | 5 Days | 10 | [Resin] Polyacetal | 8 | 5 | Provided | Electroless Nickel Plating | Not Provided | Not Provided | 0.01 to 50 | 8.3 | 31.9 | |
4.41 € | 1 | Available | 5 Days | 10 | [Resin] Polyacetal | 10 | 5 | Provided | Electroless Nickel Plating | Not Provided | Not Provided | 0.01 to 50 | 11.4 | 51 | |
5.65 € | 1 | Available |
Same day
Stock | 10 | [Resin] Polyacetal | 10 | 10 | Provided | Electroless Nickel Plating | Not Provided | Not Provided | 0.01 to 50 | 9.5 | 60.8 | |
4.78 € 2.01 € | 1 | Available |
Same day
Stock | 10 | [Resin] Polyacetal | 12 | 5 | Provided | Electroless Nickel Plating | Not Provided | Not Provided | 0.01 to 50 | 5.6 | 41 | |
6.30 € | 1 | Available | 5 Days | 10 | [Resin] Polyacetal | 12 | 10 | Provided | Electroless Nickel Plating | Not Provided | Not Provided | 0.01 to 50 | 5.2 | 55.9 | |
7.18 € | 1 | Available |
Same day
Stock | 10 | [Resin] Polyacetal | 12 | 15 | Provided | Electroless Nickel Plating | Not Provided | Not Provided | 0.01 to 50 | 5.1 | 53.6 | |
8.06 € | 1 | Available | 5 Days | 10 | [Resin] Polyacetal | 16 | 10 | Provided | Electroless Nickel Plating | Not Provided | Not Provided | 0.01 to 50 | 26.5 | 78 | |
8.06 € | 1 | Available | 5 Days | 10 | [Resin] Polyacetal | 16 | 15 | Provided | Electroless Nickel Plating | Not Provided | Not Provided | 0.01 to 50 | 14.2 | 79.4 | |
10.07 € | 1 | Available | 5 Days | 10 | [Resin] Polyacetal | 16 | 20 | Provided | Electroless Nickel Plating | Not Provided | Not Provided | 0.01 to 50 | 16.8 | 80.4 | |
14.36 € | 1 | Available |
Same day
Stock | 10 | [Resin] Polyacetal | 16 | 30 | Provided | Electroless Nickel Plating | Not Provided | Not Provided | 0.01 to 50 | 19.8 | 81.2 | |
11.97 € | 1 | Available | 5 Days | 10 | [Resin] Polyacetal | 20 | 15 | Provided | Electroless Nickel Plating | Not Provided | Not Provided | 0.01 to 50 | 22.5 | 147.1 | |
14.36 € | 1 | Available | 5 Days | 10 | [Resin] Polyacetal | 24 | 15 | Provided | Electroless Nickel Plating | Not Provided | Not Provided | 0.01 to 50 | 46.9 | 226.5 | |
4.16 € | 1 | Available | 5 Days | 10 | [Resin] Polyacetal | 5 | 3 | Not Provided | Electroless Nickel Plating | Not Provided | Not Provided | 0.01 to 50 | 2 | 22.5 | |
4.78 € | 1 | Available | 5 Days | 10 | [Resin] Polyacetal | 5 | 5 | Not Provided | Electroless Nickel Plating | Not Provided | Not Provided | 0.01 to 50 | 2.5 | 23.4 | |
4.16 € | 1 | Available | 5 Days | 10 | [Resin] Polyacetal | 6 | 3 | Not Provided | Electroless Nickel Plating | Not Provided | Not Provided | 0.01 to 50 | 12.5 | 33.8 | |
4.78 € | 1 | Available | 5 Days | 10 | [Resin] Polyacetal | 6 | 5 | Not Provided | Electroless Nickel Plating | Not Provided | Not Provided | 0.01 to 50 | 6.2 | 32.6 | |
4.16 € | 1 | Available | 5 Days | 10 | [Resin] Polyacetal | 8 | 3 | Not Provided | Electroless Nickel Plating | Not Provided | Not Provided | 0.01 to 50 | 11.7 | 31.2 | |
4.78 € | 1 | Available |
Same day
Stock | 10 | [Resin] Polyacetal | 8 | 5 | Not Provided | Electroless Nickel Plating | Not Provided | Not Provided | 0.01 to 50 | 8.3 | 31.9 | |
4.41 € | 1 | Available | 5 Days | 10 | [Resin] Polyacetal | 10 | 5 | Not Provided | Electroless Nickel Plating | Not Provided | Not Provided | 0.01 to 50 | 11.4 | 51 | |
5.65 € | 1 | Available | 5 Days | 10 | [Resin] Polyacetal | 10 | 10 | Not Provided | Electroless Nickel Plating | Not Provided | Not Provided | 0.01 to 50 | 9.5 | 60.8 | |
4.78 € | 1 | Available | 5 Days | 10 | [Resin] Polyacetal | 12 | 5 | Not Provided | Electroless Nickel Plating | Not Provided | Not Provided | 0.01 to 50 | 5.6 | 41 | |
6.30 € | 1 | Available | 5 Days | 10 | [Resin] Polyacetal | 12 | 10 | Not Provided | Electroless Nickel Plating | Not Provided | Not Provided | 0.01 to 50 | 5.2 | 55.9 | |
7.18 € | 1 | Available | 5 Days | 10 | [Resin] Polyacetal | 12 | 15 | Not Provided | Electroless Nickel Plating | Not Provided | Not Provided | 0.01 to 50 | 5.1 | 53.6 | |
8.06 € | 1 | Available | 7 Days | 10 | [Resin] Polyacetal | 16 | 10 | Not Provided | Electroless Nickel Plating | Not Provided | Not Provided | 0.01 to 50 | 26.5 | 78 | |
8.06 € | 1 | Available | 7 Days | 10 | [Resin] Polyacetal | 16 | 15 | Not Provided | Electroless Nickel Plating | Not Provided | Not Provided | 0.01 to 50 | 14.2 | 79.4 | |
10.07 € | 1 | Available | 7 Days | 10 | [Resin] Polyacetal | 16 | 20 | Not Provided | Electroless Nickel Plating | Not Provided | Not Provided | 0.01 to 50 | 16.8 | 80.4 | |
4.16 € | 1 | Available |
Same day
Stock | 10 | [Resin] Polyacetal | 3 | 1.5 | Provided | Black Oxide | Not Provided | Not Provided | 0.01 to 50 | 0.44 | 1.6 | |
4.78 € | 1 | Available |
Same day
Stock | 10 | [Resin] Polyacetal | 3 | 3 | Provided | Black Oxide | Not Provided | Not Provided | 0.01 to 50 | 0.29 | 1 | |
4.16 € | 1 | Available |
Same day
Stock | 10 | [Resin] Polyacetal | 4 | 2 | Provided | Black Oxide | Not Provided | Not Provided | 0.01 to 50 | 0.9 | 4.1 | |
4.78 € | 1 | Available |
Same day
Stock | 10 | [Resin] Polyacetal | 4 | 4 | Provided | Black Oxide | Not Provided | Not Provided | 0.01 to 50 | 0.7 | 2.2 | |
4.16 € | 1 | Available |
Same day
Stock | 10 | [Resin] Polyacetal | 5 | 3 | Provided | Black Oxide | Not Provided | Not Provided | 0.01 to 50 | 1.5 | 9.8 | |
4.78 € | 1 | Available |
Same day
Stock | 10 | [Resin] Polyacetal | 5 | 5 | Provided | Black Oxide | Not Provided | Not Provided | 0.01 to 50 | 1.6 | 10.4 | |
4.16 € | 1 | Available |
Same day
Stock | 10 | [Resin] Polyacetal | 6 | 3 | Provided | Black Oxide | Not Provided | Not Provided | 0.01 to 50 | 3.4 | 10.4 | |
4.78 € | 1 | Available | 5 Days | 10 | [Resin] Polyacetal | 6 | 5 | Provided | Black Oxide | Not Provided | Not Provided | 0.01 to 50 | 1.9 | 9.7 | |
4.16 € | 1 | Available | 5 Days | 10 | [Resin] Polyacetal | 8 | 3 | Provided | Black Oxide | Not Provided | Not Provided | 0.01 to 50 | 3.5 | 9.4 | |
4.78 € | 1 | Available | 5 Days | 10 | [Resin] Polyacetal | 8 | 5 | Provided | Black Oxide | Not Provided | Not Provided | 0.01 to 50 | 2.9 | 9.6 | |
4.41 € | 1 | Available | 5 Days | 10 | [Resin] Polyacetal | 10 | 5 | Provided | Black Oxide | Not Provided | Not Provided | 0.01 to 50 | 2.8 | 14.1 | |
5.65 € | 1 | Available |
Same day
Stock | 10 | [Resin] Polyacetal | 10 | 10 | Provided | Black Oxide | Not Provided | Not Provided | 0.01 to 50 | 2.9 | 14.6 | |
4.78 € 2.10 € | 1 | Available |
Same day
Stock | 10 | [Resin] Polyacetal | 12 | 5 | Provided | Black Oxide | Not Provided | Not Provided | 0.01 to 50 | 3.5 | 17.1 | |
6.30 € | 1 | Available | 5 Days | 10 | [Resin] Polyacetal | 12 | 10 | Provided | Black Oxide | Not Provided | Not Provided | 0.01 to 50 | 2.5 | 21.1 | |
7.18 € | 1 | Available |
Same day
Stock | 10 | [Resin] Polyacetal | 12 | 15 | Provided | Black Oxide | Not Provided | Not Provided | 0.01 to 50 | 2.3 | 19.4 | |
8.06 € | 1 | Available | 5 Days | 10 | [Resin] Polyacetal | 16 | 10 | Provided | Black Oxide | Not Provided | Not Provided | 0.01 to 50 | 12.1 | 38 | |
8.06 € | 1 | Available | 5 Days | 10 | [Resin] Polyacetal | 16 | 15 | Provided | Black Oxide | Not Provided | Not Provided | 0.01 to 50 | 9.7 | 39.7 | |
10.07 € 5.04 € | 1 | Available |
Same day
Stock | 10 | [Resin] Polyacetal | 16 | 20 | Provided | Black Oxide | Not Provided | Not Provided | 0.01 to 50 | 8.6 | 40.1 | |
14.36 € | 1 | Available | 5 Days | 10 | [Resin] Polyacetal | 16 | 30 | Provided | Black Oxide | Not Provided | Not Provided | 0.01 to 50 | 17 | 38 | |
11.97 € | 1 | Available | 5 Days | 10 | [Resin] Polyacetal | 20 | 15 | Provided | Black Oxide | Not Provided | Not Provided | 0.01 to 50 | 14.4 | 79.4 | |
14.36 € | 1 | Available | 5 Days | 10 | [Resin] Polyacetal | 24 | 15 | Provided | Black Oxide | Not Provided | Not Provided | 0.01 to 50 | 25.5 | 106.9 | |
4.16 € | 1 | Available | 5 Days | 10 | [Resin] Polyacetal | 5 | 3 | Not Provided | Electroless Nickel Plating | Not Provided | Not Provided | 0.01 to 50 | 1.5 | 9.8 | |
4.78 € | 1 | Available |
Same day
Stock | 10 | [Resin] Polyacetal | 5 | 5 | Not Provided | Electroless Nickel Plating | Not Provided | Not Provided | 0.01 to 50 | 1.6 | 10.4 | |
4.16 € | 1 | Available | 5 Days | 10 | [Resin] Polyacetal | 6 | 3 | Not Provided | Electroless Nickel Plating | Not Provided | Not Provided | 0.01 to 50 | 3.4 | 10.4 | |
4.78 € | 1 | Available |
Same day
Stock | 10 | [Resin] Polyacetal | 6 | 5 | Not Provided | Electroless Nickel Plating | Not Provided | Not Provided | 0.01 to 50 | 1.9 | 9.7 |
Loading...
Basic information
| Body Material | EN 1.1191 Equiv. | Mounting Method | Screw-In | Pin Plunger Type | Spherical Type |
|---|---|---|---|---|---|
| Wrench Hole Shape | Hex |
Configure
Stock
-
- Show only stock items
Basic Attributes
-
Pin Material
- Steel
- Resin
- Steel
-
O.D. M(mm)
-
Stroke (S)(mm)
-
Thread Locking Compound
- Not Provided
- Provided
-
Main Body Surface Treatment
- Black Oxide
- Electroless Nickel Plating
-
Pin Surface Treatment
- Not Provided
- Black Oxide
- Trivalent Chromate
-
Tip Heat Treatment
- Not Provided
- Carburized
-
Initial Load (Range)(N)
- 0.01 to 50
- 50.01 to 100
-
Min. Load(N)
- 0.05
- 0.09
- 0.23
- 0.24
- 0.29
- 0.44
- 0.49
- 0.59
- 0.7
- 0.72
- 0.74
- 0.78
- 0.85
- 0.9
- 1
- 1.1
- 1.3
- 1.4
- 1.5
- 1.6
- 1.7
- 1.8
- 1.9
- 2
- 2.2
- 2.3
- 2.5
- 2.8
- 2.9
- 3
- 3.4
- 3.5
- 3.9
- 4.3
- 4.8
- 4.9
- 5
- 5.1
- 5.2
- 5.5
- 5.6
- 5.9
- 6.2
- 6.9
- 7
- 7.8
- 8.3
- 8.6
- 8.8
- 9.1
- 9.5
- 9.7
- 9.8
- 10
- 10.5
- 11
- 11.4
- 11.6
- 11.7
- 12.1
- 12.5
- 12.7
- 13.7
- 14.1
- 14.2
- 14.4
- 14.7
- 14.9
- 15.7
- 16.7
- 16.8
- 17
- 17.2
- 17.7
- 18.6
- 19.6
- 19.8
- 21.6
- 22.5
- 22.6
- 23.5
- 24.5
- 25.5
- 26.5
- 27.5
- 28.1
- 29.4
- 29.6
- 35.3
- 37.2
- 44.1
- 45.1
- 46.9
- 47.1
- 53
-
Type
- NPJH
- NPJH-N
- NPJL
- NPJL-N
- NPJS
- NPJS-N
- NPJX
- PJH
- PJH-N
- PJL
- PJL-N
- PJS
- PJS-N
- PJX
- PJX-N
-
Filter by CAD data type
- 2D
- 3D
Filter by standard shipping days
-
- All
- Same day
- 5 Days or Less
- 7 Days or Less
- 9 Days or Less
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Complementary Products
-
stopper bolts / hexagon socket at head / regular thread / MC-Nylon locking head / steel / chromated
MISUMI Standard Price : 7.79 € Shipping Days: Same day
MISUMI Unit еxample related to this product
Tech Support
- Technical Support
- Tel：+49 69 668173-0 / FAX：+49 69 668173-360
- Technical Inquiry
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.