• Brands
  • Company
  • Contact
EN / UK
Type Code Seach | *NOT READY*
#CODE
Keyword suggestions
Part number suggestions
Discontinued Products

Slot Pins for Inspection Jigs / Tapered Type

Slot Pins for Inspection Jigs / Tapered Type

MISUMI

MISUMI

[Features] Pin that can prevent thin products such as metal sheets from being pinched.

Data sheet

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

(1)(2)(3) Round tip type
Small Head: D = 8 to 25

(1) Taper Shape Fixed Type only [ ! ]3
Large Head: D = 10 L to 20 L

(4) Tapered, No Step:
D = 8 to 25

[ ! ]6

[ ! ]5

[ ! ]4

[ ! ]5

[ ! ]5

[ ! ]6

[ ! ]5

[ ! ]4

[ ! ]6

[ ! ]4

Slot Pins for Inspection Components - Tapered, Non-Stepped: Related Image
[ ! ] 1. For electroless nickel plating, please specify the alteration MN.
[ ! ] 2. EN 1.4125 Equiv. or 13Cr stainless steel has an identification groove on D part.
[ ! ] 3. Dimensions not specified are the same as those of Small Head Type.
[ ! ] 4. For shorter handle length, specify the alteration ZC.
[ ! ] 5. There is a relief groove that is approx. 1 mm wide (approx. 0.2 mm deep).
[ ! ] 6. P dimension section (tapered part) is not ground.
[ ! ] Large Head Type (D = 10 L to 20 L) is available for EN 1.1191 Equiv. only
[!] This product is hardened for the entire part.
[!] Unless otherwise specified, the dimension tolerance conforms to JIS B 0405 Class m. However, chamfer tolerances, tapped depth, and angular dimension tolerances are excluded.
[M]Material [!] 1[H] Hardness(1) Taper Shape Fixed(2) Angle Selection(3) X Dimension Configurable(4) Tapered, No Step
TYPETYPETYPETYPE
S 0
− 0.02		Sg6S 0
− 0.02		S 0
− 0.02
EN 1.1191 Equiv.—KJPDTKJPGDTKJPKTKJPXTKJPDTN
EN 1.1191 Equiv.45HRC or moreKJPDTHKJPGDTHKJPKTHKJPXTHKJPDTNH
EN 1.4301 Equiv.—KJPDTSKJPGDTSKJPKTSKJPXTS—
[ ! ] 2 EN 1.4125 Equiv. or
13Cr Stainless Steel		45 to 50HRCKJPDTCKJPGDTCKJPKTCKJPXTC—

Specification Table

Part Number (TYPE·D)—P—S—B—K—X
KJPDT8
KJPKTH20
KJPXTH20
KJPDTN16		—
—
—
—		P5.01
P16.00
P15.00
P8.00		—
—
—		S3.00
S8.00
S10		—
—
—
—		B10
B20
B13
B20
—
K10

—

X3
(1) Taper Shape Fixed
(2) Angle Selectable
(3) X Dimension Selectable
(4) Tapered, No Step:
Sg6
3.00−0.002
−0.008
3.01 or more 6.00−0.004−0.012
6.01 to 10.00−0.005−0.014
10.01 to 18.00−0.006−0.017
18.01 to 29.00−0.007−0.020
■ (1) Taper Shape Fixed
Part Number0.01 mm Increments1 mm IncrementsK°XY1·Y2M
(Coarse)
TYPEDPS (P−1 ≥ S)B
S0
−0.02		Sg6
(EN 1.1191 Equiv.)
KJPDT

(EN 1.1191 Equiv. (hardened))
KJPDTH

(EN 1.4301 Equiv.)
KJPDTS

(EN 1.4125 Equiv. or
13Cr Stainless Steel)
KJPDTC		(EN 1.1191 Equiv.)
KJPGDT

(EN 1.1191 Equiv. (hardened))
KJPGDTH

(EN 1.4301 Equiv.)
KJPGDTS

(EN 1.4125 Equiv. or
13Cr Stainless Steel)
KJPGDTC		 84.00 to 6.003.00 to 5.00(When S < 8)
5 to 25

(When S ≥ 8)
5 to 40


For EN 1.4301 Equiv.
B ≤ S × 5		Tapered
1/5		51M4
104.00 to 8.003.00 to 7.00M5
125.00 to 10.003.00 to 9.00
168.00 to 14.003.00 to 13.00
2010.00 to 18.005.00 to 17.00
2515.00 to 23.008.00 to 22.00
10 L10.00 to 16.005.00 to 15.00
12 L12.00 to 20.006.00 to 19.00
16 L16.00 to 25.008.00 to 24.00
20 L20.00 to 30.0010.00 to 29.00
■ (2) Angle selectable (X dimension is fixed) (3) X dimension selectable (Angle K° is fixed)
Part Number0.01 mm Increments1 mm IncrementsK°XY1·Y2ConditionM
(Coarse)
TYPEDPSBSelectionFixedSelectionFixed
S0
−0.02
(2) Angle Selection(3) X Dimension Selectable
(EN 1.1191 Equiv.)
KJPKT
(EN 1.1191 Equiv. (hardened))
KJPKTH
(EN 1.4301 Equiv.)
KJPKTS
(EN 1.4125 Equiv. or 13Cr Stainless Steel)
KJPKTC		(EN 1.1191 Equiv.)
KJPXT
(EN 1.1191 Equiv. (hardened))
KJPXTH
(EN 1.4301 Equiv.)
KJPXTS
(EN 1.4125 Equiv. or 13Cr Stainless Steel)
KJPXTC		10 4.21 or more
 7.59		3.00 or more
 5.98		5 to 25

For EN 1.4301 Equiv.
B ≤ S × 5		10
15		Tapered
1/5		1
2
3		5When K° = 10, 1.8
When K° = 15. 2.7
When X = 1, Y1 = 1.8 and Y2 = 0.2
When X = 2, Y1 = 1.6 and Y2 = 0.4
When X = 3, Y1 = 1.4 and Y2 = 0.6		When K° = 10, S < P - 2.8 and D > P + 2.8
When K° = 15, S < P - 3.7 and D > P + 3.7
When X = 1, S < P - 1.2 and D > P + 2.8
When X = 2, S < P - 1.4 and D > P + 2.6
When X = 3, S < P - 1.6 and D > P + 2.4		M5
12 5.00 or more
 9.59		3.00 or more
 7.98
16 8.00 to 13.594.00 to 11.98
2010.00 to 17.596.00 to 15.98
2515.00 to 22.598.00 to 20.98
■ (4) Tapered, No Step:
Part Number0.01 mm Increments1 mm IncrementsM
(Coarse)
TYPEDPB
Tapered, No Step
(EN 1.1191 Equiv.)
KJPDTN

(EN 1.1191 Equiv. (hardened))
KJPDTNH		84.00 to 6.00(When P−1 < 8)
5 to 25

(When P−1 ≥ 8)
5 to 40		M4
104.00 to 8.00M5
125.00 to 10.00
168.00 to 14.00
2010.00 to 18.00
2515.00 to 23.00

Alterations

Part Number—P—S—B—K—X— (CH· KH· ZC· NMN, etc.)
KJPDT16
KJPDTN10		—
—		P12.00
P8.00		—S10.00—
—		B15
B10		    − NMN
− ZC30 − KF− KJPDTN10
AlterationsCodeSpec.
Additional Surface Treatment
(Electroless Nickel Plating)		MNElectroless nickel plating is applied.
[ ! ] Applicable to Material EN 1.1191 Equiv. only
[ NG ] Combination with STC is not available.
Additional Surface Treatment
(Black Oxide)		STCAdds black oxide surface treatment.
[ ! ] Applicable to Material EN 1.1191 Equiv. only
[ NG ]Combination with MN is not available.

Engraving of the Specified Characters

Slot Pins for Inspection Components - Tapered, Non-Stepped: Related Image		KFEngraves alphabet or number.
Ordering Code KF−MISUMI0034
Printable Character: alphabet, number, . (period)
[ NG ] Not applicable to handle length 10

[ ! ] No symbols, such as a hyphen (-), other than those mentioned above may be used for engraving.

[ ! ] The pin's orientation toward the engraved characters is arbitrary.

[ ! ] Engraved on the reverse side when combined with KH.

[ ! ] Up to 8 digits max.

[ ! ] When combining with other options, enter this last.

Z (Handle)Max. Characters
Small HeadLarge Head
205—
30105
401210
50

Engraving of P Dimension

Slot Pins for Inspection Components - Tapered, Non-Stepped: Related Image		KHMachines flats on knurled head and engraves P dimension (with the character orientation arbitrary).
[ NG ] Not applicable to handle length 10
[ ! ] Engraved on the reverse side when combined with KF.
AlterationsCodeSpec.

Handle Length

Slot Pins for Inspection Components - Tapered, Non-Stepped: Related Image		ZCChanges handle length 50 to 10, 20, 30 or 40.

[ NG ] For handle length 10, there is no tapped hole.

[ ! ] Handle length 10 or 20 is available when P ≥ 5 and pin length (10 + B or L + 10) ≤ 30.

[ ! ] For Large Head Type, only ZC30 and 40 are applicable.
[ NG ] For handle length 10, combination with KH and KF is not available.

Chain

Slot Pins for Inspection Components - Tapered, Non-Stepped: Related Image		CHLoss-proof chain (length 600 mm) is attached to gauge body.
No Relief Groove
NMNOmits the relief groove between knurled part and straight part on the step.
[ NG ] Not applicable to Large Head Type

KF Alteration (Engraving of Specified Characters) Precautions

(1) Please enter the characters you want after "KF-".
(2) Printable characters are alphabets, numbers, and periods (.).
(3) Numbers can be up to 8 characters.
(4) When combining with other alterations, enter KF last.
(5) You cannot use more than 1 period (.).
[Example]
　OK: KJPGSH16-P9.34-L30-STT-KH-KF-246625.5020
　NG: KJPGSH16-P9.34-L30-STT-KH-KF-246625..5020
　NG: KJPGSH16-P9.34-L30-STT-KH-KF-246.625.5020

Part Number:  

    3D preview is not available, because the part number has not yet been determined.

  • In order to open the 3D preview, the part number must be fixed.
Loading...

Plug-in is required for 3D Preview

CAD Download

Data to be displayed
30
45
60
  1. 1
  2. 2
  3. Next >>
Part Number
KJPDT8-P[4-6/0.01]-S[3-5/0.01]-B[5-25/1]
KJPDT10-P[4-8/0.01]-S[3-7/0.01]-B[5-25/1]
KJPDT10L-P[10-16/0.01]-S[5-15/0.01]-B[5-40/1]
KJPDT12-P[5-10/0.01]-S[3-9/0.01]-B[5-40/1]
KJPDT12L-P[12-20/0.01]-S[6-19/0.01]-B[5-40/1]
KJPDT16-P[8-14/0.01]-S[3-13/0.01]-B[5-40/1]
KJPDT16L-P[16-25/0.01]-S[8-24/0.01]-B[5-40/1]
KJPDT20-P[10-18/0.01]-S[5-17/0.01]-B[5-40/1]
KJPDT20L-P[20-30/0.01]-S[10-29/0.01]-B[5-40/1]
KJPDT25-P[15-23/0.01]-S[8-22/0.01]-B[5-40/1]
KJPDTC8-P[4-6/0.01]-S[3-5/0.01]-B[5-25/1]
KJPDTC10-P[4-8/0.01]-S[3-7/0.01]-B[5-25/1]
KJPDTC12-P[5-10/0.01]-S[3-9/0.01]-B[5-40/1]
KJPDTC16-P[8-14/0.01]-S[3-13/0.01]-B[5-40/1]
KJPDTC20-P[10-18/0.01]-S[5-17/0.01]-B[5-40/1]
KJPDTC25-P[15-23/0.01]-S[8-22/0.01]-B[5-40/1]
KJPDTH8-P[4-6/0.01]-S[3-5/0.01]-B[5-25/1]
KJPDTH10-P[4-8/0.01]-S[3-7/0.01]-B[5-25/1]
KJPDTH10L-P[10-16/0.01]-S[5-15/0.01]-B[5-40/1]
KJPDTH12-P[5-10/0.01]-S[3-9/0.01]-B[5-40/1]
KJPDTH12L-P[12-20/0.01]-S[6-19/0.01]-B[5-40/1]
KJPDTH16-P[8-14/0.01]-S[3-13/0.01]-B[5-40/1]
KJPDTH16L-P[16-25/0.01]-S[8-24/0.01]-B[5-40/1]
KJPDTH20-P[10-18/0.01]-S[5-17/0.01]-B[5-40/1]
KJPDTH20L-P[20-30/0.01]-S[10-29/0.01]-B[5-40/1]
KJPDTH25-P[15-23/0.01]-S[8-22/0.01]-B[5-40/1]
KJPDTN8-P[4-6/0.01]-B[5-25/1]
KJPDTN10-P[4-8/0.01]-B[5-25/1]
KJPDTN12-P[5-10/0.01]-B[5-40/1]
KJPDTN16-P[8-14/0.01]-B[5-40/1]
KJPDTN20-P[10-18/0.01]-B[5-40/1]
KJPDTN25-P[15-23/0.01]-B[5-40/1]
KJPDTNH8-P[4-6/0.01]-B[5-25/1]
KJPDTNH10-P[4-8/0.01]-B[5-25/1]
KJPDTNH12-P[5-10/0.01]-B[5-40/1]
KJPDTNH16-P[8-14/0.01]-B[5-40/1]
KJPDTNH20-P[10-18/0.01]-B[5-40/1]
KJPDTNH25-P[15-23/0.01]-B[5-40/1]
KJPDTS8-P[4-6/0.01]-S[3-5/0.01]-B[5-25/1]
KJPDTS10-P[4-8/0.01]-S[3-7/0.01]-B[5-25/1]
KJPDTS12-P[5-10/0.01]-S[3-9/0.01]-B[5-40/1]
KJPDTS16-P[8-14/0.01]-S[3-13/0.01]-B[5-40/1]
KJPDTS20-P[10-18/0.01]-S[5-17/0.01]-B[5-40/1]
KJPDTS25-P[15-23/0.01]-S[8-22/0.01]-B[5-40/1]
KJPGDT8-P[4-6/0.01]-S[3-5/0.01]-B[5-25/1]
KJPGDT10-P[4-8/0.01]-S[3-7/0.01]-B[5-25/1]
KJPGDT10L-P[10-16/0.01]-S[5-15/0.01]-B[5-40/1]
KJPGDT12-P[5-10/0.01]-S[3-9/0.01]-B[5-40/1]
KJPGDT12L-P[12-20/0.01]-S[6-19/0.01]-B[5-40/1]
KJPGDT16-P[8-14/0.01]-S[3-13/0.01]-B[5-40/1]
KJPGDT16L-P[16-25/0.01]-S[8-24/0.01]-B[5-40/1]
KJPGDT20-P[10-18/0.01]-S[5-17/0.01]-B[5-40/1]
KJPGDT20L-P[20-30/0.01]-S[10-29/0.01]-B[5-40/1]
KJPGDT25-P[15-23/0.01]-S[8-22/0.01]-B[5-40/1]
KJPGDTC8-P[4-6/0.01]-S[3-5/0.01]-B[5-25/1]
KJPGDTC10-P[4-8/0.01]-S[3-7/0.01]-B[5-25/1]
KJPGDTC12-P[5-10/0.01]-S[3-9/0.01]-B[5-40/1]
KJPGDTC16-P[8-14/0.01]-S[3-13/0.01]-B[5-40/1]
KJPGDTC20-P[10-18/0.01]-S[5-17/0.01]-B[5-40/1]
KJPGDTC25-P[15-23/0.01]-S[8-22/0.01]-B[5-40/1]
Part Number
Standard Unit Price
Minimum order quantityVolume Discount
Standard
Shipping Days
?
RoHSMaterial Hardness Large Head/Small Head Insertion Part S Dimension Tolerance Taper Shape Outer Dia. D
(Ø) 		B
(mm) 		K
(°) 		P
(mm) 		S
(mm) 		X
(mm)

-

1 9 Days 10[Steel] EN 1.1191 Equiv.No HardenedSmall Head0/-0.02Tapered Shape, Fixed85 ～ 25-4 ～ 63 ～ 5-

-

1 9 Days 10[Steel] EN 1.1191 Equiv.No HardenedSmall Head0/-0.02Tapered Shape, Fixed105 ～ 25-4 ～ 83 ～ 7-

-

1 9 Days 10[Steel] EN 1.1191 Equiv.No HardenedLarge Head0/-0.02Tapered Shape, Fixed105 ～ 40-10 ～ 165 ～ 15-

-

1 9 Days 10[Steel] EN 1.1191 Equiv.No HardenedSmall Head0/-0.02Tapered Shape, Fixed125 ～ 40-5 ～ 103 ～ 9-

-

1 9 Days 10[Steel] EN 1.1191 Equiv.No HardenedLarge Head0/-0.02Tapered Shape, Fixed125 ～ 40-12 ～ 206 ～ 19-

-

1 9 Days 10[Steel] EN 1.1191 Equiv.No HardenedSmall Head0/-0.02Tapered Shape, Fixed165 ～ 40-8 ～ 143 ～ 13-

-

1 9 Days 10[Steel] EN 1.1191 Equiv.No HardenedLarge Head0/-0.02Tapered Shape, Fixed165 ～ 40-16 ～ 258 ～ 24-

-

1 9 Days 10[Steel] EN 1.1191 Equiv.No HardenedSmall Head0/-0.02Tapered Shape, Fixed205 ～ 40-10 ～ 185 ～ 17-

-

1 9 Days 10[Steel] EN 1.1191 Equiv.No HardenedLarge Head0/-0.02Tapered Shape, Fixed205 ～ 40-20 ～ 3010 ～ 29-

-

1 9 Days 10[Steel] EN 1.1191 Equiv.No HardenedSmall Head0/-0.02Tapered Shape, Fixed255 ～ 40-15 ～ 238 ～ 22-

-

1 9 Days 10[Stainless Steel] EN 1.4037 Equiv.45 ~ 50HRCSmall Head0/-0.02Tapered Shape, Fixed85 ～ 25-4 ～ 63 ～ 5-

-

1 9 Days 10[Stainless Steel] EN 1.4037 Equiv.45 ~ 50HRCSmall Head0/-0.02Tapered Shape, Fixed105 ～ 25-4 ～ 83 ～ 7-

-

1 9 Days 10[Stainless Steel] EN 1.4037 Equiv.45 ~ 50HRCSmall Head0/-0.02Tapered Shape, Fixed125 ～ 40-5 ～ 103 ～ 9-

-

1 9 Days 10[Stainless Steel] EN 1.4037 Equiv.45 ~ 50HRCSmall Head0/-0.02Tapered Shape, Fixed165 ～ 40-8 ～ 143 ～ 13-

-

1 9 Days 10[Stainless Steel] EN 1.4037 Equiv.45 ~ 50HRCSmall Head0/-0.02Tapered Shape, Fixed205 ～ 40-10 ～ 185 ～ 17-

-

1 9 Days 10[Stainless Steel] EN 1.4037 Equiv.45 ~ 50HRCSmall Head0/-0.02Tapered Shape, Fixed255 ～ 40-15 ～ 238 ～ 22-

-

1 9 Days 10[Steel] EN 1.1191 Equiv.45HRC ~Small Head0/-0.02Tapered Shape, Fixed85 ～ 25-4 ～ 63 ～ 5-

-

1 9 Days 10[Steel] EN 1.1191 Equiv.45HRC ~Small Head0/-0.02Tapered Shape, Fixed105 ～ 25-4 ～ 83 ～ 7-

-

1 9 Days 10[Steel] EN 1.1191 Equiv.45HRC ~Large Head0/-0.02Tapered Shape, Fixed105 ～ 40-10 ～ 165 ～ 15-

-

1 9 Days 10[Steel] EN 1.1191 Equiv.45HRC ~Small Head0/-0.02Tapered Shape, Fixed125 ～ 40-5 ～ 103 ～ 9-

-

1 9 Days 10[Steel] EN 1.1191 Equiv.45HRC ~Large Head0/-0.02Tapered Shape, Fixed125 ～ 40-12 ～ 206 ～ 19-

-

1 9 Days 10[Steel] EN 1.1191 Equiv.45HRC ~Small Head0/-0.02Tapered Shape, Fixed165 ～ 40-8 ～ 143 ～ 13-

-

1 9 Days 10[Steel] EN 1.1191 Equiv.45HRC ~Large Head0/-0.02Tapered Shape, Fixed165 ～ 40-16 ～ 258 ～ 24-

-

1 9 Days 10[Steel] EN 1.1191 Equiv.45HRC ~Small Head0/-0.02Tapered Shape, Fixed205 ～ 40-10 ～ 185 ～ 17-

-

1 9 Days 10[Steel] EN 1.1191 Equiv.45HRC ~Large Head0/-0.02Tapered Shape, Fixed205 ～ 40-20 ～ 3010 ～ 29-

-

1 9 Days 10[Steel] EN 1.1191 Equiv.45HRC ~Small Head0/-0.02Tapered Shape, Fixed255 ～ 40-15 ～ 238 ～ 22-

-

1 9 Days 10[Steel] EN 1.1191 Equiv.No Hardened--Tapered, No Step85 ～ 25-4 ～ 6--

-

1 9 Days 10[Steel] EN 1.1191 Equiv.No Hardened--Tapered, No Step105 ～ 25-4 ～ 8--

-

1 9 Days 10[Steel] EN 1.1191 Equiv.No Hardened--Tapered, No Step125 ～ 40-5 ～ 10--

-

1 9 Days 10[Steel] EN 1.1191 Equiv.No Hardened--Tapered, No Step165 ～ 40-8 ～ 14--

-

1 9 Days 10[Steel] EN 1.1191 Equiv.No Hardened--Tapered, No Step205 ～ 40-10 ～ 18--

-

1 9 Days 10[Steel] EN 1.1191 Equiv.No Hardened--Tapered, No Step255 ～ 40-15 ～ 23--

-

1 9 Days 10[Steel] EN 1.1191 Equiv.45HRC ~--Tapered, No Step85 ～ 25-4 ～ 6--

-

1 9 Days 10[Steel] EN 1.1191 Equiv.45HRC ~--Tapered, No Step105 ～ 25-4 ～ 8--

-

1 9 Days 10[Steel] EN 1.1191 Equiv.45HRC ~--Tapered, No Step125 ～ 40-5 ～ 10--

-

1 9 Days 10[Steel] EN 1.1191 Equiv.45HRC ~--Tapered, No Step165 ～ 40-8 ～ 14--

-

1 9 Days 10[Steel] EN 1.1191 Equiv.45HRC ~--Tapered, No Step205 ～ 40-10 ～ 18--

-

1 9 Days 10[Steel] EN 1.1191 Equiv.45HRC ~--Tapered, No Step255 ～ 40-15 ～ 23--

-

1 9 Days 10[Stainless Steel] EN 1.4301 Equiv.No HardenedSmall Head0/-0.02Tapered Shape, Fixed85 ～ 25-4 ～ 63 ～ 5-

-

1 9 Days 10[Stainless Steel] EN 1.4301 Equiv.No HardenedSmall Head0/-0.02Tapered Shape, Fixed105 ～ 25-4 ～ 83 ～ 7-

-

1 9 Days 10[Stainless Steel] EN 1.4301 Equiv.No HardenedSmall Head0/-0.02Tapered Shape, Fixed125 ～ 40-5 ～ 103 ～ 9-

-

1 9 Days 10[Stainless Steel] EN 1.4301 Equiv.No HardenedSmall Head0/-0.02Tapered Shape, Fixed165 ～ 40-8 ～ 143 ～ 13-

-

1 9 Days 10[Stainless Steel] EN 1.4301 Equiv.No HardenedSmall Head0/-0.02Tapered Shape, Fixed205 ～ 40-10 ～ 185 ～ 17-

-

1 9 Days 10[Stainless Steel] EN 1.4301 Equiv.No HardenedSmall Head0/-0.02Tapered Shape, Fixed255 ～ 40-15 ～ 238 ～ 22-

-

1 9 Days 10[Steel] EN 1.1191 Equiv.No HardenedSmall Headg6Tapered Shape, Fixed85 ～ 25-4 ～ 63 ～ 5-

-

1 9 Days 10[Steel] EN 1.1191 Equiv.No HardenedSmall Headg6Tapered Shape, Fixed105 ～ 25-4 ～ 83 ～ 7-

-

1 9 Days 10[Steel] EN 1.1191 Equiv.No HardenedLarge Headg6Tapered Shape, Fixed105 ～ 40-10 ～ 165 ～ 15-

-

1 9 Days 10[Steel] EN 1.1191 Equiv.No HardenedSmall Headg6Tapered Shape, Fixed125 ～ 40-5 ～ 103 ～ 9-

-

1 9 Days 10[Steel] EN 1.1191 Equiv.No HardenedLarge Headg6Tapered Shape, Fixed125 ～ 40-12 ～ 206 ～ 19-

-

1 9 Days 10[Steel] EN 1.1191 Equiv.No HardenedSmall Headg6Tapered Shape, Fixed165 ～ 40-8 ～ 143 ～ 13-

-

1 9 Days 10[Steel] EN 1.1191 Equiv.No HardenedLarge Headg6Tapered Shape, Fixed165 ～ 40-16 ～ 258 ～ 24-

-

1 9 Days 10[Steel] EN 1.1191 Equiv.No HardenedSmall Headg6Tapered Shape, Fixed205 ～ 40-10 ～ 185 ～ 17-

-

1 9 Days 10[Steel] EN 1.1191 Equiv.No HardenedLarge Headg6Tapered Shape, Fixed205 ～ 40-20 ～ 3010 ～ 29-

-

1 9 Days 10[Steel] EN 1.1191 Equiv.No HardenedSmall Headg6Tapered Shape, Fixed255 ～ 40-15 ～ 238 ～ 22-

-

1 9 Days 10[Stainless Steel] EN 1.4037 Equiv.45 ~ 50HRC-g6Tapered Shape, Fixed85 ～ 25-4 ～ 63 ～ 5-

-

1 9 Days 10[Stainless Steel] EN 1.4037 Equiv.45 ~ 50HRC-g6Tapered Shape, Fixed105 ～ 25-4 ～ 83 ～ 7-

-

1 9 Days 10[Stainless Steel] EN 1.4037 Equiv.45 ~ 50HRC-g6Tapered Shape, Fixed125 ～ 40-5 ～ 103 ～ 9-

-

1 9 Days 10[Stainless Steel] EN 1.4037 Equiv.45 ~ 50HRC-g6Tapered Shape, Fixed165 ～ 40-8 ～ 143 ～ 13-

-

1 9 Days 10[Stainless Steel] EN 1.4037 Equiv.45 ~ 50HRC-g6Tapered Shape, Fixed205 ～ 40-10 ～ 185 ～ 17-

-

1 9 Days 10[Stainless Steel] EN 1.4037 Equiv.45 ~ 50HRC-g6Tapered Shape, Fixed255 ～ 40-15 ～ 238 ～ 22-

Loading...

  1. 1
  2. 2
  3. Next >>
 

Basic information

Type Slot Pin Shape Tapered Tip Shape Circular Shape
Tip Type Straight Shape of Stepped Section Circular Shape

Configure

Clear all

116Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.
The part number is completed.

Basic Attributes

  • Material

    • Steel
      • EN 1.1191 Equiv.
    • Stainless Steel
      • EN 1.4037 Equiv.
      • EN 1.4301 Equiv.

    Clear

  • Hardness

    • 45HRC ~
    • 45 ~ 50HRC
    • No Hardened

    Clear

  • Large Head/Small Head

    • Large Head
    • Small Head

    Clear

  • Insertion Part S Dimension Tolerance

    • 0/-0.02
    • g6

    Clear

  • Taper Shape

    • Angle Selectable
    • Tapered Shape, Fixed
    • Tapered, No Step
    • X Selectable

    Clear

  • Outer Dia. D(Ø)

    • 8
    • 10
    • 12
    • 16
    • 20
    • 25

    Clear

  • B(mm)

     [5-40/1mm Unit(s)]

    Clear

  • K(°)

    • 10
    • 15

    Clear

  • P(mm)

     [4-30/0.01mm Unit(s)]

    Clear

  • S(mm)

     [3-29/0.01mm Unit(s)]

    Clear

  • X(mm)

    • 1
    • 2
    • 3

    Clear

  • Type

    • KJPDT
    • KJPDTC
    • KJPDTH
    • KJPDTN
    • KJPDTNH
    • KJPDTS
    • KJPGDT
    • KJPGDTC
    • KJPGDTH
    • KJPGDTS
    • KJPKT
    • KJPKTC
    • KJPKTH
    • KJPKTS
    • KJPXT
    • KJPXTC
    • KJPXTH
    • KJPXTS

    Clear

  • Filter by CAD data type

    • 2D
    • 3D

    Clear

Filter by standard shipping days

    • All
    • 9 Days or Less

    Reset

Optional Attributes

Complementary Products

Tech Support

Technical Support
Tel：+49 69 668173-0 / FAX：+49 69 668173-360
Technical Inquiry

Payment Method

  • Payment on account
  • Pre Payment
  • PayPal

On-Demand Manufacturing

Change View

Certificates

  • ISO-9001
  • ISO-14001
  • AEO Certification
  • RoHS
  • REACH

MISUMI worldwide

Social Media

Legal notice

Copyright © MISUMI Corporation All Rights Reserved.