Cylinders with Twin Guides (MGCLF16-100)
Click on this image to zoom in.
Click on this image to zoom in.
- Volume Discount
Product Details:
Manufacturer part number: MGCLF16-100
Brand: MISUMI
Price: 161.46 €
Delivery time: 6 Days
Technical Data:
Cylinder I.D.: 16 Ø
Stroke (St): 100 mm
Bearing Type: Sliding Bearing
- Order quantities extended (D-JIT)
- Stock
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
MGCLF16-100
- Drawing / Specifications
- 3D Preview 3D preview is available after complete configuration
- Part Numbers
- Catalog
XX Section (ø50 only) (ø50 only) YY Section (ø50 only) Back Side [ ! ] Dowel Holes (X ± 0.02) are for ø50 cylinders only.
Specification Table
| Part Number | — | St Stroke |
| MGCLB16 MGCLFN12 | — — | 50 70 |
| Type | Features | ||
| Type | Plain Bushing | Linear Bushing | |
| Standard Stroke | MGCLF | MGCLB | Standard Stroke Type is available. |
| Spacer Installed Type | MGCLFN | MGCLBN | Intermediate strokes can be selected in 1 mm increments. (Spacer Fitted) |
| Tube I.D. (mm) | A | B | B1 | B2 | C | C1 | C2 | C3 | d | d1 | D | E | F | G | H1 | H2 | H3 | H4 | J1 | J2 | K1 | K2 | L | L1 |
| 12 | 58 | 26 | 18 | 8.5 | 22 | 14 | 6 | 6 | 4.3 | 8 | 6 | 56 | 48 | 41.5 | 4.5 | 9 | 7 | 10 | 11 | 15 | 12 | 12 | 39 | 29 |
| 16 | 64 | 30 | 22 | 10 | 25 | 16 | 7 | 7 | 4.3 | 8 | 8 | 62 | 52 | 46 | 4.5 | 11 | 7 | 10 | 11 | 17 | 11 | 13 | 43 | 31 |
| 20 | 85 | 36 | 26 | 11.5 | 30 | 18 | 8 | 10 | 5.2 | 9.5 | 10 | 72 | 60 | 55 | 5.5 | 13 | 7 | 12 | 12 | 23 | 11 | 14 | 47 | 35 |
| 25 | 96 | 42 | 32 | 13.5 | 38 | 26 | 8 | 8 | 5.2 | 9.5 | 12 | 86 | 70 | 65 | 5.5 | 15 | 9 | 12 | 11 | 23.5 | 12 | 13.5 | 47.5 | 35.5 |
| 32 | 116 | 51 | 38 | 16 | 48 | 30 | 11 | 10 | 6.8 | 11 | 16 | 112 | 96 | 80 | 6.5 | 18 | 11 | 16 | 11.5 | 25 | 12 | 16.5 | 47.5 | 33.5 |
| 50 | 148 | 64 | 46 | 21.5 | 60 | 40 | 12 | 12 | 8.6 | 14 | 20 | 146 | 130 | 110 | 9 | 22 | — | 20 | 14 | 11 | — | — | 72 | 44 |
| Tube I.D. (mm) | M | M1 | M2 | M3 | M4 | N | N1 | N2 | N3 | P | Q | R | S | T | V | W | ||
| Plain Bushing | Linear Bushing | |||||||||||||||||
| 12 | M4 × 0.7 | M5 × 0.8 | M4 × 0.7 | M4 × 0.7 | M5 × 0.8 | 23 | 5 | 20 | 4 + St | 8 | 6 | 40 | 2 | 50 | 8 | 19.5 | — | |
| 16 | M5 × 0.8 | M5 × 0.8 | M5 × 0.8 | M5 × 0.8 | M5 × 0.8 | 24 | 5 | 22 | 4 + St | 10 | 8 | 42 | 2 | 54 | 10 | 23 | — | |
| 20 | M5 × 0.8 | Rc1/8 | M5 × 0.8 | M5 × 0.8 | M6 × 1.0 | 28 | 19 | 16 | St | 12 | 10 | 52 | 2 | 64 | 10 | 24.5 | — | |
| 25 | M6 × 1.0 | Rc1/8 | M6 × 1.0 | M6 × 1.0 | M6 × 1.0 | 34 | 22 | 12.5 | 1 + St | 16 | 13 | 62 | 2 | 76 | 10 | 24 | — | |
| 32 | M8 × 1.25 | Rc1/8 | M8 × 1.25 | M8 × 1.25 | M8 × 1.25 | 42 | 22 | 14.5 | St - 3 | 20 | 16 | 80 | 2 | 100 | 12 | 31 | — | |
| 50 | St = 25 | M10 × 1.5 | Rc1/4 | M10 × 1.5 | — | M10 × 1.5 | 66 | 24 | 21 | 24 | 25 | — | 130 | 12 | — | 16 | 47 | 36 |
| St = 50 | 22 | 48 | 48 | |||||||||||||||
| St = 100 | 72 | 48 | 48 | |||||||||||||||
| Tube I.D. (mm) | X | Z | ZA | ZB | L2 Dimensions | |||||||||||||||
| St Stroke (mm) | ||||||||||||||||||||
| Plain Bushing | Linear Bushing Type | |||||||||||||||||||
| 10 | 20 | 25 | 30 | 40 | 50 | 75 | 100 | 10 | 20 | 25 | 30 | 40 | 50 | 75 | 100 | |||||
| 12 | — | — | — | — | 0 | 0 | — | 0 | 0 | 0 | 18 | 18 | 0 | 0 | — | 0 | 14 | 14 | 14 | 14 |
| 16 | — | — | — | — | 0 | 0 | — | 0 | 0 | 0 | 21 | 21 | 0 | 0 | — | 0 | 21 | 21 | 21 | 21 |
| 20 | — | — | — | — | — | 0 | — | 0 | 0 | 0 | 14 | 14 | — | 0 | — | 0 | 27 | 27 | 27 | 27 |
| 25 | — | — | — | — | — | 0 | — | 0 | 0 | 0 | 14 | 14 | — | 2 | — | 2 | 35 | 35 | 35 | 35 |
| 32 | — | — | — | — | — | — | 20 | — | — | 20 | 20 | 20 | — | — | 8 | — | — | 8 | 42 | 42 |
| 50 | 66 | 92 | 12 | 9 | — | — | 34.5 | — | — | 34.5 | — | 46 | — | — | — | — | — | — | — | — |
Example: For MGCLFN12-70
A 5 mm spacer is mounted into a Sliding Bearing Standard Stroke Type cylinder with a 12 mm I.D. and a 75 mm stroke.
* L2 = 18 mm.
* L1 + St will be 29 + 75 = 104 mm.
* All other external dimensions are the same as for MGCLF12-75.
| Part Number | St Stroke (mm) Selection | |||||||
| Type | Tube I.D. (mm) | |||||||
| (Slide Bearing) MGCLF Linear Bushing MGCLB | 12 | 10 | 20 | 30 | 40 | 50 | 75 | 100 |
| 16 | ||||||||
| 20 | 20 | 30 | 40 | 50 | 75 | 100 | ||
| 25 | ||||||||
| 32 | 25 | 50 | 75 | 100 | ||||
| ※50 | 25 | 50 | 100 | |||||
■Spacer Installed Type
| Part Number | St Stroke (mm) Spacer Fitted 1 mm Increments | |
| Type | Tube I.D. (mm) | |
| (Slide Bearing) MGCLFN Linear Bushing MGCLBN | 12 | 10 to 100 |
| 16 | ||
| 20 | 20 to 100 | |
| 25 | ||
| 32 | 25 to 100 | |
Attach a spacer that matches the stroke to the top of the internal piston. Stroke cannot be changed after purchase.
Alterations
| Alterations Code | Alteration Details | Applicable Conditions | Ordering Example |
| TC | Cold Weather Resistance Specification Usable in the ambient temperature range from -40°C to 60°C. Changes to low temp. resistant grease, low nitrile rubber. | [ ! ] Low temp. resistant sensors for cylinders are not available. | MGCLBN25-73-TC |
| TH | Heat Resistance Specification Usable in the ambient temperature range from 5°C to 120°C. Changes to heat resistant grease, fluororubber gaskets. Change the spacer material to EN AW−6063 Equiv.. | [ ! ] How temp. resistant sensors for cylinders are not available. | MGCLBN25-73-TH |
| Tube I.D. (mm) | Standard Stroke Table St Stroke (mm) | |||||||
| 10 | 20 | 25 | 30 | 40 | 50 | 75 | 100 | |
| 12 | ● | ● | - | ● | ● | ● | ● | ● |
| 16 | ● | ● | - | ● | ● | ● | ● | ● |
| 20 | - | ● | - | ● | ● | ● | ● | ● |
| 25 | - | ● | - | ● | ● | ● | ● | ● |
| 32 | - | - | ● | - | - | ● | ● | ● |
Part Number:
- In order to open the 3D preview, the part number must be fixed.
3D preview is not available, because the part number has not yet been determined.
Part Number
|
|---|
| MGCLF16-100 |
| Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | RoHS | Cylinder I.D. (Ø) | Stroke (St) (mm) | Bearing Type | |
|---|---|---|---|---|---|---|---|---|
161.46 € | 1 | Available | 6 Days | 10 | 16 | 100 | Sliding Bearing |
Loading...
Basic information
| Cylinder Operation Method | Double-Acting Type | Rod Operation Method | Single-Rod | Main Body Shape | With Guide |
|---|---|---|---|---|---|
| Additional Function | Standard | Environment, Applications | Standard | Operating Temperature Range(℃) | 5::60 |
| End Locking | Not Provided | Valves | Not Provided | Operating Pressure(MPa) | 0.1::1 |
This page is Cylinders with Twin Guides, part number MGCLF16-100.
You can find the detail information about specifications and dimensions on part number MGCLF16-100.
Configure
Basic Attributes
-
Type
- MGCLB
- MGCLBN
- MGCLF
- MGCLFN
-
Cylinder I.D.(Ø)
-
Stroke (St)(mm)
-
Bearing Type
- Linear Bushing
- Sliding Bearing
-
Filter by CAD data type
- 2D
- 3D
Filter by standard shipping days
-
- All
- Same day
- 6 Days or Less
- 24 Days or Less
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Variation of this product
| Part Number |
|---|
| MGCLB12-30 |
| MGCLB12-40 |
| MGCLB12-50 |
| MGCLF16-20 |
| MGCLF16-30 |
| MGCLF16-40 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Standard Shipping Days ? | RoHS | Cylinder I.D. (Ø) | Stroke (St) (mm) | Bearing Type |
|---|---|---|---|---|---|---|---|---|
176.83 € | 1 | Available | 6 Days | 10 | 12 | 30 | Linear Bushing | |
182.24 € | 1 | Available | 6 Days | 10 | 12 | 40 | Linear Bushing | |
187.66 € | 1 | Available | 6 Days | 10 | 12 | 50 | Linear Bushing | |
139.67 € | 1 | Available | 6 Days | 10 | 16 | 20 | Sliding Bearing | |
142.32 € | 1 | Available | 6 Days | 10 | 16 | 30 | Sliding Bearing | |
145.09 € | 1 | Available | 6 Days | 10 | 16 | 40 | Sliding Bearing |
Complementary Products
Tech Support
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.