Blind Joint Parts - Hexalobular Bit
Click on this image to zoom in.
Click on this image to zoom in.
- Volume Discount
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
- Drawing / Specifications
- 3D Preview 3D preview is available after complete configuration
- Part Numbers
- Technical Information
Specification Table
| Part Number |
| HTJXL25 |
| Part Number | Nominal | |
| Type | No. | |
| HTJXL | 25 | T25 |
Connecting method
| Alterations required for aluminum extrusions |
|---|
| Mating Extrusion: Wrench Hole |
| Step | 1 | 2 | 3 |
| Description | Tighten temporarily the tapping joint on extrusion end face. (Refer to appropriate tightening torque above.) | Pass the head of tapping joint through the slot of Extrusion (B), and slide it down to the bottom of (A). | Pass the Torx Bit through wrench hole, and tighten by a motorized screw driver. |
| Tapping Joints |  * Tapped holes are not required. |  |  |
Tighten with tapping joints only while tapping.
A lot of force is required as it is inserted and tightened while cutting aluminum. Insert a Torx Bit instead of the electric drill bit to tighten.
Wrench holes are required in one aluminum extrusion to tighten two aluminum extrusions in an L-shape.
By specifying the Wrench Hole in Specified Position, it is also able to tighten in a T-shape.
| 6 Series Part Number Example | Extrusion A | Extrusion B | Tapping Joints | Torx Bit |
|---|---|---|---|---|
| HFS5-2020-1000 | HFS5-2020-1000-LCV | HTJ5 | HTJXL25 |
Product Comparison Information
■5 Series Blind Joints
| Product Name | Tapping Joints | Screw Joints | Center Joints | Post-Assembly Insertion Double Joints | Parallel Joints |
|---|---|---|---|---|---|
| Product Photo |  |  |  |  |  |
| Installation Diagram |  |  |  |  |  |
| Material | JIS−SWCH18A | Steel or EN 1.4301 Equiv. | EN 1.4308 Equiv. | EN 1.4308 Equiv./EN 1.4301 Equiv. | EN 1.4308 Equiv./EN 1.4301 Equiv. |
| Features | Tapping alteration is not required. Most economical Blind Joints. | Joint Plate enables secure and economical connection. | Most standard Blind Joints usable with various types of aluminum extrusions. | Connects securely at two locations. Tightest connection can be achieved of all Blind Joints. | Extrusions can be connected in parallel. |
| In the Extrusion Alterations required | Wrench Hole | Tapping / Wrench Hole | M Hole | M Hole | L Hole |
Part Number:
- In order to open the 3D preview, the part number must be fixed.
3D preview is not available, because the part number has not yet been determined.
Loading...
Basic information
| Material | EN 1.6511 Equiv. |
|---|
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Complementary Products
Tech Support
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.