• Brands
  • Company
  • Contact
EN / UK
Type Code Seach | *NOT READY*
#CODE
Keyword suggestions
Part number suggestions
Discontinued Products

Bevel Gears / Pressure Angle 20Deg. / Straight / Spiral Type

Bevel Gears / Pressure Angle 20Deg. / Straight / Spiral Type

Click on this image to zoom in.

Click on this image to zoom in.

MISUMI

MISUMI

Data sheet

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

● Shaft Bore Specifications
Straight BoreStraight Bore + TapKeyway + Tap
[ ! ] Accuracy JIS B1704 Class 4
[ ! ]Unless otherwise specified except for teeth, the dimension tolerance conforms to JIS B 0405 Class m.
[!] Relative positioning of keyway and teeth is not fixed.
[ ! ] Straight Bore Type does not have tapped holes.
Type Material Surface TreatmentAccessory
Straight TypeSpiral Type
Straight BoreStraight Bore + TapKeyway + TapStraight Bore + TapKeyway + Tap
KGEASHKGEASTKGEASKKGEAPTKGEAPKEN 1.1191 Equiv.—Set Screw
(EN 1.7220 Equiv., Black Oxide)
KGEASHBKGEASTBKGEASKBKGEAPTBKGEAPKBBlack Oxide
KGEASHGKGEASTGKGEASKGKGEAPTGKGEAPKGElectroless Nickel Plating
KGHSKGTSKGKS——EN 1.4301 Equiv.—Set Screw (EN 1.4301 Equiv.)
Set Screw is not included when an untapped specification is selected.

Specification Table

Part Number—Nominal (Number of Teeth, Mating Gear)—Shaft Bore Dia. PH7—Twisting Direction
KGEASH1.0
KGEAPTG1.5		—
—		2020
3618		—
—		6
10
—
R
■ Straight Type
Part NumberNominalShaft Bore Dia. PH7 (1 mm Increments)Number of TeethR
(gear ratio)		Mating Gear NumberBHdDSELGℓ1ℓ2L1A°M
(Coarse)
TypeModuleStraight Bore
Straight Bore + Tap		Keyway
+ Tap
Straight Bore
KGEASH
KGEASHB
KGEASHG
KGHS
Straight Bore + Tap
KGEAST
KGEASTB
KGEASTG
KGTS
Keyway + Tap
KGEASK
KGEASKB
KGEASKG
KGKS		1.020206·88201:120204.3162021.4111.82114.5311.7194.51349° 3'M4
25256·8·108·102525255.3202526.41152314.711.21841348° 51'M4
30308·10·128·10·123030306.2223031.4119.42615.8911.718.94.514.547° 42'M4 (M5)
20406·88201:240205.7162021.7912.129.615.0310.058.641429° 8'M4
40208·10·128·10·124020405.7254040.8928.421.815.0212.69841366° 0'M4 (M5)
1.5202010·1210·12201:120206.8243032.1217.72818.5314.0610516.549° 3'M4
252510 to 1410 to 142525257.53037.539.6223.73421.2616.3111.551948° 51'M4
303012 to 1612 to 163030309.3334547.1229.63822.8316.5612.3462147° 42'M5
18368·10·128181:236189.8222729.6812.2 (12.1)40.7422.9614.4112.562129° 25'M4
361810 to 1510 to 153618369.8305455.3434.326.7518.5414.5910515.566° 17'M5
2.0202012 to 1412 to 14201:120208.5344041.3223.9372418.411472149° 3'M5
* 252525252510.5425051.3332.34023.3416.4110.9952148° 51'M5
303016 to 1816 to 1830303012.4446061.3638.95130.7722.4116.7982847° 42'M6
18361010181:2361812.6283637.8119.153.122918.0115.1272729° 25'M4
361812 to 1412 to 1436183612.6367272.1547.635.2124.0719136.52166° 17'M5
Sizes marked with * are only applicable to EN 1.1191 Equiv. Sizes in () are for Stainless Steel 304. Module 1.0 is not available for KGHS (Straight Bore Type of EN 1.4301 Equiv.).
Spiral bevel gears from different manufacturers may not mesh correctly. Be sure to select the MISUMI products in a set. The gears are sold in each piece qty, not as sets. Please note this.
Specify 10K as P dimension if keyway width of 4.0 mm (height 1.8 mm) for Keyway + Tap with shaft bore diameter of 10 is desired. The "-" text in the above table means that it is not selectable.
The set screw sizes are respectively M4 x 3, M5 x 4, and M6 x 5. When the material is EN 1.4301 Equiv., H8 is used when the shaft bore diameter is the smallest within each number of teeth.
■Spiral Type (Helix Angle 35°)
Part NumberNominalShaft Bore Dia. PH7 (1 mm Increments)Twisting
Direction		Number of TeethR
(gear ratio)		Mating
Nominal		BHdDSELGℓ1ℓ2L1A°M
(Coarse)
TypeModuleStraight Bore + TapKeyway
+ Tap
Straight Bore + Tap
KGEAPT
KGEAPTB
KGEAPTG
Keyway + Tap
KGEAPK
KGEAPKB
KGEAPKG		1.020206·88L R201:120204.5162021.1211.32114.4311.5694.51350° 31'M4
303010·1210·12(Left) (Right)3030306.2223031.0919.42615.6711.5494.514.548° 21'M5
20408·10·128L (Left)201:240205.7162021.8712.129.61510.078.641430° 13'M4
402010·1210·12R (Right)4020405.7254040.4128.421.814.5712.21841365° 36'M5
1.5202010·1210·12L R201:120207243031.8517.22818.4413.9310516.550° 5'M4
303012 to 1612 to 16(Left) (Right)3030309.3334546.7929.73822.6416.41262147° 54'M5
18368·10·128L (Left)181:236189.8222730.0912.240.7422.9614.5112.4962130° 44'M4
361810 to 1510 to 15R (Right)3618369.8305454.7634.326.7518.0114.0194.515.565° 57'M5
Use Spiral Type in L and R sets. When the material is EN 1.4301 Equiv., H8 is used when the shaft bore diameter is the smallest within each number of teeth.
Spiral bevel gears from different manufacturers may not mesh correctly. Be sure to select the MISUMI products in a set. The gears are sold in each piece qty, not as sets. Please note this.
Specify 10K as P dimension if keyway width of 4.0 mm (height 1.8 mm) for Keyway + Tap with shaft bore diameter of 10 is desired.

Alterations

Alterations
Code		Set Screw AlterationOrdering Example
KC90Adds another set screw at 90° position.
Not applicable to Straight Bore Type		KGEAPTB1.0-3030-10-R-KC90
KC120Adds another set screw at 120° position.
Not applicable to Straight Bore Type		KGEAPTB1.0-3030-10-R-KC120

Part Number:  

    3D preview is not available, because the part number has not yet been determined.

  • In order to open the 3D preview, the part number must be fixed.
Loading...

Plug-in is required for 3D Preview

CAD Download

Data to be displayed
30
45
60
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. Next >>
Part Number
KGEAPK1.0-2020-8-[L,​R]
KGEAPK1.0-2040-8-L
KGEAPK1.0-3030-10K-[L,​R]
KGEAPK1.0-3030-[10,​12]-[L,​R]
KGEAPK1.0-4020-10-R
KGEAPK1.0-4020-10K-R
KGEAPK1.0-4020-12-R
KGEAPK1.5-1836-8-L
KGEAPK1.5-2020-10-[L,​R]
KGEAPK1.5-2020-10K-[L,​R]
KGEAPK1.5-2020-12-[L,​R]
KGEAPK1.5-3030-[12,​13,​14,​15,​16]-[L,​R]
KGEAPK1.5-3618-10K-R
KGEAPK1.5-3618-[10-15/1]-R
KGEAPKB1.0-2020-8-[L,​R]
KGEAPKB1.0-2040-8-L
KGEAPKB1.0-3030-10K-[L,​R]
KGEAPKB1.0-3030-[10,​12]-[L,​R]
KGEAPKB1.0-4020-10-R
KGEAPKB1.0-4020-10K-R
KGEAPKB1.0-4020-12-R
KGEAPKB1.5-1836-8-L
KGEAPKB1.5-2020-10-[L,​R]
KGEAPKB1.5-2020-10K-[L,​R]
KGEAPKB1.5-2020-12-[L,​R]
KGEAPKB1.5-3030-[12,​13,​14,​15,​16]-[L,​R]
KGEAPKB1.5-3618-10K-R
KGEAPKB1.5-3618-[10-15/1]-R
KGEAPKG1.0-2020-8-[L,​R]
KGEAPKG1.0-2040-8-L
KGEAPKG1.0-3030-10K-[L,​R]
KGEAPKG1.0-3030-[10,​12]-[L,​R]
KGEAPKG1.0-4020-10-R
KGEAPKG1.0-4020-10K-R
KGEAPKG1.0-4020-12-R
KGEAPKG1.5-1836-[8,​10,​12]-L
KGEAPKG1.5-2020-10-[L,​R]
KGEAPKG1.5-2020-10K-[L,​R]
KGEAPKG1.5-2020-12-[L,​R]
KGEAPKG1.5-3030-[12,​13,​14,​15,​16]-[L,​R]
KGEAPKG1.5-3618-10-R
KGEAPKG1.5-3618-10K-R
KGEAPKG1.5-3618-11-R
KGEAPKG1.5-3618-12-R
KGEAPKG1.5-3618-13-R
KGEAPKG1.5-3618-14-R
KGEAPKG1.5-3618-15-R
KGEAPT1.0-2020-[6,​8]-[L,​R]
KGEAPT1.0-2040-[8,​10,​12]-L
KGEAPT1.0-3030-[10,​12]-[L,​R]
KGEAPT1.0-4020-[10,​12]-R
KGEAPT1.5-1836-[8,​10,​12]-L
KGEAPT1.5-2020-[10,​12]-[L,​R]
KGEAPT1.5-3030-[12,​13,​14,​15,​16]-[L,​R]
KGEAPT1.5-3618-[10-15/1]-R
KGEAPTB1.0-2020-[6,​8]-[L,​R]
KGEAPTB1.0-2040-[8,​10,​12]-L
KGEAPTB1.0-3030-[10,​12]-[L,​R]
KGEAPTB1.0-4020-[10,​12]-R
KGEAPTB1.5-1836-[8,​10,​12]-L
Part Number
Standard Unit Price
Minimum order quantityVolume Discount
Standard
Shipping Days
?
RoHSModule Shape Number of Teeth
(Teeth) 		Reduction Ratio Material Tooth Width B
(mm) 		Surface Treatment Shaft Bore Dia. P
(Ø) 		Shaft Hole Specifications Nominal Twisting Direction

-

1 9 Days 101-201General Steel Material4.5Not Provided8Keyway + Tap2020Left [L] / Right [R]

-

1 9 Days 101Spiral Type202General Steel Material5.7Not Provided8Keyway + Tap2040Left [L]

-

1 9 Days 101-301General Steel Material6.2Not Provided10Keyway + Tap3030Left [L] / Right [R]

-

1 9 Days 101-301General Steel Material6.2Not Provided10 ～ 12Keyway + Tap3030Left [L] / Right [R]

-

1 9 Days 101Spiral Type402General Steel Material5.7Not Provided10Keyway + Tap4020Right [R]

-

1 9 Days 101Spiral Type402General Steel Material5.7Not Provided10Keyway + Tap4020Right [R]

-

1 9 Days 101Spiral Type402General Steel Material5.7Not Provided12Keyway + Tap4020Right [R]

-

1 9 Days 101.5Spiral Type182General Steel Material9.8Not Provided8Keyway + Tap1836Left [L]

-

1 9 Days 101.5-201General Steel Material7Not Provided10Keyway + Tap2020Left [L] / Right [R]

-

1 9 Days 101.5-201General Steel Material7Not Provided10Keyway + Tap2020Left [L] / Right [R]

-

1 9 Days 101.5-201General Steel Material7Not Provided12Keyway + Tap2020Left [L] / Right [R]

-

1 9 Days 101.5-301General Steel Material9.3Not Provided12 ～ 16Keyway + Tap3030Left [L] / Right [R]

-

1 9 Days 101.5Spiral Type362General Steel Material9.8Not Provided10Keyway + Tap3618Right [R]

-

1 9 Days 101.5Spiral Type362General Steel Material9.8Not Provided10 ～ 15Keyway + Tap3618Right [R]

-

1 9 Days 101-201General Steel Material4.5Black Oxide8Keyway + Tap2020Left [L] / Right [R]

-

1 9 Days 101Spiral Type202General Steel Material5.7Black Oxide8Keyway + Tap2040Left [L]

-

1 9 Days 101-301General Steel Material6.2Black Oxide10Keyway + Tap3030Left [L] / Right [R]

-

1 9 Days 101-301General Steel Material6.2Black Oxide10 ～ 12Keyway + Tap3030Left [L] / Right [R]

-

1 9 Days 101Spiral Type402General Steel Material5.7Black Oxide10Keyway + Tap4020Right [R]

-

1 9 Days 101Spiral Type402General Steel Material5.7Black Oxide10Keyway + Tap4020Right [R]

-

1 9 Days 101Spiral Type402General Steel Material5.7Black Oxide12Keyway + Tap4020Right [R]

-

1 9 Days 101.5Spiral Type182General Steel Material9.8Black Oxide8Keyway + Tap1836Left [L]

-

1 9 Days 101.5-201General Steel Material7Black Oxide10Keyway + Tap2020Left [L] / Right [R]

-

1 9 Days 101.5-201General Steel Material7Black Oxide10Keyway + Tap2020Left [L] / Right [R]

-

1 9 Days 101.5-201General Steel Material7Black Oxide12Keyway + Tap2020Left [L] / Right [R]

-

1 9 Days 101.5-301General Steel Material9.3Black Oxide12 ～ 16Keyway + Tap3030Left [L] / Right [R]

-

1 9 Days 101.5Spiral Type362General Steel Material9.8Black Oxide10Keyway + Tap3618Right [R]

-

1 9 Days 101.5Spiral Type362General Steel Material9.8Black Oxide10 ～ 15Keyway + Tap3618Right [R]

-

1 9 Days 101-201General Steel Material4.5Electroless Nickel Plating8Keyway + Tap2020Left [L] / Right [R]

-

1 9 Days 101Spiral Type202General Steel Material5.7Electroless Nickel Plating8Keyway + Tap2040Left [L]

-

1 9 Days 101-301General Steel Material6.2Electroless Nickel Plating10Keyway + Tap3030Left [L] / Right [R]

-

1 9 Days 101-301General Steel Material6.2Electroless Nickel Plating10 ～ 12Keyway + Tap3030Left [L] / Right [R]

-

1 9 Days 101Spiral Type402General Steel Material5.7Electroless Nickel Plating10Keyway + Tap4020Right [R]

-

1 9 Days 101Spiral Type402General Steel Material5.7Electroless Nickel Plating10Keyway + Tap4020Right [R]

-

1 9 Days 101Spiral Type402General Steel Material5.7Electroless Nickel Plating12Keyway + Tap4020Right [R]

-

1 9 Days 101.5Spiral Type182General Steel Material9.8Electroless Nickel Plating8 ～ 12Keyway + Tap1836Left [L]

-

1 9 Days 101.5-201General Steel Material7Electroless Nickel Plating10Keyway + Tap2020Left [L] / Right [R]

-

1 9 Days 101.5-201General Steel Material7Electroless Nickel Plating10Keyway + Tap2020Left [L] / Right [R]

-

1 9 Days 101.5-201General Steel Material7Electroless Nickel Plating12Keyway + Tap2020Left [L] / Right [R]

-

1 9 Days 101.5-301General Steel Material9.3Electroless Nickel Plating12 ～ 16Keyway + Tap3030Left [L] / Right [R]

-

1 9 Days 101.5Spiral Type362General Steel Material9.8Electroless Nickel Plating10Keyway + Tap3618Right [R]

-

1 9 Days 101.5Spiral Type362General Steel Material9.8Electroless Nickel Plating10Keyway + Tap3618Right [R]

-

1 9 Days 101.5Spiral Type362General Steel Material9.8Electroless Nickel Plating11Keyway + Tap3618Right [R]

-

1 9 Days 101.5Spiral Type362General Steel Material9.8Electroless Nickel Plating12Keyway + Tap3618Right [R]

-

1 9 Days 101.5Spiral Type362General Steel Material9.8Electroless Nickel Plating13Keyway + Tap3618Right [R]

-

1 9 Days 101.5Spiral Type362General Steel Material9.8Electroless Nickel Plating14Keyway + Tap3618Right [R]

-

1 9 Days 101.5Spiral Type362General Steel Material9.8Electroless Nickel Plating15Keyway + Tap3618Right [R]

-

1 9 Days 101-201General Steel Material4.5Not Provided6 ～ 8Round Hole + Tap2020Left [L] / Right [R]

-

1 9 Days 101Spiral Type202General Steel Material5.7Not Provided8 ～ 12Round Hole + Tap2040Left [L]

-

1 9 Days 101-301General Steel Material6.2Not Provided10 ～ 12Round Hole + Tap3030Left [L] / Right [R]

-

1 9 Days 101Spiral Type402General Steel Material5.7Not Provided10 ～ 12Round Hole + Tap4020Right [R]

-

1 9 Days 101.5Spiral Type182General Steel Material9.8Not Provided8 ～ 12Round Hole + Tap1836Left [L]

-

1 9 Days 101.5-201General Steel Material7Not Provided10 ～ 12Round Hole + Tap2020Left [L] / Right [R]

-

1 9 Days 101.5-301General Steel Material9.3Not Provided12 ～ 16Round Hole + Tap3030Left [L] / Right [R]

-

1 9 Days 101.5Spiral Type362General Steel Material9.8Not Provided10 ～ 15Round Hole + Tap3618Right [R]

-

1 9 Days 101-201General Steel Material4.5Black Oxide6 ～ 8Round Hole + Tap2020Left [L] / Right [R]

-

1 9 Days 101Spiral Type202General Steel Material5.7Black Oxide8 ～ 12Round Hole + Tap2040Left [L]

-

1 9 Days 101-301General Steel Material6.2Black Oxide10 ～ 12Round Hole + Tap3030Left [L] / Right [R]

-

1 9 Days 101Spiral Type402General Steel Material5.7Black Oxide10 ～ 12Round Hole + Tap4020Right [R]

-

1 9 Days 101.5Spiral Type182General Steel Material9.8Black Oxide8 ～ 12Round Hole + Tap1836Left [L]

Loading...

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. Next >>
 

Basic information

Heat Treatment Not Provided Ground Tooth Not Provided Precision(* New JIS) Grade 4
Shaft Bore Tolerance H7

Configure

Clear all

313Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.
The part number is completed.

Basic Attributes

  • Module

    • 1
    • 1.5
    • 2

    Clear

  • Shape

    • Straight Type
    • Spiral Type

    Clear

  • Number of Teeth(Teeth)

    • 18
    • 20
    • 25
    • 30
    • 36
    • 40

    Clear

  • Reduction Ratio

    • 1
    • 2

    Clear

  • Material

    • General Steel Material
    • Stainless Steel

    Clear

  • Tooth Width B(mm)

    • 4.3
    • 4.5
    • 5.3
    • 5.7
    • 6.2
    • 6.8
    • 7
    • 7.5
    • 8.5
    • 9.3
    • 9.8
    • 10.5
    • 12.4
    • 12.6

    Clear

  • Surface Treatment

    • Not Provided
    • Black Oxide
    • Electroless Nickel Plating

    Clear

  • Shaft Bore Dia. P(Ø)

    • 6
    • 8
    • 10
    • 11
    • 12
    • 13
    • 14
    • 15
    • 16
    • 17
    • 18

     [10-18/1Ø Unit(s)]

    Clear

  • Shaft Hole Specifications

    • Keyway + Tap
    • Round Hole
    • Round Hole + Tap

    Clear

  • Nominal

    • 1836
    • 2020
    • 2040
    • 2525
    • 3030
    • 3618
    • 4020

    Clear

  • Twisting Direction

    • Left [L]
    • Right [R]

    Clear

  • Type

    • KGEAPK
    • KGEAPKB
    • KGEAPKG
    • KGEAPT
    • KGEAPTB
    • KGEAPTG
    • KGEASH
    • KGEASHB
    • KGEASHG
    • KGEASK
    • KGEASKB
    • KGEASKG
    • KGEAST
    • KGEASTB
    • KGEASTG
    • KGHS
    • KGKS
    • KGTS

    Clear

  • Filter by CAD data type

    • 2D
    • 3D

    Clear

Filter by standard shipping days

    • All
    • 9 Days or Less

    Reset

Optional Attributes

Complementary Products

Tech Support

Technical Support
Tel：+49 69 668173-0 / FAX：+49 69 668173-360
Technical Inquiry

Payment Method

  • Payment on account
  • Pre Payment
  • PayPal

On-Demand Manufacturing

Change View

Certificates

  • ISO-9001
  • ISO-14001
  • AEO Certification
  • RoHS
  • REACH

MISUMI worldwide

Social Media

Legal notice

Copyright © MISUMI Corporation All Rights Reserved.