Parallel Configuration / Different Diameter / Selectable Pitch
Brace clamp used to fix 2 tripod braces side by side. [Material] EN 1.0038 Equiv.
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
- Drawing / Specifications
- 3D Preview 3D preview is available after complete configuration
- Part Numbers
- Catalog
D=10·12
D=15 to 35
Stepped Section
Details
Details
Standard
Thin
[!] Unless otherwise specified, the dimension tolerance conforms to JIS B 0405 Class m. However, B, C and C1 dimensions and slit width 2 mm tolerance are excluded.
| Type | [M] Material | [S] Surface Treatment | [A] Accessory | |
| Standard | Thin | |||
| KKQ | KKQT | EN 1.0038 Equiv. | Black Oxide | Hex Socket Head Cap Screws |
| D | Included Screw (Thin Type has 1 screw on each side.) | |
| Equal Dia., Parallel | Unequal Dia., Parallel | |
| 8 | M5-12, 2 pcs. | — |
| 10 | M5-15, 2 pcs. | M5-12/M5-10, 1 pc. each |
| 12 | M5-15, 2 pcs. | M5-15, 2 pcs. |
| 15 | M5-20, 4 pcs. | M5-20/M5-15, 2 pcs. each |
| 20 | M6-25, 4 pcs. | M6-25/M6-20, 2 pcs. each |
| 25 | M6-30, 4 pcs. | M6-30/M6-20, 2 pcs. each |
| 30 | M8-35, 4 pcs. | M8-35/M8-30, 2 pcs. each |
| 35 | M8-40, 4 pcs. | M8-40/M8-35, 2 pcs. each |
Specification Table
| Part Number | - | D1 | - | P |
| KKQT20 | - | 15 | - | 30 |
| Part Number | D1H7 | P Selection | A | B | B1 | C | C1 | E | G | H | K | S | M | d | ||||||||||||
| Type | DH7 | |||||||||||||||||||||||||
| Standard KKQ | Thin KKQT | 10 | +0.015 0 | 8 | +0.015 0 | 15 | 20 | 25 | A = P+E+G | 16 | 12 | 16 | 9 | 15 | 14 | 9 | 8 | — | M5 | 5.5 | ||||||
| 12 | +0.018 0 | 10 | 15 | 20 | 25 | 30 | 16 | 14 | 16 | 9 | 16 | 15 | 10 | 9 | — | |||||||||||
| 15 | 22 | 16 | 22 | 12 | 18 | 15 | 12 | 9 | 11 | |||||||||||||||||
| 20 | +0.021 0 | 15 | +0.018 0 | 20 | 25 | 30 | 40 | 28 | 22 | 28 | 16 | 22 | 19 | 15 | 12 | 14 | M6 | 6.6 | ||||||||
| 25 | 25 | 30 | 40 | 50 | 32 | 22 | 32 | 19 | 25 | 19 | 18 | 12 | 16 | |||||||||||||
| 30 | 20 | +0.021 0 | 30 | 40 | 50 | 75 | 40 | 28 | 40 | 19 | 29 | 23 | 21 | 15 | 20 | M8 | 9 | |||||||||
| 35 | +0.025 0 | 25 | 50 | 75 | 100 | 150 | 45 | 32 | 45 | 22 | 32 | 25 | 24 | 18 | 24 | |||||||||||
| [!] The tolerance and parallelism of DH7 and D1H7 are the values measured before slit machining. [!] Recommended tolerance of mating shafts is g6 and f8. Tightening with a long wrench is recommended. | ||||||||||||||||||||||||||
Part Number:
- In order to open the 3D preview, the part number must be fixed.
3D preview is not available, because the part number has not yet been determined.
Loading...
| Part Number | Minimum order quantity | Volume Discount | RoHS | Post Dia. (mm) | Thickness Type | D1 | P | |
|---|---|---|---|---|---|---|---|---|
| 1 | 7 Days | 10 | 10 | Standard | 8 | 15 ～ 25 | ||
| 1 | 7 Days | 10 | 12 | Standard | 10 | 15 ～ 30 | ||
| 1 | 7 Days | 10 | 15 | Standard | 10 | 15 ～ 30 | ||
| 1 | 7 Days | 10 | 20 | Standard | 15 | 20 ～ 40 | ||
| 1 | 7 Days | 10 | 25 | Standard | 15 | 25 ～ 50 | ||
| 1 | 7 Days | 10 | 30 | Standard | 20 | 30 ～ 75 | ||
| 1 | 7 Days | 10 | 35 | Standard | 25 | 50 ～ 150 | ||
| 1 | 7 Days | 10 | 10 | Thin | 8 | 15 ～ 25 | ||
| 1 | 7 Days | 10 | 12 | Thin | 10 | 15 ～ 30 | ||
| 1 | 7 Days | 10 | 15 | Thin | 10 | 15 ～ 30 | ||
| 1 | 7 Days | 10 | 20 | Thin | 15 | 20 ～ 40 | ||
| 1 | 7 Days | 10 | 25 | Thin | 15 | 25 ～ 50 | ||
| 1 | 7 Days | 10 | 30 | Thin | 20 | 30 ～ 75 | ||
| 1 | 7 Days | 10 | 35 | Thin | 25 | 50 ～ 150 |
Loading...
Basic information
| Type | Parallel | Post Shape | Square | Material | Steel |
|---|---|---|---|---|---|
| Surface Treatment | Black Oxide | Combined-Post Dia. | Unequal Dia. |
Configure
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Complementary Products
-
Round tubes, round bars / stainless steel, steel / black oxided, nickel-plated, hardened / groove
MISUMI Shipping Days: 7 Days
-
Round tubes, round bars / stainless steel / scale
MISUMI Standard Price : 15.44 € Shipping Days: Same day
MISUMI Unit еxample related to this product
Tech Support
- Technical Support
- Tel：+49 69 668173-0 / FAX：+49 69 668173-360
- Technical Inquiry
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.