• Brands
  • Company
  • Contact
EN / UK
Type Code Seach | *NOT READY*
#CODE
Keyword suggestions
Part number suggestions
Discontinued Products

Pulley / Flanged / Crowned / Press-fit Urethane / Width: 6~32

Pulley / Flanged / Crowned / Press-fit Urethane / Width: 6~32

MISUMI

MISUMI

Data sheet

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Flanged

Crowned

Shaft Hole Specifications Straight Bore + Tap New JIS Keyway + Tap

Press-Fit Urethane Type

■Keyway Dimensions
N: New JIS (B1301) Keyway Dimensions
NominaldH7bJS9t Tolerance
N88+0.015
0   		3±0.01251.4+0.1
0
N1010
NK10104±0.01501.8
N1212+0.018
0   
N151552.3
N2020+0.021
0   		62.8
N30308±0.01803.3+0.2
0
N4040+0.025
0   		12±0.0215

[!] Unless otherwise specified, the dimension tolerance conforms to JIS B 0405 Class m. Excluding Urethane Part.
[!] Shore A70 (Blue) Urethane is press-fit on Roller surface. D dimension does not change. Urethane Thickness 1 mm
[!] Set screws are not included.
Type[M] Material[S] Surface Treatment
FlangedCrownedPress-Fit UrethaneLining
HBPGHBPCG—EN 1.1191 Equiv.Black Oxide
HBPMHBPCMElectroless Nickel Plating
HBPAHBPCA2000 Series Aluminum AlloyClear Anodize
HBPSHBPCSEN 1.4301 Equiv.—
——HBPUSUrethane Shore A70

Specification Table

Part Number—P—N—T
HBPM30
HBPCG35		—P6
—
NK10		—
—		11
32
Part NumberdH7TD1ℓℓ1ML
TypeDP (Straight Bore + Tap) SelectionN (Keyway + Tap) SelectionSelection
Flanged
HBPG
HBPM
HBPA
HBPS
Crowned
HBPCG
HBPCM
HBPCA
HBPCS
Press-Fit Urethane Type
HBPUS		1556       — 6*
11
16
21
27
32		12843T+2
18568      —16
20568      8      
28 6810     8      
30 681012    81012    20
35  81012     1012    
40  81012     1012    
45   1012     1012    301265
50   1012     1012    
60   101215    101215   
80     152030    152030 501688
100      203040    20304060
[NG]*T = 6 is not available for Crowned. [!] Specify NK10 when Keyway + Tap with shaft bore dia. 10 and keyway width 4.0 mm (height 1.8 mm) is desired.
[!] Urethane cannot be ordered as a single item.
Unspecified Dimension Tolerance
(Excluding Urethane Part)
Dimension RangeTolerance
(mm)
OverOr Less
0.53±0.1
36±0.1
630±0.2
30120±0.3
[!] Compliant with JIS B 0405 m (Medium Class).

Alterations

Part Number—P·N—T—(BC·HRC·FC·TC)
HBPM18—P8—11—BC6.5
AlterationsHub CutParallel KnurlingFlange CutFlange Thickness
CodeBCHRCFCTC
Spec.
Cuts the hub length in 0.5 mm increments.
[ ! ]M+3 ≤ BC ≤ ℓ
Ordering Code BC6.5
Machines parallel knurling on the roller section.
　
[ ! ] Applicable to HBPG, HBPM, HBPA, and HBPS
Lowers the flange by cutting.
FC: 0.5 mm Increments
[ ! ]D ≤ FC < D+4
Ordering Code FC42

[NG] Not applicable to Crowned

Machines flange thickness to 0.5mm.
L dimension becomes 1 mm shorter.

[NG] Not applicable to Crowned

Part Number:  

    3D preview is not available, because the part number has not yet been determined.

  • In order to open the 3D preview, the part number must be fixed.
Loading...

Plug-in is required for 3D Preview

CAD Download

Data to be displayed
30
45
60
  1. 1
Part Number
HBPUS15-P[5,​6]-[6,​11,​16,​21,​27,​32]
HBPUS18-P[5,​6,​8]-[6,​11,​16,​21,​27,​32]
HBPUS20-N8-[6,​11,​16,​21,​27,​32]
HBPUS20-P[5,​6,​8]-[6,​11,​16,​21,​27,​32]
HBPUS28-N8-[6,​11,​16,​21,​27,​32]
HBPUS28-P[6,​8,​10]-[6,​11,​16,​21,​27,​32]
HBPUS30-N[8,​10,​12]-[6,​11,​16,​21,​27,​32]
HBPUS30-NK10-[6,​11,​16,​21,​27,​32]
HBPUS30-P[6,​8,​10,​12]-[6,​11,​16,​21,​27,​32]
HBPUS35-N[10,​12]-[6,​11,​16,​21,​27,​32]
HBPUS35-NK10-[6,​11,​16,​21,​27,​32]
HBPUS35-P[8,​10,​12]-[6,​11,​16,​21,​27,​32]
HBPUS40-N[10,​12]-[6,​11,​16,​21,​27,​32]
HBPUS40-NK10-[6,​11,​16,​21,​27,​32]
HBPUS40-P[8,​10,​12]-[6,​11,​16,​21,​27,​32]
HBPUS45-N[10,​12]-[6,​11,​16,​21,​27,​32]
HBPUS45-NK10-[6,​11,​16,​21,​27,​32]
HBPUS45-P[10,​12]-[6,​11,​16,​21,​27,​32]
HBPUS50-N[10,​12]-[6,​11,​16,​21,​27,​32]
HBPUS50-NK10-[6,​11,​16,​21,​27,​32]
HBPUS50-P[10,​12]-[6,​11,​16,​21,​27,​32]
HBPUS60-N[10,​12,​15]-[6,​11,​16,​21,​27,​32]
HBPUS60-NK10-[6,​11,​16,​21,​27,​32]
HBPUS60-P[10,​12,​15]-[6,​11,​16,​21,​27,​32]
HBPUS80-N[15,​20,​30]-[6,​11,​16,​21,​27,​32]
HBPUS80-P[15,​20,​30]-[6,​11,​16,​21,​27,​32]
HBPUS100-N[20,​30,​40]-[6,​11,​16,​21,​27,​32]
HBPUS100-P[20,​30,​40]-[6,​11,​16,​21,​27,​32]
Part NumberMinimum order quantityVolume Discount
Standard
Shipping Days
?
RoHSWith or w/o Flange Shape Surface Urethane Material O.D. D
(Ø) 		T Selection
(mm) 		Surface Treatment Flange Shape Urethane Hardness
(mm) 		Shaft (Bore) Dia. d (mm): Round Hole + Tap [P] Shaft (Bore) Dia. d (mm): New JIS Keyway + Tap [N]
1 9 Days 10FlangedStraightUrethane ProvidedEN 1.4301 Equiv.156 ～ 32Not ProvidedStandardShore A705 ～ 6-
1 9 Days 10FlangedStraightUrethane ProvidedEN 1.4301 Equiv.186 ～ 32Not ProvidedStandardShore A705 ～ 8-
1 9 Days 10FlangedStraightUrethane ProvidedEN 1.4301 Equiv.206 ～ 32Not ProvidedStandardShore A70-8
1 9 Days 10FlangedStraightUrethane ProvidedEN 1.4301 Equiv.206 ～ 32Not ProvidedStandardShore A705 ～ 8-
1 9 Days 10FlangedStraightUrethane ProvidedEN 1.4301 Equiv.286 ～ 32Not ProvidedStandardShore A70-8
1 9 Days 10FlangedStraightUrethane ProvidedEN 1.4301 Equiv.286 ～ 32Not ProvidedStandardShore A706 ～ 10-
1 11 Days 10FlangedStraightUrethane ProvidedEN 1.4301 Equiv.306 ～ 32Not ProvidedStandardShore A70-8 ～ 12
1 11 Days 10FlangedStraightUrethane ProvidedEN 1.4301 Equiv.306 ～ 32Not ProvidedStandardShore A70-10
1 11 Days 10FlangedStraightUrethane ProvidedEN 1.4301 Equiv.306 ～ 32Not ProvidedStandardShore A706 ～ 12-
1 9 Days 10FlangedStraightUrethane ProvidedEN 1.4301 Equiv.356 ～ 32Not ProvidedStandardShore A70-10 ～ 12
1 9 Days 10FlangedStraightUrethane ProvidedEN 1.4301 Equiv.356 ～ 32Not ProvidedStandardShore A70-10
1 9 Days 10FlangedStraightUrethane ProvidedEN 1.4301 Equiv.356 ～ 32Not ProvidedStandardShore A708 ～ 12-
1 11 Days 10FlangedStraightUrethane ProvidedEN 1.4301 Equiv.406 ～ 32Not ProvidedStandardShore A70-10 ～ 12
1 11 Days 10FlangedStraightUrethane ProvidedEN 1.4301 Equiv.406 ～ 32Not ProvidedStandardShore A70-10
1 11 Days 10FlangedStraightUrethane ProvidedEN 1.4301 Equiv.406 ～ 32Not ProvidedStandardShore A708 ～ 12-
1 9 Days 10FlangedStraightUrethane ProvidedEN 1.4301 Equiv.456 ～ 32Not ProvidedStandardShore A70-10 ～ 12
1 9 Days 10FlangedStraightUrethane ProvidedEN 1.4301 Equiv.456 ～ 32Not ProvidedStandardShore A70-10
1 9 Days 10FlangedStraightUrethane ProvidedEN 1.4301 Equiv.456 ～ 32Not ProvidedStandardShore A7010 ～ 12-
1 11 Days 10FlangedStraightUrethane ProvidedEN 1.4301 Equiv.506 ～ 32Not ProvidedStandardShore A70-10 ～ 12
1 11 Days 10FlangedStraightUrethane ProvidedEN 1.4301 Equiv.506 ～ 32Not ProvidedStandardShore A70-10
1 11 Days 10FlangedStraightUrethane ProvidedEN 1.4301 Equiv.506 ～ 32Not ProvidedStandardShore A7010 ～ 12-
1 11 Days 10FlangedStraightUrethane ProvidedEN 1.4301 Equiv.606 ～ 32Not ProvidedStandardShore A70-10 ～ 15
1 11 Days 10FlangedStraightUrethane ProvidedEN 1.4301 Equiv.606 ～ 32Not ProvidedStandardShore A70-10
1 11 Days 10FlangedStraightUrethane ProvidedEN 1.4301 Equiv.606 ～ 32Not ProvidedStandardShore A7010 ～ 15-
1 9 Days 10FlangedStraightUrethane ProvidedEN 1.4301 Equiv.806 ～ 32Not ProvidedStandardShore A70-15 ～ 30
1 9 Days 10FlangedStraightUrethane ProvidedEN 1.4301 Equiv.806 ～ 32Not ProvidedStandardShore A7015 ～ 30-
1 9 Days 10FlangedStraightUrethane ProvidedEN 1.4301 Equiv.1006 ～ 32Not ProvidedStandardShore A70-20 ～ 40
1 9 Days 10FlangedStraightUrethane ProvidedEN 1.4301 Equiv.1006 ～ 32Not ProvidedStandardShore A7020 ～ 40-

Loading...

  1. 1
 

Basic information

Type Pulleys Length L(mm) Up to 50 Shaft Type Round Hole

Configure

Clear all

28Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.
The part number is completed.

Basic Attributes

  • With or w/o Flange

    • Flanged
    • No Flange

    Clear

  • Shape

    • Straight
    • Crowned

    Clear

  • Material

    • Steel
      • EN 1.1191 Equiv.
    • Aluminum
      • Aluminum Alloy 2000 series
    • EN 1.4301 Equiv.

    Clear

  • O.D. D(Ø)

    • 15
    • 18
    • 20
    • 28
    • 30
    • 35
    • 40
    • 45
    • 50
    • 60
    • 80
    • 100

    Clear

  • T Selection(mm)

    • 6
    • 11
    • 16
    • 21
    • 27
    • 32

    Clear

  • Surface Treatment

    • Not Provided
    • Black Oxide
    • Electroless Nickel Plating
    • Clear Anodized Aluminum

    Clear

  • Flange Shape

    • Standard

    Clear

  • Urethane Hardness(mm)

    • Shore A70

    Clear

  • Shaft (Bore) Dia. d (mm): Round Hole + Tap [P]

    • 5
    • 6
    • 8
    • 10
    • 12
    • 15
    • 20
    • 30
    • 40

    Clear

  • Shaft (Bore) Dia. d (mm): New JIS Keyway + Tap [N]

    • 8
    • 10
    • 12
    • 15
    • 20
    • 30
    • 40

    Clear

  • Type

    • HBPA
    • HBPCA
    • HBPCG
    • HBPCM
    • HBPCS
    • HBPG
    • HBPM
    • HBPS
    • HBPUS

    Clear

  • Surface Urethane

    • Urethane Provided
    • Urethane Not Provided

    Clear

  • Filter by CAD data type

    • 2D
    • 3D

    Clear

Filter by standard shipping days

    • All
    • 9 Days or Less
    • 11 Days or Less

    Reset

Optional Attributes

Complementary Products

Tech Support

Technical Support
Tel：+49 69 668173-0 / FAX：+49 69 668173-360
Technical Inquiry

Payment Method

  • Payment on account
  • Pre Payment
  • PayPal

On-Demand Manufacturing

Change View

Certificates

  • ISO-9001
  • ISO-14001
  • AEO Certification
  • RoHS
  • REACH

MISUMI worldwide

Social Media

Legal notice

Copyright © MISUMI Corporation All Rights Reserved.