• Brands
  • Company
  • Contact
EN / UK
Type Code Seach | *NOT READY*
#CODE
Keyword suggestions
Part number suggestions
Discontinued Products

Slot Pins for Inspection Jigs / Stepped Diamond / Straight Type

Slot Pins for Inspection Jigs / Stepped Diamond / Straight Type

MISUMI

MISUMI

Data sheet

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

[ ! ]3

[ ! ]5

[ ! ]5

[ ! ]3

[ ! ]5

[ ! ]5

[ ! ]3

[ ! ]5

[ ! ]5

[ ! ]3

[ ! ]5

[ ! ]5

[ ! ]6

Slot Pins for Inspection Components - Stepped Diamond Straight, Round Tip Type: Related Image

(1) Round tip type
Small Head: D = 8 to 25

(2) Tip cut type
Small Head: D = 8 to 25

Large Head: D = 10 L to 20 L" ! "4

Large Head: D = 10 L to 20 L" ! "4

[ ! ] Large Head Type (D = 10 L to 20 L) is available for EN 1.1191 Equiv. only.
[!] This product is hardened for the entire part.
[ ! ] 1. For electroless nickel plating, please specify the alteration MN.
[ ! ] 2. EN 1.4125 Equiv. or 13Cr stainless steel has an identification groove on D part.
[ ! ] 3. For shorter handle length, specify the alteration ZC.
[ ! ] 4. Dimensions not specified are the same as those of Small Head Type.
[!] 5. There is a relief groove that is approx. 1 mm wide (approx. 0.2 mm deep). To eliminate relief groove, specify the alteration NMN.
[ ! ]6 K ≥ (S+0.3)
Slot Pins for Inspection Components - Stepped Diamond Straight, Round Tip Type: Related Image

Reference: sin30° = 0.5
cos30° ≒ 0.866

[!] Unless otherwise specified, the dimension tolerance conforms to JIS B 0405 Class m. However, chamfer tolerances, tapped depth, and angular dimension tolerances are excluded.
[M]Material [!] 1[H] Hardness(1) Round tip type(2) Tip cut type
TYPETYPE
S 0
−0.02		Sg6S 0
−0.02/F 0
−0.05		Sg6/F 0
−0.03
EN 1.1191 Equiv.-KJPDKMKJPGDKMKJPDKKJPGDK
EN 1.1191 Equiv.45HRC or more-KJPGDKMHKJPDHKKJPGDHK
EN 1.4301 Equiv.--KJPGDKMSKJPDKSKJPGDKS
[ ! ] 2 EN 1.4125 Equiv. or
13Cr Stainless Steel		45 to 50HRC---KJPGDKC

Specification Table

Part Number (TYPE·D)—P—S—F—L—B
KJPDK12—P8.00—S6.00—F2.2—L10—B10
Sg6
3.00−0.002
−0.008
3.01 to 6.00−0.004
−0.012
6.01 to 10.00−0.005
−0.014
10.01 to 18.00−0.006
−0.017
18.01 to 29.00−0.007
−0.020
Part Number0.01 mm Increments0.1 mm Increments1 mm Increments(W)M
(Coarse)
(1) Round tip type(2) Tip cut typeDPS (P > S)F (F < S/2)
(2) Tip cut type only		LB
(S 0
−0.02)		(Sg6)(S 0
−0.02/F 0
−0.05)		(Sg6/F 0
−0.03)
(EN 1.1191 Equiv.)
KJPDKM		(EN 1.1191 Equiv.)
KJPGDKM

(EN 1.1191 Equiv. (hardened))
KJPGDKMH

(EN 1.4301 Equiv.)
KJPGDKMS		(EN 1.1191 Equiv.)
KJPDK

(EN 1.1191 Equiv. (hardened))
KJPDHK

(EN 1.4301 Equiv.)
KJPDKS		(EN 1.1191 Equiv.)
KJPGDK

(EN 1.1191 Equiv. (hardened))
KJPGDHK

(EN 1.4301 Equiv.)
KJPGDKS

(EN 1.4125 Equiv. or
13Cr Stainless Steel)
KJPGDKC		84.00 to 6.003.00 to 5.000.3 to 2.05 to 105 to 152M4
104.00 to 8.003.00 to 7.000.3 to 3.05 to 25

For EN 1.4301 Equiv.
L ≤ P × 5		5 to 25

For EN 1.4301 Equiv.
B ≤ S × 5		2M5
126.00 to 10.003.00 to 9.000.3 to 4.03M5
168.00 to 14.003.00 to 13.000.5 to 6.04M5
2012.00 to 18.005.00 to 17.001.0 to 8.06M5
2516.00 to 23.008.00 to 22.002.0 to 10.08M5
10 L10.00 to 16.005.00 to 15.001.0 to 7.04M5
12 L12.00 to 20.006.00 to 19.002.0 to 9.06M5
16 L16.00 to 25.008.00 to 24.002.0 to 11.08M5
20 L20.00 to 30.0010.00 to 29.002.0 to 14.08M5
[ ! ] Please select S dimension so that S section is smaller than the diamond section.

Alterations

Part Number—P—S—F—L—B—(CH·KH·PKC ... etc.)
KJPDK12
KJPDKM20		—
—		P8.00
P17.90 		—
—		S6.00
S10		—F2.2 —
—		L10
L15		—
—		B10
B20		—
—		CH
ZC10
AlterationsCodeSpec.

Chain

Slot Pins for Inspection Components - Stepped Diamond Straight, Round Tip Type: Related Image		CHLoss-proof chain (length 600 mm) is attached to gauge body.
Additional Surface Treatment
(Electroless Nickel Plating)		MNElectroless nickel plating is applied.
[ ! ] Applicable to Material EN 1.1191 Equiv. only
[ NG ] Combination with STC is not available.
Additional Surface Treatment
(Black Oxide)		STCAdds black oxide surface treatment.
[ ! ] Applicable to Material EN 1.1191 Equiv. only
[ NG ]Combination with MN is not available.

Engraving of P Dimension

Slot Pins for Inspection Components - Stepped Diamond Straight, Round Tip Type: Related Image		KHMachines flats on knurled head and engraves P dimension (with the character orientation arbitrary).
[ NG ] Not applicable to handle length 10
AlterationsCodeSpec.

P Dimension Tolerance

Slot Pins for Inspection Components - Stepped Diamond Straight, Round Tip Type: Related Image		PKCChanges P dimension tolerance to g6.

No Relief Groove

Slot Pins for Inspection Components - Stepped Diamond Straight, Round Tip Type: Related Image		NMNOmits the relief groove between knurled part and straight part on the step.
[ NG ] Not applicable to Large Head Type

Handle Length

Slot Pins for Inspection Components - Stepped Diamond Straight, Round Tip Type: Related Image		ZCChanges handle length 50 to 10, 20, 30 or 40.
Ordering Code ZC20

[ ! ] Handle length 10 and 20 are available only when P ≥ 5 and pin length (L + B) ≤ 30.

[ ! ] For Large Head Type, only ZC30 and 40 are applicable.

[ NG ] For handle length 10, there is no tapped hole.

[ NG ] For handle length 10, combination with KH is not available.

Part Number:  

    3D preview is not available, because the part number has not yet been determined.

  • In order to open the 3D preview, the part number must be fixed.
Loading...

Plug-in is required for 3D Preview

CAD Download

Data to be displayed
30
45
60
  1. 1
  2. 2
  3. Next >>
Part Number
KJPDHK8-P[4-6/0.01]-S[3-5/0.01]-F[0-2/0.1]-L[5-10/1]-B[5-15/1]
KJPDHK10-P[4-8/0.01]-S[3-7/0.01]-F[0-3/0.1]-L[5-25/1]-B[5-25/1]
KJPDHK10L-P[10-16/0.01]-S[5-15/0.01]-F[1-7/0.1]-L[5-25/1]-B[5-25/1]
KJPDHK12-P[6-10/0.01]-S[3-9/0.01]-F[0-4/0.1]-L[5-25/1]-B[5-25/1]
KJPDHK12L-P[12-20/0.01]-S[6-19/0.01]-F[2-9/0.1]-L[5-25/1]-B[5-25/1]
KJPDHK16-P[8-14/0.01]-S[3-13/0.01]-F[0-6/0.1]-L[5-25/1]-B[5-25/1]
KJPDHK16L-P[16-25/0.01]-S[8-24/0.01]-F[2-11/0.1]-L[5-25/1]-B[5-25/1]
KJPDHK20-P[12-18/0.01]-S[5-17/0.01]-F[1-8/0.1]-L[5-25/1]-B[5-25/1]
KJPDHK20L-P[20-30/0.01]-S[10-29/0.01]-F[2-14/0.1]-L[5-25/1]-B[5-25/1]
KJPDHK25-P[16-23/0.01]-S[8-22/0.01]-F[2-10/0.1]-L[5-25/1]-B[5-25/1]
KJPDK8-P[4-6/0.01]-S[3-5/0.01]-F[0-2/0.1]-L[5-10/1]-B[5-15/1]
KJPDK10-P[4-8/0.01]-S[3-7/0.01]-F[0-3/0.1]-L[5-25/1]-B[5-25/1]
KJPDK10L-P[10-16/0.01]-S[5-15/0.01]-F[1-7/0.1]-L[5-25/1]-B[5-25/1]
KJPDK12-P[6-10/0.01]-S[3-9/0.01]-F[0-4/0.1]-L[5-25/1]-B[5-25/1]
KJPDK12L-P[12-20/0.01]-S[6-19/0.01]-F[2-9/0.1]-L[5-25/1]-B[5-25/1]
KJPDK16-P[8-14/0.01]-S[3-13/0.01]-F[0-6/0.1]-L[5-25/1]-B[5-25/1]
KJPDK16L-P[16-25/0.01]-S[8-24/0.01]-F[2-11/0.1]-L[5-25/1]-B[5-25/1]
KJPDK20-P[12-18/0.01]-S[5-17/0.01]-F[1-8/0.1]-L[5-25/1]-B[5-25/1]
KJPDK20L-P[20-30/0.01]-S[10-29/0.01]-F[2-14/0.1]-L[5-25/1]-B[5-25/1]
KJPDK25-P[16-23/0.01]-S[8-22/0.01]-F[2-10/0.1]-L[5-25/1]-B[5-25/1]
KJPDKM8-P[4-6/0.01]-S[3-5/0.01]-L[5-10/1]-B[5-15/1]
KJPDKM10-P[4-8/0.01]-S[3-7/0.01]-L[5-25/1]-B[5-25/1]
KJPDKM10L-P[10-16/0.01]-S[5-15/0.01]-L[5-25/1]-B[5-25/1]
KJPDKM12-P[6-10/0.01]-S[3-9/0.01]-L[5-25/1]-B[5-25/1]
KJPDKM12L-P[12-20/0.01]-S[6-19/0.01]-L[5-25/1]-B[5-25/1]
KJPDKM16-P[8-14/0.01]-S[3-13/0.01]-L[5-25/1]-B[5-25/1]
KJPDKM16L-P[16-25/0.01]-S[8-24/0.01]-L[5-25/1]-B[5-25/1]
KJPDKM20-P[12-18/0.01]-S[5-17/0.01]-L[5-25/1]-B[5-25/1]
KJPDKM20L-P[20-30/0.01]-S[10-29/0.01]-L[5-25/1]-B[5-25/1]
KJPDKM25-P[16-23/0.01]-S[8-22/0.01]-L[5-25/1]-B[5-25/1]
KJPDKS8-P[4-6/0.01]-S[3-5/0.01]-F[0-2/0.1]-L[5-10/1]-B[5-15/1]
KJPDKS10-P[4-8/0.01]-S[3-7/0.01]-F[0-3/0.1]-L[5-25/1]-B[5-25/1]
KJPDKS12-P[6-10/0.01]-S[3-9/0.01]-F[0-4/0.1]-L[5-25/1]-B[5-25/1]
KJPDKS16-P[8-14/0.01]-S[3-13/0.01]-F[0-6/0.1]-L[5-25/1]-B[5-25/1]
KJPDKS20-P[12-18/0.01]-S[5-17/0.01]-F[1-8/0.1]-L[5-25/1]-B[5-25/1]
KJPDKS25-P[16-23/0.01]-S[8-22/0.01]-F[2-10/0.1]-L[5-25/1]-B[5-25/1]
KJPGDHK8-P[4-6/0.01]-S[3-5/0.01]-F[0-2/0.1]-L[5-10/1]-B[5-15/1]
KJPGDHK10-P[4-8/0.01]-S[3-7/0.01]-F[0-3/0.1]-L[5-25/1]-B[5-25/1]
KJPGDHK10L-P[10-16/0.01]-S[5-15/0.01]-F[1-7/0.1]-L[5-25/1]-B[5-25/1]
KJPGDHK12-P[6-10/0.01]-S[3-9/0.01]-F[0-4/0.1]-L[5-25/1]-B[5-25/1]
KJPGDHK12L-P[12-20/0.01]-S[6-19/0.01]-F[2-9/0.1]-L[5-25/1]-B[5-25/1]
KJPGDHK16-P[8-14/0.01]-S[3-13/0.01]-F[0-6/0.1]-L[5-25/1]-B[5-25/1]
KJPGDHK16L-P[16-25/0.01]-S[8-24/0.01]-F[2-11/0.1]-L[5-25/1]-B[5-25/1]
KJPGDHK20-P[12-18/0.01]-S[5-17/0.01]-F[1-8/0.1]-L[5-25/1]-B[5-25/1]
KJPGDHK20L-P[20-30/0.01]-S[10-29/0.01]-F[2-14/0.1]-L[5-25/1]-B[5-25/1]
KJPGDHK25-P[16-23/0.01]-S[8-22/0.01]-F[2-10/0.1]-L[5-25/1]-B[5-25/1]
KJPGDK8-P[4-6/0.01]-S[3-5/0.01]-F[0-2/0.1]-L[5-10/1]-B[5-15/1]
KJPGDK10-P[4-8/0.01]-S[3-7/0.01]-F[0-3/0.1]-L[5-25/1]-B[5-25/1]
KJPGDK10L-P[10-16/0.01]-S[5-15/0.01]-F[1-7/0.1]-L[5-25/1]-B[5-25/1]
KJPGDK12-P[6-10/0.01]-S[3-9/0.01]-F[0-4/0.1]-L[5-25/1]-B[5-25/1]
KJPGDK12L-P[12-20/0.01]-S[6-19/0.01]-F[2-9/0.1]-L[5-25/1]-B[5-25/1]
KJPGDK16-P[8-14/0.01]-S[3-13/0.01]-F[0-6/0.1]-L[5-25/1]-B[5-25/1]
KJPGDK16L-P[16-25/0.01]-S[8-24/0.01]-F[2-11/0.1]-L[5-25/1]-B[5-25/1]
KJPGDK20-P[12-18/0.01]-S[5-17/0.01]-F[1-8/0.1]-L[5-25/1]-B[5-25/1]
KJPGDK20L-P[20-30/0.01]-S[10-29/0.01]-F[2-14/0.1]-L[5-25/1]-B[5-25/1]
KJPGDK25-P[16-23/0.01]-S[8-22/0.01]-F[2-10/0.1]-L[5-25/1]-B[5-25/1]
KJPGDKC8-P[4-6/0.01]-S[3-5/0.01]-F[0-2/0.1]-L[5-10/1]-B[5-15/1]
KJPGDKC10-P[4-8/0.01]-S[3-7/0.01]-F[0-3/0.1]-L[5-25/1]-B[5-25/1]
KJPGDKC12-P[6-10/0.01]-S[3-9/0.01]-F[0-4/0.1]-L[5-25/1]-B[5-25/1]
KJPGDKC16-P[8-14/0.01]-S[3-13/0.01]-F[0-6/0.1]-L[5-25/1]-B[5-25/1]
Part Number
Standard Unit Price
Minimum order quantityVolume Discount
Standard
Shipping Days
?
RoHSTip Shape Material Hardness Large Head/Small Head Insertion Part S Dimension Tolerance Outer Dia. D
(Ø) 		B
(mm) 		F
(mm) 		L
(mm) 		P
(mm) 		S
(mm)

-

1 9 Days 10D Cut[Steel] EN 1.1191 Equiv.45HRC ~Small Head0/-0.0285 ～ 150 ～ 25 ～ 104 ～ 63 ～ 5

-

1 9 Days 10D Cut[Steel] EN 1.1191 Equiv.45HRC ~Small Head0/-0.02105 ～ 250 ～ 35 ～ 254 ～ 83 ～ 7

-

1 9 Days 10D Cut[Steel] EN 1.1191 Equiv.45HRC ~Large Head0/-0.02105 ～ 251 ～ 75 ～ 2510 ～ 165 ～ 15

-

1 9 Days 10D Cut[Steel] EN 1.1191 Equiv.45HRC ~Small Head0/-0.02125 ～ 250 ～ 45 ～ 256 ～ 103 ～ 9

-

1 9 Days 10D Cut[Steel] EN 1.1191 Equiv.45HRC ~Large Head0/-0.02125 ～ 252 ～ 95 ～ 2512 ～ 206 ～ 19

-

1 9 Days 10D Cut[Steel] EN 1.1191 Equiv.45HRC ~Small Head0/-0.02165 ～ 250 ～ 65 ～ 258 ～ 143 ～ 13

-

1 9 Days 10D Cut[Steel] EN 1.1191 Equiv.45HRC ~Large Head0/-0.02165 ～ 252 ～ 115 ～ 2516 ～ 258 ～ 24

-

1 9 Days 10D Cut[Steel] EN 1.1191 Equiv.45HRC ~Small Head0/-0.02205 ～ 251 ～ 85 ～ 2512 ～ 185 ～ 17

-

1 9 Days 10D Cut[Steel] EN 1.1191 Equiv.45HRC ~Large Head0/-0.02205 ～ 252 ～ 145 ～ 2520 ～ 3010 ～ 29

-

1 9 Days 10D Cut[Steel] EN 1.1191 Equiv.45HRC ~Small Head0/-0.02255 ～ 252 ～ 105 ～ 2516 ～ 238 ～ 22

-

1 9 Days 10D Cut[Steel] EN 1.1191 Equiv.No HardenedSmall Head0/-0.0285 ～ 150 ～ 25 ～ 104 ～ 63 ～ 5

-

1 9 Days 10D Cut[Steel] EN 1.1191 Equiv.No HardenedSmall Head0/-0.02105 ～ 250 ～ 35 ～ 254 ～ 83 ～ 7

-

1 9 Days 10D Cut[Steel] EN 1.1191 Equiv.No HardenedLarge Head0/-0.02105 ～ 251 ～ 75 ～ 2510 ～ 165 ～ 15

-

1 9 Days 10D Cut[Steel] EN 1.1191 Equiv.No HardenedSmall Head0/-0.02125 ～ 250 ～ 45 ～ 256 ～ 103 ～ 9

-

1 9 Days 10D Cut[Steel] EN 1.1191 Equiv.No HardenedLarge Head0/-0.02125 ～ 252 ～ 95 ～ 2512 ～ 206 ～ 19

-

1 9 Days 10D Cut[Steel] EN 1.1191 Equiv.No HardenedSmall Head0/-0.02165 ～ 250 ～ 65 ～ 258 ～ 143 ～ 13

-

1 9 Days 10D Cut[Steel] EN 1.1191 Equiv.No HardenedLarge Head0/-0.02165 ～ 252 ～ 115 ～ 2516 ～ 258 ～ 24

-

1 9 Days 10D Cut[Steel] EN 1.1191 Equiv.No HardenedSmall Head0/-0.02205 ～ 251 ～ 85 ～ 2512 ～ 185 ～ 17

-

1 9 Days 10D Cut[Steel] EN 1.1191 Equiv.No HardenedLarge Head0/-0.02205 ～ 252 ～ 145 ～ 2520 ～ 3010 ～ 29

-

1 9 Days 10D Cut[Steel] EN 1.1191 Equiv.No HardenedSmall Head0/-0.02255 ～ 252 ～ 105 ～ 2516 ～ 238 ～ 22

-

1 9 Days 10Circular Shape[Steel] EN 1.1191 Equiv.No HardenedSmall Head0/-0.0285 ～ 15-5 ～ 104 ～ 63 ～ 5

-

1 9 Days 10Circular Shape[Steel] EN 1.1191 Equiv.No HardenedSmall Head0/-0.02105 ～ 25-5 ～ 254 ～ 83 ～ 7

-

1 9 Days 10Circular Shape[Steel] EN 1.1191 Equiv.No HardenedLarge Head0/-0.02105 ～ 25-5 ～ 2510 ～ 165 ～ 15

-

1 9 Days 10Circular Shape[Steel] EN 1.1191 Equiv.No HardenedSmall Head0/-0.02125 ～ 25-5 ～ 256 ～ 103 ～ 9

-

1 9 Days 10Circular Shape[Steel] EN 1.1191 Equiv.No HardenedLarge Head0/-0.02125 ～ 25-5 ～ 2512 ～ 206 ～ 19

-

1 9 Days 10Circular Shape[Steel] EN 1.1191 Equiv.No HardenedSmall Head0/-0.02165 ～ 25-5 ～ 258 ～ 143 ～ 13

-

1 9 Days 10Circular Shape[Steel] EN 1.1191 Equiv.No HardenedLarge Head0/-0.02165 ～ 25-5 ～ 2516 ～ 258 ～ 24

-

1 9 Days 10Circular Shape[Steel] EN 1.1191 Equiv.No HardenedSmall Head0/-0.02205 ～ 25-5 ～ 2512 ～ 185 ～ 17

-

1 9 Days 10Circular Shape[Steel] EN 1.1191 Equiv.No HardenedLarge Head0/-0.02205 ～ 25-5 ～ 2520 ～ 3010 ～ 29

-

1 9 Days 10Circular Shape[Steel] EN 1.1191 Equiv.No HardenedSmall Head0/-0.02255 ～ 25-5 ～ 2516 ～ 238 ～ 22

-

1 9 Days 10D Cut[Stainless Steel] EN 1.4301 Equiv.No HardenedSmall Head0/-0.0285 ～ 150 ～ 25 ～ 104 ～ 63 ～ 5

-

1 9 Days 10D Cut[Stainless Steel] EN 1.4301 Equiv.No HardenedSmall Head0/-0.02105 ～ 250 ～ 35 ～ 254 ～ 83 ～ 7

-

1 9 Days 10D Cut[Stainless Steel] EN 1.4301 Equiv.No HardenedSmall Head0/-0.02125 ～ 250 ～ 45 ～ 256 ～ 103 ～ 9

-

1 9 Days 10D Cut[Stainless Steel] EN 1.4301 Equiv.No HardenedSmall Head0/-0.02165 ～ 250 ～ 65 ～ 258 ～ 143 ～ 13

-

1 9 Days 10D Cut[Stainless Steel] EN 1.4301 Equiv.No HardenedSmall Head0/-0.02205 ～ 251 ～ 85 ～ 2512 ～ 185 ～ 17

-

1 9 Days 10D Cut[Stainless Steel] EN 1.4301 Equiv.No HardenedSmall Head0/-0.02255 ～ 252 ～ 105 ～ 2516 ～ 238 ～ 22

-

1 9 Days 10D Cut[Steel] EN 1.1191 Equiv.45HRC ~Small Headg685 ～ 150 ～ 25 ～ 104 ～ 63 ～ 5

-

1 9 Days 10D Cut[Steel] EN 1.1191 Equiv.45HRC ~Small Headg6105 ～ 250 ～ 35 ～ 254 ～ 83 ～ 7

-

1 9 Days 10D Cut[Steel] EN 1.1191 Equiv.45HRC ~Large Headg6105 ～ 251 ～ 75 ～ 2510 ～ 165 ～ 15

-

1 9 Days 10D Cut[Steel] EN 1.1191 Equiv.45HRC ~Small Headg6125 ～ 250 ～ 45 ～ 256 ～ 103 ～ 9

-

1 9 Days 10D Cut[Steel] EN 1.1191 Equiv.45HRC ~Large Headg6125 ～ 252 ～ 95 ～ 2512 ～ 206 ～ 19

-

1 9 Days 10D Cut[Steel] EN 1.1191 Equiv.45HRC ~Small Headg6165 ～ 250 ～ 65 ～ 258 ～ 143 ～ 13

-

1 9 Days 10D Cut[Steel] EN 1.1191 Equiv.45HRC ~Large Headg6165 ～ 252 ～ 115 ～ 2516 ～ 258 ～ 24

-

1 9 Days 10D Cut[Steel] EN 1.1191 Equiv.45HRC ~Small Headg6205 ～ 251 ～ 85 ～ 2512 ～ 185 ～ 17

-

1 9 Days 10D Cut[Steel] EN 1.1191 Equiv.45HRC ~Large Headg6205 ～ 252 ～ 145 ～ 2520 ～ 3010 ～ 29

-

1 9 Days 10D Cut[Steel] EN 1.1191 Equiv.45HRC ~Small Headg6255 ～ 252 ～ 105 ～ 2516 ～ 238 ～ 22

-

1 9 Days 10D Cut[Steel] EN 1.1191 Equiv.No HardenedSmall Headg685 ～ 150 ～ 25 ～ 104 ～ 63 ～ 5

-

1 9 Days 10D Cut[Steel] EN 1.1191 Equiv.No HardenedSmall Headg6105 ～ 250 ～ 35 ～ 254 ～ 83 ～ 7

-

1 9 Days 10D Cut[Steel] EN 1.1191 Equiv.No HardenedLarge Headg6105 ～ 251 ～ 75 ～ 2510 ～ 165 ～ 15

-

1 9 Days 10D Cut[Steel] EN 1.1191 Equiv.No HardenedSmall Headg6125 ～ 250 ～ 45 ～ 256 ～ 103 ～ 9

-

1 9 Days 10D Cut[Steel] EN 1.1191 Equiv.No HardenedLarge Headg6125 ～ 252 ～ 95 ～ 2512 ～ 206 ～ 19

-

1 9 Days 10D Cut[Steel] EN 1.1191 Equiv.No HardenedSmall Headg6165 ～ 250 ～ 65 ～ 258 ～ 143 ～ 13

-

1 9 Days 10D Cut[Steel] EN 1.1191 Equiv.No HardenedLarge Headg6165 ～ 252 ～ 115 ～ 2516 ～ 258 ～ 24

-

1 9 Days 10D Cut[Steel] EN 1.1191 Equiv.No HardenedSmall Headg6205 ～ 251 ～ 85 ～ 2512 ～ 185 ～ 17

-

1 9 Days 10D Cut[Steel] EN 1.1191 Equiv.No HardenedLarge Headg6205 ～ 252 ～ 145 ～ 2520 ～ 3010 ～ 29

-

1 9 Days 10D Cut[Steel] EN 1.1191 Equiv.No HardenedSmall Headg6255 ～ 252 ～ 105 ～ 2516 ～ 238 ～ 22

-

1 9 Days 10D Cut[Stainless Steel] EN 1.4037 Equiv.45 ~ 50HRCSmall Headg685 ～ 150 ～ 25 ～ 104 ～ 63 ～ 5

-

1 9 Days 10D Cut[Stainless Steel] EN 1.4037 Equiv.45 ~ 50HRCSmall Headg6105 ～ 250 ～ 35 ～ 254 ～ 83 ～ 7

-

1 9 Days 10D Cut[Stainless Steel] EN 1.4037 Equiv.45 ~ 50HRCSmall Headg6125 ～ 250 ～ 45 ～ 256 ～ 103 ～ 9

-

1 9 Days 10D Cut[Stainless Steel] EN 1.4037 Equiv.45 ~ 50HRCSmall Headg6165 ～ 250 ～ 65 ～ 258 ～ 143 ～ 13

Loading...

  1. 1
  2. 2
  3. Next >>
 

Basic information

Type Slot Pin Shape Stepped Tip Type Straight
Shape of Stepped Section Diamond

Configure

Clear all

94Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.
The part number is completed.

Basic Attributes

  • Tip Shape

    • Circular Shape
    • D Cut

    Clear

  • Material

    • Steel
      • EN 1.1191 Equiv.
    • Stainless Steel
      • EN 1.4037 Equiv.
      • EN 1.4301 Equiv.

    Clear

  • Hardness

    • 45HRC ~
    • 45 ~ 50HRC
    • No Hardened

    Clear

  • Large Head/Small Head

    • Large Head
    • Small Head

    Clear

  • Insertion Part S Dimension Tolerance

    • 0/-0.02
    • g6

    Clear

  • Outer Dia. D(Ø)

    • 8
    • 10
    • 12
    • 16
    • 20
    • 25

    Clear

  • B(mm)

     [5-25/1mm Unit(s)]

    Clear

  • F(mm)

     [0-14/0.1mm Unit(s)]

    Clear

  • L(mm)

     [5-25/1mm Unit(s)]

    Clear

  • P(mm)

     [4-30/0.01mm Unit(s)]

    Clear

  • S(mm)

     [3-29/0.01mm Unit(s)]

    Clear

  • Type

    • KJPDHK
    • KJPDK
    • KJPDKM
    • KJPDKS
    • KJPGDHK
    • KJPGDK
    • KJPGDKC
    • KJPGDKM
    • KJPGDKMH
    • KJPGDKMS
    • KJPGDKS

    Clear

  • Filter by CAD data type

    • 2D
    • 3D

    Clear

Filter by standard shipping days

    • All
    • 9 Days or Less

    Reset

Optional Attributes

Complementary Products

Tech Support

Technical Support
Tel：+49 69 668173-0 / FAX：+49 69 668173-360
Technical Inquiry

Payment Method

  • Payment on account
  • Pre Payment
  • PayPal

On-Demand Manufacturing

Change View

Certificates

  • ISO-9001
  • ISO-14001
  • AEO Certification
  • RoHS
  • REACH

MISUMI worldwide

Social Media

Legal notice

Copyright © MISUMI Corporation All Rights Reserved.