Mirrored Plate / Acrylic Type
Click on this image to zoom in.
Click on this image to zoom in.
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
- Drawing / Specifications
- 3D Preview 3D preview is available after complete configuration
- Part Numbers
- More Information
- Catalog
Drawing
■ Standard Type | ■ Hole Machined Type 2H  | 4H  |
| Hole Machining Details | ||||||||||||||
|
[ ! ] A ≥ B Circumference Chamfering C0.3 to 1.0
[ ! ] Keep a dimension of 5 mm or more between hole end and glass end.
[ ! ] The F Dimension tolerance of MRA and MRAA is ±1.0.
| No Adhesive | With Adhesive Type | [M] Material | Heat-resistant Temperature |
| Continuous Use | |||
| MRG | MRGA | Glass | 80 deg. |
| MRA | MRAA | Acrylic | 50 deg. |
| [!] Heat resistant temperature will be largely varied depending on the operating condition. Values are not guaranteed. | |||
Specification Table
| Part Number | — | A | — | B |
| MRG3 | — | 250 | — | 100 |
| Part Number | — | A | — | B | — | F | — | G | — | Bolt Nominal |
| MRG4H3 | — | 200 | — | 180 | — | F160 | — | G140 | — | N5 |
| ■ Standard Type | |||||
| Part Number | 1 mm Increments | ||||
| Type | T | A | B | ||
| No Adhesive MRG MRA | With Adhesive MRGA MRAA | (Glass Mirror) (Acrylic Mirror) | 3 | 10 to 300 | 10 to 300 |
| ■ Hole Machined Type | ||||||||||
| Part Number | 1 mm Increments | Bolt Nominal Dia. Selection | ||||||||
| Type | Number of Holes | T | A | B | F | G | N (Through Hole) | P (Countersink) | ||
| No Adhesive MRG MRA | With Adhesive MRGA MRAA | (Glass Mirror) (Acrylic Mirror) | 2H 4H | 3 | 10 to 300 | 10 to 300 | 9 to 241 | 9 to 241 | 5 | 3 |
| Weight | Scratch Resistance | Break | Heat Resistance | Chemical Resistance | |
| Glass Mirror | Heavy (Specific Gravity 2.5) | ○ | Frangible | 80 deg. | ○ |
| Acrylic Mirror | Light (Specific Gravity 1.2) | × | Hard to break | 50 deg. | × (Organic Solvent Resistance) |
Part Number:
- In order to open the 3D preview, the part number must be fixed.
3D preview is not available, because the part number has not yet been determined.
| Part Number | Minimum order quantity | Volume Discount | RoHS | Glass Material | Specifications | Accessories | Number of Holes | Length A (mm) | Width B (mm) | Countersink Hole Nominal Dia. [P] | F (mm) | G (mm) | Through Hole Nominal Dia. [N] | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1 | 9 Days | 10 | Acrylic | With Machined Hole Type | - | 2H (Two Holes) | 10 ～ 300 | 10 ～ 300 | - | 9 ～ 241 | 9 ～ 241 | 5 | ||
| 1 | 9 Days | 10 | Acrylic | With Machined Hole Type | - | 2H (Two Holes) | 10 ～ 300 | 10 ～ 300 | 3 | 9 ～ 241 | 9 ～ 241 | - | ||
| 1 | 9 Days | 10 | Acrylic | Standard Type | - | - | 10 ～ 300 | 10 ～ 300 | - | - | - | - | ||
| 1 | 9 Days | 10 | Acrylic | With Machined Hole Type | - | 4H (Four Holes) | 10 ～ 300 | 10 ～ 300 | - | 9 ～ 241 | 9 ～ 241 | 5 | ||
| 1 | 9 Days | 10 | Acrylic | With Machined Hole Type | - | 4H (Four Holes) | 10 ～ 300 | 10 ～ 300 | 3 | 9 ～ 241 | 9 ～ 241 | - | ||
| 1 | 9 Days | 10 | Acrylic | With Machined Hole Type | Seals | 2H (Two Holes) | 10 ～ 300 | 10 ～ 300 | - | 9 ～ 241 | 9 ～ 241 | 5 | ||
| 1 | 9 Days | 10 | Acrylic | With Machined Hole Type | Seals | 2H (Two Holes) | 10 ～ 300 | 10 ～ 300 | 3 | 9 ～ 241 | 9 ～ 241 | - | ||
| 1 | 9 Days | 10 | Acrylic | Standard Type | Seals | - | 10 ～ 300 | 10 ～ 300 | - | - | - | - | ||
| 1 | 9 Days | 10 | Acrylic | With Machined Hole Type | Seals | 4H (Four Holes) | 10 ～ 300 | 10 ～ 300 | - | 9 ～ 241 | 9 ～ 241 | 5 | ||
| 1 | 9 Days | 10 | Acrylic | With Machined Hole Type | Seals | 4H (Four Holes) | 10 ～ 300 | 10 ～ 300 | 3 | 9 ～ 241 | 9 ～ 241 | - | ||
| 1 | 9 Days | 10 | Glass | With Machined Hole Type | - | 2H (Two Holes) | 10 ～ 300 | 10 ～ 300 | - | 9 ～ 241 | 9 ～ 241 | 5 | ||
| 1 | 9 Days | 10 | Glass | With Machined Hole Type | - | 2H (Two Holes) | 10 ～ 300 | 10 ～ 300 | 3 | 9 ～ 241 | 9 ～ 241 | - | ||
| 1 | 7 Days | 10 | Glass | Standard Type | - | - | 10 ～ 300 | 10 ～ 300 | - | - | - | - | ||
| 1 | 9 Days | 10 | Glass | With Machined Hole Type | - | 4H (Four Holes) | 10 ～ 300 | 10 ～ 300 | - | 9 ～ 241 | 9 ～ 241 | 5 | ||
| 1 | 9 Days | 10 | Glass | With Machined Hole Type | - | 4H (Four Holes) | 10 ～ 300 | 10 ～ 300 | 3 | 9 ～ 241 | 9 ～ 241 | - | ||
| 1 | 9 Days | 10 | Glass | With Machined Hole Type | Seals | 2H (Two Holes) | 10 ～ 300 | 10 ～ 300 | - | 9 ～ 241 | 9 ～ 241 | 5 | ||
| 1 | 9 Days | 10 | Glass | With Machined Hole Type | Seals | 2H (Two Holes) | 10 ～ 300 | 10 ～ 300 | 3 | 9 ～ 241 | 9 ～ 241 | - | ||
| 1 | 7 Days | 10 | Glass | Standard Type | Seals | - | 10 ～ 300 | 10 ～ 300 | - | - | - | - | ||
| 1 | 9 Days | 10 | Glass | With Machined Hole Type | Seals | 4H (Four Holes) | 10 ～ 300 | 10 ～ 300 | - | 9 ～ 241 | 9 ～ 241 | 5 | ||
| 1 | 9 Days | 10 | Glass | With Machined Hole Type | Seals | 4H (Four Holes) | 10 ～ 300 | 10 ～ 300 | 3 | 9 ～ 241 | 9 ～ 241 | - |
Loading...
■Seals With Adhesive Type | For easy attachment, the size of double-faced adhesive tape is smaller than that of the mirror. (Approx. 5 mm to 10 mm) Mirrors are shipped without seal attached. Seal thickness is 2 mm. [ ! ] It may fall due to its own weight depending on its size. Avoid mounting only by the adhesive sheets. [ ! ] Avoid use in the areas splashed with water, which may cause dirt and tarnishing on mirrors. |
App. Example
As an indirect light angle adjustor of an image processing device
Basic information
| Thickness T(mm) | 3 |
|---|
Configure
Basic Attributes
-
Glass Material
- Acrylic
- Glass
-
Specifications
- Standard Type
- With Machined Hole Type
-
Accessories
- Seals
-
Number of Holes
- 2H (Two Holes)
- 4H (Four Holes)
-
Length A(mm)
-
Width B(mm)
-
Countersink Hole Nominal Dia. [P]
-
F(mm)
-
G(mm)
-
Through Hole Nominal Dia. [N]
-
Type
- MRA
- MRAA
- MRAA□H
- MRA□H
- MRG
- MRGA
- MRGA□H
- MRG□H
-
Filter by CAD data type
- 2D
- 3D
Filter by standard shipping days
-
- All
- 7 Days or Less
- 9 Days or Less
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Complementary Products
-
Anti-vibration mats / studded / equipment dampers / can be cut to size / silicone / ASKER C30
MISUMI Standard Price : 11.55 € Shipping Days: Same day
-
Safety Protection Materials / Rubber Bumper Pads / Square
MISUMI Standard Price : 6.17 € Shipping Days: Same day
Tech Support
- Technical Support
- Tel：+49 69 668173-0 / FAX：+49 69 668173-360
- Technical Inquiry
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.