Free Flow Conveyor Chains
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
- Drawing / Specifications
- 3D Preview 3D preview is available after complete configuration
- Part Numbers
- More Information
- Catalog
WCHE
(Figure: 4 Links)
[ ! ] The final links are attached as the joint links.
[!] Operating Temp.: −10°C to 80°C
[M]Material Plate, Pin: Steel
Roller: Special engineering plastic
Specification Table
| Part Number | — | Number of Links |
| WCHE3 | — | 200 |
| Part Number | Number of Links Specified (Even number specified) | Pitch | Roller | Plate | Pin | Max. Allowable Tension (kN) | Speed Multiplier | Approx. Mass kg/m | Unit Number of Links | |||||||
| Type | Nominal | P | R1 | R2 | W1 | W2 | a | g | f | h | m | |||||
| (Chain) WCHE | 3 | 4 to 550 | 19.05 | 11.91 | 18.3 | 7.0 | 4.1 | 8.8 | 1.2 | 3.28 | 11.2 | 12.95 | 0.55 | 2.54 | 0.4 | 160 (Circumference Length 3,048 mm) |
| 4 | 4 to 410 | 25.40 | 15.88 | 24.6 | 9.0 | 6.0 | 11.7 | 1.5 | 3.97 | 15.2 | 16.75 | 0.88 | 2.55 | 0.8 | 120 (Circumference Length 3,048 mm) | |
| 5 | 4 to 350 | 31.75 | 19.05 | 30.0 | 11.4 | 7.0 | 14.6 | 2.0 | 5.08 | 19.45 | 20.90 | 1.37 | 2.57 | 1.3 | 96 (Circumference Length 3,048 mm) | |
Part Number:
- In order to open the 3D preview, the part number must be fixed.
3D preview is not available, because the part number has not yet been determined.
Part Number
|
|---|
| WCHE3-[4-550/2] |
| WCHE4-[4-410/2] |
| WCHE5-[4-350/2] |
| Part Number | Minimum order quantity | Volume Discount | RoHS | Chain No. | Allowable Tension (Range Selectable) (kN) | Type Nominal | Pitch P (mm) | Number of Links Specification | |
|---|---|---|---|---|---|---|---|---|---|
| 1 | 7 Days | 10 | 60 | Up to 0.65 | 3 | 19.05 | 4 ～ 550 | ||
| 1 | 7 Days | 10 | 80 | 0.66 to 1.30 | 4 | 25.40 | 4 ～ 410 | ||
| 1 | 7 Days | 10 | 100 | 1.31 to 2.50 | 5 | 31.75 | 4 ～ 350 |
Loading...
Specifications/Overview
■Principle of the Double Speed Chains
V: Pallet Speed
r: Radius of Small Diameter Roller
R: Radius of Large Diameter Roller
When a chain runs at v speed, circumferential velocity of the small diameter roller is v.
At this time circumferential velocity of the large diameter roller becomes (R/r)·v due to ratio of radius.
Therefore, Pallet Speed V becomes a value that chain speed V and (R/r)·v are combined.
V = (R/r)·v + v
= (R/r + 1)·v
Since the ratio of radius of the large diameter roller and the small diameter roller is approximately 1.5:1,
V ≈ (1.5 + 1)·v
≈ 2.5v
Basic information
| Category | Center Rollers |
|---|
Configure
Basic Attributes
-
Chain No.
-
Allowable Tension (Range Selectable)(kN)
- Up to 0.65
- 0.66 to 1.30
- 1.31 to 2.50
-
Type Nominal
- 3
- 4
- 5
-
Pitch P(mm)
- 19.05
- 25.40
- 31.75
-
Number of Links Specification
-
Type
- WCHE
-
Filter by CAD data type
- 2D
- 3D
Filter by standard shipping days
-
- All
- 7 Days or Less
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Complementary Products
-
Return Guides for Double Speed / Free Flow Conveyor Chains
MISUMI Standard Price : 22.30 € Shipping Days: 5 Days
Tech Support
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.