Spray Nozzle Ring Type NZRT
Click on this image to zoom in.
Click on this image to zoom in.
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
- Drawing / Specifications
- 3D Preview 3D preview is available after complete configuration
- Part Numbers
- More Information
- Catalog
Spray Shape: Annular Shape
NZRT
● Spray Angle
[M]Material Main Body, Strainer
(80 mesh) EN 1.4301 Equiv.
(80 mesh) EN 1.4301 Equiv.
Specification Table
| Part Number | — | d |
| NZRT2 | — | 1.0 |
| Part Number | d (Hole Dia.) | T | Weight (g) | |
| Type | No. | |||
| NZRT | 2 | 0.5 | R1/4 | 33.0 |
| 0.7 | ||||
| 1.0 | ||||
| ■NZRT Specifications | |||||||||||||
| Size | Hole Dia. (mm) | 0.5 | 0.7 | 1.0 | |||||||||
| 1/4 | Water Pressure (MPa) | 0.2 | 0.3 | 0.4 | 0.5 | 0.2 | 0.3 | 0.4 | 0.5 | 0.2 | 0.3 | 0.4 | 0.5 |
| Water amount (ℓ/min) | 0.11 | 0.13 | 0.15 | 0.17 | 0.14 | 0.17 | 0.19 | 0.21 | 0.20 | 0.24 | 0.27 | 0.30 | |
| Spray Angle (° ) | 60 | 60 | 65 | 70 | 65 | 65 | 70 | 75 | 65 | 70 | 75 | 80 | |
[!] Does not spray normally at less than 0.2 MPa. If the current fluid is air, the product does not spray with the
values described in the above table.
Part Number:
- In order to open the 3D preview, the part number must be fixed.
3D preview is not available, because the part number has not yet been determined.
Loading...
Loading...
Specifications / Overview
■Features: Since particle is very fine as a fluid nozzle, the higher the water pressure is, the higher the efficiency of air saturation becomes.
■Applications: Humidification, small amount of fluid application.
■Applications: Humidification, small amount of fluid application.
Basic information
| Spray Shape | Annular Shape | Fluid | One-Fluid | Material | EN 1.4301 Equiv. |
|---|---|---|---|---|---|
| Type | One-Fluid Nozzles | Nominal Screw Dia. 1 | 2(R1/4) |
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Complementary Products
-
Air / Water / Hydraulic Manifold Block -T-Shaped Hole Type-
MISUMI Standard Price : 17.01 € Shipping Days: Same day
Tech Support
- Technical Support
- Tel：+49 69 668173-0 / FAX：+49 69 668173-360
- Technical Inquiry
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.