• Brands
  • Company
  • Contact
EN / UK
Type Code Seach | *NOT READY*
#CODE
Keyword suggestions
Part number suggestions
Discontinued Products

Height Adjust Pins / Hex

Height Adjust Pins / Hex

MISUMI

MISUMI

  • Order quantities extended (D-JIT)

Data sheet

Unit еxample related to this product
Workpiece seating correction unit
Search for оther еxamples

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.


* Under-head of B Fixed and F Configurable Type is R0.5 or less.
　　Take note of chamfering on the tapped hole.
[M] Material[S] Surface Treatment[H] HardnessType
B Fixed
F Fixed		B Fixed
F Configurable		B Selectable
F Fixed
EN 1.7220 Equiv.—Treated Hardness: 46 to 50 HRCJPRAJPRAMJPRFA
Black OxideTreated Hardness: 46 to 50 HRCBJPRABJPRAMBJPRFA
Hard Chrome PlatingTreated Hardness: 46 to 50 HRC
Plating Hardness: 750 HV or more		HJPRAHJPRAMHJPRFA
EN 1.4301 Equiv.——SJPRASJPRAMSJPRFA
EN 1.4125 Equiv. or
13Cr Stainless Steel		—Treated Hardness: 50 to 55 HRCCJPRACJPRAMCJPRFA
[ ! ] EN 1.4301 Equiv. may not be polished.

Specification Table

 Part Number—L—B—F
(Hex, B and F Fixed)JPRA4—10.00    
(Hex, B Fixed and F Configurable)JPRAM8—L15.00  —F12
(Hex, B Selectable and F Fixed)JPRFA6—20.00—8  
Part NumberL
0.01 mm Increments		BF
TypeM (Coarse)* Tightening Torque
N・cm		StandardSelectionStandard1 mm Increments
B, F Fixed
JPRA
BJPRA
HJPRA
SJPRA
CJPRA		B Fixed and F Configurable
JPRAM
BJPRAM
HJPRAM
SJPRAM
CJPRAM		B Selectable and F Fixed
JPRFA
BJPRFA
HJPRFA
SJPRFA
CJPRFA		 398 2.00 to 10.00 6 5   53 to 36
(M ≤ F ≤ M × 3)
 4225 7 6   6
 5461 8 7   8
 6784 5.00 to 30.0010 8  
 81911131012 10
10378310.00 to 50.001712131412
126605191417 15
  *The tightening torque (ref. value) for hardened products is strength class 8.8. Not applicable when using locking agents or spring washers.

Alterations

Part Number—L—B—F—(CRC·EAT) 
JPRA10
HJPRAM10		—
—		20.50
L15.00		  
—
F18		—
—		CRC
EAT
AlterationsRadius to End FaceSeating Sensor Holes
CodeCRCEAT
Spec.
Chamfering of workpiece receiving-surface is changed to R1.
Hex is R size in the right table.
Ordering Code CRC
[ ! ] Applicable when L ≥ 15
[ ! ] Hex is applicable to B ≥ 10
 		[Enlarged Photo of Receiving-surface]
 　B　　R　 
102
12·132.5
143
17·194
Machines seating sensor holes on the work-receiving surface.
Hole diameters are shown in the table below. Ordering Code EAT
[ ! ] Applicable when M ≥ 6
[ ! ] Application conditions vary depending on F and L dimensions.
 
MNarrow Hole Dia.Through Hole Dia.Applicable Overall Length Conditions 
d1d2
61.01.5F+L ≤ 20
81.02.5F+L ≤ 30
101.53.5F+L ≤ 40
121.54.5F+L ≤ 50

Part Number:  

    3D preview is not available, because the part number has not yet been determined.

  • In order to open the 3D preview, the part number must be fixed.
Loading...

Plug-in is required for 3D Preview

CAD Download

Data to be displayed
30
45
60
  1. 1
Part Number
HJPRA3-[2-10/0.01]
HJPRA4-[2-10/0.01]
HJPRA5-[2-10/0.01]
HJPRA6-[5-30/0.01]
HJPRA8-[5-30/0.01]
HJPRA10-[10-50/0.01]
HJPRA12-[10-50/0.01]
HJPRAM3-L[2-10/0.01]-F[3-9/1]
HJPRAM4-L[2-10/0.01]-F[4-12/1]
HJPRAM5-L[2-10/0.01]-F[5-15/1]
HJPRAM6-L[5-30/0.01]-F[6-18/1]
HJPRAM8-L[5-30/0.01]-F[8-24/1]
HJPRAM10-L[10-50/0.01]-F[10-30/1]
HJPRAM12-L[10-50/0.01]-F[12-36/1]
HJPRFA3-[2-10/0.01]-5
HJPRFA4-[2-10/0.01]-6
HJPRFA5-[2-10/0.01]-7
HJPRFA6-[5-30/0.01]-8
HJPRFA8-[5-30/0.01]-[10,​12]
HJPRFA10-[10-50/0.01]-[12,​13,​14]
HJPRFA12-[10-50/0.01]-[14,​17]
Part NumberMinimum order quantityVolume Discount
Standard
Shipping Days
?
RoHSMaterial Surface Treatment
(Ø) 		Heat Treatment Hardness B Dimension, F Dimension Specifying Method Thread Dia. M
(mm) 		Wrench Flats B
(mm) 		Screw Length F
(mm) 		L
(mm)
1 9 Days 10SteelHard Chrome PlatingProvidedTreated Hardness: 46 ~ 50HRC, Plating Hardness: 750HV ~B, F Fixed3652 ～ 10
1 9 Days 10SteelHard Chrome PlatingProvidedTreated Hardness: 46 ~ 50HRC, Plating Hardness: 750HV ~B, F Fixed4762 ～ 10
1 9 Days 10SteelHard Chrome PlatingProvidedTreated Hardness: 46 ~ 50HRC, Plating Hardness: 750HV ~B, F Fixed5882 ～ 10
1 9 Days 10SteelHard Chrome PlatingProvidedTreated Hardness: 46 ~ 50HRC, Plating Hardness: 750HV ~B, F Fixed61085 ～ 30
1 9 Days 10SteelHard Chrome PlatingProvidedTreated Hardness: 46 ~ 50HRC, Plating Hardness: 750HV ~B, F Fixed813105 ～ 30
1 9 Days 10SteelHard Chrome PlatingProvidedTreated Hardness: 46 ~ 50HRC, Plating Hardness: 750HV ~B, F Fixed10171210 ～ 50
1 9 Days 10SteelHard Chrome PlatingProvidedTreated Hardness: 46 ~ 50HRC, Plating Hardness: 750HV ~B, F Fixed12191510 ～ 50
1 9 Days 10SteelHard Chrome PlatingProvidedTreated Hardness: 46 ~ 50HRC, Plating Hardness: 750HV ~B Fixed, F Configurable363 ～ 92 ～ 10
1 9 Days 10SteelHard Chrome PlatingProvidedTreated Hardness: 46 ~ 50HRC, Plating Hardness: 750HV ~B Fixed, F Configurable474 ～ 122 ～ 10
1 9 Days 10SteelHard Chrome PlatingProvidedTreated Hardness: 46 ~ 50HRC, Plating Hardness: 750HV ~B Fixed, F Configurable585 ～ 152 ～ 10
1 9 Days 10SteelHard Chrome PlatingProvidedTreated Hardness: 46 ~ 50HRC, Plating Hardness: 750HV ~B Fixed, F Configurable6106 ～ 185 ～ 30
1 9 Days 10SteelHard Chrome PlatingProvidedTreated Hardness: 46 ~ 50HRC, Plating Hardness: 750HV ~B Fixed, F Configurable8138 ～ 245 ～ 30
1 9 Days 10SteelHard Chrome PlatingProvidedTreated Hardness: 46 ~ 50HRC, Plating Hardness: 750HV ~B Fixed, F Configurable101710 ～ 3010 ～ 50
1 9 Days 10SteelHard Chrome PlatingProvidedTreated Hardness: 46 ~ 50HRC, Plating Hardness: 750HV ~B Fixed, F Configurable121912 ～ 3610 ～ 50
1 9 Days 10SteelHard Chrome PlatingProvidedTreated Hardness: 46 ~ 50HRC, Plating Hardness: 750HV ~B Selectable, F Fixed3552 ～ 10
1 9 Days 10SteelHard Chrome PlatingProvidedTreated Hardness: 46 ~ 50HRC, Plating Hardness: 750HV ~B Selectable, F Fixed4662 ～ 10
1 9 Days 10SteelHard Chrome PlatingProvidedTreated Hardness: 46 ~ 50HRC, Plating Hardness: 750HV ~B Selectable, F Fixed5782 ～ 10
1 9 Days 10SteelHard Chrome PlatingProvidedTreated Hardness: 46 ~ 50HRC, Plating Hardness: 750HV ~B Selectable, F Fixed6885 ～ 30
1 9 Days 10SteelHard Chrome PlatingProvidedTreated Hardness: 46 ~ 50HRC, Plating Hardness: 750HV ~B Selectable, F Fixed810 ～ 12105 ～ 30
1 9 Days 10SteelHard Chrome PlatingProvidedTreated Hardness: 46 ~ 50HRC, Plating Hardness: 750HV ~B Selectable, F Fixed1012 ～ 141210 ～ 50
1 9 Days 10SteelHard Chrome PlatingProvidedTreated Hardness: 46 ~ 50HRC, Plating Hardness: 750HV ~B Selectable, F Fixed1214 ～ 171510 ～ 50

Loading...

  1. 1
 

Basic information

Shape Height Adjusting Pins Height Tolerance 0/+0.01 Mounting Method Threads
Tip Shape Flat

Configure

Clear all

21Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.
The part number is completed.

Basic Attributes

  • Material

    • Steel
    • Stainless Steel

    Clear

  • Heat Treatment

    • Provided
    • Not Provided

    Clear

  • Hardness

    • Treated Hardness: 46 ~ 50HRC
    • Treated Hardness: 46 ~ 50HRC, Plating Hardness: 750HV ~
    • Treated Hardness: 50 ~ 55HRC
    • Not Provided

    Clear

  • B Dimension, F Dimension Specifying Method

    • B Fixed, F Configurable
    • B Selectable, F Fixed
    • B, F Fixed

    Clear

  • Thread Dia. M(mm)

    • 3
    • 4
    • 5
    • 6
    • 8
    • 10
    • 12

    Clear

  • Wrench Flats B(mm)

    • 5
    • 6
    • 7
    • 8
    • 10
    • 12
    • 13
    • 14
    • 17
    • 19

    Clear

  • Screw Length F(mm)

    • 5
    • 6
    • 8
    • 10
    • 12
    • 15

     [3-36/1mm Unit(s)]

    Clear

  • L(mm)

     [2-50/0.01mm Unit(s)]

    Clear

  • Type

    • BJPRA
    • BJPRAM
    • BJPRFA
    • CJPRA
    • CJPRAM
    • CJPRFA
    • HJPRA
    • HJPRAM
    • HJPRFA
    • JPRA
    • JPRAM
    • JPRFA
    • SJPRA
    • SJPRAM
    • SJPRFA

    Clear

  • Surface Treatment(Ø)

    • Not Provided
    • Hard Chrome Plating
    • Black Oxide

    Clear

  • Filter by CAD data type

    • 2D
    • 3D

    Clear

Filter by standard shipping days

    • All
    • 9 Days or Less

    Reset

Optional Attributes

Complementary Products

MISUMI Unit еxample related to this product

Search for оther еxamples

back next

Tech Support

Technical Support
Tel：+49 69 668173-0 / FAX：+49 69 668173-360
Technical Inquiry

Payment Method

  • Payment on account
  • Pre Payment
  • PayPal

On-Demand Manufacturing

Change View

Certificates

  • ISO-9001
  • ISO-14001
  • AEO Certification
  • RoHS
  • REACH

MISUMI worldwide

Social Media

Legal notice

Copyright © MISUMI Corporation All Rights Reserved.