• Brands
  • Company
  • Contact
EN / UK
Type Code Seach | *NOT READY*
#CODE
Keyword suggestions
Part number suggestions
Discontinued Products

Bushings for Inspection Jigs / Stepped Bore and Optional Shoulder Type

Bushings for Inspection Jigs / Stepped Bore and Optional Shoulder Type

Click on this image to zoom in.

Click on this image to zoom in.

MISUMI

MISUMI

[Features] Bushing that can be used in combination with a stepped dowel pin.

Data sheet

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Dimensional Drawing

[ ! ]1

[!] There is a relief groove for grinding on the bottom of the P dimension.
[ ! ] 1. When wall is 2 mm or less [(D - P)/2 ≤ 2], R is 0.5.
SH7
3.00+0.010
0
3.01 to 6.00+0.012
0
6.01 to 10.00+0.015
0
10.01 to 18.00+0.018
0
18.01 to 21.00+0.021
0
Dimension Tolerance of L and B
Dimension Range
Tolerance
(㎜)
Over
or less
0.5
3
±0.1
3
6
±0.1
6
30
±0.2
[ ! ]Compliant with JIS B 0405 Class m
(intermediate).
[M] Material[H] Hardness[S] Surface TreatmentType
S+0.03
+0.01		SH7
JIS−SKS93 Equivalent50 to 60HRC-KJBDKJBHD
JIS−SKS93 Equivalent50 to 60HRCElectroless Nickel PlatingKJBDMKJBHDM
EN 1.4301 Equiv.[!]2--KJBDSKJBHDS
[M]Material: EN 1.4305 Equiv.

Specification Table

Part Number—P—S—L—B
 
Type D
KJBD10—P5.02—S4.12—L15—B5
 
■S Tolerance+0.03
+0.01
Part NumberP
0.01 mm Increments		S (P > S)
0.01 mm Increments		L
1 mm Increments		B
1 mm Increments		R
TypeD
(JIS−SKS93 Hardened)
KJBD

(JIS−SKS93 Hardened, Electroless Nickel Plating)
KJBDM

(EN 1.4301 Equiv.)
KJBDS		8 4.00 to 6.003.00 to 5.003 to 25

L ≤ P × 3
No R for L3 and L4		5 to 25

When S ≤ 3.59
B ≤ S × 2.5
When S ≥ 3.60
B ≤ S × 3		1.0
10 4.00 to 8.003.00 to 7.002.0
12 5.00 to 10.003.00 to 9.002.0
16 8.00 to 14.004.00 to 13.002.0
2010.00 to 18.006.00 to 17.002.0
2515.00 to 23.008.00 to 21.002.0
[ ! ] 2. For EN 1.4301 Equiv., there must be a 2 mm or greater wall thickness [(D - P)/2 ≥ 2].
■S Tolerance H7
Part NumberP
0.01 mm Increments		S (P > S)
0.01 mm Increments		L
1 mm Increments		B
1 mm Increments		R
TypeD
(JIS−SKS93 Hardened)
KJBHD

(JIS−SKS93 Hardened, Electroless Nickel Plating)
KJBHDM

(EN 1.4301 Equiv.)
KJBHDS		8 4.00 to 6.003.00 to 5.003 to 25

L ≤ P × 3
No R for L3 and L4		5 to 25

When S ≤ 3.59
B ≤ S × 2.5
When S ≥ 3.60
B ≤ S × 3		1.0
10 4.00 to 8.003.00 to 7.002.0
12 5.00 to 10.003.00 to 9.002.0
16 8.00 to 14.004.00 to 13.002.0
2010.00 to 18.006.00 to 17.002.0
2515.00 to 23.008.00 to 21.002.0

Alterations

Part Number—P—S—L—B—(FC·PKC ... etc.)
KJBD12—P8.00—S4.00—L10—B5—FC
AlterationsCodeSpec.
Groove (for Adhesive Reservoir)

FCAdds an adhesive reservoir groove.

" ! "D ≥ P+3: Applicable only when a wall thickness is 1.5 mm or more.
　

[ ! ] Applicable when L + B ≥ 10 for Straight Type,
L + B ≥ 15 for Shouldered Type

[NG] Combination with alteration NC is not available
Groove (for Retaining)

NCAdds groove for retaining.

" ! "D ≥ P+3: Applicable only when a wall thickness is 1.5 mm or more.
　

[ ! ] Applicable when L + B ≥ 10 for Straight Type,
L + B ≥ 15 for Shouldered Type

[NG] Combination with alteration FC is not available
Radius R C Chamfered
RNAdds C Chamfering (0.5 or less) to R.
Radius R Square Corner
CRNReplaces R with square corner.
[ ! ] Edge may be burred.
[NG] Combination with TKC and LKC is not available
AlterationsCodeSpec.
Additional Surface Treatment
(Black Oxide)		STCAdds black oxide surface treatment.

[ ! ] Applicable only to material JIS−SKS93 (except electroless nickel plating).
　

P Dimension Tolerance
PKCChanges P dimension tolerance to H7.
L + B Dimension Tolerance
LKCChanges L + B dimension tolerance to 0 -0.05
[NG] Combination with TKC and CRN is not available
[ ! ] Tolerance is not for L dimension only.
Flats Machining
HTAdds a flat on bushing.

Part Number:  

    3D preview is not available, because the part number has not yet been determined.

  • In order to open the 3D preview, the part number must be fixed.
Loading...

Plug-in is required for 3D Preview

CAD Download

Data to be displayed
30
45
60
  1. 1
Part Number
KJBD8-P[4-6/0.01]-S[3-5/0.01]-L[3-25/1]-B[5-25/1]
KJBD10-P[4-8/0.01]-S[3-7/0.01]-L[3-25/1]-B[5-25/1]
KJBD12-P[5-10/0.01]-S[3-9/0.01]-L[3-25/1]-B[5-25/1]
KJBD16-P[8-14/0.01]-S[4-13/0.01]-L[3-25/1]-B[5-25/1]
KJBD20-P[10-18/0.01]-S[6-17/0.01]-L[3-25/1]-B[5-25/1]
KJBD25-P[15-23/0.01]-S[8-21/0.01]-L[3-25/1]-B[5-25/1]
KJBDM8-P[4-6/0.01]-S[3-5/0.01]-L[3-25/1]-B[5-25/1]
KJBDM10-P[4-8/0.01]-S[3-7/0.01]-L[3-25/1]-B[5-25/1]
KJBDM12-P[5-10/0.01]-S[3-9/0.01]-L[3-25/1]-B[5-25/1]
KJBDM16-P[8-14/0.01]-S[4-13/0.01]-L[3-25/1]-B[5-25/1]
KJBDM20-P[10-18/0.01]-S[6-17/0.01]-L[3-25/1]-B[5-25/1]
KJBDM25-P[15-23/0.01]-S[8-21/0.01]-L[3-25/1]-B[5-25/1]
KJBDS8-P[4-6/0.01]-S[3-5/0.01]-L[3-25/1]-B[5-25/1]
KJBDS10-P[4-8/0.01]-S[3-7/0.01]-L[3-25/1]-B[5-25/1]
KJBDS12-P[5-10/0.01]-S[3-9/0.01]-L[3-25/1]-B[5-25/1]
KJBDS16-P[8-14/0.01]-S[4-13/0.01]-L[3-25/1]-B[5-25/1]
KJBDS20-P[10-18/0.01]-S[6-17/0.01]-L[3-25/1]-B[5-25/1]
KJBDS25-P[15-23/0.01]-S[8-21/0.01]-L[3-25/1]-B[5-25/1]
KJBDT8-P[4-6/0.01]-S[3-5/0.01]-L[3-25/1]-B[5-25/1]-T[2,​3,​5]
KJBDT10-P[4-8/0.01]-S[3-7/0.01]-L[3-25/1]-B[5-25/1]-T[2,​3,​5]
KJBDT12-P[5-10/0.01]-S[3-9/0.01]-L[3-25/1]-B[5-25/1]-T[2,​3,​5]
KJBDT16-P[8-14/0.01]-S[4-13/0.01]-L[3-25/1]-B[5-25/1]-T[2,​3,​5]
KJBDT20-P[10-18/0.01]-S[6-17/0.01]-L[3-25/1]-B[5-25/1]-T[2,​3,​5]
KJBDT25-P[15-23/0.01]-S[8-21/0.01]-L[3-25/1]-B[5-25/1]-T[2,​3,​5]
KJBFD8-P[4-6/0.01]-S[3-5/0.01]-L[3-25/1]-B[5-25/1]-T[2-5.5/0.1]-H[10-14/1]
KJBFD10-P[4-8/0.01]-S[3-7/0.01]-L[3-25/1]-B[5-25/1]-T[2-5.5/0.1]-H[12-17/1]
KJBFD12-P[5-10/0.01]-S[3-9/0.01]-L[3-25/1]-B[5-25/1]-T[2-5.5/0.1]-H[14-20/1]
KJBFD16-P[8-14/0.01]-S[4-13/0.01]-L[3-25/1]-B[5-25/1]-T[2-5.5/0.1]-H[18-26/1]
KJBFD20-P[10-18/0.01]-S[6-17/0.01]-L[3-25/1]-B[5-25/1]-T[2-5.5/0.1]-H[22-37/1]
KJBFD25-P[15-23/0.01]-S[8-21/0.01]-L[3-25/1]-B[5-25/1]-T[2-5.5/0.1]-H[27-40/1]
KJBFHD8-P[4-6/0.01]-S[3-5/0.01]-L[3-25/1]-B[5-25/1]-T[2-5.5/0.1]-H[10-14/1]
KJBFHD10-P[4-8/0.01]-S[3-7/0.01]-L[3-25/1]-B[5-25/1]-T[2-5.5/0.1]-H[12-17/1]
KJBFHD12-P[5-10/0.01]-S[3-9/0.01]-L[3-25/1]-B[5-25/1]-T[2-5.5/0.1]-H[14-20/1]
KJBFHD16-P[8-14/0.01]-S[4-13/0.01]-L[3-25/1]-B[5-25/1]-T[2-5.5/0.1]-H[18-26/1]
KJBFHD20-P[10-18/0.01]-S[6-17/0.01]-L[3-25/1]-B[5-25/1]-T[2-5.5/0.1]-H[22-37/1]
KJBFHD25-P[15-23/0.01]-S[8-21/0.01]-L[3-25/1]-B[5-25/1]-T[2-5.5/0.1]-H[27-40/1]
KJBHD8-P[4-6/0.01]-S[3-5/0.01]-L[3-25/1]-B[5-25/1]
KJBHD10-P[4-8/0.01]-S[3-7/0.01]-L[3-25/1]-B[5-25/1]
KJBHD12-P[5-10/0.01]-S[3-9/0.01]-L[3-25/1]-B[5-25/1]
KJBHD16-P[8-14/0.01]-S[4-13/0.01]-L[3-25/1]-B[5-25/1]
KJBHD20-P[10-18/0.01]-S[6-17/0.01]-L[3-25/1]-B[5-25/1]
KJBHD25-P[15-23/0.01]-S[8-21/0.01]-L[3-25/1]-B[5-25/1]
KJBHDM8-P[4-6/0.01]-S[3-5/0.01]-L[3-25/1]-B[5-25/1]
KJBHDM10-P[4-8/0.01]-S[3-7/0.01]-L[3-25/1]-B[5-25/1]
KJBHDM12-P[5-10/0.01]-S[3-9/0.01]-L[3-25/1]-B[5-25/1]
KJBHDM16-P[8-14/0.01]-S[4-13/0.01]-L[3-25/1]-B[5-25/1]
KJBHDM20-P[10-18/0.01]-S[6-17/0.01]-L[3-25/1]-B[5-25/1]
KJBHDM25-P[15-23/0.01]-S[8-21/0.01]-L[3-25/1]-B[5-25/1]
KJBHDS8-P[4-6/0.01]-S[3-5/0.01]-L[3-25/1]-B[5-25/1]
KJBHDS10-P[4-8/0.01]-S[3-7/0.01]-L[3-25/1]-B[5-25/1]
KJBHDS12-P[5-10/0.01]-S[3-9/0.01]-L[3-25/1]-B[5-25/1]
KJBHDS16-P[8-14/0.01]-S[4-13/0.01]-L[3-25/1]-B[5-25/1]
KJBHDS20-P[10-18/0.01]-S[6-17/0.01]-L[3-25/1]-B[5-25/1]
KJBHDS25-P[15-23/0.01]-S[8-21/0.01]-L[3-25/1]-B[5-25/1]
KJBHDT8-P[4-6/0.01]-S[3-5/0.01]-L[3-25/1]-B[5-25/1]-T[2,​3,​5]
KJBHDT10-P[4-8/0.01]-S[3-7/0.01]-L[3-25/1]-B[5-25/1]-T[2,​3,​5]
KJBHDT12-P[5-10/0.01]-S[3-9/0.01]-L[3-25/1]-B[5-25/1]-T[2,​3,​5]
KJBHDT16-P[8-14/0.01]-S[4-13/0.01]-L[3-25/1]-B[5-25/1]-T[2,​3,​5]
KJBHDT20-P[10-18/0.01]-S[6-17/0.01]-L[3-25/1]-B[5-25/1]-T[2,​3,​5]
KJBHDT25-P[15-23/0.01]-S[8-21/0.01]-L[3-25/1]-B[5-25/1]-T[2,​3,​5]
Part NumberMinimum order quantityVolume Discount
Standard
Shipping Days
?
RoHSBasic Shape Outer Diameter Tolerance Material Surface Treatment Hardness Material Hardness Details Type I.D. Tolerance Bushing Dia. D
(Ø) 		I.D. P
(Ø) 		Shoulder Dia. H
(Ø) 		B
(mm) 		L
(mm) 		S
(mm) 		Shoulder Thickness T
(mm)
1 9 Days 10StraightStandardSteelNot ProvidedProvidedJIS-SKS9350-60HRCStraight Standard Type+0.03/+0.0184 ～ 6-5 ～ 253 ～ 253 ～ 5-
1 9 Days 10StraightStandardSteelNot ProvidedProvidedJIS-SKS9350-60HRCStraight Standard Type+0.03/+0.01104 ～ 8-5 ～ 253 ～ 253 ～ 7-
1 9 Days 10StraightStandardSteelNot ProvidedProvidedJIS-SKS9350-60HRCStraight Standard Type+0.03/+0.01125 ～ 10-5 ～ 253 ～ 253 ～ 9-
1 9 Days 10StraightStandardSteelNot ProvidedProvidedJIS-SKS9350-60HRCStraight Standard Type+0.03/+0.01168 ～ 14-5 ～ 253 ～ 254 ～ 13-
1 9 Days 10StraightStandardSteelNot ProvidedProvidedJIS-SKS9350-60HRCStraight Standard Type+0.03/+0.012010 ～ 18-5 ～ 253 ～ 256 ～ 17-
1 9 Days 10StraightStandardSteelNot ProvidedProvidedJIS-SKS9350-60HRCStraight Standard Type+0.03/+0.012515 ～ 23-5 ～ 253 ～ 258 ～ 21-
1 9 Days 10StraightStandardSteelElectroless Nickel PlatingProvidedJIS-SKS9350-60HRCStraight Standard Type+0.03/+0.0184 ～ 6-5 ～ 253 ～ 253 ～ 5-
1 9 Days 10StraightStandardSteelElectroless Nickel PlatingProvidedJIS-SKS9350-60HRCStraight Standard Type+0.03/+0.01104 ～ 8-5 ～ 253 ～ 253 ～ 7-
1 9 Days 10StraightStandardSteelElectroless Nickel PlatingProvidedJIS-SKS9350-60HRCStraight Standard Type+0.03/+0.01125 ～ 10-5 ～ 253 ～ 253 ～ 9-
1 9 Days 10StraightStandardSteelElectroless Nickel PlatingProvidedJIS-SKS9350-60HRCStraight Standard Type+0.03/+0.01168 ～ 14-5 ～ 253 ～ 254 ～ 13-
1 9 Days 10StraightStandardSteelElectroless Nickel PlatingProvidedJIS-SKS9350-60HRCStraight Standard Type+0.03/+0.012010 ～ 18-5 ～ 253 ～ 256 ～ 17-
1 9 Days 10StraightStandardSteelElectroless Nickel PlatingProvidedJIS-SKS9350-60HRCStraight Standard Type+0.03/+0.012515 ～ 23-5 ～ 253 ～ 258 ～ 21-
1 9 Days 10StraightStandardStainless SteelNot ProvidedNot ProvidedEN 1.4301 Equiv.-Straight Standard Type+0.03/+0.0184 ～ 6-5 ～ 253 ～ 253 ～ 5-
1 9 Days 10StraightStandardStainless SteelNot ProvidedNot ProvidedEN 1.4301 Equiv.-Straight Standard Type+0.03/+0.01104 ～ 8-5 ～ 253 ～ 253 ～ 7-
1 9 Days 10StraightStandardStainless SteelNot ProvidedNot ProvidedEN 1.4301 Equiv.-Straight Standard Type+0.03/+0.01125 ～ 10-5 ～ 253 ～ 253 ～ 9-
1 9 Days 10StraightStandardStainless SteelNot ProvidedNot ProvidedEN 1.4301 Equiv.-Straight Standard Type+0.03/+0.01168 ～ 14-5 ～ 253 ～ 254 ～ 13-
1 9 Days 10StraightStandardStainless SteelNot ProvidedNot ProvidedEN 1.4301 Equiv.-Straight Standard Type+0.03/+0.012010 ～ 18-5 ～ 253 ～ 256 ～ 17-
1 9 Days 10StraightStandardStainless SteelNot ProvidedNot ProvidedEN 1.4301 Equiv.-Straight Standard Type+0.03/+0.012515 ～ 23-5 ～ 253 ～ 258 ～ 21-
1 9 Days 10ShoulderedStandardSteelNot ProvidedProvidedJIS-SKS9350-60HRCT Dimension Selectable Standard Type With Shoulder+0.03/+0.0184 ～ 6125 ～ 253 ～ 253 ～ 52 ～ 5
1 9 Days 10ShoulderedStandardSteelNot ProvidedProvidedJIS-SKS9350-60HRCT Dimension Selectable Standard Type With Shoulder+0.03/+0.01104 ～ 8145 ～ 253 ～ 253 ～ 72 ～ 5
1 9 Days 10ShoulderedStandardSteelNot ProvidedProvidedJIS-SKS9350-60HRCT Dimension Selectable Standard Type With Shoulder+0.03/+0.01125 ～ 10165 ～ 253 ～ 253 ～ 92 ～ 5
1 9 Days 10ShoulderedStandardSteelNot ProvidedProvidedJIS-SKS9350-60HRCT Dimension Selectable Standard Type With Shoulder+0.03/+0.01168 ～ 14205 ～ 253 ～ 254 ～ 132 ～ 5
1 9 Days 10ShoulderedStandardSteelNot ProvidedProvidedJIS-SKS9350-60HRCT Dimension Selectable Standard Type With Shoulder+0.03/+0.012010 ～ 18245 ～ 253 ～ 256 ～ 172 ～ 5
1 9 Days 10ShoulderedStandardSteelNot ProvidedProvidedJIS-SKS9350-60HRCT Dimension Selectable Standard Type With Shoulder+0.03/+0.012515 ～ 23295 ～ 253 ～ 258 ～ 212 ～ 5
1 9 Days 10ShoulderedStandardSteelNot ProvidedProvidedJIS-SKS9350-60HRCT, H Configurable Standard Type With Shoulder+0.03/+0.0184 ～ 610 ～ 145 ～ 253 ～ 253 ～ 52 ～ 5.5
1 9 Days 10ShoulderedStandardSteelNot ProvidedProvidedJIS-SKS9350-60HRCT, H Configurable Standard Type With Shoulder+0.03/+0.01104 ～ 812 ～ 175 ～ 253 ～ 253 ～ 72 ～ 5.5
1 9 Days 10ShoulderedStandardSteelNot ProvidedProvidedJIS-SKS9350-60HRCT, H Configurable Standard Type With Shoulder+0.03/+0.01125 ～ 1014 ～ 205 ～ 253 ～ 253 ～ 92 ～ 5.5
1 9 Days 10ShoulderedStandardSteelNot ProvidedProvidedJIS-SKS9350-60HRCT, H Configurable Standard Type With Shoulder+0.03/+0.01168 ～ 1418 ～ 265 ～ 253 ～ 254 ～ 132 ～ 5.5
1 9 Days 10ShoulderedStandardSteelNot ProvidedProvidedJIS-SKS9350-60HRCT, H Configurable Standard Type With Shoulder+0.03/+0.012010 ～ 1822 ～ 375 ～ 253 ～ 256 ～ 172 ～ 5.5
1 9 Days 10ShoulderedStandardSteelNot ProvidedProvidedJIS-SKS9350-60HRCT, H Configurable Standard Type With Shoulder+0.03/+0.012515 ～ 2327 ～ 405 ～ 253 ～ 258 ～ 212 ～ 5.5
1 9 Days 10ShoulderedStandardSteelNot ProvidedProvidedJIS-SKS9350-60HRCT, H Configurable Standard Type With ShoulderH784 ～ 610 ～ 145 ～ 253 ～ 253 ～ 52 ～ 5.5
1 9 Days 10ShoulderedStandardSteelNot ProvidedProvidedJIS-SKS9350-60HRCT, H Configurable Standard Type With ShoulderH7104 ～ 812 ～ 175 ～ 253 ～ 253 ～ 72 ～ 5.5
1 9 Days 10ShoulderedStandardSteelNot ProvidedProvidedJIS-SKS9350-60HRCT, H Configurable Standard Type With ShoulderH7125 ～ 1014 ～ 205 ～ 253 ～ 253 ～ 92 ～ 5.5
1 9 Days 10ShoulderedStandardSteelNot ProvidedProvidedJIS-SKS9350-60HRCT, H Configurable Standard Type With ShoulderH7168 ～ 1418 ～ 265 ～ 253 ～ 254 ～ 132 ～ 5.5
1 9 Days 10ShoulderedStandardSteelNot ProvidedProvidedJIS-SKS9350-60HRCT, H Configurable Standard Type With ShoulderH72010 ～ 1822 ～ 375 ～ 253 ～ 256 ～ 172 ～ 5.5
1 9 Days 10ShoulderedStandardSteelNot ProvidedProvidedJIS-SKS9350-60HRCT, H Configurable Standard Type With ShoulderH72515 ～ 2327 ～ 405 ～ 253 ～ 258 ～ 212 ～ 5.5
1 9 Days 10StraightStandardSteelNot ProvidedProvidedJIS-SKS9350-60HRCStraight Standard TypeH784 ～ 6-5 ～ 253 ～ 253 ～ 5-
1 9 Days 10StraightStandardSteelNot ProvidedProvidedJIS-SKS9350-60HRCStraight Standard TypeH7104 ～ 8-5 ～ 253 ～ 253 ～ 7-
1 9 Days 10StraightStandardSteelNot ProvidedProvidedJIS-SKS9350-60HRCStraight Standard TypeH7125 ～ 10-5 ～ 253 ～ 253 ～ 9-
1 9 Days 10StraightStandardSteelNot ProvidedProvidedJIS-SKS9350-60HRCStraight Standard TypeH7168 ～ 14-5 ～ 253 ～ 254 ～ 13-
1 9 Days 10StraightStandardSteelNot ProvidedProvidedJIS-SKS9350-60HRCStraight Standard TypeH72010 ～ 18-5 ～ 253 ～ 256 ～ 17-
1 9 Days 10StraightStandardSteelNot ProvidedProvidedJIS-SKS9350-60HRCStraight Standard TypeH72515 ～ 23-5 ～ 253 ～ 258 ～ 21-
1 7 Days 10StraightStandardSteelElectroless Nickel PlatingProvidedJIS-SKS93 Equiv.50-60HRCStraight Standard TypeH784 ～ 6-5 ～ 253 ～ 253 ～ 5-
1 7 Days 10StraightStandardSteelElectroless Nickel PlatingProvidedJIS-SKS93 Equiv.50-60HRCStraight Standard TypeH7104 ～ 8-5 ～ 253 ～ 253 ～ 7-
1 7 Days 10StraightStandardSteelElectroless Nickel PlatingProvidedJIS-SKS93 Equiv.50-60HRCStraight Standard TypeH7125 ～ 10-5 ～ 253 ～ 253 ～ 9-
1 7 Days 10StraightStandardSteelElectroless Nickel PlatingProvidedJIS-SKS93 Equiv.50-60HRCStraight Standard TypeH7168 ～ 14-5 ～ 253 ～ 254 ～ 13-
1 7 Days 10StraightStandardSteelElectroless Nickel PlatingProvidedJIS-SKS93 Equiv.50-60HRCStraight Standard TypeH72010 ～ 18-5 ～ 253 ～ 256 ～ 17-
1 7 Days 10StraightStandardSteelElectroless Nickel PlatingProvidedJIS-SKS93 Equiv.50-60HRCStraight Standard TypeH72515 ～ 23-5 ～ 253 ～ 258 ～ 21-
1 9 Days 10StraightStandardStainless SteelNot ProvidedNot ProvidedEN 1.4301 Equiv.-Straight Standard TypeH784 ～ 6-5 ～ 253 ～ 253 ～ 5-
1 9 Days 10StraightStandardStainless SteelNot ProvidedNot ProvidedEN 1.4301 Equiv.-Straight Standard TypeH7104 ～ 8-5 ～ 253 ～ 253 ～ 7-
1 9 Days 10StraightStandardStainless SteelNot ProvidedNot ProvidedEN 1.4301 Equiv.-Straight Standard TypeH7125 ～ 10-5 ～ 253 ～ 253 ～ 9-
1 9 Days 10StraightStandardStainless SteelNot ProvidedNot ProvidedEN 1.4301 Equiv.-Straight Standard TypeH7168 ～ 14-5 ～ 253 ～ 254 ～ 13-
1 9 Days 10StraightStandardStainless SteelNot ProvidedNot ProvidedEN 1.4301 Equiv.-Straight Standard TypeH72010 ～ 18-5 ～ 253 ～ 256 ～ 17-
1 9 Days 10StraightStandardStainless SteelNot ProvidedNot ProvidedEN 1.4301 Equiv.-Straight Standard TypeH72515 ～ 23-5 ～ 253 ～ 258 ～ 21-
1 9 Days 10ShoulderedStandardSteelNot ProvidedProvidedJIS-SKS9350-60HRCT Dimension Selectable Standard Type With ShoulderH784 ～ 6125 ～ 253 ～ 253 ～ 52 ～ 5
1 9 Days 10ShoulderedStandardSteelNot ProvidedProvidedJIS-SKS9350-60HRCT Dimension Selectable Standard Type With ShoulderH7104 ～ 8145 ～ 253 ～ 253 ～ 72 ～ 5
1 9 Days 10ShoulderedStandardSteelNot ProvidedProvidedJIS-SKS9350-60HRCT Dimension Selectable Standard Type With ShoulderH7125 ～ 10165 ～ 253 ～ 253 ～ 92 ～ 5
1 9 Days 10ShoulderedStandardSteelNot ProvidedProvidedJIS-SKS9350-60HRCT Dimension Selectable Standard Type With ShoulderH7168 ～ 14205 ～ 253 ～ 254 ～ 132 ～ 5
1 9 Days 10ShoulderedStandardSteelNot ProvidedProvidedJIS-SKS9350-60HRCT Dimension Selectable Standard Type With ShoulderH72010 ～ 18245 ～ 253 ～ 256 ～ 172 ～ 5
1 9 Days 10ShoulderedStandardSteelNot ProvidedProvidedJIS-SKS9350-60HRCT Dimension Selectable Standard Type With ShoulderH72515 ～ 23295 ～ 253 ～ 258 ～ 212 ～ 5

Loading...

  1. 1
 

Basic information

Hole Selectable 1-Step Hole Shape Circular Shape With or w/o Tap Not Tapped

Configure

Clear all

60Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.
The part number is completed.

Basic Attributes

  • Basic Shape

    • Straight
    • Shouldered

    Clear

  • Material

    • Steel
    • Stainless Steel

    Clear

  • Surface Treatment

    • Not Provided
    • Electroless Nickel Plating

    Clear

  • Hardness

    • Provided
    • Not Provided

    Clear

  • Material

    • EN 1.4301 Equiv.
    • JIS-SKS93
    • JIS-SKS93 Equiv.

    Clear

  • Hardness Details

    • 50-60HRC

    Clear

  • Type

    • Straight Standard Type
    • T Dimension Selectable Press Fit Type With Shoulder
    • T Dimension Selectable Standard Type With Shoulder
    • T, H Configurable Press Fit Type With Shoulder
    • T, H Configurable Standard Type With Shoulder

    Clear

  • I.D. Tolerance

    • +0.03/+0.01
    • H7

    Clear

  • Bushing Dia. D(Ø)

    • 8
    • 10
    • 12
    • 16
    • 20
    • 25

    Clear

  • I.D. P(Ø)

     [4-23/0.01Ø Unit(s)]

    Clear

  • Shoulder Dia. H(Ø)

    • 12
    • 14
    • 16
    • 20
    • 24
    • 29

     [10-40/1Ø Unit(s)]

    Clear

  • B(mm)

     [5-25/1mm Unit(s)]

    Clear

  • L(mm)

     [3-25/1mm Unit(s)]

    Clear

  • S(mm)

     [3-21/0.01mm Unit(s)]

    Clear

  • Shoulder Thickness T(mm)

    • 2
    • 3
    • 5

     [2-5.5/0.1mm Unit(s)]

    Clear

  • Type

    • KJBD
    • KJBDM
    • KJBDS
    • KJBDT
    • KJBFD
    • KJBFHD
    • KJBHD
    • KJBHDM
    • KJBHDS
    • KJBHDT
    • KJBPDTS
    • KJBPFHD
    • KJBPHDT

    Clear

  • Outer Diameter Tolerance

    • Standard
    • Press Fit

    Clear

  • Filter by CAD data type

    • 2D
    • 3D

    Clear

Filter by standard shipping days

    • All
    • 7 Days or Less
    • 9 Days or Less

    Reset

Optional Attributes

Complementary Products

Tech Support

Technical Support
Tel：+49 69 668173-0 / FAX：+49 69 668173-360
Technical Inquiry

Payment Method

  • Payment on account
  • Pre Payment
  • PayPal

On-Demand Manufacturing

Change View

Certificates

  • ISO-9001
  • ISO-14001
  • AEO Certification
  • RoHS
  • REACH

MISUMI worldwide

Social Media

Legal notice

Copyright © MISUMI Corporation All Rights Reserved.