Heat Radiation Gel Sheets
Click on this image to zoom in.
Click on this image to zoom in.
It can be used between the heat source and the heat sink or enclosure.
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
- Drawing / Specifications
- 3D Preview 3D preview is available after complete configuration
- Part Numbers
- More Information
- Catalog
[!] Penetration: JIS K2207
■Accuracy Standards
● Dimensional tolerance of A and B
● Dimensional tolerance of A and B
| 50 mm or less | 51 to 100 | 101 to 200 | 201 or more |
| ±0.5 | ±1.0 | ±1.5 | ±2.0 |
| Type | [M] Material | [H] Hardness |
| Penetration | ||
| HTCH (High Thermal Conduction) | Silicone | 50 |
Specification Table
| Part Number | — | A | — | B |
| HTCH0.5 | — | 300 | — | 190 |
| Part Number | 1 mm Increments | ||
| Type | T | A | B |
| HTCH | 0.5 1 2 | 10 to 350 | 10 to 350 |
■ Features
○ With excellent flexibility and adhesiveness, it can closely adhere to concave or convex surface without trapping air.
○ Excels in electric insulation and flame resistance.
○ With low temperature dependency, it is suitable for use in wide temperature range from -40°C to 150°C.
○ With excellent flexibility and adhesiveness, it can closely adhere to concave or convex surface without trapping air.
○ Excels in electric insulation and flame resistance.
○ With low temperature dependency, it is suitable for use in wide temperature range from -40°C to 150°C.
| Item | Increments | HTCH |
| Thermal Conductivity (Hot Wire Method) | W/m·K | 2.1 |
| Appearance | — | Gray |
| Specific Gravity | — | 2.8 |
| Hardness | Penetration: 1/10 mm | 45 |
| Volume Resistivity | Ω·cm | 7.1 × 1013 |
| Tensile Strength | Mpa | 0.35 |
| Elongation | % | 68 |
| Compression Set | % | 75 |
| Dielectric Breakdown Strength | kV/mm | 12.5 |
| Content of Low-Molecule Siloxane ΣD4 to D10 | ppm | 100 or less |
| Flame Resistance | — | V−0 |
| Normal Temperature Range | °C | −40 to 150 |
| Magnetic Permeability (Magnetic Loss) | ︿ 1 GHz ﹀ | — |
Part Number:
- In order to open the 3D preview, the part number must be fixed.
3D preview is not available, because the part number has not yet been determined.
Loading...
Part Number
|
|---|
| HTCH0.5-[10-350/1]-[10-350/1] |
| HTCH1-[10-350/1]-[10-350/1] |
| HTCH2-[10-350/1]-[10-350/1] |
| Part Number | Minimum order quantity | Volume Discount | RoHS | Thickness T | Length A (mm) | Width B (mm) | |
|---|---|---|---|---|---|---|---|
| 1 | 9 Days | 10 | 0.5 | 10 ～ 350 | 10 ～ 350 | ||
| 1 | 9 Days | 10 | 1 | 10 ～ 350 | 10 ～ 350 | ||
| 1 | 9 Days | 10 | 2 | 10 ～ 350 | 10 ～ 350 |
Loading...
Specifications/Overview
■ How to Use
(1) Peel off only the backing paper from the protection film slowly.
(2) Paste it on the heat-generating part carefully so that air bubbles don't get trapped in. Then peel off the rest of the backing paper.
(3) Paste it carefully so that air bubbles don't get in between the heat radiation gel and heat-discharging part.
[ ! ] This product cannot be used with the heat sink facing downwards due to its weak adhesive strength.
(1) Peel off only the backing paper from the protection film slowly.
(2) Paste it on the heat-generating part carefully so that air bubbles don't get trapped in. Then peel off the rest of the backing paper.
(3) Paste it carefully so that air bubbles don't get in between the heat radiation gel and heat-discharging part.
[ ! ] This product cannot be used with the heat sink facing downwards due to its weak adhesive strength.
Usage example
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Complementary Products
Tech Support
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.