• Brands
  • Company
  • Contact
EN / UK
Type Code Seach | *NOT READY*
#CODE
Keyword suggestions
Part number suggestions
Discontinued Products

Slot Pins for Inspection Jigs / Stepped Taper and Threaded Round and Diamond

Slot Pins for Inspection Jigs / Stepped Taper and Threaded Round and Diamond

Click on this image to zoom in.

Click on this image to zoom in.

MISUMI

MISUMI

Data sheet

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

[ ! ]1

[ ! ]2

[!] 1. For shorter handle length, specify the alteration ZC.
[ ! ] 2. P dimensioned section (tapered area) is not ground.
[ ! ] The handle of this product is not hardened.
[!] Unless otherwise specified, the dimension tolerance conforms to JIS B 0405 Class m. However, tapped depth, and angular dimension tolerances are excluded.
[M] Material[H] HardnessType
EN 1.1191 Equiv.—KJPKDT
45HRC or moreKJPKDTH

Specification Table

Part Number (TYPE·D)—P—S—M—B—C    
KJPKDT16—P10.00—S8—M5—B15—C10    
P(W)
6.00 or more 7.993.0
8.00 or more 9.994.0
10.00 to 14.994.5
15.00 to 19.997.0
20.00 to 23.009.5
Part NumberP
0.01 mm Increments		S (P−1 ≥ S)
1 mm Increments		M (Coarse)
S ≥ M Selection		B
1 mm Increments		C
1 mm Increments
TYPED
(EN 1.1191 Equiv.)
KJPKDT

(EN 1.1191 Equiv. (hardened))
KJPKDTH		106.00 to 10.005 to 9    5 to 405 to 36
(C ≤ M × 3)
126.00 to 12.005 to 11345
166.00 to 14.005 to 13
681012
207.00 to 18.006 to 17
257.00 to 23.006 to 22    

Alterations

○ Rotating, Diamond-shaped
Part Number—P—S—M—B—C—(CH·KH·ZC ... etc.)
KJPKDT16
KJPKDTH20		—
—		P10.00
P16.50		—
—		S8
S10		—
—		M5
M6		—
—		B15
B30		—
—		C10
C15		—
—		KH
ZC30
AlterationsCodeSpec.
Additional Surface Treatment
(Electroless Nickel Plating)		MNElectroless nickel plating is applied.
[ ! ] Applicable to Material EN 1.1191 Equiv. only
[ NG ] Combination with STC is not available.
Additional Surface Treatment
(Black Oxide)		STCAdds black oxide surface treatment.
[ ! ] Applicable to Material EN 1.1191 Equiv. equivalent only
[ NG ] Combination with MN is not available.
Engraving of the Specified Characters
KFEngraves alphabet or number.
Ordering Code KF-MISUMI0034
Printable Character: Alphabet
·Number ,. (period)

[ ! ] No symbols, such as a hyphen (-), other than those mentioned above may be used for engraving.

[ ! ] The pin's orientation toward the engraved characters is arbitrary.

[ NG ] Not applicable to handle length 10
[ ! ] Engraved on the reverse side when combined with KH.
[ ! ] Up to 8 digits max.
Z (Handle)Max. Characters
Small HeadLarge Head
205—
30105
401210
50
Engraving of P Dimension
KHMachines flats on knurled head and engraves P dimension (with the character orientation arbitrary).
[ NG ] Not applicable to handle length 10
[ ! ] Engraved on the reverse side when combined with KF.
AlterationsCodeSpec.
S Dimension Tolerance
SKCChanges S dimension tolerance to g6.
[ ! ] Applicable only to Angle K Selectable or X dim. Selectable Type
Handle Length
ZCChanges handle length 50 to 10, 20, 30 or 40.

[ ! ] For Rotating, Diamond-shaped type, ZC30 and 40 only are applicable.
When Z = 30, effective length of tap is 7.5.

[ NG ] For handle length 10, there is no tapped hole.

[ ! ] Handle length 10 and 20 are only available when P ≥ 5 and pin length (10 + L + B) ≤ 30.

[ ! ] For Large Head Type, only ZC30 and 40 are applicable.
[ NG ] For handle length 10, combination with KH is not available.
Chain
CHLoss-proof chain (length 600 mm) is attached to gauge body.
No Relief Groove
NMNOmits the relief groove between knurled part and straight part on the step.
[ NG ] Not applicable to Large Head Type

KF Alteration (Engraving of Specified Characters) Precautions

(1) Please enter the characters you want after "KF-".
(2) Printable characters are alphabets, numbers, and periods (.).
(3) Numbers can be up to 8 characters.
(4) When combining with other alterations, enter KF last.
(5) You cannot use more than 1 period (.).
[Example]
　OK: KJPGSH16-P9.34-L30-STT-KH-KF-246625.5020
　NG: KJPGSH16-P9.34-L30-STT-KH-KF-246625..5020
　NG: KJPGSH16-P9.34-L30-STT-KH-KF-246.625.5020

Part Number:  

    3D preview is not available, because the part number has not yet been determined.

  • In order to open the 3D preview, the part number must be fixed.
Loading...

Plug-in is required for 3D Preview

CAD Download

Data to be displayed
30
45
60
  1. 1
Part Number
KJPKDT10-P[6-10/0.01]-S[5-9/1]-M[3,​4,​5,​6,​8]-B[5-40/1]-C[5-36/1]
KJPKDT12-P[6-12/0.01]-S[5-11/1]-M[3,​4,​5,​6,​8,​10]-B[5-40/1]-C[5-36/1]
KJPKDT16-P[6-14/0.01]-S[5-13/1]-M[3,​4,​5,​6,​8,​10,​12]-B[5-40/1]-C[5-36/1]
KJPKDT20-P[7-18/0.01]-S[6-17/1]-M[3,​4,​5,​6,​8,​10,​12]-B[5-40/1]-C[5-36/1]
KJPKDT25-P[7-23/0.01]-S[6-22/1]-M[3,​4,​5,​6,​8,​10,​12]-B[5-40/1]-C[5-36/1]
KJPKDTH10-P[6-10/0.01]-S[5-9/1]-M[3,​4,​5,​6,​8]-B[5-40/1]-C[5-36/1]
KJPKDTH12-P[6-12/0.01]-S[5-11/1]-M[3,​4,​5,​6,​8,​10]-B[5-40/1]-C[5-36/1]
KJPKDTH16-P[6-14/0.01]-S[5-13/1]-M[3,​4,​5,​6,​8,​10,​12]-B[5-40/1]-C[5-36/1]
KJPKDTH20-P[7-18/0.01]-S[6-17/1]-M[3,​4,​5,​6,​8,​10,​12]-B[5-40/1]-C[5-36/1]
KJPKDTH25-P[7-23/0.01]-S[6-22/1]-M[3,​4,​5,​6,​8,​10,​12]-B[5-40/1]-C[5-36/1]
Part NumberMinimum order quantityVolume Discount
Standard
Shipping Days
?
RoHSHardness Outer Dia. D
(Ø) 		B
(mm) 		C
(mm) 		P
(mm) 		S
(mm) 		Thread Dia. Selection (Coarse) [M]
(mm)
1 9 Days 10No Hardened105 ～ 405 ～ 366 ～ 105 ～ 93 ～ 8
1 9 Days 10No Hardened125 ～ 405 ～ 366 ～ 125 ～ 113 ～ 10
1 9 Days 10No Hardened165 ～ 405 ～ 366 ～ 145 ～ 133 ～ 12
1 9 Days 10No Hardened205 ～ 405 ～ 367 ～ 186 ～ 173 ～ 12
1 9 Days 10No Hardened255 ～ 405 ～ 367 ～ 236 ～ 223 ～ 12
1 9 Days 1045HRC ~105 ～ 405 ～ 366 ～ 105 ～ 93 ～ 8
1 9 Days 1045HRC ~125 ～ 405 ～ 366 ～ 125 ～ 113 ～ 10
1 9 Days 1045HRC ~165 ～ 405 ～ 366 ～ 145 ～ 133 ～ 12
1 9 Days 1045HRC ~205 ～ 405 ～ 367 ～ 186 ～ 173 ～ 12
1 9 Days 1045HRC ~255 ～ 405 ～ 367 ～ 236 ～ 223 ～ 12

Loading...

  1. 1

Specifications/Overview

■KJPKDT Structure: Diamond part rotates.

App. Example


[ ! ] Diamond part rotates.
 

Basic information

Type Slot Pin Shape Stepped Tip Shape Circular Shape
Tip Type Threads Shape of Stepped Section Diamond Material EN 1.1191 Equiv.

Configure

Clear all

10Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.
The part number is completed.

Basic Attributes

  • Hardness

    • 45HRC ~
    • No Hardened

    Clear

  • Outer Dia. D(Ø)

    • 10
    • 12
    • 16
    • 20
    • 25

    Clear

  • B(mm)

     [5-40/1mm Unit(s)]

    Clear

  • C(mm)

     [5-36/1mm Unit(s)]

    Clear

  • P(mm)

     [6-23/0.01mm Unit(s)]

    Clear

  • S(mm)

     [5-22/1mm Unit(s)]

    Clear

  • Thread Dia. Selection (Coarse) [M](mm)

    • 3
    • 4
    • 5
    • 6
    • 8
    • 10
    • 12

    Clear

  • Type

    • KJPKDT
    • KJPKDTH

    Clear

  • Filter by CAD data type

    • 2D
    • 3D

    Clear

Filter by standard shipping days

    • All
    • 9 Days or Less

    Reset

Optional Attributes

Complementary Products

Tech Support

Technical Support
Tel：+49 69 668173-0 / FAX：+49 69 668173-360
Technical Inquiry

Payment Method

  • Payment on account
  • Pre Payment
  • PayPal

On-Demand Manufacturing

Change View

Certificates

  • ISO-9001
  • ISO-14001
  • AEO Certification
  • RoHS
  • REACH

MISUMI worldwide

Social Media

Legal notice

Copyright © MISUMI Corporation All Rights Reserved.