Pins for Inspection Jigs / GO and NO-GO / Reversible
[Features] Use it as a GO gauge or NO-GO gauge through a single pin.
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
- Drawing / Specifications
- 3D Preview 3D preview is available after complete configuration
- Part Numbers
- More Information
Dimensional Drawing
KJPRGN
[ ! ]1
[ ! ]2
[ ! ]2
[ ! ]1
* Tolerance, Effective Hardness Range
[!] Handles and pins may be joined with an adhesive. Note that heat or strong force may cause separation.[!] 1. When L = 50 and G, N < 3, G side is shaped as shown on the left. (Same for N side)
[ ! ] 2. Marks may remain on the bent sections.
Ordering Example
| Part Number (TYPE·D) | — | G | — | N |
| KJPRGN10 | — | G2.00 | — | N4.00 |
Specification Table
| Part Number | 0.01 mm Increments | L | ||
| Type | D | G | N (G < N) | |
| KJPRGN | 10 | 1.50 to 6.00 | 25 | |
| 10 L | 50 | |||
| 14 | 1.50 to 8.00 | 25 | ||
| 14 L | 50 | |||
Alterations
| Part Number | — | G | — | N | — | (KH·STC·MH·CH) |
| KJPRGN10 KJPRGN14L | — — | G2.00 G4.00 | — — | N4.00 N6.00 | — — | KH CH |
| Alterations | Code | Spec. |
 | KH | Machines flats on the knurled head, and engraves G and N dimensions. Ordering Code KH |
 | MH | Adds M4 tapped hole for the wire chain on the handle. [ ! ] When combined with KH, the tapped hole is on a flat surface. [ NG ] Combination with CH is not available |
| Additional Surface Treatment (Black Oxide) | STC | Adds black oxide surface treatment. [ ! ] Applicable to pins only |
Chain | CH | Loss-proof chain (length 600 mm) is attached to gauge body. [ ! ] Adds on a flat surface when combined with KH. [ NG ] Combination with MH is not available |
Part Number:
- In order to open the 3D preview, the part number must be fixed.
3D preview is not available, because the part number has not yet been determined.
Loading...
Part Number
|
|---|
| KJPRGN10-G[1.5-6/0.01]-N[1.5-6/0.01] |
| KJPRGN10L-G[1.5-6/0.01]-N[1.5-6/0.01] |
| KJPRGN14-G[1.5-8/0.01]-N[1.5-8/0.01] |
| KJPRGN14L-G[1.5-8/0.01]-N[1.5-8/0.01] |
| Part Number | Minimum order quantity | Volume Discount | Outer Dia. D (Ø) | L Dimension (mm) | G (mm) | N (mm) | |
|---|---|---|---|---|---|---|---|
| 1 | 9 Days | 10 | 25 | 1.5 ～ 6 | 1.5 ～ 6 | ||
| 1 | 9 Days | 10 | 50 | 1.5 ～ 6 | 1.5 ～ 6 | ||
| 1 | 9 Days | 14 | 25 | 1.5 ～ 8 | 1.5 ～ 8 | ||
| 1 | 9 Days | 14 | 50 | 1.5 ～ 8 | 1.5 ～ 8 |
Loading...
App. Example
Basic information
| Type | GO/NOGO Pins | Material | EN 1.1191 Equiv. | Hardness | No Hardened |
|---|
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Complementary Products
![[Precision] X-Axis / Cross Roller](http://content.misumi-ec.com/image/upload/f_auto,t_product_recommend_a/v1/p/jp/product/series/110300196460/110300196460_001.jpg)
Tech Support
- Technical Support
- Tel：+49 69 668173-0 / FAX：+49 69 668173-360
- Technical Inquiry
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.