• Brands
  • Company
  • Contact
EN / UK
Type Code Seach | *NOT READY*
#CODE
Keyword suggestions
Part number suggestions
Discontinued Products

Slot Pins for Inspection Jigs / Stepped and Threaded Type

Slot Pins for Inspection Jigs / Stepped and Threaded Type

MISUMI

MISUMI

Data sheet

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Small Head: D = 8 to 25

Large Head: D = 10 L to 20 L" ! "5

[ ! ]3

[ ! ]6

[ ! ]4

[ ! ]6

[ ! ]4

Slot Pins for Inspection Components - Straight Threaded With Step: Related Image
[ ! ] 1. For electroless nickel plating, please specify the alteration MN.
[ ! ] 2. EN 1.4125 Equiv. or 13Cr stainless steel has an identification groove on D part.
[ ! ] 3. When D = 8, the screws of handle change from M5 to M4.
[ ! ] 4. For shorter handle length, specify the alteration ZC.
[ ! ] 5. Dimensions not specified are the same as those of Small Head Type.
[!] 6. There is a relief groove that is approx. 1 mm wide (approx. 0.2 mm deep). To eliminate relief groove, specify the alteration NMN.
[ ! ] Large Head Type (D = 10 L to 20 L) is available for EN 1.1191 Equiv. only.
[!] This product is hardened for the entire part.
[ ! ] Unless otherwise specified, the dimension tolerance conforms to JIS B 0405 Class m. However, tapped depth is excluded.
[M]Material [!] 1[H] HardnessTYPE
P 0
−0.02		Pg6
EN 1.1191 Equiv.-KJPMKJPGM
EN 1.1191 Equiv.45HRC or moreKJPMHKJPGMH
EN 1.4301 Equiv.-KJPMSKJPGMS
[ ! ] 2 EN 1.4125 Equiv. or
13Cr Stainless Steel		45 to 50HRCKJPMCKJPGMC

Specification Table

Part Number (TYPE·D)—P—M—L—B
KJPMH16—P11.20—M6—L15—B10
Part Number0.01 mm IncrementsM (P ≥ M)
Selection		1 mm Increments
TypeDPLB
(P 0
−0.02)		(Pg6)
(EN 1.1191 Equiv.)
KJPM

(EN 1.1191 Equiv. (hardened))
KJPMH

(EN 1.4301 Equiv.)
KJPMS

(EN 1.4125 Equiv. or
13Cr Stainless Steel)
KJPMC		(EN 1.1191 Equiv.)
KJPGM

(EN 1.1191 Equiv. (hardened))
KJPGMH

(EN 1.4301 Equiv.)
KJPGMS

(EN 1.4125 Equiv. or
13Cr Stainless Steel)
KJPGMC		8 4.00 to 6.0034      0
2 to 35
(L ≤ P × 4)

When L = 0,
Specify P = 0.		5 to 25
(M < B ≤ M × 3)

For M3
(5 ≤ B ≤ M × 2)
10 5.00 to 8.00 4568   
12 5.00 to 10.00 456810S10 
16 8.00 to 14.00 456810S1012
2010.00 to 18.00  56810S1012
2515.00 to 23.00  56810S1012
10 L10.00 to 16.00 456810S10 
12 L12.00 to 20.00  56810S1012
16 L16.00 to 25.00   6810S1012(L+B ≤ 50)
20 L20.00 to 30.00   6810S1012
[!] S10 is fine thread (pitch 1.25). Others are coarse. [!] KJPND, KJPNDS (previous page) are more economical when L = 0.

Alterations

Part Number—P—M—L—B  
KJPM16—P0—M8—L0—B24—ZC40
AlterationsCodeSpec.
ChainSlot Pins for Inspection Components - Straight Threaded With Step: Related ImageCHLoss-proof chain (length 600 mm) is attached to gauge body.
Handle Length
Slot Pins for Inspection Components - Straight Threaded With Step: Related Image		ZCChanges handle length 50 to 10, 20, 30 or 40.
Ordering Code ZC20

[ ! ] Handle length 10 and 20 are available only when P ≥ 5 and pin length L + B (+ C) ≤ 30.

[ ! ] For Large Head Type, only ZC30 and 40 are applicable

[ NG ] For handle length 10, there is no tapped hole.

[ NG ] For handle length 10, combination with KH is not available.
Engraving of P Dimension
Slot Pins for Inspection Components - Straight Threaded With Step: Related Image		KHMachines flats on knurled head and engraves P dimension (with the character orientation arbitrary).
[ NG ] Not applicable to handle length 10
[ ! ] Engraved on the reverse side when combined with KF
Engraving of the Specified Characters
Slot Pins for Inspection Components - Straight Threaded With Step: Related Image		KFEngraves alphabet or number.
Ordering Code KF-MISUMI0034
Printable Character: alphabet, number, . (period)

[ NG ] Not applicable to handle length 10

[ ! ] No symbols, such as a hyphen (-), other than those mentioned above may be used for engraving.

[ ! ] The pin's orientation toward the engraved characters is arbitrary.

[ ! ] Engraved on the reverse side when combined with KH.

[ ! ] Up to 8 digits max.

Z (Handle)Max. Characters
Small HeadLarge Head
205-
30105
401210
50
AlterationsCodeSpec.
L Dimension Tolerance
Slot Pins for Inspection Components - Straight Threaded With Step: Related Image		LKCChanges L dimension tolerance to ±0.05.
Ordering Code LKC
[ ! ] When the LKC is used, L Dimension can be configured in 0.1 mm increments
[ ! ]L ≤ 30 [ ! ]P ≥ 4
No Relief Groove
Slot Pins for Inspection Components - Straight Threaded With Step: Related Image		NMNOmits the relief groove between knurled part and straight part on the step.
[ NG ] Not applicable to Large Head Type
Additional Surface Treatment
(Electroless Nickel Plating)		MNElectroless nickel plating is applied.
[ ! ] Applicable to Material EN 1.1191 Equiv. only
[ NG ] Combination with STC is not available.
Additional Surface Treatment
(Black Oxide)		STCAdds black oxide surface treatment.
[ ! ] Applicable to Material EN 1.1191 Equiv. only
[ NG ]Combination with MN is not available.

KF Alteration (Engraving of Specified Characters) Precautions

(1) Please enter the characters you want after "KF-".
(2) Printable characters are alphabets, numbers, and periods (.).
(3) Numbers can be up to 8 characters.
(4) When combining with other alterations, enter KF last.
(5) You cannot use more than 1 period (.).
[Example]
　OK: KJPGSH16-P9.34-L30-STT-KH-KF-246625.5020
　NG: KJPGSH16-P9.34-L30-STT-KH-KF-246625..5020
　NG: KJPGSH16-P9.34-L30-STT-KH-KF-246.625.5020

Part Number:  

    3D preview is not available, because the part number has not yet been determined.

  • In order to open the 3D preview, the part number must be fixed.
Loading...

Plug-in is required for 3D Preview

CAD Download

Data to be displayed
30
45
60
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. Next >>
Part Number
KJPGM8-P0-M[3,​4]-L0-B[5-25/1]
KJPGM8-P0-M[3,​4]-L[0-35/1]-B[5-25/1]
KJPGM8-P[4-6/0.01]-M[3,​4]-L0-B[5-25/1]
KJPGM8-P[4-6/0.01]-M[3,​4]-L[0-35/1]-B[5-25/1]
KJPGM10-P0-M[4,​5,​6,​8]-L0-B[5-25/1]
KJPGM10-P0-M[4,​5,​6,​8]-L[0-35/1]-B[5-25/1]
KJPGM10-P[5-8/0.01]-M[4,​5,​6,​8]-L0-B[5-25/1]
KJPGM10-P[5-8/0.01]-M[4,​5,​6,​8]-L[0-35/1]-B[5-25/1]
KJPGM10L-P0-M[4,​5,​6,​8,​10]-L0-B[5-25/1]
KJPGM10L-P0-M[4,​5,​6,​8,​10]-L[0-35/1]-B[5-25/1]
KJPGM10L-P0-MS10-L0-B[5-25/1]
KJPGM10L-P0-MS10-L[0-35/1]-B[5-25/1]
KJPGM10L-P[10-16/0.01]-M[4,​5,​6,​8,​10]-L0-B[5-25/1]
KJPGM10L-P[10-16/0.01]-M[4,​5,​6,​8,​10]-L[0-35/1]-B[5-25/1]
KJPGM10L-P[10-16/0.01]-MS10-L0-B[5-25/1]
KJPGM10L-P[10-16/0.01]-MS10-L[0-35/1]-B[5-25/1]
KJPGM12-P0-M[4,​5,​6,​8,​10]-L0-B[5-25/1]
KJPGM12-P0-M[4,​5,​6,​8,​10]-L[0-35/1]-B[5-25/1]
KJPGM12-P0-MS10-L0-B[5-25/1]
KJPGM12-P0-MS10-L[0-35/1]-B[5-25/1]
KJPGM12-P[5-10/0.01]-M[4,​5,​6,​8,​10]-L0-B[5-25/1]
KJPGM12-P[5-10/0.01]-M[4,​5,​6,​8,​10]-L[0-35/1]-B[5-25/1]
KJPGM12-P[5-10/0.01]-MS10-L0-B[5-25/1]
KJPGM12-P[5-10/0.01]-MS10-L[0-35/1]-B[5-25/1]
KJPGM12L-P0-M[5,​6,​8,​10,​12]-L0-B[5-25/1]
KJPGM12L-P0-M[5,​6,​8,​10,​12]-L[0-35/1]-B[5-25/1]
KJPGM12L-P0-MS10-L0-B[5-25/1]
KJPGM12L-P0-MS10-L[0-35/1]-B[5-25/1]
KJPGM12L-P[12-20/0.01]-M[5,​6,​8,​10,​12]-L0-B[5-25/1]
KJPGM12L-P[12-20/0.01]-M[5,​6,​8,​10,​12]-L[0-35/1]-B[5-25/1]
KJPGM12L-P[12-20/0.01]-MS10-L0-B[5-25/1]
KJPGM12L-P[12-20/0.01]-MS10-L[0-35/1]-B[5-25/1]
KJPGM16-P0-M[4,​5,​6,​8,​10,​12]-L0-B[5-25/1]
KJPGM16-P0-M[4,​5,​6,​8,​10,​12]-L[1-35/1]-B[5-25/1]
KJPGM16-P0-MS10-L0-B[5-25/1]
KJPGM16-P0-MS10-L[1-35/1]-B[5-25/1]
KJPGM16-P[8-14/0.01]-M[4,​5,​6,​8,​10,​12]-L0-B[5-25/1]
KJPGM16-P[8-14/0.01]-M[4,​5,​6,​8,​10,​12]-L[1-35/1]-B[5-25/1]
KJPGM16-P[8-14/0.01]-MS10-L0-B[5-25/1]
KJPGM16-P[8-14/0.01]-MS10-L[1-35/1]-B[5-25/1]
KJPGM16L-P0-M[6,​8,​10,​12]-L0-B[5-25/1]
KJPGM16L-P0-M[6,​8,​10,​12]-L[0-35/1]-B[5-25/1]
KJPGM16L-P0-MS10-L0-B[5-25/1]
KJPGM16L-P0-MS10-L[0-35/1]-B[5-25/1]
KJPGM16L-P[16-25/0.01]-M[6,​8,​10,​12]-L0-B[5-25/1]
KJPGM16L-P[16-25/0.01]-M[6,​8,​10,​12]-L[0-35/1]-B[5-25/1]
KJPGM16L-P[16-25/0.01]-MS10-L0-B[5-25/1]
KJPGM16L-P[16-25/0.01]-MS10-L[0-35/1]-B[5-25/1]
KJPGM20-P0-M[5,​6,​8,​10,​12]-L0-B[5-25/1]
KJPGM20-P0-M[5,​6,​8,​10,​12]-L[0-35/1]-B[5-25/1]
KJPGM20-P0-MS10-L0-B[5-25/1]
KJPGM20-P0-MS10-L[0-35/1]-B[5-25/1]
KJPGM20-P[10-18/0.01]-M[5,​6,​8,​10,​12]-L0-B[5-25/1]
KJPGM20-P[10-18/0.01]-M[5,​6,​8,​10,​12]-L[0-35/1]-B[5-25/1]
KJPGM20-P[10-18/0.01]-MS10-L0-B[5-25/1]
KJPGM20-P[10-18/0.01]-MS10-L[0-35/1]-B[5-25/1]
KJPGM20L-P0-M[6,​8,​10,​12]-L0-B[5-25/1]
KJPGM20L-P0-M[6,​8,​10,​12]-L[0-35/1]-B[5-25/1]
KJPGM20L-P0-MS10-L0-B[5-25/1]
KJPGM20L-P0-MS10-L[0-35/1]-B[5-25/1]
Part Number
Standard Unit Price
Minimum order quantityVolume Discount
Standard
Shipping Days
?
RoHSMaterial Hardness Large Head/Small Head Insertion Part P Dimension Tolerance Outer Dia. D
(Ø) 		B
(mm) 		L
(mm) 		P
(mm) 		Thread Dia. Selection (Coarse) [M]
(mm) 		Thread Dia. Selection (Fine) [MS]
(mm)

-

1 9 Days 10[Steel] EN 1.1191 Equiv.No HardenedSmall Headg685 ～ 25-03 ～ 4-

-

1 9 Days 10[Steel] EN 1.1191 Equiv.No HardenedSmall Headg685 ～ 250 ～ 3503 ～ 4-

-

1 9 Days 10[Steel] EN 1.1191 Equiv.No HardenedSmall Headg685 ～ 25-4 ～ 63 ～ 4-

-

1 9 Days 10[Steel] EN 1.1191 Equiv.No HardenedSmall Headg685 ～ 250 ～ 354 ～ 63 ～ 4-

-

1 9 Days 10[Steel] EN 1.1191 Equiv.No HardenedSmall Headg6105 ～ 25-04 ～ 8-

-

1 9 Days 10[Steel] EN 1.1191 Equiv.No HardenedSmall Headg6105 ～ 250 ～ 3504 ～ 8-

-

1 9 Days 10[Steel] EN 1.1191 Equiv.No HardenedSmall Headg6105 ～ 25-5 ～ 84 ～ 8-

-

1 9 Days 10[Steel] EN 1.1191 Equiv.No HardenedSmall Headg6105 ～ 250 ～ 355 ～ 84 ～ 8-

-

1 9 Days 10[Steel] EN 1.1191 Equiv.No HardenedLarge Headg6105 ～ 25-04 ～ 10-

-

1 9 Days 10[Steel] EN 1.1191 Equiv.No HardenedLarge Headg6105 ～ 250 ～ 3504 ～ 10-

-

1 9 Days 10[Steel] EN 1.1191 Equiv.No HardenedLarge Headg6105 ～ 25-0-10

-

1 9 Days 10[Steel] EN 1.1191 Equiv.No HardenedLarge Headg6105 ～ 250 ～ 350-10

-

1 9 Days 10[Steel] EN 1.1191 Equiv.No HardenedLarge Headg6105 ～ 25-10 ～ 164 ～ 10-

-

1 9 Days 10[Steel] EN 1.1191 Equiv.No HardenedLarge Headg6105 ～ 250 ～ 3510 ～ 164 ～ 10-

-

1 9 Days 10[Steel] EN 1.1191 Equiv.No HardenedLarge Headg6105 ～ 25-10 ～ 16-10

-

1 9 Days 10[Steel] EN 1.1191 Equiv.No HardenedLarge Headg6105 ～ 250 ～ 3510 ～ 16-10

-

1 9 Days 10[Steel] EN 1.1191 Equiv.No HardenedSmall Headg6125 ～ 25-04 ～ 10-

-

1 9 Days 10[Steel] EN 1.1191 Equiv.No HardenedSmall Headg6125 ～ 250 ～ 3504 ～ 10-

-

1 9 Days 10[Steel] EN 1.1191 Equiv.No HardenedSmall Headg6125 ～ 25-0-10

-

1 9 Days 10[Steel] EN 1.1191 Equiv.No HardenedSmall Headg6125 ～ 250 ～ 350-10

-

1 9 Days 10[Steel] EN 1.1191 Equiv.No HardenedSmall Headg6125 ～ 25-5 ～ 104 ～ 10-

-

1 9 Days 10[Steel] EN 1.1191 Equiv.No HardenedSmall Headg6125 ～ 250 ～ 355 ～ 104 ～ 10-

-

1 9 Days 10[Steel] EN 1.1191 Equiv.No HardenedSmall Headg6125 ～ 25-5 ～ 10-10

-

1 9 Days 10[Steel] EN 1.1191 Equiv.No HardenedSmall Headg6125 ～ 250 ～ 355 ～ 10-10

-

1 9 Days 10[Steel] EN 1.1191 Equiv.No HardenedLarge Headg6125 ～ 25-05 ～ 12-

-

1 9 Days 10[Steel] EN 1.1191 Equiv.No HardenedLarge Headg6125 ～ 250 ～ 3505 ～ 12-

-

1 9 Days 10[Steel] EN 1.1191 Equiv.No HardenedLarge Headg6125 ～ 25-0-10

-

1 9 Days 10[Steel] EN 1.1191 Equiv.No HardenedLarge Headg6125 ～ 250 ～ 350-10

-

1 9 Days 10[Steel] EN 1.1191 Equiv.No HardenedLarge Headg6125 ～ 25-12 ～ 205 ～ 12-

-

1 9 Days 10[Steel] EN 1.1191 Equiv.No HardenedLarge Headg6125 ～ 250 ～ 3512 ～ 205 ～ 12-

-

1 9 Days 10[Steel] EN 1.1191 Equiv.No HardenedLarge Headg6125 ～ 25-12 ～ 20-10

-

1 9 Days 10[Steel] EN 1.1191 Equiv.No HardenedLarge Headg6125 ～ 250 ～ 3512 ～ 20-10

-

1 9 Days 10[Steel] EN 1.1191 Equiv.No HardenedSmall Headg6165 ～ 25-04 ～ 12-

-

1 9 Days 10[Steel] EN 1.1191 Equiv.No HardenedSmall Headg6165 ～ 251 ～ 3504 ～ 12-

-

1 9 Days 10[Steel] EN 1.1191 Equiv.No HardenedSmall Headg6165 ～ 25-0-10

-

1 9 Days 10[Steel] EN 1.1191 Equiv.No HardenedSmall Headg6165 ～ 251 ～ 350-10

-

1 9 Days 10[Steel] EN 1.1191 Equiv.No HardenedSmall Headg6165 ～ 25-8 ～ 144 ～ 12-

-

1 9 Days 10[Steel] EN 1.1191 Equiv.No HardenedSmall Headg6165 ～ 251 ～ 358 ～ 144 ～ 12-

-

1 9 Days 10[Steel] EN 1.1191 Equiv.No HardenedSmall Headg6165 ～ 25-8 ～ 14-10

-

1 9 Days 10[Steel] EN 1.1191 Equiv.No HardenedSmall Headg6165 ～ 251 ～ 358 ～ 14-10

-

1 9 Days 10[Steel] EN 1.1191 Equiv.No HardenedLarge Headg6165 ～ 25-06 ～ 12-

-

1 9 Days 10[Steel] EN 1.1191 Equiv.No HardenedLarge Headg6165 ～ 250 ～ 3506 ～ 12-

-

1 9 Days 10[Steel] EN 1.1191 Equiv.No HardenedLarge Headg6165 ～ 25-0-10

-

1 9 Days 10[Steel] EN 1.1191 Equiv.No HardenedLarge Headg6165 ～ 250 ～ 350-10

-

1 9 Days 10[Steel] EN 1.1191 Equiv.No HardenedLarge Headg6165 ～ 25-16 ～ 256 ～ 12-

-

1 9 Days 10[Steel] EN 1.1191 Equiv.No HardenedLarge Headg6165 ～ 250 ～ 3516 ～ 256 ～ 12-

-

1 9 Days 10[Steel] EN 1.1191 Equiv.No HardenedLarge Headg6165 ～ 25-16 ～ 25-10

-

1 9 Days 10[Steel] EN 1.1191 Equiv.No HardenedLarge Headg6165 ～ 250 ～ 3516 ～ 25-10

-

1 9 Days 10[Steel] EN 1.1191 Equiv.No HardenedSmall Headg6205 ～ 25-05 ～ 12-

-

1 9 Days 10[Steel] EN 1.1191 Equiv.No HardenedSmall Headg6205 ～ 250 ～ 3505 ～ 12-

-

1 9 Days 10[Steel] EN 1.1191 Equiv.No HardenedSmall Headg6205 ～ 25-0-10

-

1 9 Days 10[Steel] EN 1.1191 Equiv.No HardenedSmall Headg6205 ～ 250 ～ 350-10

-

1 9 Days 10[Steel] EN 1.1191 Equiv.No HardenedSmall Headg6205 ～ 25-10 ～ 185 ～ 12-

-

1 9 Days 10[Steel] EN 1.1191 Equiv.No HardenedSmall Headg6205 ～ 250 ～ 3510 ～ 185 ～ 12-

-

1 9 Days 10[Steel] EN 1.1191 Equiv.No HardenedSmall Headg6205 ～ 25-10 ～ 18-10

-

1 9 Days 10[Steel] EN 1.1191 Equiv.No HardenedSmall Headg6205 ～ 250 ～ 3510 ～ 18-10

-

1 9 Days 10[Steel] EN 1.1191 Equiv.No HardenedLarge Headg6205 ～ 25-06 ～ 12-

-

1 9 Days 10[Steel] EN 1.1191 Equiv.No HardenedLarge Headg6205 ～ 250 ～ 3506 ～ 12-

-

1 9 Days 10[Steel] EN 1.1191 Equiv.No HardenedLarge Headg6205 ～ 25-0-10

-

1 9 Days 10[Steel] EN 1.1191 Equiv.No HardenedLarge Headg6205 ～ 250 ～ 350-10

Loading...

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. Next >>
 

Basic information

Type Slot Pin Shape Straight Tip Shape Circular Shape
Tip Type Threads Shape of Stepped Section Circular Shape Stepped Single-Row Type

Configure

Clear all

448Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.
The part number is completed.

Basic Attributes

  • Material

    • Steel
      • EN 1.1191 Equiv.
    • Stainless Steel
      • EN 1.4037 Equiv.
      • EN 1.4301 Equiv.

    Clear

  • Hardness

    • 45HRC ~
    • 45 ~ 50HRC
    • No Hardened

    Clear

  • Large Head/Small Head

    • Large Head
    • Small Head

    Clear

  • Insertion Part P Dimension Tolerance

    • 0/-0.02
    • g6

    Clear

  • Outer Dia. D(Ø)

    • 8
    • 10
    • 12
    • 16
    • 20
    • 25

    Clear

  • B(mm)

     [5-25/1mm Unit(s)]

    Clear

  • L(mm)

     [0-35/1mm Unit(s)]

    Clear

  • P(mm)

    • 0

     [4-30/0.01mm Unit(s)]

    Clear

  • Thread Dia. Selection (Coarse) [M](mm)

    • 3
    • 4
    • 5
    • 6
    • 8
    • 10
    • 12

    Clear

  • Thread Dia. Selection (Fine) [MS](mm)

    • 10

    Clear

  • Type

    • KJPGM
    • KJPGMC
    • KJPGMH
    • KJPGMS
    • KJPM
    • KJPMC
    • KJPMH
    • KJPMS

    Clear

  • Filter by CAD data type

    • 2D
    • 3D

    Clear

Filter by standard shipping days

    • All
    • 9 Days or Less

    Reset

Optional Attributes

Complementary Products

Tech Support

Technical Support
Tel：+49 69 668173-0 / FAX：+49 69 668173-360
Technical Inquiry

Payment Method

  • Payment on account
  • Pre Payment
  • PayPal

On-Demand Manufacturing

Change View

Certificates

  • ISO-9001
  • ISO-14001
  • AEO Certification
  • RoHS
  • REACH

MISUMI worldwide

Social Media

Legal notice

Copyright © MISUMI Corporation All Rights Reserved.