Vacuum Fall Prevention Valve
- Promotional pricing
- Volume Discount
·If the workpiece is off the vacuum pad, the airflow pushes the valve plug and blocks the suction passage. ·When the workpiece adheres to the vacuum pad, the vacuum suction flow rate decreases, and the valve plug is pushed down by spring force to open the suction passage between the plug and the main body.
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
- Drawing / Specifications
- 3D Preview 3D preview is available after complete configuration
- Part Numbers
- More Information
- Catalog
BAFP
Specification Table
| Part Number |
| BAFP4 |
| Part Name | Material | |
| M4 | M6 | |
| Metal Body A | Stainless Steel | Brass, Electroless Nickel Plating |
| Metal Body B | Brass, Electroless Nickel Plating | Aluminum, Electroless Nickel Plating |
| Valve Body | Aluminum Alloy | |
| Stopper | Brass, Electroless Nickel Plating | |
| Spring | EN 1.4301 Equiv. | |
| Filter | Polyvinyl Formal (PVF) | |
| O-Ring | Nitrile Rubber (NBR) | |
| Gasket | EN 1.4301 Equiv. + Nitrile Rubber (NBR) | |
| Part Number | Thread Size M | A1 | A2 | B | L | P | Square H | Valve Body Operation Suction Flow (ℓ/min (ANR)) | When not attracted Vacuum reduction amount (kPa) | Effective Sectional Area (mm2) | Mass (g) | ||
| Type | No. | Free Flow | Control Flow | ||||||||||
| BAFP | 4 | M4 × 0.7 | 3 | 4.5 | 19.9 | 16.9 | 10 | 10 | 5 | 2 | 1.63 | 0.09 | 7.9 |
| 6 | M6 × 1.0 | 4 | 4.9 | 28.1 | 24.1 | 12 | 12 | 13 | 2 | 4.06 | 0.09 | 12.4 | |
Part Number:
- In order to open the 3D preview, the part number must be fixed.
3D preview is not available, because the part number has not yet been determined.
Loading...
Loading...
Specifications / Overview
| ■Description of Fall Prevention Valve | |
| ·Fall Prevention Valve Operating Condition | ·While Holding Workpiece |
 |  |
| When a workpiece is detached from the vacuum pad, airflow pushes up the valve and shuts the air passage. During operation, the valve sucks small amount of air through a small hole in the middle. | When a workpiece is tightly stuck to vacuum pad, the suction flow is reduced and the spring inside pushes down the valve. As the result, the air passage between the valve and body opens. |
Specifications
| Applicable Fluid | Air |
| Operating Pressure Range | Positive-pressure: 0 to 0.7 MPa |
| Negative-pressure: 0 to -100 kPa | |
| Min. Operating Pressure | -7 kPa |
| Operating Temperature Range | 0 to 60°C |
Basic information
| Type | Related Components | Type of Related Component | Vacuum Fall Prevention Valves |
|---|
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Complementary Products
-
Flow Rate Control Valves / 90 Deg. Elbow / Standard
MISUMI Standard Price : 7.56 € Shipping Days: Same day
-
Suction Holder, Rigid Type, Upper: Single-Action Type (K Shape), Standard Type/Deep Type
MISUMI Standard Price : 12.84 € Shipping Days: Same day
Tech Support
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.