• Brands
  • Company
  • Contact
EN / UK
Type Code Seach | *NOT READY*
#CODE
Keyword suggestions
Part number suggestions
Discontinued Products

Height Adjust Pins / With Shoulder / Round / Wrench Flats

Height Adjust Pins / With Shoulder / Round / Wrench Flats

MISUMI

MISUMI

  • Order quantities extended (D-JIT)

Data sheet

Unit еxample related to this product
Foldable unit X
Search for оther еxamples

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

● Round

● Wrench Flats


* Under-head of F Configurable Type is R0.5 or less. Take note of chamfering on the tapped hole.
[M] Material[S] Surface Treatment[H] HardnessTypeOrdering Code, Shape Code
F FixedF Configurable
EN 1.2510 Equiv.—Treated Hardness: 60 to 63 HRCJPHAF (Round)

AW (Wrench Flats)		AFM (Round)

AWM (Wrench Flats)
Black OxideTreated Hardness: 60 to 63 HRCBJPH
Hard Chrome PlatingTreated Hardness: 50 to 55 HRC
Plating Hardness: 750 HV or more		HJPH
EN 1.4301 Equiv.——SJPH
EN 1.4125 Equiv. or
13Cr Stainless Steel		—Treated Hardness: 50 to 55 HRCCJPH
EN 1.7242 Equiv.—Carburized 55 HRC or more (Depth 0.7 to 0.8)TJPH
[!] Some combinations are not available.
[ ! ] EN 1.4301 Equiv. may not be polished.

Specification Table

 Part Number—L—D—W—F
■Round, Wrench Flats Threaded         
(Round, F Fixed)JPHAF3—5.21—6    
(Round, F Configurable)JPHAFM3—L5.21—D6  —F9
          
(Wrench Flats, F Fixed)HJPHAW10—20—15—W11  
(Wrench Flats, F Configurable)HJPHAWM10—L20.00—D15—W11—F15
Part NumberL
0.01 mm Increments		D
1 mm Increments		W
1 mm Increments		F
TypeShape CodeM (Coarse)* Tightening Torque
N・cm		Standard1 mm Increments
JPH
BJPH
HJPH
SJPH
CJPH
TJPH		[Round]
AF (F Fixed)
AFM (F Configurable)

[Wrench Flats]
AW (F Fixed)
AWM (F Configurable)		 398 2.00 to 10.005 to 30
(M < D < M × 5)		 4 to 1353 to 36
(M ≤ F ≤ M × 3)
 4225 5 to 186
 5461 6 to 238
 6784 5.00 to 30.00 7 to 28
 81911 9 to 2910
10378310.00 to 50.0011 to 2912
12660513 to 2915
[ ! ]M < W < D
*The tightening torque (ref. value) for hardened products is strength class 8.8. Not applicable when using locking agents or spring washers.

Alterations

Part Number—L—D—W—F—(CRC·EAT)
JPHAF10—20.50 25    —CRC
HJPHAWM10—L15.00—D20—W20—F15—EAT
[ ! ] Alterations are applicable to Threaded only
AlterationsRadius to End FaceSeating Sensor Holes
CodeCRCEAT
Spec.
Chamfering of workpiece receiving-surface is changed to R1.
Ordering Code CRC

[NG] No addition of radius to wrench flats.

[ ! ] Applicable when L ≥ 15
Machines seating sensor holes on the work-receiving surface.
Hole diameters are shown in the table below. Ordering Code EAT
[ ! ] Applicable when M ≥ 6
[ ! ] Application conditions vary depending on F and L dimensions.
MNarrow Hole Dia.Through Hole Dia.Applicable Overall Length Conditions
d1d2
61.01.5F+L ≤ 20
81.02.5F+L ≤ 30
101.53.5F+L ≤ 40
121.54.5F+L ≤ 50

Part Number:  

    3D preview is not available, because the part number has not yet been determined.

  • In order to open the 3D preview, the part number must be fixed.
Loading...

Plug-in is required for 3D Preview

CAD Download

Data to be displayed
30
45
60
  1. 1
Part Number
HJPHAF3-[2-10/0.01]-[5-14/1]
HJPHAF4-[2-10/0.01]-[5-19/1]
HJPHAF5-[2-10/0.01]-[6-24/1]
HJPHAF6-[5-30/0.01]-[7-29/1]
HJPHAF8-[5-30/0.01]-[9-30/1]
HJPHAF10-[10-50/0.01]-[11-30/1]
HJPHAF12-[10-50/0.01]-[13-30/1]
HJPHAFM3-L[2-10/0.01]-D[5-14/1]-F[3-9/1]
HJPHAFM4-L[2-10/0.01]-D[5-19/1]-F[4-12/1]
HJPHAFM5-L[2-10/0.01]-D[6-24/1]-F[5-15/1]
HJPHAFM6-L[5-30/0.01]-D[7-29/1]-F[6-18/1]
HJPHAFM8-L[5-30/0.01]-D[9-30/1]-F[8-24/1]
HJPHAFM10-L[10-50/0.01]-D[11-30/1]-F[10-30/1]
HJPHAFM12-L[10-50/0.01]-D[13-30/1]-F[12-36/1]
HJPHAW3-[2-10/0.01]-[5-14/1]-W[4-13/1]
HJPHAW4-[2-10/0.01]-[5-19/1]-W[5-18/1]
HJPHAW5-[2-10/0.01]-[6-24/1]-W[6-23/1]
HJPHAW6-[5-30/0.01]-[7-29/1]-W[7-28/1]
HJPHAW8-[5-30/0.01]-[9-30/1]-W[9-29/1]
HJPHAW10-[10-50/0.01]-[11-30/1]-W[11-29/1]
HJPHAW12-[10-50/0.01]-[13-30/1]-W[13-29/1]
HJPHAWM3-L[2-10/0.01]-D[5-14/1]-W[4-13/1]-F[3-9/1]
HJPHAWM4-L[2-10/0.01]-D[5-19/1]-W[5-18/1]-F[4-12/1]
HJPHAWM5-L[2-10/0.01]-D[6-24/1]-W[6-23/1]-F[5-15/1]
HJPHAWM6-L[5-30/0.01]-D[7-29/1]-W[7-28/1]-F[6-18/1]
HJPHAWM8-L[5-30/0.01]-D[9-30/1]-W[9-29/1]-F[8-24/1]
HJPHAWM10-L[10-50/0.01]-D[11-30/1]-W[11-29/1]-F[10-30/1]
HJPHAWM12-L[10-50/0.01]-D[13-30/1]-W[13-29/1]-F[12-36/1]
Part NumberMinimum order quantityVolume Discount
Standard
Shipping Days
?
RoHSMaterial Surface Treatment
(Ø) 		Heat Treatment Hardness F Dimension Specifying Method Thread Dia. M
(mm) 		O.D. D
(mm) 		Screw Length F
(mm) 		L
(mm) 		W
(mm)
1 9 Days 10SteelHard Chrome PlatingProvidedTreated Hardness: 50 ~ 55HRC, Plating Hardness: 750HV ~F Fixed35 ～ 1452 ～ 10-
1 9 Days 10SteelHard Chrome PlatingProvidedTreated Hardness: 50 ~ 55HRC, Plating Hardness: 750HV ~F Fixed45 ～ 1962 ～ 10-
1 9 Days 10SteelHard Chrome PlatingProvidedTreated Hardness: 50 ~ 55HRC, Plating Hardness: 750HV ~F Fixed56 ～ 2482 ～ 10-
1 9 Days 10SteelHard Chrome PlatingProvidedTreated Hardness: 50 ~ 55HRC, Plating Hardness: 750HV ~F Fixed67 ～ 2985 ～ 30-
1 9 Days 10SteelHard Chrome PlatingProvidedTreated Hardness: 50 ~ 55HRC, Plating Hardness: 750HV ~F Fixed89 ～ 30105 ～ 30-
1 9 Days 10SteelHard Chrome PlatingProvidedTreated Hardness: 50 ~ 55HRC, Plating Hardness: 750HV ~F Fixed1011 ～ 301210 ～ 50-
1 9 Days 10SteelHard Chrome PlatingProvidedTreated Hardness: 50 ~ 55HRC, Plating Hardness: 750HV ~F Fixed1213 ～ 301510 ～ 50-
1 9 Days 10SteelHard Chrome PlatingProvidedTreated Hardness: 50 ~ 55HRC, Plating Hardness: 750HV ~F Configurable35 ～ 143 ～ 92 ～ 10-
1 9 Days 10SteelHard Chrome PlatingProvidedTreated Hardness: 50 ~ 55HRC, Plating Hardness: 750HV ~F Configurable45 ～ 194 ～ 122 ～ 10-
1 9 Days 10SteelHard Chrome PlatingProvidedTreated Hardness: 50 ~ 55HRC, Plating Hardness: 750HV ~F Configurable56 ～ 245 ～ 152 ～ 10-
1 9 Days 10SteelHard Chrome PlatingProvidedTreated Hardness: 50 ~ 55HRC, Plating Hardness: 750HV ~F Configurable67 ～ 296 ～ 185 ～ 30-
1 9 Days 10SteelHard Chrome PlatingProvidedTreated Hardness: 50 ~ 55HRC, Plating Hardness: 750HV ~F Configurable89 ～ 308 ～ 245 ～ 30-
1 9 Days 10SteelHard Chrome PlatingProvidedTreated Hardness: 50 ~ 55HRC, Plating Hardness: 750HV ~F Configurable1011 ～ 3010 ～ 3010 ～ 50-
1 9 Days 10SteelHard Chrome PlatingProvidedTreated Hardness: 50 ~ 55HRC, Plating Hardness: 750HV ~F Configurable1213 ～ 3012 ～ 3610 ～ 50-
1 9 Days 10SteelHard Chrome PlatingProvidedTreated Hardness: 50 ~ 55HRC, Plating Hardness: 750HV ~F Fixed35 ～ 1452 ～ 104 ～ 13
1 9 Days 10SteelHard Chrome PlatingProvidedTreated Hardness: 50 ~ 55HRC, Plating Hardness: 750HV ~F Fixed45 ～ 1962 ～ 105 ～ 18
1 9 Days 10SteelHard Chrome PlatingProvidedTreated Hardness: 50 ~ 55HRC, Plating Hardness: 750HV ~F Fixed56 ～ 2482 ～ 106 ～ 23
1 9 Days 10SteelHard Chrome PlatingProvidedTreated Hardness: 50 ~ 55HRC, Plating Hardness: 750HV ~F Fixed67 ～ 2985 ～ 307 ～ 28
1 9 Days 10SteelHard Chrome PlatingProvidedTreated Hardness: 50 ~ 55HRC, Plating Hardness: 750HV ~F Fixed89 ～ 30105 ～ 309 ～ 29
1 9 Days 10SteelHard Chrome PlatingProvidedTreated Hardness: 50 ~ 55HRC, Plating Hardness: 750HV ~F Fixed1011 ～ 301210 ～ 5011 ～ 29
1 9 Days 10SteelHard Chrome PlatingProvidedTreated Hardness: 50 ~ 55HRC, Plating Hardness: 750HV ~F Fixed1213 ～ 301510 ～ 5013 ～ 29
1 9 Days 10SteelHard Chrome PlatingProvidedTreated Hardness: 50 ~ 55HRC, Plating Hardness: 750HV ~F Configurable35 ～ 143 ～ 92 ～ 104 ～ 13
1 9 Days 10SteelHard Chrome PlatingProvidedTreated Hardness: 50 ~ 55HRC, Plating Hardness: 750HV ~F Configurable45 ～ 194 ～ 122 ～ 105 ～ 18
1 9 Days 10SteelHard Chrome PlatingProvidedTreated Hardness: 50 ~ 55HRC, Plating Hardness: 750HV ~F Configurable56 ～ 245 ～ 152 ～ 106 ～ 23
1 9 Days 10SteelHard Chrome PlatingProvidedTreated Hardness: 50 ~ 55HRC, Plating Hardness: 750HV ~F Configurable67 ～ 296 ～ 185 ～ 307 ～ 28
1 9 Days 10SteelHard Chrome PlatingProvidedTreated Hardness: 50 ~ 55HRC, Plating Hardness: 750HV ~F Configurable89 ～ 308 ～ 245 ～ 309 ～ 29
1 9 Days 10SteelHard Chrome PlatingProvidedTreated Hardness: 50 ~ 55HRC, Plating Hardness: 750HV ~F Configurable1011 ～ 3010 ～ 3010 ～ 5011 ～ 29
1 9 Days 10SteelHard Chrome PlatingProvidedTreated Hardness: 50 ~ 55HRC, Plating Hardness: 750HV ~F Configurable1213 ～ 3012 ～ 3610 ～ 5013 ～ 29

Loading...

  1. 1

App. Example

 

Basic information

Shape Height Adjusting Pins Height Tolerance 0/+0.01 Mounting Method Threads
Tip Shape Flat

Configure

Clear all

28Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.
The part number is completed.

Basic Attributes

  • Material

    • Steel
    • Stainless Steel

    Clear

  • Heat Treatment

    • Provided
    • Not Provided

    Clear

  • Hardness

    • Treated Hardness: 50 ~ 55HRC
    • Treated Hardness: 50 ~ 55HRC, Plating Hardness: 750HV ~
    • Carburized Treated Hardness: 55HRC~ (Depth: 0.7 ~ 0.8)
    • Treated Hardness: 60 ~ 63HRC
    • Not Provided

    Clear

  • F Dimension Specifying Method

    • F Configurable
    • F Fixed

    Clear

  • Thread Dia. M(mm)

    • 3
    • 4
    • 5
    • 6
    • 8
    • 10
    • 12

    Clear

  • O.D. D(mm)

     [5-30/1mm Unit(s)]

    Clear

  • Screw Length F(mm)

    • 5
    • 6
    • 8
    • 10
    • 12
    • 15

     [3-36/1mm Unit(s)]

    Clear

  • L(mm)

     [2-50/0.01mm Unit(s)]

    Clear

  • W(mm)

     [4-29/1mm Unit(s)]

    Clear

  • Type

    • BJPHAF
    • BJPHAFM
    • BJPHAW
    • BJPHAWM
    • CJPHAF
    • CJPHAFM
    • CJPHAW
    • CJPHAWM
    • HJPHAF
    • HJPHAFM
    • HJPHAW
    • HJPHAWM
    • JPHAF
    • JPHAFM
    • JPHAW
    • JPHAWM
    • SJPHAF
    • SJPHAFM
    • SJPHAW
    • SJPHAWM
    • TJPHAFM
    • TJPHAW
    • TJPHAWM

    Clear

  • Surface Treatment(Ø)

    • Not Provided
    • Hard Chrome Plating
    • Black Oxide

    Clear

  • Filter by CAD data type

    • 2D
    • 3D

    Clear

Filter by standard shipping days

    • All
    • 9 Days or Less
    • 11 Days or Less

    Reset

Optional Attributes

Complementary Products

MISUMI Unit еxample related to this product

Search for оther еxamples

back next

Tech Support

Technical Support
Tel：+49 69 668173-0 / FAX：+49 69 668173-360
Technical Inquiry

Payment Method

  • Payment on account
  • Pre Payment
  • PayPal

On-Demand Manufacturing

Change View

Certificates

  • ISO-9001
  • ISO-14001
  • AEO Certification
  • RoHS
  • REACH

MISUMI worldwide

Social Media

Legal notice

Copyright © MISUMI Corporation All Rights Reserved.