• Brands
  • Company
  • Contact
EN / UK
Type Code Seach | *NOT READY*
#CODE
Keyword suggestions
Part number suggestions
Discontinued Products

Slot Pins for Inspection Jigs / Oval Straight Type

Slot Pins for Inspection Jigs / Oval Straight Type

MISUMI

MISUMI

[Features] Elliptical straight/stepped insertion pin for test gauges.

Data sheet

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

(1) Straight
Small Head: D = 8 to 25

(2) Stepped
Small Head: D = 8 to 25

Large Head: D = 10 L to 20 L" ! "3 Large Head: D = 10 L to 20 L" ! "3

[ ! ]2

[ ! ]2

[ ! ]2

[ ! ]2


[ ! ] 1. EN 1.4125 Equiv. or 13Cr stainless steel has an identification groove on D part.
[ ! ] 2. For shorter handle length, specify the alteration ZC.
[ ! ] 3. Dimensions not specified are the same as those of Small Head Type.
[!] Centering hole may remain on tip depending on the diameter and the length.
[ ! ] Depending on diameter, the hardness of EN 1.1191 Equiv. (hardened) material may be less than 45 HRC.
[ ! ] Only EN 1.1191 Equiv. is available for Large Head Type (D10 L to 20 L).
[!] This product is hardened for the entire part.
 
[M] Material[H] Hardness(1) Straight(2) Stepped Straight
TYPETYPE
P 0
−0.02		S 0
−0.02/F 0
−0.05		Sg6/F 0
−0.03
EN 1.1191 Equiv.—KJPSCKJPDCKJPGDC
EN 1.1191 Equiv.45HRC or moreKJPSHCKJPDHCKJPGDHC
EN 1.4301 Equiv.—KJPSCSKJPDCS—
[ ! ] 1 EN 1.4125 Equiv. or
13Cr stainless steel		45 to 50HRCKJPSCC—KJPGDCC

Specification Table

Part Number (TYPE·D)—P—W—S—F—L—B
KJPDC16—P10.97—W8.47—S6.00—F2.0—L5—B10
Sg6
3.00−0.002
−0.008
3.01 to 6.00−0.004
−0.012
6.01 to 10.00−0.005
−0.014
10.01 to 18.00−0.006
−0.017
18.01 to 29.00−0.007
−0.020
Part Number0.01 mm Increments0.1 mm Increments1 mm IncrementsM
(Coarse)
(1) Straight(2) Stepped StraightDPWS
(2) Stepped type only		F (F ≤ S/2)
(2) Stepped type only		LB
(2) Stepped type only
(P 0
−0.02)		(S 0
−0.02/F 0
−0.05)		(Sg6/F 0
−0.03)
(EN 1.1191 Equiv.)
KJPSC

(EN 1.1191 Equiv. (hardened))
KJPSHC

(EN 1.4301 Equiv.)
KJPSCS

(EN 1.4125 Equiv. or
13Cr Stainless Steel)
KJPSCC		(EN 1.1191 Equiv.)
KJPDC

(EN 1.1191 Equiv. (hardened))
KJPDHC

(EN 1.4301 Equiv.)
KJPDCS		(EN 1.1191 Equiv.)
KJPGDC

(EN 1.1191 Equiv. (hardened))
KJPGDHC

(EN 1.4125 Equiv. or
13Cr Stainless Steel)
KJPGDCC		 8 4.00 to 6.00P > W > S
(W ≥ 3.01)		 3.00 to 5.000.3 to 2.5Straight
5 to 30* 1


Stepped Straight
5 to 20		5 to 20M4
10 4.00 to 8.00 3.00 to 7.000.3 to 3.5M5
12 4.00 to 10.00 3.00 to 9.000.5 to 4.5M5
16 6.00 to 14.00 4.00 to 13.000.5 to 6.5M5
2010.00 to 18.00 6.00 to 17.001.0 to 8.5M5
2514.00 to 22.00 8.00 to 21.002.0 to 10.5M5
10 L10.00 to 16.00 5.00 to 15.001.0 to 7.5M5
12 L12.00 to 20.00 6.00 to 19.002.0 to 9.5M5
16 L16.00 to 25.00 8.00 to 24.002.0 to 12.0M5
20 L20.00 to 30.0010.00 to 29.002.0 to 14.5M5
[!] When the S dimension tolerance is g6, cut part on the tip cannot be made very thin. (S ≥ 5.00, F ≥ 1.0; F ≥ 1.5 when D = 20)
* 1. L = 21 to 30 is available only when the following conditions are all satisfied: Material: EN 1.1191 Equiv., Handle Dia. D ≥ 10, Pin Dia.: P ≥ 6, W ≥ 5

Alterations

Part Number—P—W—S—F—L—B—(CH·KH·ZC ... etc.)
KJPDC12
KJPSC20		—
—		P8.50
P10.00		—
—		W4.50
W5.00		—
 		S3.50
 		—
 		F1.2
 		—
—		L5
L10		—
 		B10
 		—
—		CH
ZC20
AlterationsCodeSpec.
Chain
Alterations
CHLoss-proof chain (length 600 mm) is attached to gauge body.
Handle Length
ZCChanges handle length 50 to 20, 30 or 40.
Ordering Code ZC20

[ ! ] Handle Dia. D ≥ 10, Pin Length (L or L + B) ≤ 20, Pin Dia.≥ 6, W or S ≥ 5, and S/2 + F ≥ 4.5
Applicable only when above conditions are all satisfied.

Engraving of P or W Dimension
KHMachines flats on knurled head and engraves P and W dims. (With the character orientation arbitrary).
AlterationsCodeSpec.
P, W Dimension Tolerance
PKCChanges P and W dimension tolerance to g6.
[ NG ] Combination with GN is not available
No Polish on Pin
GNNo polishing on pin part.
(Maintaining Roughness 1.6)
[ NG ] Combination with PKC is not available
[ NG ] Not applicable to Sg6 type

Part Number:  

    3D preview is not available, because the part number has not yet been determined.

  • In order to open the 3D preview, the part number must be fixed.
Loading...

Plug-in is required for 3D Preview

CAD Download

Data to be displayed
30
45
60
  1. 1
  2. 2
  3. Next >>
Part Number
KJPDC8-P[4-6/0.01]-W[3.01-5.99/0.01]-S[3-5/0.01]-F[0.3-2.5/0.1]-L[5-20/1]-B[5-20/1]
KJPDC10-P[4-8/0.01]-W[3.01-7.99/0.01]-S[3-7/0.01]-F[0.3-3.5/0.1]-L[5-20/1]-B[5-20/1]
KJPDC10L-P[8-16/0.01]-W[3.01-15.99/0.01]-S[5-15/0.01]-F[1-7.5/0.1]-L[5-20/1]-B[5-20/1]
KJPDC12-P[4-10/0.01]-W[3.01-10/0.01]-S[3-9/0.01]-F[0.5-4.5/0.1]-L[5-20/1]-B[5-20/1]
KJPDC12L-P[10-20/0.01]-W[3.01-19.99/0.01]-S[6-19/0.01]-F[2-9.5/0.1]-L[5-20/1]-B[5-20/1]
KJPDC16-P[6-14/0.01]-W[3.01-14/0.01]-S[4-13/0.01]-F[0.5-6.5/0.1]-L[5-20/1]-B[5-20/1]
KJPDC16L-P[16-25/0.01]-W[3.01-24.99/0.01]-S[8-24/0.01]-F[2-12/0.1]-L[5-20/1]-B[5-20/1]
KJPDC20-P[10-18/0.01]-W[3.01-18/0.01]-S[6-17/0.01]-F[1-8.5/0.1]-L[5-20/1]-B[5-20/1]
KJPDC20L-P[20-30/0.01]-W[3.01-29.99/0.01]-S[10-29/0.01]-F[2-14.5/0.1]-L[5-20/1]-B[5-20/1]
KJPDC25-P[14-22/0.01]-W[3.01-22/0.01]-S[8-21/0.01]-F[2-10.5/0.1]-L[5-20/1]-B[5-20/1]
KJPDCS8-P[4-6/0.01]-W[3.01-5.99/0.01]-S[3-5/0.01]-F[0.3-2.5/0.1]-L[5-20/1]-B[5-20/1]
KJPDCS10-P[4-8/0.01]-W[3.01-7.99/0.01]-S[3-7/0.01]-F[0.3-3.5/0.1]-L[5-20/1]-B[5-20/1]
KJPDCS12-P[4-10/0.01]-W[3.01-9.99/0.01]-S[3-9/0.01]-F[0.5-4.5/0.1]-L[5-20/1]-B[5-20/1]
KJPDCS16-P[6-14/0.01]-W[3.01-13.99/0.01]-S[4-13/0.01]-F[0.5-6.5/0.1]-L[5-20/1]-B[5-20/1]
KJPDCS20-P[10-18/0.01]-W[3.01-17.99/0.01]-S[6-17/0.01]-F[1-8.5/0.1]-L[5-20/1]-B[5-20/1]
KJPDCS25-P[14-22/0.01]-W[3.01-21.99/0.01]-S[8-21/0.01]-F[2-10.5/0.1]-L[5-20/1]-B[5-20/1]
KJPDHC8-P[4-6/0.01]-W[3.01-5.99/0.01]-S[3-5/0.01]-F[0.3-2.5/0.1]-L[5-20/1]-B[5-20/1]
KJPDHC10-P[4-8/0.01]-W[3.01-8/0.01]-S[3-7/0.01]-F[0.3-3.5/0.1]-L[5-20/1]-B[5-20/1]
KJPDHC10L-P[8-16/0.01]-W[3.01-15.99/0.01]-S[5-15/0.01]-F[1-7.5/0.1]-L[5-20/1]-B[5-20/1]
KJPDHC12-P[4-10/0.01]-W[3.01-10/0.01]-S[3-9/0.01]-F[0.5-4.5/0.1]-L[5-20/1]-B[5-20/1]
KJPDHC12L-P[10-20/0.01]-W[3.01-19.99/0.01]-S[6-19/0.01]-F[2-9.5/0.1]-L[5-20/1]-B[5-20/1]
KJPDHC16-P[6-14/0.01]-W[3.01-14/0.01]-S[4-13/0.01]-F[0.5-6.5/0.1]-L[5-20/1]-B[5-20/1]
KJPDHC16L-P[16-25/0.01]-W[3.01-24.99/0.01]-S[8-24/0.01]-F[2-12/0.1]-L[5-20/1]-B[5-20/1]
KJPDHC20-P[10-18/0.01]-W[3.01-18/0.01]-S[6-17/0.01]-F[1-8.5/0.1]-L[5-20/1]-B[5-20/1]
KJPDHC20L-P[20-30/0.01]-W[3.01-29.99/0.01]-S[10-29/0.01]-F[2-14.5/0.1]-L[5-20/1]-B[5-20/1]
KJPDHC25-P[14-22/0.01]-W[3.01-22/0.01]-S[8-21/0.01]-F[2-10.5/0.1]-L[5-20/1]-B[5-20/1]
KJPGDC10-P[4-8/0.01]-W[5-7.99/0.01]-S[3-7/0.01]-F[0.3-3.5/0.1]-L[5-20/1]-B[5-20/1]
KJPGDC10L-P[10-16/0.01]-W[3.01-15.99/0.01]-S[5-15/0.01]-F[1-7/0.1]-L[5-20/1]-B[5-20/1]
KJPGDC12-P[4-10/0.01]-W[5-9.99/0.01]-S[3-9/0.01]-F[0.5-4.5/0.1]-L[5-20/1]-B[5-20/1]
KJPGDC12L-P[12-20/0.01]-W[3.01-19.99/0.01]-S[6-19/0.01]-F[2-9/0.1]-L[5-20/1]-B[5-20/1]
KJPGDC16-P[6-14/0.01]-W[5-14/0.01]-S[4-13/0.01]-F[0.5-6.5/0.1]-L[5-20/1]-B[5-20/1]
KJPGDC16L-P[16-25/0.01]-W[3.01-24.99/0.01]-S[8-24/0.01]-F[2-12/0.1]-L[5-20/1]-B[5-20/1]
KJPGDC20-P[10-18/0.01]-W[6-18/0.01]-S[6-17/0.01]-F[1-8.5/0.1]-L[5-20/1]-B[5-20/1]
KJPGDC20L-P[20-30/0.01]-W[3.01-29.99/0.01]-S[10-29/0.01]-F[2-14.5/0.1]-L[5-20/1]-B[5-20/1]
KJPGDC25-P[14-22/0.01]-W[8-22/0.01]-S[8-21/0.01]-F[2-10.5/0.1]-L[5-20/1]-B[5-20/1]
KJPGDCC10-P[4-8/0.01]-W[5-8/0.01]-S[5-7/0.01]-F[0.3-3.5/0.1]-L[5-20/1]-B[5-20/1]
KJPGDCC12-P[4-10/0.01]-W[5-10/0.01]-S[3-9/0.01]-F[0.5-4.5/0.1]-L[5-20/1]-B[5-20/1]
KJPGDCC16-P[6-14/0.01]-W[5-14/0.01]-S[4-13/0.01]-F[0.5-6.5/0.1]-L[5-20/1]-B[5-20/1]
KJPGDCC20-P[10-18/0.01]-W[6-18/0.01]-S[6-17/0.01]-F[1-8.5/0.1]-L[5-20/1]-B[5-20/1]
KJPGDCC25-P[14-22/0.01]-W[8-22/0.01]-S[8-21/0.01]-F[2-10.5/0.1]-L[5-20/1]-B[5-20/1]
KJPGDHC10-P[4-8/0.01]-W[3.01-8/0.01]-S[3-7/0.01]-F[0.3-3.5/0.1]-L[5-20/1]-B[5-20/1]
KJPGDHC10L-P[10-16/0.01]-W[3.01-15.99/0.01]-S[5-15/0.01]-F[1-7/0.1]-L[5-20/1]-B[5-20/1]
KJPGDHC12-P[4-10/0.01]-W[3.01-10/0.01]-S[3-9/0.01]-F[0.5-4.5/0.1]-L[5-20/1]-B[5-20/1]
KJPGDHC12L-P[12-20/0.01]-W[3.01-19.99/0.01]-S[6-19/0.01]-F[2-9/0.1]-L[5-20/1]-B[5-20/1]
KJPGDHC16-P[6-14/0.01]-W[5-14/0.01]-S[4-13/0.01]-F[0.5-6.5/0.1]-L[5-20/1]-B[5-20/1]
KJPGDHC16L-P[16-25/0.01]-W[3.01-24.99/0.01]-S[8-24/0.01]-F[2-12/0.1]-L[5-20/1]-B[5-20/1]
KJPGDHC20-P[10-18/0.01]-W[6-18/0.01]-S[6-17/0.01]-F[1-8.5/0.1]-L[5-20/1]-B[5-20/1]
KJPGDHC20L-P[20-30/0.01]-W[3.01-29.99/0.01]-S[10-29/0.01]-F[2-14.5/0.1]-L[5-20/1]-B[5-20/1]
KJPGDHC25-P[14-22/0.01]-W[8-22/0.01]-S[8-21/0.01]-F[2-10.5/0.1]-L[5-20/1]-B[5-20/1]
KJPSC8-P[4-6/0.01]-W[3.01-5.99/0.01]-L[5-20/1]
KJPSC10-P[4-8/0.01]-W[3.01-7.99/0.01]-L[5-30/1]
KJPSC10L-P[10-16/0.01]-W[3.01-15.99/0.01]-L[5-30/1]
KJPSC12-P[4-10/0.01]-W[3.01-9.99/0.01]-L[5-30/1]
KJPSC12L-P[12-20/0.01]-W[3.01-19.99/0.01]-L[5-30/1]
KJPSC16-P[6-14/0.01]-W[3.01-13.99/0.01]-L[5-30/1]
KJPSC16L-P[16-25/0.01]-W[3.01-24.99/0.01]-L[5-30/1]
KJPSC20-P[10-18/0.01]-W[3.01-17.99/0.01]-L[5-30/1]
KJPSC20L-P[20-30/0.01]-W[3.01-29.99/0.01]-L[5-30/1]
KJPSC25-P[14-22/0.01]-W[3.01-21.99/0.01]-L[5-30/1]
KJPSCC8-P[4-6/0.01]-W[3.01-5.99/0.01]-L[5-20/1]
Part Number
Standard Unit Price
Minimum order quantityVolume Discount
Standard
Shipping Days
?
RoHSShape Tip Shape Material Hardness Large Head/Small Head Stepped Insertion Part S Dimension Tolerance Outer Dia. D
(Ø) 		B
(mm) 		F
(mm) 		L
(mm) 		P
(mm) 		S
(mm) 		W
(mm)

-

1 7 Days 10SteppedD Cut[Steel] EN 1.1191 Equiv.No HardenedSmall HeadStepped0/-0.0285 ～ 200.3 ～ 2.55 ～ 204 ～ 63 ～ 53.01 ～ 5.99

-

1 7 Days 10SteppedD Cut[Steel] EN 1.1191 Equiv.No HardenedSmall HeadStepped0/-0.02105 ～ 200.3 ～ 3.55 ～ 204 ～ 83 ～ 73 ～ 7.99

-

1 7 Days 10SteppedD Cut[Steel] EN 1.1191 Equiv.No HardenedLarge HeadStepped0/-0.02105 ～ 201 ～ 7.55 ～ 208 ～ 165 ～ 153 ～ 15.99

-

1 7 Days 10SteppedD Cut[Steel] EN 1.1191 Equiv.No HardenedSmall HeadStepped0/-0.02125 ～ 200.5 ～ 4.55 ～ 204 ～ 103 ～ 93 ～ 10

-

1 7 Days 10SteppedD Cut[Steel] EN 1.1191 Equiv.No HardenedLarge HeadStepped0/-0.02125 ～ 202 ～ 9.55 ～ 2010 ～ 206 ～ 193 ～ 19.99

-

1 7 Days 10SteppedD Cut[Steel] EN 1.1191 Equiv.No HardenedSmall HeadStepped0/-0.02165 ～ 200.5 ～ 6.55 ～ 206 ～ 144 ～ 133 ～ 14

-

1 7 Days 10SteppedD Cut[Steel] EN 1.1191 Equiv.No HardenedLarge HeadStepped0/-0.02165 ～ 202 ～ 125 ～ 2016 ～ 258 ～ 243 ～ 24.99

-

1 7 Days 10SteppedD Cut[Steel] EN 1.1191 Equiv.No HardenedSmall HeadStepped0/-0.02205 ～ 201 ～ 8.55 ～ 2010 ～ 186 ～ 173 ～ 18

-

1 7 Days 10SteppedD Cut[Steel] EN 1.1191 Equiv.No HardenedLarge HeadStepped0/-0.02205 ～ 202 ～ 14.55 ～ 2020 ～ 3010 ～ 293 ～ 29.99

-

1 7 Days 10SteppedD Cut[Steel] EN 1.1191 Equiv.No HardenedSmall HeadStepped0/-0.02255 ～ 202 ～ 10.55 ～ 2014 ～ 228 ～ 213 ～ 22

-

1 7 Days 10SteppedD Cut[Stainless Steel] EN 1.4301 Equiv.No HardenedSmall HeadStepped0/-0.0285 ～ 200.3 ～ 2.55 ～ 204 ～ 63 ～ 53.01 ～ 5.99

-

1 7 Days 10SteppedD Cut[Stainless Steel] EN 1.4301 Equiv.No HardenedSmall HeadStepped0/-0.02105 ～ 200.3 ～ 3.55 ～ 204 ～ 83 ～ 73 ～ 7.99

-

1 7 Days 10SteppedD Cut[Stainless Steel] EN 1.4301 Equiv.No HardenedSmall HeadStepped0/-0.02125 ～ 200.5 ～ 4.55 ～ 204 ～ 103 ～ 93 ～ 9.99

-

1 7 Days 10SteppedD Cut[Stainless Steel] EN 1.4301 Equiv.No HardenedSmall HeadStepped0/-0.02165 ～ 200.5 ～ 6.55 ～ 206 ～ 144 ～ 133 ～ 13.99

-

1 7 Days 10SteppedD Cut[Stainless Steel] EN 1.4301 Equiv.No HardenedSmall HeadStepped0/-0.02205 ～ 201 ～ 8.55 ～ 2010 ～ 186 ～ 173 ～ 17.99

-

1 7 Days 10SteppedD Cut[Stainless Steel] EN 1.4301 Equiv.No HardenedSmall HeadStepped0/-0.02255 ～ 202 ～ 10.55 ～ 2014 ～ 228 ～ 213 ～ 21.99

-

1 7 Days 10SteppedD Cut[Steel] EN 1.1191 Equiv.45HRC ~Small HeadStepped0/-0.0285 ～ 200.3 ～ 2.55 ～ 204 ～ 63 ～ 53.01 ～ 5.99

-

1 7 Days 10SteppedD Cut[Steel] EN 1.1191 Equiv.45HRC ~Small HeadStepped0/-0.02105 ～ 200.3 ～ 3.55 ～ 204 ～ 83 ～ 73 ～ 8

-

1 7 Days 10SteppedD Cut[Steel] EN 1.1191 Equiv.45HRC ~Large HeadStepped0/-0.02105 ～ 201 ～ 7.55 ～ 208 ～ 165 ～ 153 ～ 15.99

-

1 7 Days 10SteppedD Cut[Steel] EN 1.1191 Equiv.45HRC ~Small HeadStepped0/-0.02125 ～ 200.5 ～ 4.55 ～ 204 ～ 103 ～ 93 ～ 10

-

1 7 Days 10SteppedD Cut[Steel] EN 1.1191 Equiv.45HRC ~Large HeadStepped0/-0.02125 ～ 202 ～ 9.55 ～ 2010 ～ 206 ～ 193 ～ 19.99

-

1 7 Days 10SteppedD Cut[Steel] EN 1.1191 Equiv.45HRC ~Small HeadStepped0/-0.02165 ～ 200.5 ～ 6.55 ～ 206 ～ 144 ～ 133 ～ 14

-

1 7 Days 10SteppedD Cut[Steel] EN 1.1191 Equiv.45HRC ~Large HeadStepped0/-0.02165 ～ 202 ～ 125 ～ 2016 ～ 258 ～ 243 ～ 24.99

-

1 7 Days 10SteppedD Cut[Steel] EN 1.1191 Equiv.45HRC ~Small HeadStepped0/-0.02205 ～ 201 ～ 8.55 ～ 2010 ～ 186 ～ 173 ～ 18

-

1 7 Days 10SteppedD Cut[Steel] EN 1.1191 Equiv.45HRC ~Large HeadStepped0/-0.02205 ～ 202 ～ 14.55 ～ 2020 ～ 3010 ～ 293 ～ 29.99

-

1 7 Days 10SteppedD Cut[Steel] EN 1.1191 Equiv.45HRC ~Small HeadStepped0/-0.02255 ～ 202 ～ 10.55 ～ 2014 ～ 228 ～ 213 ～ 22

-

1 7 Days 10SteppedD Cut[Steel] EN 1.1191 Equiv.No HardenedSmall HeadSteppedg6105 ～ 200.3 ～ 3.55 ～ 204 ～ 83 ～ 75 ～ 7.99

-

1 7 Days 10SteppedD Cut[Steel] EN 1.1191 Equiv.No HardenedLarge HeadSteppedg6105 ～ 201 ～ 75 ～ 2010 ～ 165 ～ 153 ～ 15.99

-

1 7 Days 10SteppedD Cut[Steel] EN 1.1191 Equiv.No HardenedSmall HeadSteppedg6125 ～ 200.5 ～ 4.55 ～ 204 ～ 103 ～ 95 ～ 9.99

-

1 7 Days 10SteppedD Cut[Steel] EN 1.1191 Equiv.No HardenedLarge HeadSteppedg6125 ～ 202 ～ 95 ～ 2012 ～ 206 ～ 193 ～ 19.99

-

1 7 Days 10SteppedD Cut[Steel] EN 1.1191 Equiv.No HardenedSmall HeadSteppedg6165 ～ 200.5 ～ 6.55 ～ 206 ～ 144 ～ 135 ～ 14

-

1 7 Days 10SteppedD Cut[Steel] EN 1.1191 Equiv.No HardenedLarge HeadSteppedg6165 ～ 202 ～ 125 ～ 2016 ～ 258 ～ 243 ～ 24.99

-

1 7 Days 10SteppedD Cut[Steel] EN 1.1191 Equiv.No HardenedSmall HeadSteppedg6205 ～ 201 ～ 8.55 ～ 2010 ～ 186 ～ 176 ～ 18

-

1 7 Days 10SteppedD Cut[Steel] EN 1.1191 Equiv.No HardenedLarge HeadSteppedg6205 ～ 202 ～ 14.55 ～ 2020 ～ 3010 ～ 293 ～ 29.99

-

1 7 Days 10SteppedD Cut[Steel] EN 1.1191 Equiv.No HardenedSmall HeadSteppedg6255 ～ 202 ～ 10.55 ～ 2014 ～ 228 ～ 218 ～ 22

-

1 7 Days 10SteppedD Cut[Stainless Steel] EN 1.4037 Equiv.45 ~ 50HRCSmall HeadSteppedg6105 ～ 200.3 ～ 3.55 ～ 204 ～ 85 ～ 75 ～ 8

-

1 7 Days 10SteppedD Cut[Stainless Steel] EN 1.4037 Equiv.45 ~ 50HRCSmall HeadSteppedg6125 ～ 200.5 ～ 4.55 ～ 204 ～ 103 ～ 95 ～ 10

-

1 7 Days 10SteppedD Cut[Stainless Steel] EN 1.4037 Equiv.45 ~ 50HRCSmall HeadSteppedg6165 ～ 200.5 ～ 6.55 ～ 206 ～ 144 ～ 135 ～ 14

-

1 7 Days 10SteppedD Cut[Stainless Steel] EN 1.4037 Equiv.45 ~ 50HRCSmall HeadSteppedg6205 ～ 201 ～ 8.55 ～ 2010 ～ 186 ～ 176 ～ 18

-

1 7 Days 10SteppedD Cut[Stainless Steel] EN 1.4037 Equiv.45 ~ 50HRCSmall HeadSteppedg6255 ～ 202 ～ 10.55 ～ 2014 ～ 228 ～ 218 ～ 22

-

1 7 Days 10SteppedD Cut[Steel] EN 1.1191 Equiv.45HRC ~Small HeadSteppedg6105 ～ 200.3 ～ 3.55 ～ 204 ～ 83 ～ 73 ～ 8

-

1 7 Days 10SteppedD Cut[Steel] EN 1.1191 Equiv.45HRC ~Large HeadSteppedg6105 ～ 201 ～ 75 ～ 2010 ～ 165 ～ 153 ～ 15.99

-

1 7 Days 10SteppedD Cut[Steel] EN 1.1191 Equiv.45HRC ~Small HeadSteppedg6125 ～ 200.5 ～ 4.55 ～ 204 ～ 103 ～ 93 ～ 10

-

1 7 Days 10SteppedD Cut[Steel] EN 1.1191 Equiv.45HRC ~Large HeadSteppedg6125 ～ 202 ～ 95 ～ 2012 ～ 206 ～ 193 ～ 19.99

-

1 7 Days 10SteppedD Cut[Steel] EN 1.1191 Equiv.45HRC ~Small HeadSteppedg6165 ～ 200.5 ～ 6.55 ～ 206 ～ 144 ～ 135 ～ 14

-

1 7 Days 10SteppedD Cut[Steel] EN 1.1191 Equiv.45HRC ~Large HeadSteppedg6165 ～ 202 ～ 125 ～ 2016 ～ 258 ～ 243 ～ 24.99

-

1 7 Days 10SteppedD Cut[Steel] EN 1.1191 Equiv.45HRC ~Small HeadSteppedg6205 ～ 201 ～ 8.55 ～ 2010 ～ 186 ～ 176 ～ 18

-

1 7 Days 10SteppedD Cut[Steel] EN 1.1191 Equiv.45HRC ~Large HeadSteppedg6205 ～ 202 ～ 14.55 ～ 2020 ～ 3010 ～ 293 ～ 29.99

-

1 7 Days 10SteppedD Cut[Steel] EN 1.1191 Equiv.45HRC ~Small HeadSteppedg6255 ～ 202 ～ 10.55 ～ 2014 ～ 228 ～ 218 ～ 22

-

1 7 Days 10StraightOval[Steel] EN 1.1191 Equiv.No HardenedSmall HeadStandard-8--5 ～ 204 ～ 6-3 ～ 5.99

-

1 7 Days 10StraightOval[Steel] EN 1.1191 Equiv.No HardenedSmall HeadStandard-10--5 ～ 304 ～ 8-3 ～ 7.99

-

1 7 Days 10StraightOval[Steel] EN 1.1191 Equiv.No HardenedLarge HeadStandard-10--5 ～ 3010 ～ 16-3 ～ 15.99

-

1 7 Days 10StraightOval[Steel] EN 1.1191 Equiv.No HardenedSmall HeadStandard-12--5 ～ 304 ～ 10-3 ～ 9.99

-

1 7 Days 10StraightOval[Steel] EN 1.1191 Equiv.No HardenedLarge HeadStandard-12--5 ～ 3012 ～ 20-3 ～ 19.99

-

1 7 Days 10StraightOval[Steel] EN 1.1191 Equiv.No HardenedSmall HeadStandard-16--5 ～ 306 ～ 14-3 ～ 13.99

-

1 7 Days 10StraightOval[Steel] EN 1.1191 Equiv.No HardenedLarge HeadStandard-16--5 ～ 3016 ～ 25-3 ～ 24.99

-

1 7 Days 10StraightOval[Steel] EN 1.1191 Equiv.No HardenedSmall HeadStandard-20--5 ～ 3010 ～ 18-3 ～ 17.99

-

1 7 Days 10StraightOval[Steel] EN 1.1191 Equiv.No HardenedLarge HeadStandard-20--5 ～ 3020 ～ 30-3 ～ 29.99

-

1 7 Days 10StraightOval[Steel] EN 1.1191 Equiv.No HardenedSmall HeadStandard-25--5 ～ 3014 ～ 22-3 ～ 21.99

-

1 7 Days 10StraightOval[Stainless Steel] EN 1.4037 Equiv.45 ~ 50HRCSmall HeadStandard-8--5 ～ 204 ～ 6-3 ～ 5.99

Loading...

  1. 1
  2. 2
  3. Next >>
 

Basic information

Type Slot Pin Tip Type Straight Shape of Stepped Section Oval

Configure

Clear all

81Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.
The part number is completed.

Basic Attributes

  • Shape

    • Straight
    • Stepped

    Clear

  • Tip Shape

    • D Cut
    • Oval

    Clear

  • Material

    • Steel
      • EN 1.1191 Equiv.
    • Stainless Steel
      • EN 1.4037 Equiv.
      • EN 1.4301 Equiv.

    Clear

  • Hardness

    • 45HRC ~
    • 45 ~ 50HRC
    • No Hardened

    Clear

  • Large Head/Small Head

    • Large Head
    • Small Head

    Clear

  • Stepped

    • Standard
    • Stepped

    Clear

  • Insertion Part S Dimension Tolerance

    • 0/-0.02
    • g6

    Clear

  • Outer Dia. D(Ø)

    • 8
    • 10
    • 12
    • 16
    • 20
    • 25

    Clear

  • B(mm)

     [5-20/1mm Unit(s)]

    Clear

  • F(mm)

     [0.3-14.5/0.1mm Unit(s)]

    Clear

  • L(mm)

     [5-30/1mm Unit(s)]

    Clear

  • P(mm)

     [4-30/0.01mm Unit(s)]

    Clear

  • S(mm)

     [3-29/0.01mm Unit(s)]

    Clear

  • W(mm)

     [3.01-29.99/0.01mm Unit(s)]

    Clear

  • Type

    • KJPDC
    • KJPDCS
    • KJPDHC
    • KJPGDC
    • KJPGDCC
    • KJPGDHC
    • KJPSC
    • KJPSCC
    • KJPSCS
    • KJPSHC

    Clear

  • Filter by CAD data type

    • 2D
    • 3D

    Clear

Filter by standard shipping days

    • All
    • 7 Days or Less

    Reset

Optional Attributes

Complementary Products

Tech Support

Technical Support
Tel：+49 69 668173-0 / FAX：+49 69 668173-360
Technical Inquiry

Payment Method

  • Payment on account
  • Pre Payment
  • PayPal

On-Demand Manufacturing

Change View

Certificates

  • ISO-9001
  • ISO-14001
  • AEO Certification
  • RoHS
  • REACH

MISUMI worldwide

Social Media

Legal notice

Copyright © MISUMI Corporation All Rights Reserved.