Bite Hydraulic Pipe Fittings / Elbow / Threaded
- Promotional pricing
- Volume Discount
(i)Remark
- All products come with a sleeve.
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
- Drawing / Specifications
- 3D Preview 3D preview is available after complete configuration
- Part Numbers
- Catalog
No.6-1 / 8-1 / 8 A-3 / 10 A-4 / 15 A-6
Others
| Type | [M] Material | [S] Surface Treatment |
| KTGE | Main Body‚ Nut: EN 1.1158 Equiv. | Trivalent Chromate |
| Sleeve: Carbon Steel | — |
Specification Table
| Part Number |
| KTGE10-2 |
| Part Number | Applicable Pipe O.D. D | T R (PT) | E | E1 | Reference Dia. G | Tightening by Hand Approx. L | L1 | Wrench Flats h | Hex Square Size H | F | ℓ | |
| Type | No. | |||||||||||
| KTGE | 6－1 | 6 | 1/8 | 4 | 4 | 3.97 | 30.5 | 14 | 14 | 14 | 7 | 20 |
| 6－2 | 6 | 1/4 | 4 | 4.5 | 6.01 | 33.5 | 17 | 17 | 14 | 7 | 23 | |
| 8－1 | 8 | 1/8 | 6 | 4 | 3.97 | 33.5 | 16 | 17 | 17 | 7 | 23 | |
| 8－2 | 8 | 1/4 | 6 | 6.5 | 6.01 | 33.5 | 18 | 17 | 17 | 7 | 23 | |
| 10－2 | 10 | 1/4 | 8 | 7.5 | 6.01 | 34.5 | 19 | 17 | 19 | 7 | 23 | |
| 10－3 | 10 | 3/8 | 8 | 8.5 | 6.35 | 35.5 | 19.5 | 19 | 19 | 7 | 24 | |
| 12－2 | 12 | 1/4 | 10 | 7.5 | 6.01 | 35.5 | 20 | 19 | 22 | 7 | 24 | |
| 8 A－3 | 13.8 | 3/8 | 11 | 9 | 6.35 | 40 | 22.5 | 22 | 24 | 7.5 | 28 | |
| 10 A－4 | 17.3 | 1/2 | 14 | 12 | 8.16 | 45 | 30 | 27 | 32 | 8 | 32 | |
| 15 A－6 | 21.7 | 3/4 | 18 | 16 | 9.53 | 47 | 32.5 | 32 | 36 | 9 | 34 | |
Sleeves of No.8 A, 10 A, 15 A is different from those for KTGSL.
No. 8 has approx. 1.4 mm protrusion for improving pressure resistance.
Features
- A joint that allows you to connect pipes simply by tightening the nut when there is no space for piping work or welding is not possible. It is an excellent product that completes the piping work by inserting the pipe or tube into the nut and tightening it.
- After temporarily tightening, attach it to the main body, and when you tighten the swaging sleeve nut, tighten it another 3/4 to 1 turn from the point where it suddenly feels tackier, and the tightening work is complete.
Structure/Tightening Procedure
Swaged Sleeve Fittings are composed of a main body, a sleeve and a nut.
[Tightening Procedure]
For utilizing performance of Swaged Sleeve Fittings for Steel Pipes, use of appropriate pipe and accurate tightening of fitting are required.
The following pre-tightening will make plumbing smooth and secure.
(1) Pre-tightening
- Insert the pipe with nut and sleeve inserted as shown in right figure into the fitting body. Make sure that pipe end contacts abutment part. Inadequate swaging due to the inadequate tightening may cause the pipe to pull out.
- Tighten the nut by hand.
- Tighten the nut with a wrench while rotating the pipe to the end of its rotation. Put a mark on this position of fitting body and the nut.
- Further tighten the nut by a wrench with1-1/4 turn at this mark.
- Loosen the nut once to see the state of the sleeve in order to confirm the following.
A: There is some millimeter distance between pipe end and sleeve end.
B: No substantial movement of the sleeve toward the direction of pipe axis is allowable. Moving toward circumferential direction is acceptable.
(2) Attach the pre-tightened pipe with
fitting body and tighten the nut by a wrench until you feel sudden resistance. Further tighten the nut by 1/4 turn, and tightening will be done.
[Disassembly/retightening]
- Can be disassembled just by loosening the nut. However, never tighten and loosen the nut while pressurized as it is very dangerous.
- 8 or more disassemblies and retightening are possible by following the Full Tightening Procedure as shown in (2).
[ ! ]Make sure that the tapered end of the sleeve is facing the fitting body.
If inserted backwards, pipe will not be properly swaged and may pull-off.
Part Number:
- In order to open the 3D preview, the part number must be fixed.
3D preview is not available, because the part number has not yet been determined.
Part Number
|
|---|
| KTGE6-1 |
| KTGE6-2 |
| KTGE8-1 |
| KTGE8-2 |
| KTGE8A-3 |
| KTGE10-2 |
| KTGE10-3 |
| KTGE10A-4 |
| KTGE12-2 |
| KTGE15A-6 |
| Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | RoHS | Thread Nominal | Max. Operating Pressure (MPa) | |
|---|---|---|---|---|---|---|---|
7.06 € 4.02 € | 1 | Available |
Same day
Stock | 10 | 1/8B(6A) | 50 | |
7.67 € | 1 | Available | 5 Days | 10 | 1/4B(8A) | 50 | |
7.67 € | 1 | Available | 5 Days | 10 | 1/8B(6A) | 50 | |
7.67 € | 1 | Available | 5 Days | 10 | 1/4B(8A) | 50 | |
11.21 € | 1 | Available | 5 Days | 10 | 3/8B(10A) | 50 | |
8.31 € | 1 | Available | 5 Days | 10 | 1/4B(8A) | 50 | |
8.95 € | 1 | Available | 5 Days | 10 | 3/8B(10A) | 50 | |
13.60 € | 1 | Available | 5 Days | 10 | 1/2B(15A) | 40 | |
8.95 € | 1 | Available | 5 Days | 10 | 1/4B(8A) | 50 | |
17.00 € | 1 | Available | 5 Days | 10 | 3/4B(20A) | 40 |
Loading...
Basic information
| Type | Fitting | Material | EN 1.1158 Equiv. | Applicable Fluid | Oil |
|---|---|---|---|---|---|
| Connection Type | Pipe-to-Thread, Socket Type | Material of Applicable Pipe | Steel Tube | Connection Thread Type | R |
| Surface Treatment | Trivalent Chromate | Operating Temperature Range(°C) | -20::250 |
Configure
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Complementary Products
-
Hydraulic Fittings / Straight / PT Threaded / PT Threaded
MISUMI Standard Price : 2.52 € Shipping Days: 5 Days
-
Ball Valves / Stainless Steel / PT Female / PF(G) Female
MISUMI Standard Price : 29.47 € Shipping Days: 5 Days
Tech Support
- Technical Support
- Tel：+49 69 668173-0 / FAX：+49 69 668173-360
- Technical Inquiry
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.