• Brands
  • Company
  • Contact
EN / UK
Type Code Seach | *NOT READY*
#CODE
Keyword suggestions
Part number suggestions
Discontinued Products

Spacer Washers / Flange / Steel, Stainless Steel / Treatment Selectable / 45-55 HRC

Spacer Washers / Flange / Steel, Stainless Steel / Treatment Selectable / 45-55 HRC

Click on this image to zoom in.

Click on this image to zoom in.

MISUMI

MISUMI

  • Order quantities extended (D-JIT)

Data sheet

Unit еxample related to this product
Z-axis elevating mechanism
Search for оther еxamples

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Standard Grade
Precision Grade

[ ! ] Circumference chamfering C0.5 or less
Part Number[M] Material[S] Surface Treatment[ H ]Hardness
Standard GradePrecision Grade
FTCSS—Steel for general structure——
FTCCFTCMCEN 1.1191 Equiv.——
FTCBFTCMBBlack Oxide
FTCMFTCMMElectroless Nickel Plating
FTCRFTCMRLow Temp. Black Chrome Plating
FTCAA—2000 Series Aluminum AlloyClear Anodize—
FTCAB—Black Anodize
FTCBBB—EN CW614N Equiv.——
FTCSU—EN 1.4301 Equiv.——
FTCSUR—Low Temp. Black Chrome Plating
FTCSK—EN 1.2510 Equiv.—55HRC or more
FTCSKBBlack Oxide
FTCSKMElectroless Nickel Plating
FTCSUS—EN 1.4401 Equiv.——
FTCSFTCMSEN 1.4125 Equiv.—45 to 50HRC
[ ! ] Stainless steel hardened type (FTCS, FTCMS) may be discolored by hardening.
[ ! ] I.D. part of low temp. black chrome plating may have a thinner coating or partially untreated.

Specification Table

Part Number—D—H—V—T—L
FTCMS—D25—H30—V8.0—T2.0—L5.0
■Standard Grade
Part NumberDHV
0.5 mm Increments
(V Dimension 3 or More)		T
0.1 mm Increments		L
0.1 mm Increments
Standard Grade
FTCSS
FTCC
FTCB
FTCM
FTCR
FTCAA
FTCAB
FTCBBB
FTCSU
FTCSUR
FTCSK
FTCSKB
FTCSKM
FTCSUS
FTCS		5.0 to 9.0
(0.5 mm Increments)		7.0 to 12.0
(0.5 mm Increments)		(Selection)
2
2.6

(0.5 mm Increments)
3.0 to 58.0		1.0 to 8.02.0 to 10.0
9.5 to 20.0
(0.5 mm Increments)		11.5 to 25.0
(0.5 mm Increments)
21 to 30
(1 mm increments)		23 to 40
(1 mm increments)
31 to 40
(1 mm increments)		33 to 50
(1 mm increments)
41 to 50
(1 mm increments)		43 to 60
(1 mm increments)
51 to 60
(1 mm increments)		53 to 70
(1 mm increments)
 [ ! ] Machining conditions [ ! ] T ≤ L−1 [ ! ] Machining conditions of material SKS3 equivalent (FTCSK, FTCSKB, FTCSKM) [ ! ] 2 ≤ T ≤ L−2 
 DHV DHV          
 For 5 to 20D+2 ≤ H ≤ D × 1.5V ≤ D−2    For 5 to 10D+2 ≤ H ≤ D × 1.4V ≤ D−2          
 For 21 to 40D+2 ≤ H ≤ D × 1.4V ≤ D−4For 10.5 to 30V ≤ D−4          
 For 41 to 60D+2 ≤ H ≤ D × 1.2V ≤ D−6  For 31 to 60D+2 ≤ H ≤ D × 1.2V ≤ D−6          
■Precision Grade
Part NumberDHV
0.5 mm Increments
(V Dimension 3 or More)		T
0.1 mm Increments		L
0.1 mm Increments
Precision Grade
FTCMC
FTCMB
FTCMM
FTCMR
FTCMS		5.0 to 9.0
(0.5 mm Increments)		7.0 to 12.0
(0.5 mm Increments)		(Selection)
2
2.6

(0.5 mm Increments)
3.0 to 58.0		1.0 to 8.02.0 to 10.0
9.5 to 20.0
(0.5 mm Increments)		11.5 to 25.0
(0.5 mm Increments)
21 to 30
(1 mm increments)		23 to 40
(1 mm increments)
31 to 40
(1 mm increments)		33 to 50
(1 mm increments)
41 to 50
(1 mm increments)		43 to 60
(1 mm increments)
51 to 60
(1 mm increments)		53 to 70
(1 mm increments)
 [ ! ] Machining conditions [ ! ] T ≤ L−1 [ ! ] Machining conditions of material SKS3 equivalent (FTCSK, FTCSKB, FTCSKM) [ ! ] 2 ≤ T ≤ L−2     
 DHV DHV          
 For 5 to 20D+2 ≤ H ≤ D × 1.5V ≤ D−2    For 5 to 10D+2 ≤ H ≤ D × 1.4V ≤ D−2          
 For 21 to 40D+2 ≤ H ≤ D × 1.4V ≤ D−4For 10.5 to 30V ≤ D−4          
 For 41 to 60D+2 ≤ H ≤ D × 1.2V ≤ D−6  For 31 to 60D+2 ≤ H ≤ D × 1.2V ≤ D−6          

Alterations

Part Number—D—H—V—T—L—(TCB·TCC·TCD·TCE·TSA·TSB·TSC·TSD·TSE·VKC·DKC·HKC)
FTCMM—D25—H30—V8.0—T2.0—L5.0—　　　　　　　　　　　　　　　　　　TSC − VKC
[ ! ] When both I.D./O.D. tolerance changes are specified, the concentricity is ø0.02.
[NG] Not applicable to anodized products. [NG] Not applicable to hardened type (products with hardness indications [H]).
AlterationsCodeSpec. AlterationsCodeSpec.
I.D. Tolerance



VKCChanges the I.D. Tolerance to H7.
Ordering Code VKC
Machining conditions
[ ! ]D ≥ 6 V ≥ 3
 
DD－V
6 to 10D－V ≥ 2
10.5 to 20D－V ≥ 3
21 to 30D－V ≥ 6
31 to 40D－V ≥ 8
41 to 50D－V ≥ 10
51 to 60D－V ≥ 12
O.D. Tolerance



DKC
(g6)
HKC
(h7)		Changes the O.D. tolerance to g6
or h7.
Ordering code DKC, HKC
Machining conditions
[ ! ] When D ≥ 43, T ≥ 1.5
[ ! ]D ≥ 6
DD－V
6 to 10D－V ≥ 2
10.5 to 20D－V ≥ 3
21 to 30D－V ≥ 6
31 to 40D－V ≥ 8
41 to 50D－V ≥ 10
51 to 60D－V ≥ 12
[NG] Not applicable to anodized products. [NG] Not applicable to hardened type (products with hardness indications [H]).
AlterationsNegative TolerancePositive ToleranceZero, Negative ToleranceZero, Positive Tolerance
Standard Grade T ToleranceCodeTCBTCCTCDTCE

[ ! ] Applicable to standard grade		Changes shoulder thickness tolerance (T)
T －0.1－0.3

Ordering code TCB　　　		Changes shoulder thickness tolerance (T)
T +0.3+0.1

Ordering code TCC　　　		Changes shoulder thickness tolerance (T)
T 0－0.2

Ordering code TCD　　　		Changes shoulder thickness tolerance (T)
T +0.2 0

Ordering code TCE　　　
 
AlterationsShoulder Thickness ToleranceNegative TolerancePositive ToleranceZero, Negative ToleranceZero, Positive Tolerance
Precision Grade T ToleranceCodeTSATSBTSCTSDTSE

[ ! ] Applicable to precision grade		Changes shoulder thickness tolerance (T)

T ±0.025

Ordering code TSA　　		Changes shoulder thickness tolerance (T)
T －0.01－0.06

Ordering code TSB　　		Changes shoulder thickness tolerance (T)
T +0.06+0.01

Ordering code TSC　　　		Changes shoulder thickness tolerance (T)
T 0－0.05

Ordering code TSD　　　		Changes shoulder thickness tolerance (T)
T +0.05 0

Ordering code TSE　　　

Part Number:  

    3D preview is not available, because the part number has not yet been determined.

  • In order to open the 3D preview, the part number must be fixed.
Loading...

Plug-in is required for 3D Preview

CAD Download

Data to be displayed
30
45
60
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. Next >>
Part Number
FTCAA-D[5-20/0.5]-H[7-25/0.5]-V[2,​2.6]-T[1-8/0.1]-L[2-10/0.1]
FTCAA-D[5-20/0.5]-H[7-25/0.5]-V[3-58/0.5]-T[1-8/0.1]-L[2-10/0.1]
FTCAA-D[5-20/0.5]-H[23-70/1]-V[2,​2.6]-T[1-8/0.1]-L[2-10/0.1]
FTCAA-D[5-20/0.5]-H[23-70/1]-V[3-58/0.5]-T[1-8/0.1]-L[2-10/0.1]
FTCAA-D[21-60/1]-H[7-25/0.5]-V[2,​2.6]-T[1-8/0.1]-L[2-10/0.1]
FTCAA-D[21-60/1]-H[7-25/0.5]-V[3-58/0.5]-T[1-8/0.1]-L[2-10/0.1]
FTCAA-D[21-60/1]-H[23-70/1]-V[2,​2.6]-T[1-8/0.1]-L[2-10/0.1]
FTCAA-D[21-60/1]-H[23-70/1]-V[3-58/0.5]-T[1-8/0.1]-L[2-10/0.1]
FTCAB-D[5-20/0.5]-H[7-25/0.5]-V[2,​2.6]-T[1-8/0.1]-L[2-10/0.1]
FTCAB-D[5-20/0.5]-H[7-25/0.5]-V[3-58/0.5]-T[1-8/0.1]-L[2-10/0.1]
FTCAB-D[5-20/0.5]-H[23-70/1]-V[2,​2.6]-T[1-8/0.1]-L[2-10/0.1]
FTCAB-D[5-20/0.5]-H[23-70/1]-V[3-58/0.5]-T[1-8/0.1]-L[2-10/0.1]
FTCAB-D[21-60/1]-H[7-25/0.5]-V[2,​2.6]-T[1-8/0.1]-L[2-10/0.1]
FTCAB-D[21-60/1]-H[7-25/0.5]-V[3-58/0.5]-T[1-8/0.1]-L[2-10/0.1]
FTCAB-D[21-60/1]-H[23-70/1]-V[2,​2.6]-T[1-8/0.1]-L[2-10/0.1]
FTCAB-D[21-60/1]-H[23-70/1]-V[3-58/0.5]-T[1-8/0.1]-L[2-10/0.1]
FTCB-D5.0-H[7-12/0.5]-V[2,​2.6]-T[1-8/0.1]-L[2-10/0.1]
FTCB-D5.0-H[7-12/0.5]-V[3-58/0.5]-T[1-8/0.1]-L[2-10/0.1]
FTCB-D5.5-H[7-12/0.5]-V[2,​2.6]-T[1-8/0.1]-L[2-10/0.1]
FTCB-D5.5-H[7-12/0.5]-V[3-58/0.5]-T[1-8/0.1]-L[2-10/0.1]
FTCB-D6.0-H[7-12/0.5]-V[2,​2.6]-T[1-8/0.1]-L[2-10/0.1]
FTCB-D6.0-H[7-12/0.5]-V[3-58/0.5]-T[1-8/0.1]-L[2-10/0.1]
FTCB-D6.5-H[7-12/0.5]-V[2,​2.6]-T[1-8/0.1]-L[2-10/0.1]
FTCB-D6.5-H[7-12/0.5]-V[3-58/0.5]-T[1-8/0.1]-L[2-10/0.1]
FTCB-D7.0-H[7-12/0.5]-V[2,​2.6]-T[1-8/0.1]-L[2-10/0.1]
FTCB-D7.0-H[7-12/0.5]-V[3-58/0.5]-T[1-8/0.1]-L[2-10/0.1]
FTCB-D7.5-H[7-12/0.5]-V[2,​2.6]-T[1-8/0.1]-L[2-10/0.1]
FTCB-D7.5-H[7-12/0.5]-V[3-58/0.5]-T[1-8/0.1]-L[2-10/0.1]
FTCB-D8.0-H[7-12/0.5]-V[2,​2.6]-T[1-8/0.1]-L[2-10/0.1]
FTCB-D8.0-H[7-12/0.5]-V[3-58/0.5]-T[1-8/0.1]-L[2-10/0.1]
FTCB-D8.5-H[7-12/0.5]-V[2,​2.6]-T[1-8/0.1]-L[2-10/0.1]
FTCB-D8.5-H[7-12/0.5]-V[3-58/0.5]-T[1-8/0.1]-L[2-10/0.1]
FTCB-D9.0-H[7-12/0.5]-V[2,​2.6]-T[1-8/0.1]-L[2-10/0.1]
FTCB-D9.0-H[7-12/0.5]-V[3-58/0.5]-T[1-8/0.1]-L[2-10/0.1]
FTCB-D9.5-H[11.5-25/0.5]-V[2,​2.6]-T[1-8/0.1]-L[2-10/0.1]
FTCB-D9.5-H[11.5-25/0.5]-V[3-58/0.5]-T[1-8/0.1]-L[2-10/0.1]
FTCB-D10-H[11.5-25/0.5]-V[2,​2.6]-T[1-8/0.1]-L[2-10/0.1]
FTCB-D10-H[11.5-25/0.5]-V[3-58/0.5]-T[1-8/0.1]-L[2-10/0.1]
FTCB-D10.5-H[11.5-25/0.5]-V[2,​2.6]-T[1-8/0.1]-L[2-10/0.1]
FTCB-D10.5-H[11.5-25/0.5]-V[3-58/0.5]-T[1-8/0.1]-L[2-10/0.1]
FTCB-D11-H[11.5-25/0.5]-V[2,​2.6]-T[1-8/0.1]-L[2-10/0.1]
FTCB-D11-H[11.5-25/0.5]-V[3-58/0.5]-T[1-8/0.1]-L[2-10/0.1]
FTCB-D11.5-H[11.5-25/0.5]-V[2,​2.6]-T[1-8/0.1]-L[2-10/0.1]
FTCB-D11.5-H[11.5-25/0.5]-V[3-58/0.5]-T[1-8/0.1]-L[2-10/0.1]
FTCB-D12-H[11.5-25/0.5]-V[2,​2.6]-T[1-8/0.1]-L[2-10/0.1]
FTCB-D12-H[11.5-25/0.5]-V[3-58/0.5]-T[1-8/0.1]-L[2-10/0.1]
FTCB-D12.5-H[11.5-25/0.5]-V[2,​2.6]-T[1-8/0.1]-L[2-10/0.1]
FTCB-D12.5-H[11.5-25/0.5]-V[3-58/0.5]-T[1-8/0.1]-L[2-10/0.1]
FTCB-D13-H[11.5-25/0.5]-V[2,​2.6]-T[1-8/0.1]-L[2-10/0.1]
FTCB-D13-H[11.5-25/0.5]-V[3-58/0.5]-T[1-8/0.1]-L[2-10/0.1]
FTCB-D13.5-H[11.5-25/0.5]-V[2,​2.6]-T[1-8/0.1]-L[2-10/0.1]
FTCB-D13.5-H[11.5-25/0.5]-V[3-58/0.5]-T[1-8/0.1]-L[2-10/0.1]
FTCB-D14-H[11.5-25/0.5]-V[2,​2.6]-T[1-8/0.1]-L[2-10/0.1]
FTCB-D14-H[11.5-25/0.5]-V[3-58/0.5]-T[1-8/0.1]-L[2-10/0.1]
FTCB-D14.5-H[11.5-25/0.5]-V[2,​2.6]-T[1-8/0.1]-L[2-10/0.1]
FTCB-D14.5-H[11.5-25/0.5]-V[3-58/0.5]-T[1-8/0.1]-L[2-10/0.1]
FTCB-D15-H[11.5-25/0.5]-V[2,​2.6]-T[1-8/0.1]-L[2-10/0.1]
FTCB-D15-H[11.5-25/0.5]-V[3-58/0.5]-T[1-8/0.1]-L[2-10/0.1]
FTCB-D15.5-H[11.5-25/0.5]-V[2,​2.6]-T[1-8/0.1]-L[2-10/0.1]
FTCB-D15.5-H[11.5-25/0.5]-V[3-58/0.5]-T[1-8/0.1]-L[2-10/0.1]
Part Number
Standard Unit Price
Minimum order quantityVolume Discount
Standard
Shipping Days
?
RoHSFeatures, Areas of Application O.D. D
(mm) 		I.D.
(mm) 		Thickness/Length
(mm) 		Material Surface Treatment Thickness/Length Tolerance Hardness
(HRC) 		Precision Shoulder Dia. H
(mm) 		Shoulder Thickness T
(mm)

-

1 9 Days -Non-magnetic5 ～ 202 ～ 2.62 ～ 10[Aluminum] 2000 Series Aluminum AlloyAnodize (Clear)-UnhardenedStandard Grade7 ～ 251 ～ 8

-

1 9 Days -Non-magnetic5 ～ 203 ～ 582 ～ 10[Aluminum] 2000 Series Aluminum AlloyAnodize (Clear)-UnhardenedStandard Grade7 ～ 251 ～ 8

-

1 9 Days -Non-magnetic5 ～ 202 ～ 2.62 ～ 10[Aluminum] 2000 Series Aluminum AlloyAnodize (Clear)-UnhardenedStandard Grade23 ～ 701 ～ 8

-

1 9 Days -Non-magnetic5 ～ 203 ～ 582 ～ 10[Aluminum] 2000 Series Aluminum AlloyAnodize (Clear)-UnhardenedStandard Grade23 ～ 701 ～ 8

-

1 9 Days -Non-magnetic21 ～ 602 ～ 2.62 ～ 10[Aluminum] 2000 Series Aluminum AlloyAnodize (Clear)-UnhardenedStandard Grade7 ～ 251 ～ 8

-

1 9 Days -Non-magnetic21 ～ 603 ～ 582 ～ 10[Aluminum] 2000 Series Aluminum AlloyAnodize (Clear)-UnhardenedStandard Grade7 ～ 251 ～ 8

-

1 9 Days -Non-magnetic21 ～ 602 ～ 2.62 ～ 10[Aluminum] 2000 Series Aluminum AlloyAnodize (Clear)-UnhardenedStandard Grade23 ～ 701 ～ 8

-

1 9 Days -Non-magnetic21 ～ 603 ～ 582 ～ 10[Aluminum] 2000 Series Aluminum AlloyAnodize (Clear)-UnhardenedStandard Grade23 ～ 701 ～ 8

-

1 9 Days -Non-magnetic / Anti-Reflection5 ～ 202 ～ 2.62 ～ 10[Aluminum] 2000 Series Aluminum AlloyAnodize (Black)-UnhardenedStandard Grade7 ～ 251 ～ 8

-

1 9 Days -Non-magnetic / Anti-Reflection5 ～ 203 ～ 582 ～ 10[Aluminum] 2000 Series Aluminum AlloyAnodize (Black)-UnhardenedStandard Grade7 ～ 251 ～ 8

-

1 9 Days -Non-magnetic / Anti-Reflection5 ～ 202 ～ 2.62 ～ 10[Aluminum] 2000 Series Aluminum AlloyAnodize (Black)-UnhardenedStandard Grade23 ～ 701 ～ 8

-

1 9 Days -Non-magnetic / Anti-Reflection5 ～ 203 ～ 582 ～ 10[Aluminum] 2000 Series Aluminum AlloyAnodize (Black)-UnhardenedStandard Grade23 ～ 701 ～ 8

-

1 9 Days -Non-magnetic / Anti-Reflection21 ～ 602 ～ 2.62 ～ 10[Aluminum] 2000 Series Aluminum AlloyAnodize (Black)-UnhardenedStandard Grade7 ～ 251 ～ 8

-

1 9 Days -Non-magnetic / Anti-Reflection21 ～ 603 ～ 582 ～ 10[Aluminum] 2000 Series Aluminum AlloyAnodize (Black)-UnhardenedStandard Grade7 ～ 251 ～ 8

-

1 9 Days -Non-magnetic / Anti-Reflection21 ～ 602 ～ 2.62 ～ 10[Aluminum] 2000 Series Aluminum AlloyAnodize (Black)-UnhardenedStandard Grade23 ～ 701 ～ 8

-

1 9 Days -Non-magnetic / Anti-Reflection21 ～ 603 ～ 582 ～ 10[Aluminum] 2000 Series Aluminum AlloyAnodize (Black)-UnhardenedStandard Grade23 ～ 701 ～ 8

-

1 6 Days 10--2 ～ 2.62 ～ 10[Steel] EN 1.1191 Equiv.Black Oxide0 to -0.3UnhardenedStandard Grade7 ～ 121 ～ 8

-

1 6 Days 10--3 ～ 582 ～ 10[Steel] EN 1.1191 Equiv.Black Oxide0 to -0.3UnhardenedStandard Grade7 ～ 121 ～ 8

-

1 6 Days 10--2 ～ 2.62 ～ 10[Steel] EN 1.1191 Equiv.Black Oxide0 to -0.3UnhardenedStandard Grade7 ～ 121 ～ 8

-

1 6 Days 10--3 ～ 582 ～ 10[Steel] EN 1.1191 Equiv.Black Oxide0 to -0.3UnhardenedStandard Grade7 ～ 121 ～ 8

-

1 6 Days 10--2 ～ 2.62 ～ 10[Steel] EN 1.1191 Equiv.Black Oxide0 to -0.3UnhardenedStandard Grade7 ～ 121 ～ 8

-

1 6 Days 10--3 ～ 582 ～ 10[Steel] EN 1.1191 Equiv.Black Oxide0 to -0.3UnhardenedStandard Grade7 ～ 121 ～ 8

-

1 6 Days 10--2 ～ 2.62 ～ 10[Steel] EN 1.1191 Equiv.Black Oxide0 to -0.3UnhardenedStandard Grade7 ～ 121 ～ 8

-

1 6 Days 10--3 ～ 582 ～ 10[Steel] EN 1.1191 Equiv.Black Oxide0 to -0.3UnhardenedStandard Grade7 ～ 121 ～ 8

-

1 6 Days 10--2 ～ 2.62 ～ 10[Steel] EN 1.1191 Equiv.Black Oxide0 to -0.3UnhardenedStandard Grade7 ～ 121 ～ 8

-

1 6 Days 10--3 ～ 582 ～ 10[Steel] EN 1.1191 Equiv.Black Oxide0 to -0.3UnhardenedStandard Grade7 ～ 121 ～ 8

-

1 6 Days 10--2 ～ 2.62 ～ 10[Steel] EN 1.1191 Equiv.Black Oxide0 to -0.3UnhardenedStandard Grade7 ～ 121 ～ 8

-

1 6 Days 10--3 ～ 582 ～ 10[Steel] EN 1.1191 Equiv.Black Oxide0 to -0.3UnhardenedStandard Grade7 ～ 121 ～ 8

-

1 6 Days 10--2 ～ 2.62 ～ 10[Steel] EN 1.1191 Equiv.Black Oxide0 to -0.3UnhardenedStandard Grade7 ～ 121 ～ 8

-

1 6 Days 10--3 ～ 582 ～ 10[Steel] EN 1.1191 Equiv.Black Oxide0 to -0.3UnhardenedStandard Grade7 ～ 121 ～ 8

-

1 6 Days 10--2 ～ 2.62 ～ 10[Steel] EN 1.1191 Equiv.Black Oxide0 to -0.3UnhardenedStandard Grade7 ～ 121 ～ 8

-

1 6 Days 10--3 ～ 582 ～ 10[Steel] EN 1.1191 Equiv.Black Oxide0 to -0.3UnhardenedStandard Grade7 ～ 121 ～ 8

-

1 6 Days 10--2 ～ 2.62 ～ 10[Steel] EN 1.1191 Equiv.Black Oxide0 to -0.3UnhardenedStandard Grade7 ～ 121 ～ 8

-

1 6 Days 10--3 ～ 582 ～ 10[Steel] EN 1.1191 Equiv.Black Oxide0 to -0.3UnhardenedStandard Grade7 ～ 121 ～ 8

-

1 6 Days 10--2 ～ 2.62 ～ 10[Steel] EN 1.1191 Equiv.Black Oxide0 to -0.3UnhardenedStandard Grade11.5 ～ 251 ～ 8

-

1 6 Days 10--3 ～ 582 ～ 10[Steel] EN 1.1191 Equiv.Black Oxide0 to -0.3UnhardenedStandard Grade11.5 ～ 251 ～ 8

-

1 6 Days 10--2 ～ 2.62 ～ 10[Steel] EN 1.1191 Equiv.Black Oxide0 to -0.3UnhardenedStandard Grade11.5 ～ 251 ～ 8

-

1 6 Days 10--3 ～ 582 ～ 10[Steel] EN 1.1191 Equiv.Black Oxide0 to -0.3UnhardenedStandard Grade11.5 ～ 251 ～ 8

-

1 6 Days 10--2 ～ 2.62 ～ 10[Steel] EN 1.1191 Equiv.Black Oxide0 to -0.3UnhardenedStandard Grade11.5 ～ 251 ～ 8

-

1 6 Days 10--3 ～ 582 ～ 10[Steel] EN 1.1191 Equiv.Black Oxide0 to -0.3UnhardenedStandard Grade11.5 ～ 251 ～ 8

-

1 6 Days 10--2 ～ 2.62 ～ 10[Steel] EN 1.1191 Equiv.Black Oxide0 to -0.3UnhardenedStandard Grade11.5 ～ 251 ～ 8

-

1 6 Days 10--3 ～ 582 ～ 10[Steel] EN 1.1191 Equiv.Black Oxide0 to -0.3UnhardenedStandard Grade11.5 ～ 251 ～ 8

-

1 6 Days 10--2 ～ 2.62 ～ 10[Steel] EN 1.1191 Equiv.Black Oxide0 to -0.3UnhardenedStandard Grade11.5 ～ 251 ～ 8

-

1 6 Days 10--3 ～ 582 ～ 10[Steel] EN 1.1191 Equiv.Black Oxide0 to -0.3UnhardenedStandard Grade11.5 ～ 251 ～ 8

-

1 6 Days 10--2 ～ 2.62 ～ 10[Steel] EN 1.1191 Equiv.Black Oxide0 to -0.3UnhardenedStandard Grade11.5 ～ 251 ～ 8

-

1 6 Days 10--3 ～ 582 ～ 10[Steel] EN 1.1191 Equiv.Black Oxide0 to -0.3UnhardenedStandard Grade11.5 ～ 251 ～ 8

-

1 6 Days 10--2 ～ 2.62 ～ 10[Steel] EN 1.1191 Equiv.Black Oxide0 to -0.3UnhardenedStandard Grade11.5 ～ 251 ～ 8

-

1 6 Days 10--3 ～ 582 ～ 10[Steel] EN 1.1191 Equiv.Black Oxide0 to -0.3UnhardenedStandard Grade11.5 ～ 251 ～ 8

-

1 6 Days 10--2 ～ 2.62 ～ 10[Steel] EN 1.1191 Equiv.Black Oxide0 to -0.3UnhardenedStandard Grade11.5 ～ 251 ～ 8

-

1 6 Days 10--3 ～ 582 ～ 10[Steel] EN 1.1191 Equiv.Black Oxide0 to -0.3UnhardenedStandard Grade11.5 ～ 251 ～ 8

-

1 6 Days 10--2 ～ 2.62 ～ 10[Steel] EN 1.1191 Equiv.Black Oxide0 to -0.3UnhardenedStandard Grade11.5 ～ 251 ～ 8

-

1 6 Days 10--3 ～ 582 ～ 10[Steel] EN 1.1191 Equiv.Black Oxide0 to -0.3UnhardenedStandard Grade11.5 ～ 251 ～ 8

-

1 6 Days 10--2 ～ 2.62 ～ 10[Steel] EN 1.1191 Equiv.Black Oxide0 to -0.3UnhardenedStandard Grade11.5 ～ 251 ～ 8

-

1 6 Days 10--3 ～ 582 ～ 10[Steel] EN 1.1191 Equiv.Black Oxide0 to -0.3UnhardenedStandard Grade11.5 ～ 251 ～ 8

-

1 6 Days 10--2 ～ 2.62 ～ 10[Steel] EN 1.1191 Equiv.Black Oxide0 to -0.3UnhardenedStandard Grade11.5 ～ 251 ～ 8

-

1 6 Days 10--3 ～ 582 ～ 10[Steel] EN 1.1191 Equiv.Black Oxide0 to -0.3UnhardenedStandard Grade11.5 ～ 251 ～ 8

-

1 6 Days 10--2 ～ 2.62 ～ 10[Steel] EN 1.1191 Equiv.Black Oxide0 to -0.3UnhardenedStandard Grade11.5 ～ 251 ～ 8

-

1 6 Days 10--3 ～ 582 ～ 10[Steel] EN 1.1191 Equiv.Black Oxide0 to -0.3UnhardenedStandard Grade11.5 ～ 251 ～ 8

-

1 6 Days 10--2 ～ 2.62 ～ 10[Steel] EN 1.1191 Equiv.Black Oxide0 to -0.3UnhardenedStandard Grade11.5 ～ 251 ～ 8

-

1 6 Days 10--3 ～ 582 ～ 10[Steel] EN 1.1191 Equiv.Black Oxide0 to -0.3UnhardenedStandard Grade11.5 ～ 251 ～ 8

Loading...

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. Next >>
 

Basic information

Shape Shouldered RoHS Information RoHS Requirements Fulfilled Inner Shape Straight
O.D. Tolerance 0 to -0.2 I.D. Tolerance +0.3 to +0.1 Sale Type Sold Separately
Dimension Specifying Method Dimension Configurable Type

Configure

Clear all

288Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.
The part number is completed.

Basic Attributes

  • Features, Areas of Application

    • Corrosion and Chemical Resistance
    • Non-magnetic
    • Heat-Resistant
    • Anti-Reflection

    Clear

  • O.D. D(mm)

     [5-20/0.5mm Unit(s)][21-60/1mm Unit(s)]

    Clear

  • I.D.(mm)

    • 2
    • 2.6

     [3-58/0.5mm Unit(s)]

    Clear

  • Thickness/Length(mm)

     [2-10/0.1mm Unit(s)]

    Clear

  • Material

    • Steel
      • EN 1.0038 Equiv.
      • EN 1.1191 Equiv.
    • Stainless Steel
      • EN 1.4037 Equiv.
      • EN 1.4301 Equiv.
      • EN 1.4401 Equiv.
    • Aluminum
      • 2000 Series Aluminum Alloy
    • Brass (EN CW614N Equiv. )
    • EN 1.2510 Equiv.

    Clear

  • Surface Treatment

    • Not Provided
    • Black Oxide
    • Electroless Nickel Plating
    • LTBC Plating
    • Anodize (Clear)
    • Anodize (Black)

    Clear

  • Thickness/Length Tolerance

    • 0 to -0.3
    • ±0.01

    Clear

  • Hardness(HRC)

    • 45～50HRC
    • 55HRC～
    • Unhardened

    Clear

  • Precision

    • Precision Grade
    • Standard Grade

    Clear

  • Shoulder Dia. H(mm)

     [7-25/0.5mm Unit(s)][23-70/1mm Unit(s)]

    Clear

  • Shoulder Thickness T(mm)

     [1-8/0.1mm Unit(s)]

    Clear

  • Type

    • FTCAA
    • FTCAB
    • FTCB
    • FTCBBB
    • FTCC
    • FTCM
    • FTCMB
    • FTCMC
    • FTCMM
    • FTCMR
    • FTCMS
    • FTCR
    • FTCS
    • FTCSK
    • FTCSKB
    • FTCSKM
    • FTCSS
    • FTCSU
    • FTCSUR
    • FTCSUS

    Clear

  • Filter by CAD data type

    • 2D
    • 3D

    Clear

Filter by standard shipping days

    • All
    • 6 Days or Less
    • 9 Days or Less

    Reset

Optional Attributes

Complementary Products

MISUMI Unit еxample related to this product

Search for оther еxamples

back next

Tech Support

Technical Support
Tel：+49 69 668173-0 / FAX：+49 69 668173-360
Technical Inquiry

Payment Method

  • Payment on account
  • Pre Payment
  • PayPal

On-Demand Manufacturing

Change View

Certificates

  • ISO-9001
  • ISO-14001
  • AEO Certification
  • RoHS
  • REACH

MISUMI worldwide

Social Media

Legal notice

Copyright © MISUMI Corporation All Rights Reserved.