• Brands
  • Company
  • Contact
EN / UK
Type Code Seach | *NOT READY*
#CODE
Keyword suggestions
Part number suggestions
Discontinued Products

Slot Pins for Inspection Jigs / Stepped Diamond and Tapered Type

Slot Pins for Inspection Jigs / Stepped Diamond and Tapered Type

Click on this image to zoom in.

Click on this image to zoom in.

  • Slot Pins for Inspection Jigs / Stepped Diamond and Tapered Type
  • Slot Pins for Inspection Jigs / Stepped Diamond and Tapered Type

MISUMI

MISUMI

[Features] Tapered test pin that can pre-set a diamond shape. -You can choose between 2 shapes.

Data sheet

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

(1) Round tip type
Small Head: D = 8 to 25

(2) Tip cut type
Small Head: D = 8 to 25

Large Head: D = 10 L to 20 L[ ! ]4Large Head: D = 10 L to 20 L[ ! ]4

[ ! ]3

[ ! ]6

[ ! ]5

[ ! ]5

[ ! ]3

[ ! ]3

[ ! ]6

[ ! ]5

[ ! ]6

[ ! ]5

[ ! ]5

[ ! ]3

[ ! ]5

[ ! ]5

[ ! ]6

[ ! ]5

[ ! ]8

[ ! ] 1. For electroless nickel plating, please specify the alteration MN.
[ ! ] 2. EN 1.4125 Equiv. or 13Cr stainless steel has an identification groove on D part.
[ ! ] 3. For shorter handle length, specify the alteration ZC.
[ ! ] 4. Dimensions not specified are the same as those of Small Head Type.
[ ! ] 5. There is a relief groove that is approx. 1 mm wide (approx. 0.2 mm deep).
[ ! ] 6. P dimension section (tapered part) is not ground.
[ ! ] 7. The tip may have a centering hole.
[ ! ]8 K ≥ (S+0.3)
K =
　　Reference: sin30° = 0.5
　　 cos30° ≒ 0.866
[ ! ] Large Head Type (D = 10 L to 20 L) is available for EN 1.1191 Equiv. only.
[!] This product is hardened for the entire part.
[!] Unless otherwise specified, the dimension tolerance conforms to JIS B 0405 Class m. However, tapped depth, and angular dimension tolerances are excluded.
[M]Material [!] 1[H] Hardness(1) Round tip type(2) Tip cut type
TYPETYPE
S 0
−0.02		Sg6S 0
−0.02/F 0
−0.05		Sg6/F 0
−0.03
EN 1.1191 Equiv.-KJPDTKMKJPGDTKMKJPDTKKJPGDTK
EN 1.1191 Equiv.45HRC or moreKJPDTKMHKJPGDTKMHKJPDTHKKJPGDTHK
EN 1.4301 Equiv.-KJPDTKMSKJPGDTKMSKJPDTKSKJPGDTKS
[ ! ] 2 EN 1.4125 Equiv. or
13Cr Stainless Steel		45 to 50HRCKJPDTKMCKJPGDTKMCKJPDTKCKJPGDTKC

Specification Table

Part Number (TYPE·D)—P—S—F—B
KJPDTK12L—P16.00—S8.00—F2.2—B10
Sg6
3.00−0.002
−0.008
3.01 to 6.00−0.004
−0.012
6.01 to 10.00−0.005
−0.014
10.01 to 18.00−0.006
−0.017
18.01 to 29.00−0.007
−0.020
Part Number0.01 mm Increments0.1 mm Increments1 mm Increments(W)M
(Coarse)
(1) Round tip type(2) Tip cut typeDPS (P−1 ≥ S)F (F < S/2)
(2) Tip cut type only		B
S 0
−0.02		Sg6S 0
−0.02/F 0
−0.05		Sg6/F 0
−0.03
(EN 1.1191 Equiv.)
KJPDTKM

(EN 1.1191 Equiv. (hardened))
KJPDTKMH

(EN 1.4301 Equiv.)
KJPDTKMS

(EN 1.4125 Equiv. or
13Cr Stainless Steel)
KJPDTKMC		(EN 1.1191 Equiv.)
KJPGDTKM

(EN 1.1191 Equiv. (hardened))
KJPGDTKMH

(EN 1.4301 Equiv.)
KJPGDTKMS

(EN 1.4125 Equiv. or
13Cr Stainless Steel)
KJPGDTKMC		(EN 1.1191 Equiv.)
KJPDTK

(EN 1.1191 Equiv. (hardened))
KJPDTHK

(EN 1.4301 Equiv.)
KJPDTKS

(EN 1.4125 Equiv. or
13Cr Stainless Steel)
KJPDTKC		(EN 1.1191 Equiv.)
KJPGDTK
(EN 1.1191 Equiv. (hardened))

KJPGDTHK

(EN 1.4301 Equiv.)
KJPGDTKS

(EN 1.4125 Equiv. or
13Cr Stainless Steel)
KJPGDTKC		 84.00 to 6.003.00 to 5.000.3 to 2.05 to 25


For EN 1.4301 Equiv.
B ≤ S × 5		2M4
104.00 to 8.003.00 to 7.000.3 to 3.0M5
126.00 to 10.003.00 to 9.000.3 to 4.03
168.00 to 14.003.00 to 13.000.5 to 6.04
2012.00 to 18.005.00 to 17.001.0 to 8.06
2516.00 to 23.008.00 to 22.002.0 to 10.08
10 L10.00 to 16.005.00 to 15.001.0 to 7.04
12 L12.00 to 20.006.00 to 19.002.0 to 9.06
16 L16.00 to 25.008.00 to 24.002.0 to 11.08
20 L20.00 to 30.0010.00 to 29.002.0 to 14.0
[!] Large Head Type (D = 10 L to 20 L) is available for EN 1.1191 Equiv. only. [!] Please select S dimension so that S section is smaller than the diamond section.

Alterations

Part Number—P—S—F—B—(CH·KH ... etc.)
KJPDTK12—P8.00—S6.00—F2.2—B10—CH
KJPDTKMH16—P8.00—S5.00  —B15—ZC20−KH
AlterationsCodeSpec.
Additional Surface Treatment
(Electroless Nickel Plating)		MNElectroless nickel plating is applied.
[ ! ] Applicable to Material EN 1.1191 Equiv. only
[ NG ] Combination with STC is not available.
Additional Surface Treatment
(Black Oxide)		STCAdds black oxide surface treatment.
[ ! ] Applicable to Material EN 1.1191 Equiv. only
[ NG ] Combination with MN is not available.

Engraving of the Specified Characters

KFEngraves alphabet or number.
Ordering Code
KF−MISUMI0034
Printable Character: alphabet, number, . (period)

[ NG ] Not applicable to handle length 10

[ ! ] No symbols, such as a hyphen (-), other than those mentioned above may be used for engraving.

[ ! ] The pin's orientation toward the engraved characters is arbitrary.

[ ! ] Engraved on the reverse side when combined with KH.

[ ! ] Up to 8 digits max.

[ ! ] When combining with other options, enter this last.

Z (Handle)Max. Characters
Small HeadLarge Head
205—
30105
401210
50

Engraving of P Dimension

KHMachines flats on knurled head and engraves P dimension (with the character orientation arbitrary).
[ NG ] Not applicable to handle length 10
[ ! ] Engraved on the reverse side when combined with KF.
AlterationsCodeSpec.

Chain
Alterations

CHLoss-proof chain (length 600 mm) is attached to gauge body.

Handle Length

ZCChanges handle length to 10, 20, 30 or 40.
Ordering Code ZC20
[ ! ] Handle length 10 and 20 are available only when P ≥ 5 and pin length (10 + B) ≤ 30.
  　
[ ! ] For Large Head Type, only ZC30 and 40 are applicable.

[ NG ] For handle length 10, there is no tapped hole.

[ NG ] For handle length 10, combination with KH is not available.

No Relief Groove
NMNOmits the relief groove between knurled part and straight part on the step.
[ NG ] Not applicable to Large Head Type

KF Alteration (Engraving of Specified Characters) Precautions

(1) Please enter the characters you want after "KF-".
(2) Printable characters are alphabets, numbers, and periods (.).
(3) Numbers can be up to 8 characters.
(4) When combining with other alterations, enter KF last.
(5) You cannot use more than 1 period (.).
[Example]
　OK: KJPGSH16-P9.34-L30-STT-KH-KF-246625.5020
　NG: KJPGSH16-P9.34-L30-STT-KH-KF-246625..5020
　NG: KJPGSH16-P9.34-L30-STT-KH-KF-246.625.5020

Part Number:  

    3D preview is not available, because the part number has not yet been determined.

  • In order to open the 3D preview, the part number must be fixed.
Loading...

Plug-in is required for 3D Preview

CAD Download

Data to be displayed
30
45
60
  1. 1
  2. 2
  3. 3
  4. Next >>
Part Number
KJPDTHK8-P[4-6/0.01]-S[3-5/0.01]-F[0-2/0.1]-B[5-25/1]
KJPDTHK10-P[4-8/0.01]-S[3-7/0.01]-F[0-3/0.1]-B[5-25/1]
KJPDTHK10L-P[10-16/0.01]-S[5-15/0.01]-F[1-7/0.1]-B[5-25/1]
KJPDTHK12-P[6-10/0.01]-S[3-9/0.01]-F[0-4/0.1]-B[5-25/1]
KJPDTHK12L-P[12-20/0.01]-S[6-19/0.01]-F[2-9/0.1]-B[5-25/1]
KJPDTHK16-P[8-14/0.01]-S[3-13/0.01]-F[0.5-6/0.1]-B[5-25/1]
KJPDTHK16L-P[16-25/0.01]-S[8-24/0.01]-F[2-11/0.1]-B[5-25/1]
KJPDTHK20-P[12-18/0.01]-S[5-17/0.01]-F[1-8/0.1]-B[5-25/1]
KJPDTHK20L-P[20-30/0.01]-S[10-29/0.01]-F[2-14/0.1]-B[5-25/1]
KJPDTHK25-P[16-23/0.01]-S[8-22/0.01]-F[2-10/0.1]-B[5-25/1]
KJPDTK8-P[4-6/0.01]-S[3-5/0.01]-F[0-2/0.1]-B[5-25/1]
KJPDTK10-P[4-8/0.01]-S[3-7/0.01]-F[0.3-3/0.1]-B[5-25/1]
KJPDTK10L-P[10-16/0.01]-S[5-15/0.01]-F[1-7/0.1]-B[5-25/1]
KJPDTK12-P[6-10/0.01]-S[3-9/0.01]-F[0-4/0.1]-B[5-25/1]
KJPDTK12L-P[12-20/0.01]-S[6-19/0.01]-F[2-9/0.1]-B[5-25/1]
KJPDTK16-P[8-14/0.01]-S[3-13/0.01]-F[0.5-6/0.1]-B[5-25/1]
KJPDTK16L-P[16-25/0.01]-S[8-24/0.01]-F[2-11/0.1]-B[5-25/1]
KJPDTK20-P[12-18/0.01]-S[5-17/0.01]-F[1-8/0.1]-B[5-25/1]
KJPDTK20L-P[20-30/0.01]-S[10-29/0.01]-F[2-14/0.1]-B[5-25/1]
KJPDTK25-P[16-23/0.01]-S[8-22/0.01]-F[2-10/0.1]-B[5-25/1]
KJPDTKC8-P[4-6/0.01]-S[3-5/0.01]-F[0.3-2/0.1]-B[5-25/1]
KJPDTKC10-P[4-8/0.01]-S[3-7/0.01]-F[0.3-3/0.1]-B[5-25/1]
KJPDTKC12-P[6-10/0.01]-S[3-9/0.01]-F[0.3-4/0.1]-B[5-25/1]
KJPDTKC16-P[8-14/0.01]-S[3-13/0.01]-F[0.5-6/0.1]-B[5-25/1]
KJPDTKC20-P[12-18/0.01]-S[5-17/0.01]-F[1-8/0.1]-B[5-25/1]
KJPDTKC25-P[16-23/0.01]-S[8-22/0.01]-F[2-10/0.1]-B[5-25/1]
KJPDTKM8-P[4-6/0.01]-S[3-5/0.01]-B[5-25/1]
KJPDTKM10-P[4-8/0.01]-S[3-7/0.01]-B[5-25/1]
KJPDTKM10L-P[10-16/0.01]-S[5-15/0.01]-B[5-25/1]
KJPDTKM12-P[6-10/0.01]-S[3-9/0.01]-B[5-25/1]
KJPDTKM12L-P[12-20/0.01]-S[6-19/0.01]-B[5-25/1]
KJPDTKM16-P[8-14/0.01]-S[3-13/0.01]-B[5-25/1]
KJPDTKM16L-P[16-25/0.01]-S[8-24/0.01]-B[5-25/1]
KJPDTKM20-P[12-18/0.01]-S[5-17/0.01]-B[5-25/1]
KJPDTKM20L-P[20-30/0.01]-S[10-29/0.01]-B[5-25/1]
KJPDTKM25-P[16-23/0.01]-S[8-22/0.01]-B[5-25/1]
KJPDTKMC8-P[4-6/0.01]-S[3-5/0.01]-B[5-25/1]
KJPDTKMC10-P[4-8/0.01]-S[3-7/0.01]-B[5-25/1]
KJPDTKMC12-P[6-10/0.01]-S[3-9/0.01]-B[5-25/1]
KJPDTKMC16-P[8-14/0.01]-S[3-13/0.01]-B[5-25/1]
KJPDTKMC20-P[12-18/0.01]-S[5-17/0.01]-B[5-25/1]
KJPDTKMC25-P[16-23/0.01]-S[8-22/0.01]-B[5-25/1]
KJPDTKMH8-P[4-6/0.01]-S[3-5/0.01]-B[5-25/1]
KJPDTKMH10-P[4-8/0.01]-S[3-7/0.01]-B[5-25/1]
KJPDTKMH10L-P[10-16/0.01]-S[5-15/0.01]-B[5-25/1]
KJPDTKMH12-P[6-10/0.01]-S[3-9/0.01]-B[5-25/1]
KJPDTKMH12L-P[12-20/0.01]-S[6-19/0.01]-B[5-25/1]
KJPDTKMH16-P[8-14/0.01]-S[3-13/0.01]-B[5-25/1]
KJPDTKMH16L-P[16-25/0.01]-S[8-24/0.01]-B[5-25/1]
KJPDTKMH20-P[12-18/0.01]-S[5-17/0.01]-B[5-25/1]
KJPDTKMH20L-P[20-30/0.01]-S[10-29/0.01]-B[5-25/1]
KJPDTKMH25-P[16-23/0.01]-S[8-22/0.01]-B[5-25/1]
KJPDTKMS8-P[4-6/0.01]-S[3-5/0.01]-B[5-25/1]
KJPDTKMS10-P[4-8/0.01]-S[3-7/0.01]-B[5-25/1]
KJPDTKMS12-P[6-10/0.01]-S[3-9/0.01]-B[5-25/1]
KJPDTKMS16-P[8-14/0.01]-S[3-13/0.01]-B[5-25/1]
KJPDTKMS20-P[12-18/0.01]-S[5-17/0.01]-B[5-25/1]
KJPDTKMS25-P[16-23/0.01]-S[8-22/0.01]-B[5-25/1]
KJPDTKS8-P[4-6/0.01]-S[3-5/0.01]-F[0.3-2/0.1]-B[5-25/1]
KJPDTKS10-P[4-8/0.01]-S[3-7/0.01]-F[0.3-3/0.1]-B[5-25/1]
Part Number
Standard Unit Price
Minimum order quantityVolume Discount
Standard
Shipping Days
?
RoHSTip Shape Material Hardness Large Head/Small Head Insertion Part S Dimension Tolerance Outer Dia. D
(Ø) 		B
(mm) 		F
(mm) 		P
(mm) 		S
(mm)

-

1 9 Days 10D Cut[Steel] EN 1.1191 Equiv.45HRC ~Small Head0/-0.0285 ～ 250 ～ 24 ～ 63 ～ 5

-

1 9 Days 10D Cut[Steel] EN 1.1191 Equiv.45HRC ~Small Head0/-0.02105 ～ 250 ～ 34 ～ 83 ～ 7

-

1 9 Days 10D Cut[Steel] EN 1.1191 Equiv.45HRC ~Large Head0/-0.02105 ～ 251 ～ 710 ～ 165 ～ 15

-

1 9 Days 10D Cut[Steel] EN 1.1191 Equiv.45HRC ~Small Head0/-0.02125 ～ 250 ～ 46 ～ 103 ～ 9

-

1 9 Days 10D Cut[Steel] EN 1.1191 Equiv.45HRC ~Large Head0/-0.02125 ～ 252 ～ 912 ～ 206 ～ 19

-

1 9 Days 10D Cut[Steel] EN 1.1191 Equiv.45HRC ~Small Head0/-0.02165 ～ 250.5 ～ 68 ～ 143 ～ 13

-

1 9 Days 10D Cut[Steel] EN 1.1191 Equiv.45HRC ~Large Head0/-0.02165 ～ 252 ～ 1116 ～ 258 ～ 24

-

1 9 Days 10D Cut[Steel] EN 1.1191 Equiv.45HRC ~Small Head0/-0.02205 ～ 251 ～ 812 ～ 185 ～ 17

-

1 9 Days 10D Cut[Steel] EN 1.1191 Equiv.45HRC ~Large Head0/-0.02205 ～ 252 ～ 1420 ～ 3010 ～ 29

-

1 9 Days 10D Cut[Steel] EN 1.1191 Equiv.45HRC ~Small Head0/-0.02255 ～ 252 ～ 1016 ～ 238 ～ 22

-

1 9 Days 10D Cut[Steel] EN 1.1191 Equiv.No HardenedSmall Head0/-0.0285 ～ 250 ～ 24 ～ 63 ～ 5

-

1 9 Days 10D Cut[Steel] EN 1.1191 Equiv.No HardenedSmall Head0/-0.02105 ～ 250.3 ～ 34 ～ 83 ～ 7

-

1 9 Days 10D Cut[Steel] EN 1.1191 Equiv.No HardenedLarge Head0/-0.02105 ～ 251 ～ 710 ～ 165 ～ 15

-

1 9 Days 10D Cut[Steel] EN 1.1191 Equiv.No HardenedSmall Head0/-0.02125 ～ 250 ～ 46 ～ 103 ～ 9

-

1 9 Days 10D Cut[Steel] EN 1.1191 Equiv.No HardenedLarge Head0/-0.02125 ～ 252 ～ 912 ～ 206 ～ 19

-

1 9 Days 10D Cut[Steel] EN 1.1191 Equiv.No HardenedSmall Head0/-0.02165 ～ 250.5 ～ 68 ～ 143 ～ 13

-

1 9 Days 10D Cut[Steel] EN 1.1191 Equiv.No HardenedLarge Head0/-0.02165 ～ 252 ～ 1116 ～ 258 ～ 24

-

1 9 Days 10D Cut[Steel] EN 1.1191 Equiv.No HardenedSmall Head0/-0.02205 ～ 251 ～ 812 ～ 185 ～ 17

-

1 9 Days 10D Cut[Steel] EN 1.1191 Equiv.No HardenedLarge Head0/-0.02205 ～ 252 ～ 1420 ～ 3010 ～ 29

-

1 9 Days 10D Cut[Steel] EN 1.1191 Equiv.No HardenedSmall Head0/-0.02255 ～ 252 ～ 1016 ～ 238 ～ 22

-

1 9 Days 10D Cut[Stainless Steel] EN 1.4037 Equiv.No HardenedSmall Head0/-0.0285 ～ 250.3 ～ 24 ～ 63 ～ 5

-

1 9 Days 10D Cut[Stainless Steel] EN 1.4037 Equiv.No HardenedSmall Head0/-0.02105 ～ 250.3 ～ 34 ～ 83 ～ 7

-

1 9 Days 10D Cut[Stainless Steel] EN 1.4037 Equiv.No HardenedSmall Head0/-0.02125 ～ 250.3 ～ 46 ～ 103 ～ 9

-

1 9 Days 10D Cut[Stainless Steel] EN 1.4037 Equiv.No HardenedSmall Head0/-0.02165 ～ 250.5 ～ 68 ～ 143 ～ 13

-

1 9 Days 10D Cut[Stainless Steel] EN 1.4037 Equiv.No HardenedSmall Head0/-0.02205 ～ 251 ～ 812 ～ 185 ～ 17

-

1 9 Days 10D Cut[Stainless Steel] EN 1.4037 Equiv.No HardenedSmall Head0/-0.02255 ～ 252 ～ 1016 ～ 238 ～ 22

-

1 9 Days 10Circular Shape[Steel] EN 1.1191 Equiv.No HardenedSmall Head0/-0.0285 ～ 25-4 ～ 63 ～ 5

-

1 9 Days 10Circular Shape[Steel] EN 1.1191 Equiv.No HardenedSmall Head0/-0.02105 ～ 25-4 ～ 83 ～ 7

-

1 9 Days 10Circular Shape[Steel] EN 1.1191 Equiv.No HardenedLarge Head0/-0.02105 ～ 25-10 ～ 165 ～ 15

-

1 9 Days 10Circular Shape[Steel] EN 1.1191 Equiv.No HardenedSmall Head0/-0.02125 ～ 25-6 ～ 103 ～ 9

-

1 9 Days 10Circular Shape[Steel] EN 1.1191 Equiv.No HardenedLarge Head0/-0.02125 ～ 25-12 ～ 206 ～ 19

-

1 9 Days 10Circular Shape[Steel] EN 1.1191 Equiv.No HardenedSmall Head0/-0.02165 ～ 25-8 ～ 143 ～ 13

-

1 9 Days 10Circular Shape[Steel] EN 1.1191 Equiv.No HardenedLarge Head0/-0.02165 ～ 25-16 ～ 258 ～ 24

-

1 9 Days 10Circular Shape[Steel] EN 1.1191 Equiv.No HardenedSmall Head0/-0.02205 ～ 25-12 ～ 185 ～ 17

-

1 9 Days 10Circular Shape[Steel] EN 1.1191 Equiv.No HardenedLarge Head0/-0.02205 ～ 25-20 ～ 3010 ～ 29

-

1 9 Days 10Circular Shape[Steel] EN 1.1191 Equiv.No HardenedSmall Head0/-0.02255 ～ 25-16 ～ 238 ～ 22

-

1 9 Days 10Circular Shape[Stainless Steel] EN 1.4037 Equiv.45 ~ 50HRCSmall Head0/-0.0285 ～ 25-4 ～ 63 ～ 5

-

1 9 Days 10Circular Shape[Stainless Steel] EN 1.4037 Equiv.45 ~ 50HRCSmall Head0/-0.02105 ～ 25-4 ～ 83 ～ 7

-

1 9 Days 10Circular Shape[Stainless Steel] EN 1.4037 Equiv.45 ~ 50HRCSmall Head0/-0.02125 ～ 25-6 ～ 103 ～ 9

-

1 9 Days 10Circular Shape[Stainless Steel] EN 1.4037 Equiv.45 ~ 50HRCSmall Head0/-0.02165 ～ 25-8 ～ 143 ～ 13

-

1 9 Days 10Circular Shape[Stainless Steel] EN 1.4037 Equiv.45 ~ 50HRCSmall Head0/-0.02205 ～ 25-12 ～ 185 ～ 17

-

1 9 Days 10Circular Shape[Stainless Steel] EN 1.4037 Equiv.45 ~ 50HRCSmall Head0/-0.02255 ～ 25-16 ～ 238 ～ 22

-

1 9 Days 10Circular Shape[Steel] EN 1.1191 Equiv.45HRC ~Small Head0/-0.0285 ～ 25-4 ～ 63 ～ 5

-

1 9 Days 10Circular Shape[Steel] EN 1.1191 Equiv.45HRC ~Small Head0/-0.02105 ～ 25-4 ～ 83 ～ 7

-

1 9 Days 10Circular Shape[Steel] EN 1.1191 Equiv.45HRC ~Large Head0/-0.02105 ～ 25-10 ～ 165 ～ 15

-

1 9 Days 10Circular Shape[Steel] EN 1.1191 Equiv.45HRC ~Small Head0/-0.02125 ～ 25-6 ～ 103 ～ 9

-

1 9 Days 10Circular Shape[Steel] EN 1.1191 Equiv.45HRC ~Large Head0/-0.02125 ～ 25-12 ～ 206 ～ 19

-

1 9 Days 10Circular Shape[Steel] EN 1.1191 Equiv.45HRC ~Small Head0/-0.02165 ～ 25-8 ～ 143 ～ 13

-

1 9 Days 10Circular Shape[Steel] EN 1.1191 Equiv.45HRC ~Large Head0/-0.02165 ～ 25-16 ～ 258 ～ 24

-

1 9 Days 10Circular Shape[Steel] EN 1.1191 Equiv.45HRC ~Small Head0/-0.02205 ～ 25-12 ～ 185 ～ 17

-

1 9 Days 10Circular Shape[Steel] EN 1.1191 Equiv.45HRC ~Large Head0/-0.02205 ～ 25-20 ～ 3010 ～ 29

-

1 9 Days 10Circular Shape[Steel] EN 1.1191 Equiv.45HRC ~Small Head0/-0.02255 ～ 25-16 ～ 238 ～ 22

-

1 9 Days 10Circular Shape[Stainless Steel] EN 1.4301 Equiv.No HardenedSmall Head0/-0.0285 ～ 25-4 ～ 63 ～ 5

-

1 9 Days 10Circular Shape[Stainless Steel] EN 1.4301 Equiv.No HardenedSmall Head0/-0.02105 ～ 25-4 ～ 83 ～ 7

-

1 9 Days 10Circular Shape[Stainless Steel] EN 1.4301 Equiv.No HardenedSmall Head0/-0.02125 ～ 25-6 ～ 103 ～ 9

-

1 9 Days 10Circular Shape[Stainless Steel] EN 1.4301 Equiv.No HardenedSmall Head0/-0.02165 ～ 25-8 ～ 143 ～ 13

-

1 9 Days 10Circular Shape[Stainless Steel] EN 1.4301 Equiv.No HardenedSmall Head0/-0.02205 ～ 25-12 ～ 185 ～ 17

-

1 9 Days 10Circular Shape[Stainless Steel] EN 1.4301 Equiv.No HardenedSmall Head0/-0.02255 ～ 25-16 ～ 238 ～ 22

-

1 9 Days 10D Cut[Stainless Steel] EN 1.4301 Equiv.No HardenedSmall Head0/-0.0285 ～ 250.3 ～ 24 ～ 63 ～ 5

-

1 9 Days 10D Cut[Stainless Steel] EN 1.4301 Equiv.No HardenedSmall Head0/-0.02105 ～ 250.3 ～ 34 ～ 83 ～ 7

Loading...

  1. 1
  2. 2
  3. 3
  4. Next >>
 

Basic information

Type Slot Pin Shape Tapered Tip Type Straight
Shape of Stepped Section Diamond

Configure

Clear all

127Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.
The part number is completed.

Basic Attributes

  • Tip Shape

    • Circular Shape
    • D Cut

    Clear

  • Material

    • Steel
      • EN 1.1191 Equiv.
    • Stainless Steel
      • EN 1.4037 Equiv.
      • EN 1.4301 Equiv.

    Clear

  • Hardness

    • 45HRC ~
    • 45 ~ 50HRC
    • No Hardened

    Clear

  • Large Head/Small Head

    • Large Head
    • Small Head

    Clear

  • Insertion Part S Dimension Tolerance

    • 0/-0.02
    • g6

    Clear

  • Outer Dia. D(Ø)

    • 8
    • 10
    • 10L
    • 12
    • 12L
    • 16
    • 16L
    • 20
    • 20L
    • 25

    Clear

  • B(mm)

     [5-25/1mm Unit(s)]

    Clear

  • F(mm)

     [0-14/0.1mm Unit(s)]

    Clear

  • P(mm)

     [4-30/0.01mm Unit(s)]

    Clear

  • S(mm)

     [3-29/0.01mm Unit(s)]

    Clear

  • Type

    • KJPDTHK
    • KJPDTK
    • KJPDTKC
    • KJPDTKM
    • KJPDTKMC
    • KJPDTKMH
    • KJPDTKMS
    • KJPDTKS
    • KJPGDTHK
    • KJPGDTK
    • KJPGDTKC
    • KJPGDTKM
    • KJPGDTKMC
    • KJPGDTKMH
    • KJPGDTKMS
    • KJPGDTKS

    Clear

  • Filter by CAD data type

    • 2D
    • 3D

    Clear

Filter by standard shipping days

    • All
    • 9 Days or Less

    Reset

Optional Attributes

Complementary Products

Tech Support

Technical Support
Tel：+49 69 668173-0 / FAX：+49 69 668173-360
Technical Inquiry

Payment Method

  • Payment on account
  • Pre Payment
  • PayPal

On-Demand Manufacturing

Change View

Certificates

  • ISO-9001
  • ISO-14001
  • AEO Certification
  • RoHS
  • REACH

MISUMI worldwide

Social Media

Legal notice

Copyright © MISUMI Corporation All Rights Reserved.