• Brands
  • Company
  • Contact
EN / UK
Type Code Seach | *NOT READY*
#CODE
Keyword suggestions
Part number suggestions
Discontinued Products

Bite Hydraulic Pipe Fittings / Check Connector

Bite Hydraulic Pipe Fittings / Check Connector

Click on this image to zoom in.

Click on this image to zoom in.

  • Volume Discount

MISUMI

MISUMI

[Features] A compression fitting suitable for hydraulic piping. -When working on piping where space is limited or welding is not possible, this fitting allows piping to be connected by simply tightening the nuts. -Simply insert a tube or hose into the nut and tighten to complete the piping work. -When the compression nut is tightened, tighten it further by 3/4 to 1 turn from the point where the reaction suddenly increases to complete the tightening process.

Data sheet

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Type[M] Material[S] Surface Treatment
KTGZCMain Body‚ Nut: EN 1.1158 Equiv.Trivalent Chromate
Sleeve: Carbon Steel—

Specification Table

Part Number
KTGZC10-45
Part NumberApplicable Pipe
O.D. D		Rating Flow
l/min		Cracking
Pressure MPa		T
R (PT)		Gauge Dia.
G		Hex SocketFℓTightening by Hand
Approx. L
TypeNo.H1H
KTGZC10−0510180.051/46.01241975358.5
10−450.45
12−0512180.053/86.35242275560
12−450.45
■Features: Fitting with a built-in reverse flow prevention structure.

Features

  • A joint that allows you to connect pipes simply by tightening the nut when there is no space for piping work or welding is not possible. It is an excellent product that completes the piping work by inserting the pipe or tube into the nut and tightening it.
  • After temporarily tightening, attach it to the main body, and when you tighten the swaging sleeve nut, tighten it another 3/4 to 1 turn from the point where it suddenly feels tackier, and the tightening work is complete.

Structure/Tightening Procedure

Swaged Sleeve Fittings are composed of a main body, a sleeve and a nut. 

 

[Tightening Procedure] 

For utilizing performance of Swaged Sleeve Fittings for Steel Pipes, use of appropriate pipe and accurate tightening of fitting are required.
The following pre-tightening will make plumbing smooth and secure. 
(1) Pre-tightening 

  • Insert the pipe with nut and sleeve inserted as shown in right figure into the fitting body. Make sure that pipe end contacts abutment part. Inadequate swaging due to the inadequate tightening may cause the pipe to pull out.
  • Tighten the nut by hand.
  • Tighten the nut with a wrench while rotating the pipe to the end of its rotation. Put a mark on this position of fitting body and the nut.
  • Further tighten the nut by a wrench with1-1/4 turn at this mark.
  • Loosen the nut once to see the state of the sleeve in order to confirm the following. 

 A: There is some millimeter distance between pipe end and sleeve end. 
 B: No substantial movement of the sleeve toward the direction of pipe axis is allowable. Moving toward circumferential direction is acceptable. 

 

(2) Attach the pre-tightened pipe with
fitting body and tighten the nut by a wrench until you feel sudden resistance. Further tighten the nut by 1/4 turn, and tightening will be done.

 

[Disassembly/retightening]

  •  Can be disassembled just by loosening the nut. However, never tighten and loosen the nut while pressurized as it is very dangerous.
  •  8 or more disassemblies and retightening are possible by following the Full Tightening Procedure as shown in (2).
 

[ ! ]Make sure that the tapered end of the sleeve is facing the fitting body.
　
If inserted backwards, pipe will not be properly swaged and may pull-off.
　

Swaged Sleeve Fittings for Hydraulics, Backflow Prevention Connector, Related Image 1_Structure/Tightening Procedure
 

Part Number:  

    3D preview is not available, because the part number has not yet been determined.

  • In order to open the 3D preview, the part number must be fixed.
Loading...

Plug-in is required for 3D Preview

CAD Download

Data to be displayed
30
45
60
  1. 1
Part Number
KTGZC10-05
KTGZC10-45
KTGZC12-05
KTGZC12-45
Part Number
Standard Unit Price
Minimum order quantityVolume Discount
Standard
Shipping Days
?
RoHSThread Nominal Cracking Pressure
(Mpa)

70.53 €

1 Available 5 Days 101/4B(8A)0.05

70.53 €

1 Available 5 Days 101/4B(8A)0.45

70.53 €

1 Available 9 Days 103/8B(10A)0.05

70.53 €

1 Available 9 Days 103/8B(10A)0.45

Loading...

  1. 1

Specifications/Overview

F

Structure and Tightening Procedure of Swaged Sleeve Fittings

Swaged Sleeve Fittings are composed of a main body, a sleeve and a nut.
[Tightening Procedure]
For utilizing performance of Swaged Sleeve Fittings for Steel Pipes, use of appropriate pipe and accurate tightening of fitting are required. The following pre-tightening will make plumbing smooth and secure.

(1) Pre-tightening

(1) Insert the pipe with nut and sleeve inserted as shown in right figure into the fitting body. Make sure that pipe end contacts abutment part. Inadequate swaging due to the inadequate tightening may cause the pipe to pull out.

(2) Tighten the nut by hand.

(3) Tighten the nut with a wrench while rotating the pipe to the end of its rotation. Put a mark on this position of fitting body and the nut.

(4) Further tighten the nut by a wrench with1-1/4 turn at this mark.

(5) Loosen the nut once to see the state of the sleeve in order to confirm the following.

1) There is some millimeter distance between pipe end and sleeve end.

2) No substantial movement of the sleeve toward the direction of pipe axis is allowable. Moving toward circumferential direction is acceptable.

(2) Attach the pre-tightened pipe with
fitting body and tighten the nut by a wrench until you feel sudden resistance. Further tighten the nut by 1/4 turn, and tightening will be done.

Swaged Sleeve Fittings for Hydraulics, Tee, Related Image 1_Structure/Tightening Procedure

[ ! ]Make sure that the tapered end of the sleeve is facing the fitting body.
If inserted backwards, pipe will not be properly swaged and may pull-off.


[Disassembly/retightening]

·Can be disassembled just by loosening the nut. However, never tighten and loosen the nut while pressurized as it is very dangerous.

·8 or more disassemblies and retightening are possible by following the Full Tightening Procedure as shown in (2).

• Specifications (KTGZR·KTGZC)
Applicable Pipe Dia.Max. Operating PressureOperating Temp. Range
10·12 mm10·123 MPa－20°C to 120°C
• Specifications (Other Than Above)
Applicable Pipe Dia.Max. Operating PressureOperating Temp. Range
8 mm850 MPa－20°C to 250°C
6 A10.5
10·12 mm10·12
8 A13.8
10 A17.340 MPa
15 A21.7

[Applicable Pipes]

(1) JIS G 3454 Carbon Steel Pipe for Pressure Service EN 1.0254 Equiv.

(2) JIS G 3455 Carbon Steel Pipe for High Pressure Service STS370

(3) JIS G 3456 Carbon Steel Pipe for High Temperature Service EN 1.0305 Equiv.

(4) JIS G 3459 Stainless Steel Pipe for Plumbing EN 1.4301 Equiv. and EN 1.4401 Equiv.

(5) Japan Fluid Power Association Standard
JOHS-102
Accurate Carbon Steel Pipes for Hydraulics OST

 

Basic information

Type Fitting Material EN 1.1158 Equiv. Applicable Fluid Oil
Connection Type Pipe-to-Thread, Socket Type Material of Applicable Pipe Steel Tube Connection Thread Type R
Max. Operating Pressure(MPa) 3 Surface Treatment Trivalent Chromate Operating Temperature Range(°C) -20::120

Configure

Clear all

4Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.
The part number is completed.

Basic Attributes

  • Thread Nominal

    • 1/4B(8A)
    • 3/8B(10A)

    Clear

  • Cracking Pressure(Mpa)

    • 0.05
    • 0.45

    Clear

  • Type

    • KTGZC

    Clear

  • Filter by CAD data type

    • 2D
    • 3D

    Clear

Filter by standard shipping days

    • All
    • 5 Days or Less
    • 9 Days or Less

    Reset

Optional Attributes

Complementary Products

Tech Support

Technical Support
Tel：+49 69 668173-0 / FAX：+49 69 668173-360
Technical Inquiry

Payment Method

  • Payment on account
  • Pre Payment
  • PayPal

On-Demand Manufacturing

Change View

Certificates

  • ISO-9001
  • ISO-14001
  • AEO Certification
  • RoHS
  • REACH

MISUMI worldwide

Social Media

Legal notice

Copyright © MISUMI Corporation All Rights Reserved.