• Brands
  • Company
  • Contact
EN / UK
Type Code Seach | *NOT READY*
#CODE
Keyword suggestions
Part number suggestions
Discontinued Products

Pulley / Centering Groove / Crowned / Width: 110~500

Pulley / Centering Groove / Crowned / Width: 110~500

MISUMI

MISUMI

Data sheet

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

■Keyway Shape Crowned
ROBAWC·ROBMWC·ROBSWC Crosspiece Groove Straight
ROBAWM·ROBMWM·ROBSWM Crosspiece Groove Part [ ! ]X ≥ Y

[!] For Crosspiece Groove Part Dimensions, see "Pulley, Idler Relief Dimensions."
■New JIS (B1301) Keyway Dimensions
NominaldH9bJS9t Tolerance
N88+0.036
0    		3±0.01251.4+0.1
0
N1010
NK10104±0.01501.8
N1212+0.043
0    
N151552.3
N2020+0.052
0    		62.8
N25258±0.01803.3+0.2
0
N3030
N3535+0.062
0    		10
Type[M] Material[S] Surface Treatment
CrownedCrosspiece Groove StraightPulleyPress Fit Bushing
ROBAWCROBAWMAluminum AlloyAluminum AlloyClear Anodize
ROBMWCROBMWMEN 1.0480 Equiv.EN 1.1191 Equiv.Electroless Nickel Plating
ROBSWCROBSWMEN 1.4301 Equiv.EN 1.4301 Equiv.—
[ ! ]Set screws are not included.
*1 Since the drawing surface of pipe is unpolished, the Inner Dia. d1 is misshapen to some extent.

Specification Table

■CrownedPart Number—d—L—H
 ROBAWC30—10—L350—H1.0
 ROBMWC35—N10—L300—H0.5
 ROBSWC50—N15—L400—H0.5
 
■Crosspiece Groove
Straight		Part Number—d—L—X—Y—Z
ROBAWM60—25—L250—X14.0—Y11.8—Z5.0
 ROBMWM50—20—L350—X13.0—Y11.5—Z6.0
 ROBSWM50—25—L400—X12.0—Y10.0—Z6.0
Part NumberdH91 mm IncrementsH Selection0.1 mm IncrementsK[ ! ] d1D1M (Coarse)
TypeDStraight Bore + TapKeyway + TapLL = 110 to 300L = 310 to 510XYZKey LengthAluminum
Alloy		Steel
(EN 1.0480 Equiv.)		Stainless Steel
(EN 1.4301 Equiv.)		Straight Bore + TapKeyway + Tap
Crowned
ROBAWC
ROBMWC
ROBSWC

Crosspiece Groove Straight
ROBAWM
ROBMWM
ROBSWM		308N8110 to 5100.3


0.5


0.8 		0.5


0.8


1.0


1.2		7.0 to 15.05.0 to 12.02.0 to 4.5251515.81822M4M3
10N10 · NK10
12N1230
3510N104.0 to 6.0251718.11827M4M3
12N1230
15N15
4012N124.0 to 7.0301718.72033M4M3
15N15M4
20N204.0 to 6.02222.722M5
5015N154.0 to 7.017302840M5M4
20N2022M5
25N2527M6
(60)20N2022  45M6M5
25N2532——M6
30N30  
(80)25N2541  55M8M6
30N30——
35N35  M8
[!] D = (60) or (80) is applicable only for the Aluminum Alloy material. [!] For Crosspiece Groove Straight with D = 30 or 35, only Aluminum Alloy is available as the material. [!] Specify NK10 when Keyway + Tap with shaft bore dia. 10 and keyway width 4.0 mm (height 1.8 mm) is desired.
Unspecified Dimension Tolerance
(Excluding d1)
Dimension RangeTolerance
(mm)
OverOr Less
0.53±0.1
36±0.1
630±0.2
30120±0.3
[!] Compliant with JIS B 0405 m (Medium Class).

Part Number:  

    3D preview is not available, because the part number has not yet been determined.

  • In order to open the 3D preview, the part number must be fixed.
Loading...

Plug-in is required for 3D Preview

CAD Download

Data to be displayed
30
45
60
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. Next >>
Part Number
ROBAWC30-[8,​10,​12]-L[110-510/1]-H[0.3,​0.5,​0.8,​1,​1.2]
ROBAWC30-N8-L[110-500/10]-H[0.3,​0.5,​0.8,​1,​1.2]
ROBAWC30-N8-L[110-510/1]-H[0.3,​0.5,​0.8,​1,​1.2]
ROBAWC30-N10-L[110-500/10]-H[0.3,​0.5,​0.8,​1,​1.2]
ROBAWC30-N10-L[110-510/1]-H[0.3,​0.5,​0.8,​1,​1.2]
ROBAWC30-N12-L[110-500/10]-H[0.3,​0.5,​0.8,​1,​1.2]
ROBAWC30-N12-L[110-510/1]-H[0.3,​0.5,​0.8,​1,​1.2]
ROBAWC30-NK10-L[110-500/10]-H[0.3,​0.5,​0.8,​1,​1.2]
ROBAWC30-NK10-L[110-510/1]-H[0.3,​0.5,​0.8,​1,​1.2]
ROBAWC35-[10,​12,​15]-L[110-500/10]-H[0.3,​0.5,​0.8,​1,​1.2]
ROBAWC35-[10,​12,​15]-L[110-510/1]-H[0.3,​0.5,​0.8,​1,​1.2]
ROBAWC35-N10-L[110-500/10]-H[0.3,​0.5,​0.8,​1,​1.2]
ROBAWC35-N10-L[110-510/1]-H[0.3,​0.5,​0.8,​1,​1.2]
ROBAWC35-N12-L[110-500/10]-H[0.3,​0.5,​0.8,​1,​1.2]
ROBAWC35-N12-L[110-510/1]-H[0.3,​0.5,​0.8,​1,​1.2]
ROBAWC35-N15-L[110-500/10]-H[0.3,​0.5,​0.8,​1,​1.2]
ROBAWC35-N15-L[110-510/1]-H[0.3,​0.5,​0.8,​1,​1.2]
ROBAWC40-[12,​15,​20]-L[110-500/10]-H[0.3,​0.5,​0.8,​1,​1.2]
ROBAWC40-[12,​15,​20]-L[110-510/1]-H[0.3,​0.5,​0.8,​1,​1.2]
ROBAWC40-N12-L[110-500/10]-H[0.3,​0.5,​0.8,​1,​1.2]
ROBAWC40-N12-L[110-510/1]-H[0.3,​0.5,​0.8,​1,​1.2]
ROBAWC40-N15-L[110-500/10]-H[0.3,​0.5,​0.8,​1,​1.2]
ROBAWC40-N15-L[110-510/1]-H[0.3,​0.5,​0.8,​1,​1.2]
ROBAWC40-N20-L[110-500/10]-H[0.3,​0.5,​0.8,​1,​1.2]
ROBAWC40-N20-L[110-510/1]-H[0.3,​0.5,​0.8,​1,​1.2]
ROBAWC50-[15,​20,​25]-L[110-500/10]-H[0.3,​0.5,​0.8,​1,​1.2]
ROBAWC50-[15,​20,​25]-L[110-510/1]-H[0.3,​0.5,​0.8,​1,​1.2]
ROBAWC50-N15-L[110-500/10]-H[0.3,​0.5,​0.8,​1,​1.2]
ROBAWC50-N15-L[110-510/1]-H[0.3,​0.5,​0.8,​1,​1.2]
ROBAWC50-N20-L[110-500/10]-H[0.3,​0.5,​0.8,​1,​1.2]
ROBAWC50-N20-L[110-510/1]-H[0.3,​0.5,​0.8,​1,​1.2]
ROBAWC50-N25-L[110-500/10]-H[0.3,​0.5,​0.8,​1,​1.2]
ROBAWC50-N25-L[110-510/1]-H[0.3,​0.5,​0.8,​1,​1.2]
ROBAWC60-[20,​25,​30]-L[110-500/10]-H[0.3,​0.5,​0.8,​1,​1.2]
ROBAWC60-[20,​25,​30]-L[110-510/1]-H[0.3,​0.5,​0.8,​1,​1.2]
ROBAWC60-N20-L[110-500/10]-H[0.3,​0.5,​0.8,​1,​1.2]
ROBAWC60-N20-L[110-510/1]-H[0.3,​0.5,​0.8,​1,​1.2]
ROBAWC60-N25-L[110-500/10]-H[0.3,​0.5,​0.8,​1,​1.2]
ROBAWC60-N25-L[110-510/1]-H[0.3,​0.5,​0.8,​1,​1.2]
ROBAWC60-N30-L[110-500/10]-H[0.3,​0.5,​0.8,​1,​1.2]
ROBAWC60-N30-L[110-510/1]-H[0.3,​0.5,​0.8,​1,​1.2]
ROBAWC80-[25,​30,​35]-L[110-500/10]-H[0.3,​0.5,​0.8,​1,​1.2]
ROBAWC80-[25,​30,​35]-L[110-510/1]-H[0.3,​0.5,​0.8,​1,​1.2]
ROBAWC80-N25-L[110-500/10]-H[0.3,​0.5,​0.8,​1,​1.2]
ROBAWC80-N25-L[110-510/1]-H[0.3,​0.5,​0.8,​1,​1.2]
ROBAWC80-N30-L[110-500/10]-H[0.3,​0.5,​0.8,​1,​1.2]
ROBAWC80-N30-L[110-510/1]-H[0.3,​0.5,​0.8,​1,​1.2]
ROBAWC80-N35-L[110-500/10]-H[0.3,​0.5,​0.8,​1,​1.2]
ROBAWC80-N35-L[110-510/1]-H[0.3,​0.5,​0.8,​1,​1.2]
ROBAWM30-[8,​10,​12]-L[110-500/10]-X[7-15/0.1]-Y[5-12/0.1]-Z[2-4.5/0.1]
ROBAWM30-[8,​10,​12]-L[110-510/1]-X[7-15/0.1]-Y[5-12/0.1]-Z[2-4.5/0.1]
ROBAWM30-N8-L[110-500/10]-X[7-15/0.1]-Y[5-12/0.1]-Z[2-4.5/0.1]
ROBAWM30-N8-L[110-510/1]-X[7-15/0.1]-Y[5-12/0.1]-Z[2-4.5/0.1]
ROBAWM30-N10-L[110-500/10]-X[7-15/0.1]-Y[5-12/0.1]-Z[2-4.5/0.1]
ROBAWM30-N10-L[110-510/1]-X[7-15/0.1]-Y[5-12/0.1]-Z[2-4.5/0.1]
ROBAWM30-N12-L[110-500/10]-X[7-15/0.1]-Y[5-12/0.1]-Z[2-4.5/0.1]
ROBAWM30-N12-L[110-510/1]-X[7-15/0.1]-Y[5-12/0.1]-Z[2-4.5/0.1]
ROBAWM30-NK10-L[110-500/10]-X[7-15/0.1]-Y[5-12/0.1]-Z[2-4.5/0.1]
ROBAWM30-NK10-L[110-510/1]-X[7-15/0.1]-Y[5-12/0.1]-Z[2-4.5/0.1]
ROBAWM35-[10,​12,​15]-L[110-500/10]-X[7-15/0.1]-Y[5-12/0.1]-Z[4-6/0.1]
Part Number
Standard Unit Price
Minimum order quantityVolume Discount
Standard
Shipping Days
?
RoHSShape Material O.D. D
(Ø) 		Surface Treatment Shaft (Bore) Dia. d
(mm) 		Shaft Hole Specifications Keyway Width b
(mm) 		H
(mm) 		L
(mm) 		X
(mm) 		Y
(mm) 		Z
(mm)

-

1 9 Days 10Crowned[Aluminum] Aluminum Alloy 5000 series30Clear Anodized Aluminum8 ～ 12Round Hole + Tap-0.3 ～ 1.2110 ～ 510---

-

1 9 Days 10Crowned[Aluminum] Aluminum Alloy 5000 series30Clear Anodized Aluminum8New JIS Keyway + Tap-0.3 ～ 1.2110 ～ 500---

-

1 9 Days 10Crowned[Aluminum] Aluminum Alloy 5000 series30Clear Anodized Aluminum8New JIS Keyway + Tap-0.3 ～ 1.2110 ～ 510---

-

1 9 Days 10Crowned[Aluminum] Aluminum Alloy 5000 series30Clear Anodized Aluminum10New JIS Keyway + Tap30.3 ～ 1.2110 ～ 500---

-

1 9 Days 10Crowned[Aluminum] Aluminum Alloy 5000 series30Clear Anodized Aluminum10New JIS Keyway + Tap30.3 ～ 1.2110 ～ 510---

-

1 9 Days 10Crowned[Aluminum] Aluminum Alloy 5000 series30Clear Anodized Aluminum12New JIS Keyway + Tap-0.3 ～ 1.2110 ～ 500---

-

1 9 Days 10Crowned[Aluminum] Aluminum Alloy 5000 series30Clear Anodized Aluminum12New JIS Keyway + Tap-0.3 ～ 1.2110 ～ 510---

-

1 9 Days 10Crowned[Aluminum] Aluminum Alloy 5000 series30Clear Anodized Aluminum10New JIS Keyway + Tap40.3 ～ 1.2110 ～ 500---

-

1 9 Days 10Crowned[Aluminum] Aluminum Alloy 5000 series30Clear Anodized Aluminum10New JIS Keyway + Tap40.3 ～ 1.2110 ～ 510---

-

1 9 Days 10Crowned[Aluminum] Aluminum Alloy 5000 series35Electroless Nickel Plating10 ～ 15Round Hole + Tap-0.3 ～ 1.2110 ～ 500---

-

1 9 Days 10Crowned[Aluminum] Aluminum Alloy 5000 series35Electroless Nickel Plating10 ～ 15Round Hole + Tap-0.3 ～ 1.2110 ～ 510---

-

1 9 Days 10Crowned[Aluminum] Aluminum Alloy 5000 series35Electroless Nickel Plating10New JIS Keyway + Tap30.3 ～ 1.2110 ～ 500---

-

1 9 Days 10Crowned[Aluminum] Aluminum Alloy 5000 series35Electroless Nickel Plating10New JIS Keyway + Tap30.3 ～ 1.2110 ～ 510---

-

1 9 Days 10Crowned[Aluminum] Aluminum Alloy 5000 series35Electroless Nickel Plating12New JIS Keyway + Tap-0.3 ～ 1.2110 ～ 500---

-

1 9 Days 10Crowned[Aluminum] Aluminum Alloy 5000 series35Electroless Nickel Plating12New JIS Keyway + Tap-0.3 ～ 1.2110 ～ 510---

-

1 9 Days 10Crowned[Aluminum] Aluminum Alloy 5000 series35Electroless Nickel Plating15New JIS Keyway + Tap-0.3 ～ 1.2110 ～ 500---

-

1 9 Days 10Crowned[Aluminum] Aluminum Alloy 5000 series35Electroless Nickel Plating15New JIS Keyway + Tap-0.3 ～ 1.2110 ～ 510---

-

1 9 Days 10Crowned[Aluminum] Aluminum Alloy 5000 series40Clear Anodized Aluminum12 ～ 20Round Hole + Tap-0.3 ～ 1.2110 ～ 500---

-

1 9 Days 10Crowned[Aluminum] Aluminum Alloy 5000 series40Clear Anodized Aluminum12 ～ 20Round Hole + Tap-0.3 ～ 1.2110 ～ 510---

-

1 9 Days 10Crowned[Aluminum] Aluminum Alloy 5000 series40Clear Anodized Aluminum12New JIS Keyway + Tap-0.3 ～ 1.2110 ～ 500---

-

1 9 Days 10Crowned[Aluminum] Aluminum Alloy 5000 series40Clear Anodized Aluminum12New JIS Keyway + Tap-0.3 ～ 1.2110 ～ 510---

-

1 9 Days 10Crowned[Aluminum] Aluminum Alloy 5000 series40Clear Anodized Aluminum15New JIS Keyway + Tap-0.3 ～ 1.2110 ～ 500---

-

1 9 Days 10Crowned[Aluminum] Aluminum Alloy 5000 series40Clear Anodized Aluminum15New JIS Keyway + Tap-0.3 ～ 1.2110 ～ 510---

-

1 9 Days 10Crowned[Aluminum] Aluminum Alloy 5000 series40Clear Anodized Aluminum20New JIS Keyway + Tap-0.3 ～ 1.2110 ～ 500---

-

1 9 Days 10Crowned[Aluminum] Aluminum Alloy 5000 series40Clear Anodized Aluminum20New JIS Keyway + Tap-0.3 ～ 1.2110 ～ 510---

-

1 9 Days 10Crowned[Aluminum] Aluminum Alloy 5000 series50Clear Anodized Aluminum15 ～ 25Round Hole + Tap-0.3 ～ 1.2110 ～ 500---

-

1 9 Days 10Crowned[Aluminum] Aluminum Alloy 5000 series50Clear Anodized Aluminum15 ～ 25Round Hole + Tap-0.3 ～ 1.2110 ～ 510---

-

1 9 Days 10Crowned[Aluminum] Aluminum Alloy 5000 series50Clear Anodized Aluminum15New JIS Keyway + Tap-0.3 ～ 1.2110 ～ 500---

-

1 9 Days 10Crowned[Aluminum] Aluminum Alloy 5000 series50Clear Anodized Aluminum15New JIS Keyway + Tap-0.3 ～ 1.2110 ～ 510---

-

1 9 Days 10Crowned[Aluminum] Aluminum Alloy 5000 series50Clear Anodized Aluminum20New JIS Keyway + Tap-0.3 ～ 1.2110 ～ 500---

-

1 9 Days 10Crowned[Aluminum] Aluminum Alloy 5000 series50Clear Anodized Aluminum20New JIS Keyway + Tap-0.3 ～ 1.2110 ～ 510---

-

1 9 Days 10Crowned[Aluminum] Aluminum Alloy 5000 series50Clear Anodized Aluminum25New JIS Keyway + Tap-0.3 ～ 1.2110 ～ 500---

-

1 9 Days 10Crowned[Aluminum] Aluminum Alloy 5000 series50Clear Anodized Aluminum25New JIS Keyway + Tap-0.3 ～ 1.2110 ～ 510---

-

1 9 Days 10Crowned[Aluminum] Aluminum Alloy 5000 series60Clear Anodized Aluminum20 ～ 30Round Hole + Tap-0.3 ～ 1.2110 ～ 500---

-

1 9 Days 10Crowned[Aluminum] Aluminum Alloy 5000 series60Clear Anodized Aluminum20 ～ 30Round Hole + Tap-0.3 ～ 1.2110 ～ 510---

-

1 9 Days 10Crowned[Aluminum] Aluminum Alloy 5000 series60Clear Anodized Aluminum20New JIS Keyway + Tap-0.3 ～ 1.2110 ～ 500---

-

1 9 Days 10Crowned[Aluminum] Aluminum Alloy 5000 series60Clear Anodized Aluminum20New JIS Keyway + Tap-0.3 ～ 1.2110 ～ 510---

-

1 9 Days 10Crowned[Aluminum] Aluminum Alloy 5000 series60Clear Anodized Aluminum25New JIS Keyway + Tap-0.3 ～ 1.2110 ～ 500---

-

1 9 Days 10Crowned[Aluminum] Aluminum Alloy 5000 series60Clear Anodized Aluminum25New JIS Keyway + Tap-0.3 ～ 1.2110 ～ 510---

-

1 9 Days 10Crowned[Aluminum] Aluminum Alloy 5000 series60Clear Anodized Aluminum30New JIS Keyway + Tap-0.3 ～ 1.2110 ～ 500---

-

1 9 Days 10Crowned[Aluminum] Aluminum Alloy 5000 series60Clear Anodized Aluminum30New JIS Keyway + Tap-0.3 ～ 1.2110 ～ 510---

-

1 9 Days 10Crowned[Aluminum] Aluminum Alloy 5000 series80Clear Anodized Aluminum25 ～ 35Round Hole + Tap-0.3 ～ 1.2110 ～ 500---

-

1 9 Days 10Crowned[Aluminum] Aluminum Alloy 5000 series80Clear Anodized Aluminum25 ～ 35Round Hole + Tap-0.3 ～ 1.2110 ～ 510---

-

1 9 Days 10Crowned[Aluminum] Aluminum Alloy 5000 series80Clear Anodized Aluminum25New JIS Keyway + Tap-0.3 ～ 1.2110 ～ 500---

-

1 9 Days 10Crowned[Aluminum] Aluminum Alloy 5000 series80Clear Anodized Aluminum25New JIS Keyway + Tap-0.3 ～ 1.2110 ～ 510---

-

1 9 Days 10Crowned[Aluminum] Aluminum Alloy 5000 series80Clear Anodized Aluminum30New JIS Keyway + Tap-0.3 ～ 1.2110 ～ 500---

-

1 9 Days 10Crowned[Aluminum] Aluminum Alloy 5000 series80Clear Anodized Aluminum30New JIS Keyway + Tap-0.3 ～ 1.2110 ～ 510---

-

1 9 Days 10Crowned[Aluminum] Aluminum Alloy 5000 series80Clear Anodized Aluminum35New JIS Keyway + Tap-0.3 ～ 1.2110 ～ 500---

-

1 9 Days 10Crowned[Aluminum] Aluminum Alloy 5000 series80Clear Anodized Aluminum35New JIS Keyway + Tap-0.3 ～ 1.2110 ～ 510---

-

1 9 Days 10Crosspiece Groove[Aluminum] Aluminum Alloy 5000 series30Clear Anodized Aluminum8 ～ 12Round Hole + Tap--110 ～ 5007 ～ 155 ～ 122 ～ 4.5

-

1 9 Days 10Crosspiece Groove[Aluminum] Aluminum Alloy 5000 series30Clear Anodized Aluminum8 ～ 12Round Hole + Tap--110 ～ 5107 ～ 155 ～ 122 ～ 4.5

-

1 9 Days 10Crosspiece Groove[Aluminum] Aluminum Alloy 5000 series30Clear Anodized Aluminum8New JIS Keyway + Tap--110 ～ 5007 ～ 155 ～ 122 ～ 4.5

-

1 9 Days 10Crosspiece Groove[Aluminum] Aluminum Alloy 5000 series30Clear Anodized Aluminum8New JIS Keyway + Tap--110 ～ 5107 ～ 155 ～ 122 ～ 4.5

-

1 9 Days 10Crosspiece Groove[Aluminum] Aluminum Alloy 5000 series30Clear Anodized Aluminum10New JIS Keyway + Tap3-110 ～ 5007 ～ 155 ～ 122 ～ 4.5

-

1 9 Days 10Crosspiece Groove[Aluminum] Aluminum Alloy 5000 series30Clear Anodized Aluminum10New JIS Keyway + Tap3-110 ～ 5107 ～ 155 ～ 122 ～ 4.5

-

1 9 Days 10Crosspiece Groove[Aluminum] Aluminum Alloy 5000 series30Clear Anodized Aluminum12New JIS Keyway + Tap--110 ～ 5007 ～ 155 ～ 122 ～ 4.5

-

1 9 Days 10Crosspiece Groove[Aluminum] Aluminum Alloy 5000 series30Clear Anodized Aluminum12New JIS Keyway + Tap--110 ～ 5107 ～ 155 ～ 122 ～ 4.5

-

1 9 Days 10Crosspiece Groove[Aluminum] Aluminum Alloy 5000 series30Clear Anodized Aluminum10New JIS Keyway + Tap4-110 ～ 5007 ～ 155 ～ 122 ～ 4.5

-

1 9 Days 10Crosspiece Groove[Aluminum] Aluminum Alloy 5000 series30Clear Anodized Aluminum10New JIS Keyway + Tap4-110 ～ 5107 ～ 155 ～ 122 ～ 4.5

-

1 9 Days 10Crosspiece Groove[Aluminum] Aluminum Alloy 5000 series35Clear Anodized Aluminum10 ～ 15Round Hole + Tap--110 ～ 5007 ～ 155 ～ 124 ～ 6

Loading...

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. Next >>
 

Basic information

Type Pulleys With or w/o Flange No Flange Surface Urethane Urethane Not Provided
Length L(mm) ≤300 / ≤500 Shaft Type Round Hole

Configure

Clear all

241Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.
The part number is completed.

Basic Attributes

  • Shape

    • Crowned
    • Crosspiece Groove

    Clear

  • Material

    • Steel
      • EN 1.0480 Equiv.
    • Aluminum
      • Aluminum Alloy 5000 series
    • EN 1.4301 Equiv.

    Clear

  • O.D. D(Ø)

    • 30
    • 35
    • 40
    • 50
    • 60
    • 80

    Clear

  • Surface Treatment

    • Not Provided
    • Electroless Nickel Plating
    • Clear Anodized Aluminum

    Clear

  • Shaft (Bore) Dia. d(mm)

    • 8
    • 10
    • 12
    • 15
    • 20
    • 25
    • 30
    • 35

    Clear

  • Shaft Hole Specifications

    • Round Hole + Tap
    • New JIS Keyway + Tap

    Clear

  • Keyway Width b(mm)

    • 3
    • 4

    Clear

  • H(mm)

    • 0.3
    • 0.5
    • 0.8
    • 1
    • 1.2

    Clear

  • L(mm)

     [110-500/10mm Unit(s)][110-510/1mm Unit(s)]

    Clear

  • X(mm)

     [7-15/0.1mm Unit(s)]

    Clear

  • Y(mm)

     [5-12/0.1mm Unit(s)]

    Clear

  • Z(mm)

     [2-7/0.1mm Unit(s)]

    Clear

  • Type

    • ROBAWC
    • ROBAWM
    • ROBMWC
    • ROBMWM
    • ROBSWC
    • ROBSWM

    Clear

  • Filter by CAD data type

    • 2D
    • 3D

    Clear

Filter by standard shipping days

    • All
    • 9 Days or Less

    Reset

Optional Attributes

Complementary Products

Tech Support

Technical Support
Tel：+49 69 668173-0 / FAX：+49 69 668173-360
Technical Inquiry

Payment Method

  • Payment on account
  • Pre Payment
  • PayPal

On-Demand Manufacturing

Change View

Certificates

  • ISO-9001
  • ISO-14001
  • AEO Certification
  • RoHS
  • REACH

MISUMI worldwide

Social Media

Legal notice

Copyright © MISUMI Corporation All Rights Reserved.