Perforated Metal / Circular
- Order quantities extended (D-JIT)
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
- Drawing / Specifications
- 3D Preview 3D preview is available after complete configuration
- Part Numbers
- More Information
- Catalog
Dimensional Drawing
PMC·PMCU
[ ! ] Hole positions on cut surface cannot be specified.
[ ! ] Frame of the same material is spot-welded to Standard Type (PMC, PMCU).
[ ! ] PMCUF is acid pickled after spot-welded.[ ! ] Hole positions on frames cannot be specified.
| Type | [M] Material | [S] Surface Treatment | |
| Standard Type | Framed Type | ||
| PMC | PMCF | EN 1.0330 Equiv. | Nickel Plating |
| PMCU | PMCUF | EN 1.4301 Equiv. | — |
Specification Table
| Part Number | — | A | — | T | — | C |
| PMC4 PMCF4 | — — | 280 200 | — — | 1.0 1.2 | — | 10 |
| Part Number | 1 mm Increments A | T Selection | C Selection | P | Perforated Rate % | |||
| Type | D | PMC·PMCF | PMCU·PMCUF | PMCF·PMCUF | ||||
| Standard Type PMC PMCU | Framed Type PMCF PMCUF | 1 | (Standard Type) 30 to 300 (Framed Type) 50 to 300 | 0.5 0.8 | 0.5 0.8 | 10 15 20 | 2 | 22.6 |
| 2 | 0.5 0.8 1.0 | 1.0 | 3 | 40.2 | ||||
| 3 | 1.0 1.2 1.6 | 1.0 1.2 1.5 | 5 | 32.6 | ||||
| 4 | 7 | 29.6 | ||||||
| 5 | 8 | 35.4 | ||||||
Alterations
| Part Number | — | A | — | T | — | C | — | (XC·XAC·XWC·DRC·NC·NAC·NWC) | |||||||||||||||||||
| PMC1 PMCF4 | — — | 100 200 | — — | 0.8 1.2 | — | 10 | — — | XC9 NC4.5 | — | Q60 | |||||||||||||||||
| Alterations | 4, 6 Mounting Holes | 8 Mounting Holes | Hole Drilled | 4, 6 Mounting Holes | 8 Mounting Holes | |||||||||||||||||||||
| ·4 Mounting Holes: XC
|
| · Standard Type
| ·4 Mounting Holes: NC
|
| ||||||||||||||||||||||
| Code | XC·XAC | XWC | DRC | NC·NAC | NWC | |||||||||||||||||||||
| Spec. | XC, XAC = Hole Dia. Selection Q = 1 mm Increments Ordering Code XC4.5−Q30 XAC5.5−Q50 [ ! ] Hole Dia. Selection Table
[ ! ]XAC+20 ≤ Q ≤ A−XAC−6 [ ! ] Applicable to Standard Type only [ ! ] XC hole dia. 9 is applicable to A ≥ 50 [ ! ] XAC is applicable to A ≥ 50 | XWC = Hole Dia. Selection Q = 1 mm Increments [ ! ] Hole Dia. Selection Table
[ ! ]XWC+20 ≤ Q ≤ A− [ ! ] Applicable to Standard Type only [ ! ] Applicable to A ≥ 50 | * Adds a drilled hole at the center. DRC = 1 mm Increments Ordering Code DRC40 · Standard Type [ ! ] 20 ≤ DRC ≤ A - 30 [ NG ] Combination use of XC, XAC, XWC is not possible. ·Framed Type [ ! ]20 ≤ DRC ≤ A−2C−30 [ ! ] Applicable to A ≥ 50 | NC, NAC = Hole Dia. Selection Ordering Code NC4.5 NAC6.5 [ ! ] Hole Dia. Selection Table
| NWC = Hole Dia. Selection Ordering Code NWC9 [ ! ] Hole Dia. Selection Table
|
Part Number:
- In order to open the 3D preview, the part number must be fixed.
3D preview is not available, because the part number has not yet been determined.
| Part Number | Minimum order quantity | Volume Discount | RoHS | Material | Specifications | Punch Hole Dia. D (φ) | A (mm) | C (mm) | T (mm) | |
|---|---|---|---|---|---|---|---|---|---|---|
| 1 | 9 Days | 10 | EN 1.0330 Equiv. | Standard Circular Type | 1 | 30 ～ 300 | - | 0.5 ～ 0.8 | ||
| 1 | 9 Days | 10 | EN 1.0330 Equiv. | Standard Circular Type | 2 | 30 ～ 300 | - | 0.5 ～ 1 | ||
| 1 | 9 Days | 10 | EN 1.0330 Equiv. | Standard Circular Type | 3 | 30 ～ 300 | - | 1 ～ 1.6 | ||
| 1 | 9 Days | 10 | EN 1.0330 Equiv. | Standard Circular Type | 4 | 30 ～ 300 | - | 1 ～ 1.6 | ||
| 1 | 9 Days | 10 | EN 1.0330 Equiv. | Standard Circular Type | 5 | 30 ～ 300 | - | 1 ～ 1.6 | ||
| 1 | 9 Days | 10 | EN 1.0330 Equiv. | Framed Circular Type | 1 | 50 ～ 300 | 10 ～ 20 | 0.5 ～ 0.8 | ||
| 1 | 9 Days | 10 | EN 1.0330 Equiv. | Framed Circular Type | 2 | 50 ～ 300 | 10 ～ 20 | 0.5 ～ 1 | ||
| 1 | 9 Days | 10 | EN 1.0330 Equiv. | Framed Circular Type | 3 | 50 ～ 300 | 10 ～ 20 | 1 ～ 1.6 | ||
| 1 | 9 Days | 10 | EN 1.0330 Equiv. | Framed Circular Type | 4 | 50 ～ 300 | 10 ～ 20 | 1 ～ 1.6 | ||
| 1 | 9 Days | 10 | EN 1.0330 Equiv. | Framed Circular Type | 5 | 50 ～ 300 | 10 ～ 20 | 1 ～ 1.6 | ||
| 1 | 9 Days | 10 | EN 1.4301 Equiv. | Standard Circular Type | 1 | 30 ～ 300 | - | 0.5 ～ 0.8 | ||
| 1 | 9 Days | 10 | EN 1.4301 Equiv. | Standard Circular Type | 2 | 30 ～ 300 | - | 1 | ||
| 1 | 9 Days | 10 | EN 1.4301 Equiv. | Standard Circular Type | 3 | 30 ～ 300 | - | 1 ～ 1.5 | ||
| 1 | 9 Days | 10 | EN 1.4301 Equiv. | Standard Circular Type | 4 | 30 ～ 300 | - | 1 ～ 1.5 | ||
| 1 | 9 Days | 10 | EN 1.4301 Equiv. | Standard Circular Type | 5 | 30 ～ 300 | - | 1 ～ 1.5 | ||
| 1 | 9 Days | 10 | EN 1.4301 Equiv. | Framed Circular Type | 1 | 50 ～ 300 | 10 ～ 20 | 0.5 ～ 0.8 | ||
| 1 | 9 Days | 10 | EN 1.4301 Equiv. | Framed Circular Type | 2 | 50 ～ 300 | 10 ～ 20 | 1 | ||
| 1 | 9 Days | 10 | EN 1.4301 Equiv. | Framed Circular Type | 3 | 50 ～ 300 | 10 ～ 20 | 1 ～ 1.5 | ||
| 1 | 9 Days | 10 | EN 1.4301 Equiv. | Framed Circular Type | 4 | 50 ～ 300 | 10 ～ 20 | 1 ～ 1.5 | ||
| 1 | 9 Days | 10 | EN 1.4301 Equiv. | Framed Circular Type | 5 | 50 ～ 300 | 10 ～ 20 | 1 ～ 1.5 |
Loading...
App. Example
Configure
Basic Attributes
-
Material
- EN 1.0330 Equiv.
- EN 1.4301 Equiv.
-
Specifications
- Framed Circular Type
- Standard Circular Type
-
Punch Hole Dia. D(φ)
- 1
- 2
- 3
- 4
- 5
-
A(mm)
-
C(mm)
-
T(mm)
-
Type
- PMC
- PMCF
- PMCU
- PMCUF
-
Filter by CAD data type
- 2D
- 3D
Filter by standard shipping days
-
- All
- 9 Days or Less
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Complementary Products
Tech Support
- Technical Support
- Tel：+49 69 668173-0 / FAX：+49 69 668173-360
- Technical Inquiry
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.