• Brands
  • Company
  • Contact
EN / UK
Type Code Seach | *NOT READY*
#CODE
Keyword suggestions
Part number suggestions
Discontinued Products

Slot Pins for Inspection Jigs / Stepped Long Type

Slot Pins for Inspection Jigs / Stepped Long Type

MISUMI

MISUMI

[Features] Pin that can be used to measure workpieces with depth.

Data sheet

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

[ ! ]2

[ ! ]1

[ ! ]1

Slot Pins for Inspection Components - Straight Long With Step (2 Steps, 3 Steps): Related Image
[ ! ] 1. You can reduce the number of steps by setting D and H to 0.
[ ! ] 2. When H = 0, the angle Q is the same as C1.
[!] Handles and pins may be joined with an adhesive. Note that heat or strong force may cause separation.
[ ! ] When 50 < W1 + D + H, the handle is not hardened.
[!] The joint of each step may have a relief groove (approx. 1 mm wide and approx. 0.2 mm deep).
[!] Unless otherwise specified, the dimension tolerance conforms to JIS B 0405 Class m. However, chamfer tolerance and tapped depth are excluded.
[M] Material[H] HardnessTYPE
P,Q,S 0
−0.02		P, Q, Sg6
EN 1.1191 Equiv.—KJPLDSKJPGLDS
EN 1.1191 Equiv.45HRC or moreKJPLDSHKJPGLDSH

Specification Table

Part Number (TYPE·D)—P—L—Z
KJPLS20—P15—L120—Z50
 
 Part Number (TYPE, d)—W—D—H—P—Q—S—Z

(When reducing the number of steps)		KJPLDS20
KJPLDSH25		—
—		W25
W100		—
—		D50
D0		—
—		H15
H10		—
—		P15
P20		—
—		Q13
Q0		—
—		S6
S8		—
—		Z50
Z30
Sg6
3.00−0.002
−0.008
3.01 to 6.00−0.004
−0.012
6.01 to 10.00−0.005
−0.014
10.01 to 18.00−0.006
−0.017
18.01 to 21.00−0.007
−0.020
Part Number1 mm Increments0.01 mm Increments
(P ≥ Q ≥ S)		Z
Selection
TYPEd
P,Q,S 0
−0.02		P, Q, Sg6W,DHP,QS
(EN 1.1191 Equiv.)
KJPLDS

(EN 1.1191 Equiv. (hardened))
KJPLDSH		(EN 1.1191 Equiv.)
KJPGLDS

(EN 1.1191 Equiv. (hardened))
KJPGLDSH		120
3 to 100

(W ≤ P × 5)
(D ≤ Q × 4)		0
3 to 25

(H ≤ S × 3)		4.00 to 10.003.00 to 9.0030
40
50
166.00 to 14.004.00 to 13.00
2010.00 to 18.006.00 to 17.00
25(W+D+H ≤ 150)15.00 to 23.008.00 to 21.00

Alterations

Part Number—P—L—Z— (CH·KH, etc.)
KJPLS20—P15—L100—Z50− CH
Part Number—W—D—H—P—Q—S—Z— (CH·KH, etc.)
KJPLDS20—W25—D50—H18—P15—Q13—S6—Z50− CH
AlterationsCodeSpec.

Engraving of S Dimension

Slot Pins for Inspection Components - Straight Long With Step (2 Steps, 3 Steps): Related Image		KHSMachines flats on knurled head and engraves S dimension.
[ ! ] Applicable to Stepped Straight Long Type only
[ ! ] Engraved on the reverse side when KH and KHQ are combined

Engraving of P Dimension

Slot Pins for Inspection Components - Straight Long With Step (2 Steps, 3 Steps): Related Image		KHMachines flats on knurled head and engraves P dimension (with the character orientation arbitrary).
[ ! ] Engraved on the reverse side when combined with KHQ and KHS.
AlterationsCodeSpec.

Engraving of Q Dimension

Slot Pins for Inspection Components - Straight Long With Step (2 Steps, 3 Steps): Related Image		KHQMachines flats on knurled head and engraves Q dimension.
[ ! ] Applicable to Stepped Straight Long Type only
[ ! ] Engraved on the reverse side when KH and KHS are combined

Chain

Slot Pins for Inspection Components - Straight Long With Step (2 Steps, 3 Steps): Related Image		CHLoss-proof chain (length 600 mm) is attached to gauge body.
Additional Surface Treatment
(Black Oxide)		STCAdds black oxide surface treatment.

Caution when making alterations to engravings (KHS, KH, KHQ)

Slot Pins for Inspection Components - Straight Long With Step (2 Steps, 3 Steps): Related Image

[ ! ]If the pin and the knurled part are joined with an adhesive,
10 mm of the tip is not machined flat because the tip is thin.

Part Number:  

    3D preview is not available, because the part number has not yet been determined.

  • In order to open the 3D preview, the part number must be fixed.
Loading...

Plug-in is required for 3D Preview

CAD Download

Data to be displayed
30
45
60
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. Next >>
Part Number
KJPGLDS12-W0-D0-H0-P0-Q0-S0-Z[30,​40,​50]
KJPGLDS12-W0-D0-H0-P0-Q0-S[3-9/0.01]-Z[30,​40,​50]
KJPGLDS12-W0-D0-H0-P0-Q[4-10/0.01]-S0-Z[30,​40,​50]
KJPGLDS12-W0-D0-H0-P0-Q[4-10/0.01]-S[3-9/0.01]-Z[30,​40,​50]
KJPGLDS12-W0-D0-H0-P[4-10/0.01]-Q0-S0-Z[30,​40,​50]
KJPGLDS12-W0-D0-H0-P[4-10/0.01]-Q0-S[3-9/0.01]-Z[30,​40,​50]
KJPGLDS12-W0-D0-H0-P[4-10/0.01]-Q[4-10/0.01]-S0-Z[30,​40,​50]
KJPGLDS12-W0-D0-H0-P[4-10/0.01]-Q[4-10/0.01]-S[3-9/0.01]-Z[30,​40,​50]
KJPGLDS12-W0-D0-H[3-25/1]-P0-Q0-S0-Z[30,​40,​50]
KJPGLDS12-W0-D0-H[3-25/1]-P0-Q0-S[3-9/0.01]-Z[30,​40,​50]
KJPGLDS12-W0-D0-H[3-25/1]-P0-Q[4-10/0.01]-S0-Z[30,​40,​50]
KJPGLDS12-W0-D0-H[3-25/1]-P0-Q[4-10/0.01]-S[3-9/0.01]-Z[30,​40,​50]
KJPGLDS12-W0-D0-H[3-25/1]-P[4-10/0.01]-Q0-S0-Z[30,​40,​50]
KJPGLDS12-W0-D0-H[3-25/1]-P[4-10/0.01]-Q0-S[3-9/0.01]-Z[30,​40,​50]
KJPGLDS12-W0-D0-H[3-25/1]-P[4-10/0.01]-Q[4-10/0.01]-S0-Z[30,​40,​50]
KJPGLDS12-W0-D0-H[3-25/1]-P[4-10/0.01]-Q[4-10/0.01]-S[3-9/0.01]-Z[30,​40,​50]
KJPGLDS12-W0-D[3-100/1]-H0-P0-Q0-S0-Z[30,​40,​50]
KJPGLDS12-W0-D[3-100/1]-H0-P0-Q0-S[3-9/0.01]-Z[30,​40,​50]
KJPGLDS12-W0-D[3-100/1]-H0-P0-Q[4-10/0.01]-S0-Z[30,​40,​50]
KJPGLDS12-W0-D[3-100/1]-H0-P0-Q[4-10/0.01]-S[3-9/0.01]-Z[30,​40,​50]
KJPGLDS12-W0-D[3-100/1]-H0-P[4-10/0.01]-Q0-S0-Z[30,​40,​50]
KJPGLDS12-W0-D[3-100/1]-H0-P[4-10/0.01]-Q0-S[3-9/0.01]-Z[30,​40,​50]
KJPGLDS12-W0-D[3-100/1]-H0-P[4-10/0.01]-Q[4-10/0.01]-S0-Z[30,​40,​50]
KJPGLDS12-W0-D[3-100/1]-H0-P[4-10/0.01]-Q[4-10/0.01]-S[3-9/0.01]-Z[30,​40,​50]
KJPGLDS12-W0-D[3-100/1]-H[3-25/1]-P0-Q0-S0-Z[30,​40,​50]
KJPGLDS12-W0-D[3-100/1]-H[3-25/1]-P0-Q0-S[3-9/0.01]-Z[30,​40,​50]
KJPGLDS12-W0-D[3-100/1]-H[3-25/1]-P0-Q[4-10/0.01]-S0-Z[30,​40,​50]
KJPGLDS12-W0-D[3-100/1]-H[3-25/1]-P0-Q[4-10/0.01]-S[3-9/0.01]-Z[30,​40,​50]
KJPGLDS12-W0-D[3-100/1]-H[3-25/1]-P[4-10/0.01]-Q0-S0-Z[30,​40,​50]
KJPGLDS12-W0-D[3-100/1]-H[3-25/1]-P[4-10/0.01]-Q0-S[3-9/0.01]-Z[30,​40,​50]
KJPGLDS12-W0-D[3-100/1]-H[3-25/1]-P[4-10/0.01]-Q[4-10/0.01]-S0-Z[30,​40,​50]
KJPGLDS12-W0-D[3-100/1]-H[3-25/1]-P[4-10/0.01]-Q[4-10/0.01]-S[3-9/0.01]-Z[30,​40,​50]
KJPGLDS12-W[3-100/1]-D0-H0-P0-Q0-S0-Z[30,​40,​50]
KJPGLDS12-W[3-100/1]-D0-H0-P0-Q0-S[3-9/0.01]-Z[30,​40,​50]
KJPGLDS12-W[3-100/1]-D0-H0-P0-Q[4-10/0.01]-S0-Z[30,​40,​50]
KJPGLDS12-W[3-100/1]-D0-H0-P0-Q[4-10/0.01]-S[3-9/0.01]-Z[30,​40,​50]
KJPGLDS12-W[3-100/1]-D0-H0-P[4-10/0.01]-Q0-S0-Z[30,​40,​50]
KJPGLDS12-W[3-100/1]-D0-H0-P[4-10/0.01]-Q0-S[3-9/0.01]-Z[30,​40,​50]
KJPGLDS12-W[3-100/1]-D0-H0-P[4-10/0.01]-Q[4-10/0.01]-S0-Z[30,​40,​50]
KJPGLDS12-W[3-100/1]-D0-H0-P[4-10/0.01]-Q[4-10/0.01]-S[3-9/0.01]-Z[30,​40,​50]
KJPGLDS12-W[3-100/1]-D0-H[3-25/1]-P0-Q0-S0-Z[30,​40,​50]
KJPGLDS12-W[3-100/1]-D0-H[3-25/1]-P0-Q0-S[3-9/0.01]-Z[30,​40,​50]
KJPGLDS12-W[3-100/1]-D0-H[3-25/1]-P0-Q[4-10/0.01]-S0-Z[30,​40,​50]
KJPGLDS12-W[3-100/1]-D0-H[3-25/1]-P0-Q[4-10/0.01]-S[3-9/0.01]-Z[30,​40,​50]
KJPGLDS12-W[3-100/1]-D0-H[3-25/1]-P[4-10/0.01]-Q0-S0-Z[30,​40,​50]
KJPGLDS12-W[3-100/1]-D0-H[3-25/1]-P[4-10/0.01]-Q0-S[3-9/0.01]-Z[30,​40,​50]
KJPGLDS12-W[3-100/1]-D0-H[3-25/1]-P[4-10/0.01]-Q[4-10/0.01]-S0-Z[30,​40,​50]
KJPGLDS12-W[3-100/1]-D0-H[3-25/1]-P[4-10/0.01]-Q[4-10/0.01]-S[3-9/0.01]-Z[30,​40,​50]
KJPGLDS12-W[3-100/1]-D[3-100/1]-H0-P0-Q0-S0-Z[30,​40,​50]
KJPGLDS12-W[3-100/1]-D[3-100/1]-H0-P0-Q0-S[3-9/0.01]-Z[30,​40,​50]
KJPGLDS12-W[3-100/1]-D[3-100/1]-H0-P0-Q[4-10/0.01]-S0-Z[30,​40,​50]
KJPGLDS12-W[3-100/1]-D[3-100/1]-H0-P0-Q[4-10/0.01]-S[3-9/0.01]-Z[30,​40,​50]
KJPGLDS12-W[3-100/1]-D[3-100/1]-H0-P[4-10/0.01]-Q0-S0-Z[30,​40,​50]
KJPGLDS12-W[3-100/1]-D[3-100/1]-H0-P[4-10/0.01]-Q0-S[3-9/0.01]-Z[30,​40,​50]
KJPGLDS12-W[3-100/1]-D[3-100/1]-H0-P[4-10/0.01]-Q[4-10/0.01]-S0-Z[30,​40,​50]
KJPGLDS12-W[3-100/1]-D[3-100/1]-H0-P[4-10/0.01]-Q[4-10/0.01]-S[3-9/0.01]-Z[30,​40,​50]
KJPGLDS12-W[3-100/1]-D[3-100/1]-H[3-25/1]-P0-Q0-S0-Z[30,​40,​50]
KJPGLDS12-W[3-100/1]-D[3-100/1]-H[3-25/1]-P0-Q0-S[3-9/0.01]-Z[30,​40,​50]
KJPGLDS12-W[3-100/1]-D[3-100/1]-H[3-25/1]-P0-Q[4-10/0.01]-S0-Z[30,​40,​50]
KJPGLDS12-W[3-100/1]-D[3-100/1]-H[3-25/1]-P0-Q[4-10/0.01]-S[3-9/0.01]-Z[30,​40,​50]
Part Number
Standard Unit Price
Minimum order quantityVolume Discount
Standard
Shipping Days
?
RoHSHardness Insertion Part P, Q, S Dimension Tolerance Outer Dia. D
(Ø) 		Handle Length Z
(mm) 		D
(mm) 		H
(mm) 		P
(mm) 		Q
(mm) 		S
(mm) 		W
(mm)

-

1 7 Days 10No Hardenedg61230 ～ 50000000

-

1 7 Days 10No Hardenedg61230 ～ 5000003 ～ 90

-

1 7 Days 10No Hardenedg61230 ～ 500004 ～ 1000

-

1 7 Days 10No Hardenedg61230 ～ 500004 ～ 103 ～ 90

-

1 7 Days 10No Hardenedg61230 ～ 50004 ～ 10000

-

1 7 Days 10No Hardenedg61230 ～ 50004 ～ 1003 ～ 90

-

1 7 Days 10No Hardenedg61230 ～ 50004 ～ 104 ～ 1000

-

1 7 Days 10No Hardenedg61230 ～ 50004 ～ 104 ～ 103 ～ 90

-

1 7 Days 10No Hardenedg61230 ～ 5003 ～ 250000

-

1 7 Days 10No Hardenedg61230 ～ 5003 ～ 25003 ～ 90

-

1 7 Days 10No Hardenedg61230 ～ 5003 ～ 2504 ～ 1000

-

1 7 Days 10No Hardenedg61230 ～ 5003 ～ 2504 ～ 103 ～ 90

-

1 7 Days 10No Hardenedg61230 ～ 5003 ～ 254 ～ 10000

-

1 7 Days 10No Hardenedg61230 ～ 5003 ～ 254 ～ 1003 ～ 90

-

1 7 Days 10No Hardenedg61230 ～ 5003 ～ 254 ～ 104 ～ 1000

-

1 7 Days 10No Hardenedg61230 ～ 5003 ～ 254 ～ 104 ～ 103 ～ 90

-

1 7 Days 10No Hardenedg61230 ～ 503 ～ 10000000

-

1 7 Days 10No Hardenedg61230 ～ 503 ～ 1000003 ～ 90

-

1 7 Days 10No Hardenedg61230 ～ 503 ～ 100004 ～ 1000

-

1 7 Days 10No Hardenedg61230 ～ 503 ～ 100004 ～ 103 ～ 90

-

1 7 Days 10No Hardenedg61230 ～ 503 ～ 10004 ～ 10000

-

1 7 Days 10No Hardenedg61230 ～ 503 ～ 10004 ～ 1003 ～ 90

-

1 7 Days 10No Hardenedg61230 ～ 503 ～ 10004 ～ 104 ～ 1000

-

1 7 Days 10No Hardenedg61230 ～ 503 ～ 10004 ～ 104 ～ 103 ～ 90

-

1 7 Days 10No Hardenedg61230 ～ 503 ～ 1003 ～ 250000

-

1 7 Days 10No Hardenedg61230 ～ 503 ～ 1003 ～ 25003 ～ 90

-

1 7 Days 10No Hardenedg61230 ～ 503 ～ 1003 ～ 2504 ～ 1000

-

1 7 Days 10No Hardenedg61230 ～ 503 ～ 1003 ～ 2504 ～ 103 ～ 90

-

1 7 Days 10No Hardenedg61230 ～ 503 ～ 1003 ～ 254 ～ 10000

-

1 7 Days 10No Hardenedg61230 ～ 503 ～ 1003 ～ 254 ～ 1003 ～ 90

-

1 7 Days 10No Hardenedg61230 ～ 503 ～ 1003 ～ 254 ～ 104 ～ 1000

-

1 7 Days 10No Hardenedg61230 ～ 503 ～ 1003 ～ 254 ～ 104 ～ 103 ～ 90

-

1 7 Days 10No Hardenedg61230 ～ 50000003 ～ 100

-

1 7 Days 10No Hardenedg61230 ～ 5000003 ～ 93 ～ 100

-

1 7 Days 10No Hardenedg61230 ～ 500004 ～ 1003 ～ 100

-

1 7 Days 10No Hardenedg61230 ～ 500004 ～ 103 ～ 93 ～ 100

-

1 7 Days 10No Hardenedg61230 ～ 50004 ～ 10003 ～ 100

-

1 7 Days 10No Hardenedg61230 ～ 50004 ～ 1003 ～ 93 ～ 100

-

1 7 Days 10No Hardenedg61230 ～ 50004 ～ 104 ～ 1003 ～ 100

-

1 7 Days 10No Hardenedg61230 ～ 50004 ～ 104 ～ 103 ～ 93 ～ 100

-

1 7 Days 10No Hardenedg61230 ～ 5003 ～ 250003 ～ 100

-

1 7 Days 10No Hardenedg61230 ～ 5003 ～ 25003 ～ 93 ～ 100

-

1 7 Days 10No Hardenedg61230 ～ 5003 ～ 2504 ～ 1003 ～ 100

-

1 7 Days 10No Hardenedg61230 ～ 5003 ～ 2504 ～ 103 ～ 93 ～ 100

-

1 7 Days 10No Hardenedg61230 ～ 5003 ～ 254 ～ 10003 ～ 100

-

1 7 Days 10No Hardenedg61230 ～ 5003 ～ 254 ～ 1003 ～ 93 ～ 100

-

1 7 Days 10No Hardenedg61230 ～ 5003 ～ 254 ～ 104 ～ 1003 ～ 100

-

1 7 Days 10No Hardenedg61230 ～ 5003 ～ 254 ～ 104 ～ 103 ～ 93 ～ 100

-

1 7 Days 10No Hardenedg61230 ～ 503 ～ 10000003 ～ 100

-

1 7 Days 10No Hardenedg61230 ～ 503 ～ 1000003 ～ 93 ～ 100

-

1 7 Days 10No Hardenedg61230 ～ 503 ～ 100004 ～ 1003 ～ 100

-

1 7 Days 10No Hardenedg61230 ～ 503 ～ 100004 ～ 103 ～ 93 ～ 100

-

1 7 Days 10No Hardenedg61230 ～ 503 ～ 10004 ～ 10003 ～ 100

-

1 7 Days 10No Hardenedg61230 ～ 503 ～ 10004 ～ 1003 ～ 93 ～ 100

-

1 7 Days 10No Hardenedg61230 ～ 503 ～ 10004 ～ 104 ～ 1003 ～ 100

-

1 7 Days 10No Hardenedg61230 ～ 503 ～ 10004 ～ 104 ～ 103 ～ 93 ～ 100

-

1 7 Days 10No Hardenedg61230 ～ 503 ～ 1003 ～ 250003 ～ 100

-

1 7 Days 10No Hardenedg61230 ～ 503 ～ 1003 ～ 25003 ～ 93 ～ 100

-

1 7 Days 10No Hardenedg61230 ～ 503 ～ 1003 ～ 2504 ～ 1003 ～ 100

-

1 7 Days 10No Hardenedg61230 ～ 503 ～ 1003 ～ 2504 ～ 103 ～ 93 ～ 100

Loading...

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. Next >>
 

Basic information

Type Slot Pin Shape Stepped Tip Shape Circular Shape
Tip Type Straight Shape of Stepped Section Circular Shape Material EN 1.1191 Equiv.

Configure

Clear all

1,024Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.
The part number is completed.

Basic Attributes

  • Hardness

    • 45HRC ~
    • No Hardened

    Clear

  • Insertion Part P, Q, S Dimension Tolerance

    • 0/-0.02
    • g6

    Clear

  • Outer Dia. D(Ø)

    • 12
    • 16
    • 20
    • 25

    Clear

  • Handle Length Z(mm)

    • 30
    • 40
    • 50

    Clear

  • D(mm)

    • 0

     [3-100/1mm Unit(s)]

    Clear

  • H(mm)

    • 0

     [3-25/1mm Unit(s)]

    Clear

  • P(mm)

    • 0

     [4-23/0.01mm Unit(s)]

    Clear

  • Q(mm)

    • 0

     [4-23/0.01mm Unit(s)]

    Clear

  • S(mm)

    • 0

     [3-21/0.01mm Unit(s)]

    Clear

  • W(mm)

    • 0

     [3-100/1mm Unit(s)]

    Clear

  • Type

    • KJPGLDS
    • KJPGLDSH
    • KJPLDS
    • KJPLDSH

    Clear

  • Filter by CAD data type

    • 2D
    • 3D

    Clear

Filter by standard shipping days

    • All
    • 7 Days or Less

    Reset

Optional Attributes

Complementary Products

Tech Support

Technical Support
Tel：+49 69 668173-0 / FAX：+49 69 668173-360
Technical Inquiry

Payment Method

  • Payment on account
  • Pre Payment
  • PayPal

On-Demand Manufacturing

Change View

Certificates

  • ISO-9001
  • ISO-14001
  • AEO Certification
  • RoHS
  • REACH

MISUMI worldwide

Social Media

Legal notice

Copyright © MISUMI Corporation All Rights Reserved.