Fluororesin Couplings / 90 Deg. Elbow / Union
Click on this image to zoom in.
Click on this image to zoom in.
- Volume Discount
No special tools are required for tightening. A full fluoropolymer fitting with high chemical resistance.
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
- Drawing / Specifications
- 3D Preview 3D preview is available after complete configuration
- Part Numbers
- Catalog
Dimensional Drawings
FEUE
Specification Table
| Part Number | — | Nominal |
| FENL4 | — | 1 |
| Part Number | B | C | D | E | F | W | |
| Type | Applicable Tube O.D. (mm) | ||||||
| FEUE | 4 | 15 | 11 | 7 | 3 | 10 | 8 |
| 6 | 19 | 14 | 10 | 4 | 12 | 10 | |
| 8 | 25 | 18 | 12 | 6 | 17 | 14 | |
| 10 | 30 | 21 | 16 | 8 | 22 | 17 | |
Structure Diagram ·Nut Tightening Torque (Reference Value)
| Temperature-Pressure Curve ·Specifications
| |||||||||||||||||||||||||||||||||
[ ! ] 1. Fluororesin (PFA) tube is used in the measurement.
(1) Remove the nut from the fitting and insert it into the tube.
(2) Insert the tube into the fitting.
(3) Tighten the nut to secure the fitting and tube.
2. General tolerance of tube is absorbed if the nut is tightened by the above torque value.
3. Number of revolution is begun to count up when tightening becomes fixed suddenly after lightly tightened by hand.
[ ! ] When using hard tubes such as fluororesin (PFA) tubes, tube inserts are not required.
· Features
Excellent in chemical resistance.
Possible to tighten the nut with a spanner without using special tools.
(1) Remove the nut from the fitting and insert it into the tube.
(2) Insert the tube into the fitting.
(3) Tighten the nut to secure the fitting and tube.
2. General tolerance of tube is absorbed if the nut is tightened by the above torque value.
3. Number of revolution is begun to count up when tightening becomes fixed suddenly after lightly tightened by hand.
[ ! ] When using hard tubes such as fluororesin (PFA) tubes, tube inserts are not required.
· Features
Excellent in chemical resistance.
Possible to tighten the nut with a spanner without using special tools.
Part Number:
- In order to open the 3D preview, the part number must be fixed.
3D preview is not available, because the part number has not yet been determined.
Loading...
Loading...
Basic information
| Type | Fitting Main Body | Main Body Material | Fluororesin | Connection Type | Pipe-to-Pipe Equal Dia. Connection |
|---|---|---|---|---|---|
| Pipe-to-Pipe Same Diameter Connection Type | Union Elbows |
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Complementary Products
Tech Support
- Technical Support
- Tel：+49 69 668173-0 / FAX：+49 69 668173-360
- Technical Inquiry
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.