• Brands
  • Company
  • Contact
EN / UK
Type Code Seach | *NOT READY*
#CODE
Keyword suggestions
Part number suggestions
Discontinued Products

Slot Pins for Inspection Jigs / Tappeded Ends Type

Slot Pins for Inspection Jigs / Tappeded Ends Type

Click on this image to zoom in.

Click on this image to zoom in.

MISUMI

MISUMI

[You can check the dimensions by clamping a product with internal thread.

Data sheet

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Tapped Pins for Inspection Jigs: Related Image
[!] Handles and pins may be joined with an adhesive. Note that heat or strong force may cause separation.
[!] P dim. tolerance is a general tolerance. For accuracy enhancement, specify the alteration KC.

[ ! ] The hardening conditions for this product are as follows.
·If D ≤ 10, the handle is unhardened.
·If 10 < D and 41 ≤ L, the handle is unhardened.

[ ! ] Unless otherwise specified, the dimension tolerance conforms to JIS B 0405 Class m. However, tapped depth is excluded.
[M] Material[H] HardnessTYPE
EN 1.1191 Equiv.—KJPNM
EN 1.1191 Equiv.45HRC or moreKJPNMH

Specification Table

Part Number (TYPE·D)—P—L—M
KJPNM20—P12.00—L80—M8
Part NumberP
0.01 mm Increments		L
1 mm Increments		M (Coarse)
P-4 ≥ M
Selection
TYPED
(EN 1.1191 Equiv.)
KJPNM

(EN 1.1191 Equiv. (hardened))
KJPNMH 		108.00 to 10.00When P < 12
10 to 100
When P ≥ 12
10 to 150		4 5 6 8 10
128.00 to 10.00
168.00 to 14.00
2010.00 to 18.00
2514.00 to 23.00
[ ! ] For D10, knurling may extend slightly to the pin part when difference from P dimension is none or small.

Alterations

Part Number—P—L—M—(CH·KH ... etc.)
KJPNMH16—P9.30—L100—M5—KC
AlterationsCodeSpec.

Chain

Tapped Pins for Inspection Jigs: Related Image		CHLoss-proof chain (length 600 mm) is attached to gauge body.

P Dimension Tolerance

Tapped Pins for Inspection Jigs: Related Image		KCChanges P dimension tolerance to 0 -0.02.

[ ! ] There may be a relief groove between handle part and pin part.

Engraving of P Dimension

Tapped Pins for Inspection Jigs: Related Image		KHMachines flats on knurled head and engraves P dimension (with the character orientation arbitrary).
AlterationsCodeSpec.
Additional Surface Treatment
(Electroless Nickel Plating)		MNElectroless nickel plating is applied.
[ NG ] Combination with STC is not available.  
Additional Surface Treatment
(Black Oxide)		STCAdds black oxide surface treatment.
[ NG ]Combination with MN is not available.

Handle Length

Tapped Pins for Inspection Jigs: Related Image		ZCChanges handle length 50 to 30 or 40.
Ordering Code ZC30
[ ! ] Applicable only when pin length L ≤ 30.

Caution when making alterations to engraving (KH)

Tapped Pins for Inspection Jigs: Related Image

[ ! ]If the pin and the knurled part are joined with an adhesive,
10 mm of the tip is not machined flat because the tip is thin.

Part Number:  

    3D preview is not available, because the part number has not yet been determined.

  • In order to open the 3D preview, the part number must be fixed.
Loading...

Plug-in is required for 3D Preview

CAD Download

Data to be displayed
30
45
60
  1. 1
Part Number
KJPNM10-P[8-10/0.01]-L[10-100/1]-M[4,​5,​6,​8,​10]
KJPNM12-P[8-10/0.01]-L[10-100/1]-M[4,​5,​6,​8,​10]
KJPNM16-P[8-14/0.01]-L[10-150/1]-M[4,​5,​6,​8,​10]
KJPNM20-P[10-18/0.01]-L[10-150/1]-M[4,​5,​6,​8,​10]
KJPNM25-P[14-23/0.01]-L[10-150/1]-M[4,​5,​6,​8,​10]
KJPNMH10-P[8-10/0.01]-L[10-100/1]-M[4,​5,​6,​8,​10]
KJPNMH12-P[8-10/0.01]-L[10-100/1]-M[4,​5,​6,​8,​10]
KJPNMH16-P[8-14/0.01]-L[10-150/1]-M[4,​5,​6,​8,​10]
KJPNMH20-P[10-18/0.01]-L[10-150/1]-M[4,​5,​6,​8,​10]
KJPNMH25-P[14-23/0.01]-L[10-150/1]-M[4,​5,​6,​8,​10]
Part NumberMinimum order quantityVolume Discount
Standard
Shipping Days
?
RoHSHardness Outer Dia. D
(Ø) 		L
(mm) 		P
(mm) 		Thread Dia. Selection (Coarse) [M]
(mm)
1 9 Days 10No Hardened1010 ～ 1008 ～ 104 ～ 10
1 9 Days 10No Hardened1210 ～ 1008 ～ 104 ～ 10
1 9 Days 10No Hardened1610 ～ 1508 ～ 144 ～ 10
1 9 Days 10No Hardened2010 ～ 15010 ～ 184 ～ 10
1 9 Days 10No Hardened2510 ～ 15014 ～ 234 ～ 10
1 9 Days 1045HRC ~1010 ～ 1008 ～ 104 ～ 10
1 9 Days 1045HRC ~1210 ～ 1008 ～ 104 ～ 10
1 9 Days 1045HRC ~1610 ～ 1508 ～ 144 ～ 10
1 9 Days 1045HRC ~2010 ～ 15010 ～ 184 ～ 10
1 9 Days 1045HRC ~2510 ～ 15014 ～ 234 ～ 10

Loading...

  1. 1

App. Example

Clamps objects.

Tapped Pins for Inspection Jigs: Related Image
 

Basic information

Type Slot Pin Shape Straight Tip Shape Circular Shape
Tip Type Tapped Shape of Stepped Section Circular Shape Material EN 1.1191 Equiv.

Configure

Clear all

10Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.
The part number is completed.

Basic Attributes

  • Hardness

    • 45HRC ~
    • No Hardened

    Clear

  • Outer Dia. D(Ø)

    • 10
    • 12
    • 16
    • 20
    • 25

    Clear

  • L(mm)

     [10-150/1mm Unit(s)]

    Clear

  • P(mm)

     [8-23/0.01mm Unit(s)]

    Clear

  • Thread Dia. Selection (Coarse) [M](mm)

    • 4
    • 5
    • 6
    • 8
    • 10

    Clear

  • Type

    • KJPNM
    • KJPNMH

    Clear

  • Filter by CAD data type

    • 2D
    • 3D

    Clear

Filter by standard shipping days

    • All
    • 9 Days or Less

    Reset

Optional Attributes

Complementary Products

Tech Support

Technical Support
Tel：+49 69 668173-0 / FAX：+49 69 668173-360
Technical Inquiry

Payment Method

  • Payment on account
  • Pre Payment
  • PayPal

On-Demand Manufacturing

Change View

Certificates

  • ISO-9001
  • ISO-14001
  • AEO Certification
  • RoHS
  • REACH

MISUMI worldwide

Social Media

Legal notice

Copyright © MISUMI Corporation All Rights Reserved.