• Brands
  • Company
  • Contact
EN / UK
Type Code Seach | *NOT READY*
#CODE
Keyword suggestions
Part number suggestions
Discontinued Products

Cartridge Heaters Items / Hot Plates

Cartridge Heaters Items / Hot Plates

Click on this image to zoom in.

Click on this image to zoom in.

MISUMI

MISUMI

This is a threaded heating plate. [Main body material]5052/EN 1.4305 Equiv. are available for selection.

Data sheet

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Hot Plates - Tapped Dimensional Drawing
No Tapped Holes
With Tapped Hole
" ! "S/2+2 ≤ G ≤ T- (S/2+2) A ≥ (N-1) ×P+D+4 (Except fot N = 1)
[ ! ] Unless otherwise specified, the dimension tolerance conforms to JIS B 0405 Class m.
TypeMaterial
Surface Treatment Code		 Material
HTPL
(No Tap)
HTPLT
(With Tap)		AEN AW−5052 Equiv.
SEN 1.4305 Equiv.

Specification Table

Part Number—Plate—Heater Hole—Sensor Hole—Heater Position—Sensor Position
                 
A—B—TD
(Diameter)		—N
(Qty.)		S
(Diameter)		—L
(Length)		P
(Pitch)		—Y
(from Bottom)		F
(from Left)		—G
(from Bottom)
HTPLA—200—200—30—D5—N6—S1.6—L30—P20—Y15—F100—G5
M2 Size Table
M1 Size Table
DM2
5·6M3 × 0.5
8 to 16M4 × 0.7
18M5 × 0.8
 
ABM1
50 to 10050 to 100M4 × 0.7 Depth 6
101 to 200M5 × 0.8 Depth 8
101 to 20050 to 100
101 to 200M6 × 1.0 Depth 10
Part NumberPlateHeater Hole (Selection)Sensor Hole (Selection)Heater PositionSensor Position
TypeMaterial
Symbol		ABTD
Selection		N
Qty.		S
Selection		L
1 mm Increments		PYFG
1 mm Increments1 mm Increments1 mm Increments
HTPL

HTPLT		A

S		50 to 20050 to 20012 to 305

6

8

10

12

14

16

18		1 to 101.610 to 30




8 to 191
When N = 1, P is the distance from left end.		6 to 254 to 1974 to 27
2.310 to 100
3.2
4.8
The distance from the upper, lower or side plate end faces to the heater/sensor holes and tapped hole should be 2 mm or more.
The distance between all holes (between heater holes, between heater holes and sensor holes, or between heater/sensor holes and tapped holes) should be 2 mm or more. M1 tapped holes (pilot holes) may go through when the T dimension is 15 mm or less.
It is recommended to establish the distance between heaters (P) 3 to 4 times larger than the heater diameter (D). (If the distance between heaters is too small, the heating may accumulate in the plate and heating unevenness may occur.)
Part NumberMaterial
Symbol		AB 
HTPLHTPLT·HTPC
T10 to 20T21 to 30T10 to 20T21 to 30
Hot Plates
HTPL

HTPLT

Cooling Plates
HTPC		A50 to 100 50 to 100     
101 to 150     
151 to 200     
101 to 150 50 to 100     
101 to 150     
151 to 200     
151 to 200 50 to 100     
101 to 150     
151 to 200     
S50 to 100 50 to 100     
101 to 150     
151 to 200     
101 to 150 50 to 100     
101 to 150     
151 to 200     
151 to 200 50 to 100     
101 to 150     
151 to 200     

Product Overview

■ Product Overview

  • No tapped on heater holes (D diameter).
  • When shipped, there may be residual machining oil, etc. Before use, remove any oil, etc., and insert the heater.
 

■ Accuracy Standards

  • Thickness Parallelism: 0.015 or less per 100 mm
  • Flatness
T10 to 1516 to 2526 or More
Per 100 mm0.030.0150.012
 
  • Dimensional tolerance of A and B
99 mm or Less100 to 200
±0.2±0.3
 
  • T Dimension Tolerance: ±0.1
  • Circumference Chamfering: C0.2 to C1.0

App. Example

 
Hot Plates - Tapped Related Image 1_App. Example
 

·When installing the cartridge heater, make the clearance with heater holes as small as possible.
 Recommended clearance of hole machining is 0.05 or less (one side).
 * The degree of adherence between a heater and heated object affects the life of heater.
  Also, a large clearance increases the time needed to raise the temperature and creates a slow response speed for temperature control.

Data to be displayed
30
45
60
  1. 1
Part Number
HTPLA-[50-200/1]-[50-200/1]-[12-30/1]-D[5,​6,​8,​10,​12,​14,​16,​18]-N[1,​2,​3,​4,​5,​6,​7,​8,​9,​10]-S[1.6,​2.3,​3.2,​4.8]-L[10-100/1]-P[8-191/1]-Y[5-25/1]-F[3-197/1]-G[3-27/1]
HTPLS-[50-200/1]-[50-200/1]-[12-30/1]-D[5,​6,​8,​10,​12,​14,​16,​18]-N[1,​2,​3,​4,​5,​6,​7,​8,​9,​10]-S[1.6,​2.3,​3.2,​4.8]-L[10-100/1]-P[8-191/1]-Y[5-25/1]-F[3-197/1]-G[3-27/1]
HTPLTA-[50-200/1]-[50-200/1]-[12-30/1]-D[5,​6,​8,​10,​12,​14,​16,​18]-N[1,​2,​3,​4,​5,​6,​7,​8,​9,​10]-S[1.6,​2.3,​3.2,​4.8]-L[10-100/1]-P[8-191/1]-Y[5-25/1]-F[3-197/1]-G[4-27/1]
HTPLTS-[50-200/1]-[50-200/1]-[12-30/1]-D[5,​6,​8,​10,​12,​14,​16,​18]-N[1,​2,​3,​4,​5,​6,​7,​8,​9,​10]-S[1.6,​2.3,​3.2,​4.8]-L[10-100/1]-P[8-191/1]-Y[5-25/1]-F[3-197/1]-G[3-27/1]
Part NumberMinimum order quantityVolume Discount
Standard
Shipping Days
?
RoHSBody Material With or w/o Tap A
(mm) 		B
(mm) 		Heater Hole Dia. [D]
(mm) 		Heater Position (Pitch) [P]
(mm) 		Heater Position [Y]
(mm) 		Number of Heater Holes [N] Sensor Hole Depth [L]
(mm) 		Sensor Hole Dia. [S]
(mm) 		Sensor Position [F]
(mm) 		Sensor Position [G]
(mm) 		T
(mm)
1 9 Days 10EN AW-5052 Equiv.No Tapped Holes50 ～ 20050 ～ 2005 ～ 188 ～ 1915 ～ 251 ～ 1010 ～ 1001.6 ～ 4.83 ～ 1973 ～ 2712 ～ 30
1 9 Days 10EN 1.4305 Equiv.No Tapped Holes50 ～ 20050 ～ 2005 ～ 188 ～ 1915 ～ 251 ～ 1010 ～ 1001.6 ～ 4.83 ～ 1973 ～ 2712 ～ 30
1 9 Days 10EN AW-5052 Equiv.With Tapped Hole50 ～ 20050 ～ 2005 ～ 188 ～ 1915 ～ 251 ～ 1010 ～ 1001.6 ～ 4.83 ～ 1974 ～ 2712 ～ 30
1 9 Days 10EN 1.4305 Equiv.With Tapped Hole50 ～ 20050 ～ 2005 ～ 188 ～ 1915 ～ 251 ～ 1010 ～ 1001.6 ～ 4.83 ～ 1973 ～ 2712 ～ 30

Loading...

  1. 1
 

Basic information

Category Mounting Components Plate Type Hot Plates

Configure

Clear all

4Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.
The part number is completed.

Basic Attributes

  • Body Material

    • EN AW-5052 Equiv.
    • EN 1.4305 Equiv.

    Clear

  • With or w/o Tap

    • No Tapped Holes
    • With Tapped Hole

    Clear

  • A(mm)

     [50-200/1mm Unit(s)]

    Clear

  • B(mm)

     [50-200/1mm Unit(s)]

    Clear

  • Heater Hole Dia. [D](mm)

    • 5
    • 6
    • 8
    • 10
    • 12
    • 14
    • 16
    • 18

    Clear

  • Heater Position (Pitch) [P](mm)

     [8-191/1mm Unit(s)]

    Clear

  • Heater Position [Y](mm)

     [5-25/1mm Unit(s)]

    Clear

  • Number of Heater Holes [N]

    • 1
    • 2
    • 3
    • 4
    • 5
    • 6
    • 7
    • 8
    • 9
    • 10

    Clear

  • Sensor Hole Depth [L](mm)

     [10-100/1mm Unit(s)]

    Clear

  • Sensor Hole Dia. [S](mm)

    • 1.6
    • 2.3
    • 3.2
    • 4.8

    Clear

  • Sensor Position [F](mm)

     [3-197/1mm Unit(s)]

    Clear

  • Sensor Position [G](mm)

     [3-27/1mm Unit(s)]

    Clear

  • T(mm)

     [12-30/1mm Unit(s)]

    Clear

  • Type

    • HTPLA
    • HTPLS
    • HTPLTA
    • HTPLTS

    Clear

Filter by standard shipping days

    • All
    • 9 Days or Less

    Reset

Optional Attributes

Tech Support

Technical Support
Tel：+49 69 668173-0 / FAX：+49 69 668173-360
Technical Inquiry

Payment Method

  • Payment on account
  • Pre Payment
  • PayPal

On-Demand Manufacturing

Change View

Certificates

  • ISO-9001
  • ISO-14001
  • AEO Certification
  • RoHS
  • REACH

MISUMI worldwide

Social Media

Legal notice

Copyright © MISUMI Corporation All Rights Reserved.