Blind Joint Parts - Tapping Joints
- Volume Discount
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
- Drawing / Specifications
- 3D Preview 3D preview is available after complete configuration
- Part Numbers
- More Information
- Technical Information
·Tapping on the extrusion is not necessary.
[S]Surface Treatment: Trivalent Chromate
* JIS−SWCH18A (Cold Forged Carbon Steel Wire)
Specification Table
| Part Number |
| HTJ5 |
| Part Number | Torx Bit | Applicable Extrusion (Pilot Hole Dia.) | Proper Tightening Torque (Max.) | |
| Type | No. | |||
| HTJ | 5 | HTJXL25 | ⌀4.2 | 12 N⋅m |
| Applicable Extrusion No. | [Exception]Extrusion Not Available | |||
| 5−2020* | 5−2040 | 5−2060 | 5−2080 | * Curved HFSR5-2020 is not applicable since wrench holes cannot be added. Not applicable to HFS5-4040, HFSB5-4040, HFST5-4040, NFS5-4040, NFSB5-4040. |
| 5−4040 | ||||
Connecting method
| Alterations required for aluminum extrusions |
|---|
| Mating Extrusion: Wrench Hole |
| Step | 1 | 2 | 3 |
| Description | Tighten temporarily the tapping joint on extrusion end face. (Refer to appropriate tightening torque above.) | Pass the head of tapping joint through the slot of Extrusion (B), and slide it down to the bottom of (A). | Pass the Torx Bit through wrench hole, and tighten by a motorized screw driver. |
| Tapping Joints |  * Tapped holes are not required. |  Side View |  |
Tighten with tapping joints only while tapping.
A lot of force is required as it is inserted and tightened while cutting aluminum. Insert a Torx Bit instead of the electric drill bit to tighten.
Wrench holes are required in one aluminum extrusion to tighten two aluminum extrusions in an L-shape.
By specifying the Wrench Hole in Specified Position, it is also able to tighten in a T-shape.
| 6 Series Part Number Example | Extrusion A | Extrusion B | Torx Bit | Tapping Joints |
|---|---|---|---|---|
| HFS5-2020-1000 | HFS5-2020-1000-LCV | HTJXL25 | HTJ5 |
Product Comparison Information
■5 Series Blind Joints
| Product Name | Tapping Joints | Screw Joints | Center Joints | Post-Assembly Insertion Double Joints | Parallel Joints |
|---|---|---|---|---|---|
| Product Photo |  |  |  |  |  |
| Installation Diagram |  |  |  |  |  |
| Material | JIS−SWCH18A | Steel or EN 1.4301 Equiv. | EN 1.4308 Equiv. | EN 1.4308 Equiv./EN 1.4301 Equiv. | EN 1.4308 Equiv./EN 1.4301 Equiv. |
| Features | Tapping alteration is not required. Most economical Blind Joints. | Joint Plate enables secure and economical connection. | Most standard Blind Joints usable with various types of aluminum extrusions. | Connects securely at two locations. Tightest connection can be achieved of all Blind Joints. | Extrusions can be connected in parallel. |
| In the Extrusion Alterations required | Wrench Hole | Tapping / Wrench Hole | M Hole | M Hole | L Hole |
Part Number:
- In order to open the 3D preview, the part number must be fixed.
3D preview is not available, because the part number has not yet been determined.
Part Number
|
|---|
| HTJ5 |
| HTJ6 |
| HTJ8 |
| Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | RoHS | Series Name | Extrusion No. | |
|---|---|---|---|---|---|---|---|
0.47 € | 1 | Available |
Same day
Stock | 10 | Brackets for 5 Series (Extrusion Slot Width 6mm) | 5 | |
0.61 € | 1 | Available |
Same day
Stock | 10 | Brackets for 6 Series (Extrusion Slot Width 8mm) | 6 | |
0.73 € | 1 | Available |
Same day
Stock | 10 | Brackets for 8 Series (Extrusion Slot Width 10mm) | 8 |
Loading...
App. Example
Side View
Basic information
| Material | JIS-SWCH18A (Carburized) | Type | Tapping Joints |
|---|
Configure
Stock
-
- Show only stock items
Basic Attributes
-
Series Name
- Brackets for 5 Series (Extrusion Slot Width 6mm)
- Brackets for 6 Series (Extrusion Slot Width 8mm)
- Brackets for 8 Series (Extrusion Slot Width 10mm)
-
Extrusion No.
-
Type
- HTJ
-
Filter by CAD data type
- 2D
- 3D
Filter by standard shipping days
-
- All
- Same day
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Complementary Products
Tech Support
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.