Air Manifold Block -T-Shaped Hole Type-
- Order quantities extended (D-JIT)
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
- Drawing / Specifications
- 3D Preview 3D preview is available after complete configuration
- Part Numbers
- Catalog
● Standard Hole Shape
● Mounting Hole Change
Through Hole (NA)
Tapped Hole (T)
Counterbore Tapped Hole (ZT)
● Side Mounting Hole Change
● Side Mounting Hole Change
Side Counterbore (YZ)
Side Through (YN)
| Mounting Hole Dimension | d | D | h | D1 | d1 | h1 |
| M5 | 5.5 | 9.5 | 5.5 | 8 | 4.2 | 4.5 |
| M8 | 8.5 | 14 | 8.5 | 11 | 6.8 | 6.5 |
Thread
JIS B0203 Rc (PT) JIS B0202 G (PF): ISO 228-1 Interchangeable
ANSI/ASME B.I.20.1－1983 (NPT)
* Drawing for 3 Circuit Type is selected. The total number of Q, R and S threads is 9.
[ ! ] Mounting hole shape can be selected freely.
[ ! ] Standard hole shape is selected when no hole shape modification is specified.
For 20 sq., however, through hole is selected by default.
[L Dimension Calculation]
Example: For BMGFP3- to -P25
L = N × P + 2E = (Number of Circuits 3 - 1) × 25 + 2 × 20 = 90
| Type | [M] Material | [S] Surface Treatment | Max. Operating Pressure | ||||||
| Pitch (P) Standard | Pitch (P) Configurable | ||||||||
| 20 sq. | 25 sq. | 35 sq. | 50 Sq. | 20 sq. | 25 sq. | 35 sq. | |||
| BMGFC | BMGF | BMGFK | BMGFL | BMGFCP | BMGFP | BMGFKP | Aluminum Alloy | — | 1 MPa ≈ 10 kgf/cm2 or less |
| BMGFCA | BMGFA | — | BMGFLA | BMGFCAP | BMGFAP | — | Clear Anodize | ||
Specification Table
| Part Number | — | Q | — | R | — | S | — | P | ||||||
| Type | Mounting Hole Change | Number of Circuits | ||||||||||||
| BMGF BMGFP G−BMGFP | T ZT ZT | 4 4 4 | — — — | Q2 Q2 Q2 | — — — | R5 R2 R2 | — — — | S2 S2 S2 | — — | P50 P50 | (G Thread) | |||
| Part Number | Rc (PT), NPT, M (Coarse) Selection | Pitch P | Number of Pitches N | Total Number of Q, R and S Threads | A | B | E | F | X | Y | Mounting Hole | ||||
| Type | Mounting Hole Change | Number of Circuits | Q·R·S | Standard | Configurable 1 mm Increments | M | |||||||||
| (20 sq.) | T (Tapped) YN(Side Through) | 1 | 1 (1/8) M3 (M3) M4 (M4) 5 (M5) | — | — | 0 | 3 | 20 | 20 | 20 | 10 | 5 | 4 | M5 | |
| Pitch Standard BMGFC BMGFCA | Pitch Configurable BMGFCP BMGFCAP | 2 | 15 | 15 to 50 | 1 | 6 | |||||||||
| 3 | 2 | 9 | |||||||||||||
| 4 | 3 | 12 | |||||||||||||
| 5 | 4 | 15 | |||||||||||||
| 6 | 5 | 18 | |||||||||||||
| 7 | 20 to 50 | 6 | 21 | ||||||||||||
| 8 | 7 | 24 | |||||||||||||
| (25 sq.) | NA (Through) T(Tapped) ZT(Counterbore Tapped) YZ(Side Counterbore) YN(Side Through) | 1 | 1 (1/8) 2 (1/4) 5 (M5) 1 N (NPT1/8) 2 N (NPT1/4) | — | — | 0 | 3 | 25 | 25 | 20 | 12.5 | 7.5 | 7 | M5 | |
| Pitch Standard BMGF BMGFA | Pitch Configurable BMGFP BMGFAP | 2 | 30 | 20 to 50 | 1 | 6 | |||||||||
| 3 | 2 | 9 | |||||||||||||
| 4 | 3 | 12 | |||||||||||||
| 5 | 4 | 15 | |||||||||||||
| 6 | 25 to 50 | 5 | 18 | ||||||||||||
| 7 | 6 | 21 | |||||||||||||
| 8 | 7 | 24 | |||||||||||||
| (35 sq.) | 1 | 1 (1/8) 2 (1/4) 5 (M5) 1 N (NPT1/8) 2 N (NPT1/4) | — | — | 0 | 3 | 35 | 35 | 20 | 17.5 | 7.5 | 7 | M5 | ||
| Pitch Standard BMGFK | Pitch Configurable BMGFKP | 2 | 30 | 20 to 50 | 1 | 6 | |||||||||
| 3 | 2 | 9 | |||||||||||||
| 4 | 3 | 12 | |||||||||||||
| 5 | 4 | 15 | |||||||||||||
| 6 | 25 to 50 | 5 | 18 | ||||||||||||
| 7 | 6 | 21 | |||||||||||||
| 8 | 7 | 24 | |||||||||||||
| (50 sq.) | 1 | 2 (1/4) 3 (3/8) 4 (1/2) | — | — | 0 | 3 | 50 | 50 | 25 | 25 | 8.5 | 8.5 | M8 | ||
| Pitch Standard BMGFL BMGFLA | 2 | 40 | — | 1 | 6 | ||||||||||
| 3 | 2 | 9 | |||||||||||||
| 4 | 3 | 12 | |||||||||||||
| 5 | 4 | 15 | |||||||||||||
| 6 | 5 | 18 | |||||||||||||
[ ! ]For Q, R and S, specify 1, 2, 3, 4, 5, M3, M4, 1N or 2N indicated before (). [!]Single Circuit is not available for Pitch Configurable Type.
[!]Specify the pitch taking into consideration the necessary dimensions for fitting the couplings. [!]Each 6 and 8 Circuit Type has an additional mounting hole at the midpoint of the overall length. 7 Circuit Type has an additional mounting hole at each midpoint of the 2-3 port pitch, and 5-6 port pitch from the left to the right. (Except for 20 Sq. and 25 Sq.)
[ ! ] For Block Square 25 Type, when 1/4 is selected for both tapered threads at right angles, the tapered male threads may interfere with each other. Select Block Square 35 Type instead.
[!]Select NA, T or ZT for the mounting hole shape of 7 and 8 Circuit Types.
Part Number:
- In order to open the 3D preview, the part number must be fixed.
3D preview is not available, because the part number has not yet been determined.
| Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | RoHS | Surface Treatment | Block Size (mm) | Number of Circuits (Circuits) | Thread Size / Type | Mounting Hole Change | Pitch P (mm) | Pitch Standard / Configurable | Drawing Q Part Thread Dia. NPT Selection [Q] | Drawing R Part Thread Dia. NPT Selection [R] | Drawing S Part Thread Dia. NPT Selection [S] | Select a value for M Thread (Coarse) Dia. on Q (in Drawing). [QM] 3(M3) 4(M4) | Select a value for M Thread (Coarse) Dia. on R (in Drawing). [RM] 3(M3) 4(M4) | Select a value for M Thread (Coarse) Dia. on S (in Drawing). [SM] 3(M3) 4(M4) | Select a value for PT/PF, M Thread (Coarse) Dia. on Q (in Drawing). [Q] 1(1/8) 2(1/4) 3(3/8) 4(1/2) 5(M5) | Select a value for PT/PF, M Thread (Coarse) Dia. on R (in Drawing). [R] 1(1/8) 2(1/4) 3(3/8) 4(1/2) 5(M5) | Select a value for PT/PF, M Thread (Coarse) Dia. on S (in Drawing). [S] 1(1/8) 2(1/4) 3(3/8) 4(1/2) 5(M5) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
- | 1 | 9 Days | 10 | Not Provided | 25 x 25 | 1 | Standard Thread {PT, m (Coarse) Thread} | Not Specified (Counterbore) | 30 | Fixed Type | 1/4 [Q2N] / 1/8 [Q1N] | 1/4 [R2N] / 1/8 [R1N] | 1/4 [S2N] / 1/8 [S1N] | - | - | - | - | - | - | ||
- | 1 | 9 Days | 10 | Not Provided | 25 x 25 | 1 | Standard Thread {PT, m (Coarse) Thread} | Not Specified (Counterbore) | 30 | Fixed Type | 1/4 [Q2N] / 1/8 [Q1N] | 1/4 [R2N] / 1/8 [R1N] | - | - | - | - | - | - | 1 ～ 5 | ||
- | 1 | 9 Days | 10 | Not Provided | 25 x 25 | 1 | Standard Thread {PT, m (Coarse) Thread} | Not Specified (Counterbore) | 30 | Fixed Type | 1/4 [Q2N] / 1/8 [Q1N] | - | 1/4 [S2N] / 1/8 [S1N] | - | - | - | - | 1 ～ 5 | - | ||
- | 1 | 9 Days | 10 | Not Provided | 25 x 25 | 1 | Standard Thread {PT, m (Coarse) Thread} | Not Specified (Counterbore) | 30 | Fixed Type | 1/4 [Q2N] / 1/8 [Q1N] | - | - | - | - | - | - | 1 ～ 5 | 1 ～ 5 | ||
- | 1 | 9 Days | 10 | Not Provided | 25 x 25 | 1 | Standard Thread {PT, m (Coarse) Thread} | Not Specified (Counterbore) | 30 | Fixed Type | - | 1/4 [R2N] / 1/8 [R1N] | 1/4 [S2N] / 1/8 [S1N] | - | - | - | 1 ～ 5 | - | - | ||
- | 1 | 9 Days | 10 | Not Provided | 25 x 25 | 1 | Standard Thread {PT, m (Coarse) Thread} | Not Specified (Counterbore) | 30 | Fixed Type | - | 1/4 [R2N] / 1/8 [R1N] | - | - | - | - | 1 ～ 5 | - | 1 ～ 5 | ||
- | 1 | 9 Days | 10 | Not Provided | 25 x 25 | 1 | Standard Thread {PT, m (Coarse) Thread} | Not Specified (Counterbore) | 30 | Fixed Type | - | - | 1/4 [S2N] / 1/8 [S1N] | - | - | - | 1 ～ 5 | 1 ～ 5 | - | ||
- | 1 | 9 Days | 10 | Not Provided | 25 x 25 | 1 | Standard Thread {PT, m (Coarse) Thread} | Not Specified (Counterbore) | 30 | Fixed Type | - | - | - | - | - | - | 1 ～ 5 | 1 ～ 5 | 1 ～ 5 | ||
- | 1 | 9 Days | 10 | Not Provided | 25 x 25 | 2 | Standard Thread {PT, m (Coarse) Thread} | Not Specified (Counterbore) | 30 | Fixed Type | 1/4 [Q2N] / 1/8 [Q1N] | 1/4 [R2N] / 1/8 [R1N] | 1/4 [S2N] / 1/8 [S1N] | - | - | - | - | - | - | ||
- | 1 | 9 Days | 10 | Not Provided | 25 x 25 | 2 | Standard Thread {PT, m (Coarse) Thread} | Not Specified (Counterbore) | 30 | Fixed Type | 1/4 [Q2N] / 1/8 [Q1N] | 1/4 [R2N] / 1/8 [R1N] | - | - | - | - | - | - | 1 ～ 5 | ||
- | 1 | 9 Days | 10 | Not Provided | 25 x 25 | 2 | Standard Thread {PT, m (Coarse) Thread} | Not Specified (Counterbore) | 30 | Fixed Type | 1/4 [Q2N] / 1/8 [Q1N] | - | 1/4 [S2N] / 1/8 [S1N] | - | - | - | - | 1 ～ 5 | - | ||
- | 1 | 9 Days | 10 | Not Provided | 25 x 25 | 2 | Standard Thread {PT, m (Coarse) Thread} | Not Specified (Counterbore) | 30 | Fixed Type | 1/4 [Q2N] / 1/8 [Q1N] | - | - | - | - | - | - | 1 ～ 5 | 1 ～ 5 | ||
- | 1 | 9 Days | 10 | Not Provided | 25 x 25 | 2 | Standard Thread {PT, m (Coarse) Thread} | Not Specified (Counterbore) | 30 | Fixed Type | - | 1/4 [R2N] / 1/8 [R1N] | 1/4 [S2N] / 1/8 [S1N] | - | - | - | 1 ～ 5 | - | - | ||
- | 1 | 9 Days | 10 | Not Provided | 25 x 25 | 2 | Standard Thread {PT, m (Coarse) Thread} | Not Specified (Counterbore) | 30 | Fixed Type | - | 1/4 [R2N] / 1/8 [R1N] | - | - | - | - | 1 ～ 5 | - | 1 ～ 5 | ||
- | 1 | 9 Days | 10 | Not Provided | 25 x 25 | 2 | Standard Thread {PT, m (Coarse) Thread} | Not Specified (Counterbore) | 30 | Fixed Type | - | - | 1/4 [S2N] / 1/8 [S1N] | - | - | - | 1 ～ 5 | 1 ～ 5 | - | ||
- | 1 | 9 Days | 10 | Not Provided | 25 x 25 | 2 | Standard Thread {PT, m (Coarse) Thread} | Not Specified (Counterbore) | 30 | Fixed Type | - | - | - | - | - | - | 1 ～ 5 | 1 ～ 5 | 1 ～ 5 | ||
- | 1 | 9 Days | 10 | Not Provided | 25 x 25 | 3 | Standard Thread {PT, m (Coarse) Thread} | Not Specified (Counterbore) | 30 | Fixed Type | 1/4 [Q2N] / 1/8 [Q1N] | 1/4 [R2N] / 1/8 [R1N] | 1/4 [S2N] / 1/8 [S1N] | - | - | - | - | - | - | ||
- | 1 | 9 Days | 10 | Not Provided | 25 x 25 | 3 | Standard Thread {PT, m (Coarse) Thread} | Not Specified (Counterbore) | 30 | Fixed Type | 1/4 [Q2N] / 1/8 [Q1N] | 1/4 [R2N] / 1/8 [R1N] | - | - | - | - | - | - | 1 ～ 5 | ||
- | 1 | 9 Days | 10 | Not Provided | 25 x 25 | 3 | Standard Thread {PT, m (Coarse) Thread} | Not Specified (Counterbore) | 30 | Fixed Type | 1/4 [Q2N] / 1/8 [Q1N] | - | 1/4 [S2N] / 1/8 [S1N] | - | - | - | - | 1 ～ 5 | - | ||
- | 1 | 9 Days | 10 | Not Provided | 25 x 25 | 3 | Standard Thread {PT, m (Coarse) Thread} | Not Specified (Counterbore) | 30 | Fixed Type | 1/4 [Q2N] / 1/8 [Q1N] | - | - | - | - | - | - | 1 ～ 5 | 1 ～ 5 | ||
- | 1 | 9 Days | 10 | Not Provided | 25 x 25 | 3 | Standard Thread {PT, m (Coarse) Thread} | Not Specified (Counterbore) | 30 | Fixed Type | - | 1/4 [R2N] / 1/8 [R1N] | 1/4 [S2N] / 1/8 [S1N] | - | - | - | 1 ～ 5 | - | - | ||
- | 1 | 9 Days | 10 | Not Provided | 25 x 25 | 3 | Standard Thread {PT, m (Coarse) Thread} | Not Specified (Counterbore) | 30 | Fixed Type | - | 1/4 [R2N] / 1/8 [R1N] | - | - | - | - | 1 ～ 5 | - | 1 ～ 5 | ||
- | 1 | 9 Days | 10 | Not Provided | 25 x 25 | 3 | Standard Thread {PT, m (Coarse) Thread} | Not Specified (Counterbore) | 30 | Fixed Type | - | - | 1/4 [S2N] / 1/8 [S1N] | - | - | - | 1 ～ 5 | 1 ～ 5 | - | ||
- | 1 | 9 Days | 10 | Not Provided | 25 x 25 | 3 | Standard Thread {PT, m (Coarse) Thread} | Not Specified (Counterbore) | 30 | Fixed Type | - | - | - | - | - | - | 1 ～ 5 | 1 ～ 5 | 1 ～ 5 | ||
- | 1 | 9 Days | 10 | Not Provided | 25 x 25 | 4 | Standard Thread {PT, m (Coarse) Thread} | Not Specified (Counterbore) | 30 | Fixed Type | 1/4 [Q2N] / 1/8 [Q1N] | 1/4 [R2N] / 1/8 [R1N] | 1/4 [S2N] / 1/8 [S1N] | - | - | - | - | - | - | ||
- | 1 | 9 Days | 10 | Not Provided | 25 x 25 | 4 | Standard Thread {PT, m (Coarse) Thread} | Not Specified (Counterbore) | 30 | Fixed Type | 1/4 [Q2N] / 1/8 [Q1N] | 1/4 [R2N] / 1/8 [R1N] | - | - | - | - | - | - | 1 ～ 5 | ||
- | 1 | 9 Days | 10 | Not Provided | 25 x 25 | 4 | Standard Thread {PT, m (Coarse) Thread} | Not Specified (Counterbore) | 30 | Fixed Type | 1/4 [Q2N] / 1/8 [Q1N] | - | 1/4 [S2N] / 1/8 [S1N] | - | - | - | - | 1 ～ 5 | - | ||
- | 1 | 9 Days | 10 | Not Provided | 25 x 25 | 4 | Standard Thread {PT, m (Coarse) Thread} | Not Specified (Counterbore) | 30 | Fixed Type | 1/4 [Q2N] / 1/8 [Q1N] | - | - | - | - | - | - | 1 ～ 5 | 1 ～ 5 | ||
- | 1 | 9 Days | 10 | Not Provided | 25 x 25 | 4 | Standard Thread {PT, m (Coarse) Thread} | Not Specified (Counterbore) | 30 | Fixed Type | - | 1/4 [R2N] / 1/8 [R1N] | 1/4 [S2N] / 1/8 [S1N] | - | - | - | 1 ～ 5 | - | - | ||
- | 1 | 9 Days | 10 | Not Provided | 25 x 25 | 4 | Standard Thread {PT, m (Coarse) Thread} | Not Specified (Counterbore) | 30 | Fixed Type | - | 1/4 [R2N] / 1/8 [R1N] | - | - | - | - | 1 ～ 5 | - | 1 ～ 5 | ||
- | 1 | 9 Days | 10 | Not Provided | 25 x 25 | 4 | Standard Thread {PT, m (Coarse) Thread} | Not Specified (Counterbore) | 30 | Fixed Type | - | - | 1/4 [S2N] / 1/8 [S1N] | - | - | - | 1 ～ 5 | 1 ～ 5 | - | ||
- | 1 | 9 Days | 10 | Not Provided | 25 x 25 | 4 | Standard Thread {PT, m (Coarse) Thread} | Not Specified (Counterbore) | 30 | Fixed Type | - | - | - | - | - | - | 1 ～ 5 | 1 ～ 5 | 1 ～ 5 | ||
- | 1 | 9 Days | 10 | Not Provided | 25 x 25 | 5 | Standard Thread {PT, m (Coarse) Thread} | Not Specified (Counterbore) | 30 | Fixed Type | 1/4 [Q2N] / 1/8 [Q1N] | 1/4 [R2N] / 1/8 [R1N] | 1/4 [S2N] / 1/8 [S1N] | - | - | - | - | - | - | ||
- | 1 | 9 Days | 10 | Not Provided | 25 x 25 | 5 | Standard Thread {PT, m (Coarse) Thread} | Not Specified (Counterbore) | 30 | Fixed Type | 1/4 [Q2N] / 1/8 [Q1N] | 1/4 [R2N] / 1/8 [R1N] | - | - | - | - | - | - | 1 ～ 5 | ||
- | 1 | 9 Days | 10 | Not Provided | 25 x 25 | 5 | Standard Thread {PT, m (Coarse) Thread} | Not Specified (Counterbore) | 30 | Fixed Type | 1/4 [Q2N] / 1/8 [Q1N] | - | 1/4 [S2N] / 1/8 [S1N] | - | - | - | - | 1 ～ 5 | - | ||
- | 1 | 9 Days | 10 | Not Provided | 25 x 25 | 5 | Standard Thread {PT, m (Coarse) Thread} | Not Specified (Counterbore) | 30 | Fixed Type | 1/4 [Q2N] / 1/8 [Q1N] | - | - | - | - | - | - | 1 ～ 5 | 1 ～ 5 | ||
- | 1 | 9 Days | 10 | Not Provided | 25 x 25 | 5 | Standard Thread {PT, m (Coarse) Thread} | Not Specified (Counterbore) | 30 | Fixed Type | - | 1/4 [R2N] / 1/8 [R1N] | 1/4 [S2N] / 1/8 [S1N] | - | - | - | 1 ～ 5 | - | - | ||
- | 1 | 9 Days | 10 | Not Provided | 25 x 25 | 5 | Standard Thread {PT, m (Coarse) Thread} | Not Specified (Counterbore) | 30 | Fixed Type | - | 1/4 [R2N] / 1/8 [R1N] | - | - | - | - | 1 ～ 5 | - | 1 ～ 5 | ||
- | 1 | 9 Days | 10 | Not Provided | 25 x 25 | 5 | Standard Thread {PT, m (Coarse) Thread} | Not Specified (Counterbore) | 30 | Fixed Type | - | - | 1/4 [S2N] / 1/8 [S1N] | - | - | - | 1 ～ 5 | 1 ～ 5 | - | ||
- | 1 | 9 Days | 10 | Not Provided | 25 x 25 | 5 | Standard Thread {PT, m (Coarse) Thread} | Not Specified (Counterbore) | 30 | Fixed Type | - | - | - | - | - | - | 1 ～ 5 | 1 ～ 5 | 1 ～ 5 | ||
- | 1 | 9 Days | 10 | Not Provided | 25 x 25 | 6 | Standard Thread {PT, m (Coarse) Thread} | Not Specified (Counterbore) | 30 | Fixed Type | 1/4 [Q2N] / 1/8 [Q1N] | 1/4 [R2N] / 1/8 [R1N] | 1/4 [S2N] / 1/8 [S1N] | - | - | - | - | - | - | ||
- | 1 | 9 Days | 10 | Not Provided | 25 x 25 | 6 | Standard Thread {PT, m (Coarse) Thread} | Not Specified (Counterbore) | 30 | Fixed Type | 1/4 [Q2N] / 1/8 [Q1N] | 1/4 [R2N] / 1/8 [R1N] | - | - | - | - | - | - | 1 ～ 5 | ||
- | 1 | 9 Days | 10 | Not Provided | 25 x 25 | 6 | Standard Thread {PT, m (Coarse) Thread} | Not Specified (Counterbore) | 30 | Fixed Type | 1/4 [Q2N] / 1/8 [Q1N] | - | 1/4 [S2N] / 1/8 [S1N] | - | - | - | - | 1 ～ 5 | - | ||
- | 1 | 9 Days | 10 | Not Provided | 25 x 25 | 6 | Standard Thread {PT, m (Coarse) Thread} | Not Specified (Counterbore) | 30 | Fixed Type | 1/4 [Q2N] / 1/8 [Q1N] | - | - | - | - | - | - | 1 ～ 5 | 1 ～ 5 | ||
- | 1 | 9 Days | 10 | Not Provided | 25 x 25 | 6 | Standard Thread {PT, m (Coarse) Thread} | Not Specified (Counterbore) | 30 | Fixed Type | - | 1/4 [R2N] / 1/8 [R1N] | 1/4 [S2N] / 1/8 [S1N] | - | - | - | 1 ～ 5 | - | - | ||
- | 1 | 9 Days | 10 | Not Provided | 25 x 25 | 6 | Standard Thread {PT, m (Coarse) Thread} | Not Specified (Counterbore) | 30 | Fixed Type | - | 1/4 [R2N] / 1/8 [R1N] | - | - | - | - | 1 ～ 5 | - | 1 ～ 5 | ||
- | 1 | 9 Days | 10 | Not Provided | 25 x 25 | 6 | Standard Thread {PT, m (Coarse) Thread} | Not Specified (Counterbore) | 30 | Fixed Type | - | - | 1/4 [S2N] / 1/8 [S1N] | - | - | - | 1 ～ 5 | 1 ～ 5 | - | ||
- | 1 | 9 Days | 10 | Not Provided | 25 x 25 | 6 | Standard Thread {PT, m (Coarse) Thread} | Not Specified (Counterbore) | 30 | Fixed Type | - | - | - | - | - | - | 1 ～ 5 | 1 ～ 5 | 1 ～ 5 | ||
- | 1 | 9 Days | 10 | Not Provided | 25 x 25 | 7 | Standard Thread {PT, m (Coarse) Thread} | Not Specified (Counterbore) | 30 | Fixed Type | 1/4 [Q2N] / 1/8 [Q1N] | 1/4 [R2N] / 1/8 [R1N] | 1/4 [S2N] / 1/8 [S1N] | - | - | - | - | - | - | ||
- | 1 | 9 Days | 10 | Not Provided | 25 x 25 | 7 | Standard Thread {PT, m (Coarse) Thread} | Not Specified (Counterbore) | 30 | Fixed Type | 1/4 [Q2N] / 1/8 [Q1N] | 1/4 [R2N] / 1/8 [R1N] | - | - | - | - | - | - | 1 ～ 5 | ||
- | 1 | 9 Days | 10 | Not Provided | 25 x 25 | 7 | Standard Thread {PT, m (Coarse) Thread} | Not Specified (Counterbore) | 30 | Fixed Type | 1/4 [Q2N] / 1/8 [Q1N] | - | 1/4 [S2N] / 1/8 [S1N] | - | - | - | - | 1 ～ 5 | - | ||
- | 1 | 9 Days | 10 | Not Provided | 25 x 25 | 7 | Standard Thread {PT, m (Coarse) Thread} | Not Specified (Counterbore) | 30 | Fixed Type | 1/4 [Q2N] / 1/8 [Q1N] | - | - | - | - | - | - | 1 ～ 5 | 1 ～ 5 | ||
- | 1 | 9 Days | 10 | Not Provided | 25 x 25 | 7 | Standard Thread {PT, m (Coarse) Thread} | Not Specified (Counterbore) | 30 | Fixed Type | - | 1/4 [R2N] / 1/8 [R1N] | 1/4 [S2N] / 1/8 [S1N] | - | - | - | 1 ～ 5 | - | - | ||
- | 1 | 9 Days | 10 | Not Provided | 25 x 25 | 7 | Standard Thread {PT, m (Coarse) Thread} | Not Specified (Counterbore) | 30 | Fixed Type | - | 1/4 [R2N] / 1/8 [R1N] | - | - | - | - | 1 ～ 5 | - | 1 ～ 5 | ||
- | 1 | 9 Days | 10 | Not Provided | 25 x 25 | 7 | Standard Thread {PT, m (Coarse) Thread} | Not Specified (Counterbore) | 30 | Fixed Type | - | - | 1/4 [S2N] / 1/8 [S1N] | - | - | - | 1 ～ 5 | 1 ～ 5 | - | ||
- | 1 | 9 Days | 10 | Not Provided | 25 x 25 | 7 | Standard Thread {PT, m (Coarse) Thread} | Not Specified (Counterbore) | 30 | Fixed Type | - | - | - | - | - | - | 1 ～ 5 | 1 ～ 5 | 1 ～ 5 | ||
- | 1 | 9 Days | 10 | Not Provided | 25 x 25 | 8 | Standard Thread {PT, m (Coarse) Thread} | Not Specified (Counterbore) | 30 | Fixed Type | 1/4 [Q2N] / 1/8 [Q1N] | 1/4 [R2N] / 1/8 [R1N] | 1/4 [S2N] / 1/8 [S1N] | - | - | - | - | - | - | ||
- | 1 | 9 Days | 10 | Not Provided | 25 x 25 | 8 | Standard Thread {PT, m (Coarse) Thread} | Not Specified (Counterbore) | 30 | Fixed Type | 1/4 [Q2N] / 1/8 [Q1N] | 1/4 [R2N] / 1/8 [R1N] | - | - | - | - | - | - | 1 ～ 5 | ||
- | 1 | 9 Days | 10 | Not Provided | 25 x 25 | 8 | Standard Thread {PT, m (Coarse) Thread} | Not Specified (Counterbore) | 30 | Fixed Type | 1/4 [Q2N] / 1/8 [Q1N] | - | 1/4 [S2N] / 1/8 [S1N] | - | - | - | - | 1 ～ 5 | - | ||
- | 1 | 9 Days | 10 | Not Provided | 25 x 25 | 8 | Standard Thread {PT, m (Coarse) Thread} | Not Specified (Counterbore) | 30 | Fixed Type | 1/4 [Q2N] / 1/8 [Q1N] | - | - | - | - | - | - | 1 ～ 5 | 1 ～ 5 |
Loading...
Basic information
| Shape | T-Shaped Hole | Material | EN AW-5052 Equiv. | Application | Pneumatic |
|---|
Configure
Basic Attributes
-
Surface Treatment
- Not Provided
- Clear Anodized Aluminum
-
Block Size(mm)
- 20 x 20
- 25 x 25
- 35 x 35
- 50 x 50
-
Number of Circuits(Circuits)
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
-
Thread Size / Type
-
Mounting Hole Change
- NA (Through)
- Not Specified (Counterbore)
- Not Specified (Through)
- T (Tapped)
- YN (Side Through)
- YZ (Side Counterbore)
- ZT (Counterbore Tapped)
-
Pitch P(mm)
-
Pitch Standard / Configurable
- Configurable Type
- Fixed Type
-
Drawing Q Part Thread Dia. NPT Selection [Q]
- 1/4 [Q2N]
- 1/8 [Q1N]
-
Drawing R Part Thread Dia. NPT Selection [R]
- 1/4 [R2N]
- 1/8 [R1N]
-
Drawing S Part Thread Dia. NPT Selection [S]
- 1/4 [S2N]
- 1/8 [S1N]
-
Select a value for M Thread (Coarse) Dia. on Q (in Drawing). [QM] 3(M3) 4(M4)
-
Select a value for M Thread (Coarse) Dia. on R (in Drawing). [RM] 3(M3) 4(M4)
-
Select a value for M Thread (Coarse) Dia. on S (in Drawing). [SM] 3(M3) 4(M4)
-
Select a value for PT/PF, M Thread (Coarse) Dia. on Q (in Drawing). [Q] 1(1/8) 2(1/4) 3(3/8) 4(1/2) 5(M5)
-
Select a value for PT/PF, M Thread (Coarse) Dia. on R (in Drawing). [R] 1(1/8) 2(1/4) 3(3/8) 4(1/2) 5(M5)
-
Select a value for PT/PF, M Thread (Coarse) Dia. on S (in Drawing). [S] 1(1/8) 2(1/4) 3(3/8) 4(1/2) 5(M5)
-
Type
- BMGF
- BMGFA
- BMGFAP
- BMGFC
- BMGFCA
- BMGFCAP
- BMGFCP
- BMGFK
- BMGFKP
- BMGFL
- BMGFLA
- BMGFP
- G-BMGF
- G-BMGFA
- G-BMGFAP
- G-BMGFC
- G-BMGFCA
- G-BMGFCAP
- G-BMGFCP
- G-BMGFK
- G-BMGFKP
- G-BMGFL
- G-BMGFLA
- G-BMGFP
-
Filter by CAD data type
- 2D
- 3D
Filter by standard shipping days
-
- All
- 7 Days or Less
- 9 Days or Less
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Complementary Products
-
Flow Rate Control Valves / 90 Deg. Elbow / Miniature
MISUMI Standard Price : 7.67 € Shipping Days: Same day
Tech Support
- Technical Support
- Tel：+49 69 668173-0 / FAX：+49 69 668173-360
- Technical Inquiry
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.