Fence Extrusions / C Shape
Click on this image to zoom in.
Click on this image to zoom in.
(i)Remark
- Cutting is free for this product. Please specify the length you prefer.
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
- Drawing / Specifications
- 3D Preview 3D preview is available after complete configuration
- Part Numbers
- Catalog
- Technical Information
(See below for detailed dimensions)
[ ! ] Cut surfaces are not anodized.
HFSFEW30－3
3 mm Thick Both-Sided for 30 Square
HFSFEW30－5
5 mm Thick Both-Sided for 30 Square
HFSFEW40－3
3 mm Thick Both-Sided for 40 Square
HFSFEW40－5
5 mm Thick Both-Sided for 40 Square
Material: EN AW−6063−T5 Equiv.
Surface treatment: Clear Anodize
Surface treatment: Clear Anodize
Specification Table
| Part Number | — | L |
| HFSFES30−3 | — | 1200 |
| Part Number | L 1 mm increments | Mass kg/m | Sectional Area mm2 | Cross Sectional Moment of Inertia mm4 | ||
| Type | No. | ℓx | ℓy | |||
| HFSFEW | 30−3 | 50 to 4000 | 0.395 | 145 | 1132 | 10040 |
| 30−5 | 0.476 | 175 | 2148 | 10160 | ||
| 40−3 | 0.51 | 188 | 1524 | 23770 | ||
| 40−5 | 0.64 | 235 | 2844 | 23890 | ||
Alterations
Specified hole machining is available.| Alterations | Counterboring | Through Hole | ||||||||||||
| Code | Z Selection | XA | XB | XC | XD | XE | D Selection | XA | XB | XC | XD | XE | ||
| Spec. | Z | d | d1 | Distance from the Left End mm | ⌀D | Distance from the Left End mm | ||||||||
| Specifications of Hole Size and Position | 5 | 5.5 | 9.5 | 7 or more(L−7) | 3.5 | 7 or more(L−7) | ||||||||
| 6 | 6.5 | 11 | 4.5 | |||||||||||
| — | 5.5 | |||||||||||||
| 6.5 | ||||||||||||||
■Specified Hole Machining
(1) Select hole type and size Z (for Counterbore) or D (for Through hole).
(2) Specify the distance from the left end to holes XA, XB, XC, XD and XE in order.
(3) Specify up to 5 counterbores or through holes.
[NG] Combination of counterbore and through hole is not available
(1) Select hole type and size Z (for Counterbore) or D (for Through hole).
(2) Specify the distance from the left end to holes XA, XB, XC, XD and XE in order.
(3) Specify up to 5 counterbores or through holes.
[NG] Combination of counterbore and through hole is not available
| Alterations | 45° Cut [ ! ] Applicable to HFSFES only | |
| Left | Right | |
| Code | LCT45 | RCT45 |
| Spec. |  |  |
·For counterbores, the screw goes in as much as the thickness of t.
·The side walls of counterbores may break due to drilling.
Part Number:
- In order to open the 3D preview, the part number must be fixed.
3D preview is not available, because the part number has not yet been determined.
Loading...
Part Number
|
|---|
| HFSFEW30-3-[50-4000/1] |
| HFSFEW30-5-[50-4000/1] |
| HFSFEW40-3-[50-4000/1] |
| HFSFEW40-5-[50-4000/1] |
| Part Number | Minimum order quantity | Volume Discount | RoHS | Extrusion Size: Width (mm) | Compatible Plate Width | Overall Length L (mm) | |
|---|---|---|---|---|---|---|---|
| 1 | 5 Days | 10 | 30 | 3 | 50 ～ 4000 | ||
| 1 | 5 Days | 10 | 30 | 5 | 50 ～ 4000 | ||
| 1 | 5 Days | 10 | 40 | 3 | 50 ～ 4000 | ||
| 1 | 5 Days | 10 | 40 | 5 | 50 ～ 4000 |
Loading...
Basic information
| Type | H Extrusions |
|---|
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Complementary Products
Tech Support
- Technical Support
- Tel：+49 69 668173-0 / FAX：+49 69 668173-360
- Technical Inquiry
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.