Spring Plungers / Flat Nose
- Volume Discount
- Order quantities extended (D-JIT)
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
- Drawing / Specifications
- 3D Preview 3D preview is available after complete configuration
- Part Numbers
- Catalog
| Type | Body | Pin | Spring | Operating Temperature |
| [M]Material "H" Hardness "S" Surface Treatment | [M]Material "H" Hardness "S" Surface Treatment | [M] Material | ||
| PJLF (Light Load) | [ M ] EN 1.7220 Equiv. | [ M ] EN 1.1191 Equiv. | JIS−SWP−B | −30 to 80°C |
| [ H ] 29 to 35HRC | [H]57 to 63HRC (Carburized) | |||
| [S]Black Oxide | [S]Trivalent Chromate |
Specification Table
| Part Number | — | S |
| PJLF6 | — | 3 |
| Part Number | S | d | ℓ | L | B | Load N | ||
| Type | M (Coarse) | min. | max. | |||||
| PJLF | 5 | 3 | 2.0 | 20 | 20 | 1.5 | 1.5 | 9.8 |
| 5 | 2.0 | 27 | 27 | 1.5 | 1.6 | 10.4 | ||
| 6 | 3 | 2.5 | 25 | 25 | 2 | 3.4 | 10.4 | |
| 5 | 2.5 | 30 | 30 | 2 | 1.9 | 9.7 | ||
| 8 | 3 | 3.1 | 25 | 25 | 2.5 | 3.5 | 9.4 | |
| 5 | 3.1 | 27 | 27 | 2.5 | 2.9 | 9.6 | ||
| 10 | 5 | 3.8 | 30 | 30 | 3 | 2.8 | 14.1 | |
| 10 | 3.8 | 30 | 43 | 3 | 2.9 | 14.6 | ||
| 12 | 10 | 5.5 | 35 | 43 | 4 | 2.5 | 21.1 | |
[!] Thread Locking Treatment is where anaerobic thread locking compound in micro capsules is used to retain the threads. Once parts have been loosened, adhesion is lost. Use an anaerobic thread locking compound when reassembling.
[!] The thread locking is most effective by leaving the parts for 72 hours or more and in 25°C. It should be noted if the parts are left for short period of time and in low temperature, the thread locking compound will be less-effective.
[ ! ] Do not use the rear hex socket at the time of mounting or removal.
Part Number:
- In order to open the 3D preview, the part number must be fixed.
3D preview is not available, because the part number has not yet been determined.
Part Number
|
|---|
| PJLF5-3 |
| PJLF5-5 |
| PJLF6-3 |
| PJLF6-5 |
| PJLF8-3 |
| PJLF8-5 |
| PJLF10-5 |
| PJLF10-10 |
| PJLF12-10 |
| Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | RoHS | O.D. M (mm) | Stroke (S) (mm) | Min. Load (N) | Max. Load (N) | |
|---|---|---|---|---|---|---|---|---|---|
5.04 € | 1 | Available |
Same day
Stock | 10 | 5 | 3 | 2 | 9.8 | |
5.65 € | 1 | Available |
Same day
Stock | 10 | 5 | 5 | 2 | 9.8 | |
5.04 € | 1 | Available |
Same day
Stock | 10 | 6 | 3 | 5.9 | 9.8 | |
5.65 € | 1 | Available |
Same day
Stock | 10 | 6 | 5 | 2 | 9.8 | |
5.04 € | 1 | Available | 5 Days | 10 | 8 | 3 | 5.9 | 9.8 | |
5.65 € | 1 | Available |
Same day
Stock | 10 | 8 | 5 | 2.9 | 9.8 | |
5.28 € | 1 | Available |
Same day
Stock | 10 | 10 | 5 | 5.9 | 14.7 | |
6.66 € | 1 | Available |
Same day
Stock | 10 | 10 | 10 | 2.9 | 14.7 | |
7.31 € | 1 | Available |
Same day
Stock | 10 | 12 | 10 | 2.9 | 19.6 |
Loading...
Basic information
| Pin Material | EN 1.1191 Equiv. | Body Material | EN 1.1191 Equiv. | Mounting Method | Screw-In |
|---|---|---|---|---|---|
| Thread Locking Compound | Provided | Pin Plunger Type | Flat | Wrench Hole Shape | Hex |
| Main Body Surface Treatment | Black Oxide | Pin Surface Treatment | Trivalent Chromate | Tip Heat Treatment | Carburized |
| Initial Load (Range)(N) | 0.01 to 50 |
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Complementary Products
-
stopper bolts / hexagon socket at head / regular thread / MC-Nylon locking head / steel / chromated
MISUMI Standard Price : 7.79 € Shipping Days: Same day
MISUMI Unit еxample related to this product
Tech Support
- Technical Support
- Tel：+49 69 668173-0 / FAX：+49 69 668173-360
- Technical Inquiry
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.