• Brands
  • Company
  • Contact
EN / UK
Type Code Seach | *NOT READY*
#CODE
Keyword suggestions
Part number suggestions
Discontinued Products

Slot Pins for Inspection Jigs / 1 Stepped / Threaded End Type

Slot Pins for Inspection Jigs / 1 Stepped / Threaded End Type

Click on this image to zoom in.

Click on this image to zoom in.

MISUMI

MISUMI

[Features] Use it when clamping a workpiece with depth.

Data sheet

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Slot Pins for Inspection Components - Threaded Straight Long: Related Image
[!] Handles and pins may be joined with an adhesive. Note that heat or strong force may cause separation.
[ ! ] Unless otherwise specified, the dimension tolerance conforms to JIS B 0405 Class m. However, tapped depth is excluded.
[M]Material [!] 1[H] HardnessTYPE
P 0
−0.02		Pg6
EN 1.1191 Equiv.—KJPLMKJPGLM
[ ! ] The joint of each step may have a relief groove (approx. 1 mm wide and approx. 0.2 mm deep).
　

Specification Table

Part Number (TYPE· d)—P—M—L—B—Z
KJPLM16—P12—M6—L130—B15—Z30
(Threaded Long)
Part Number (TYPE·D)—L—M—B
KJPND10—L80—M4—B10
(Threaded Pin)
Pg6
4.00 to 6.00−0.004
−0.012
6.01 to 10.00−0.005
−0.014
10.01 to 18.00−0.006
−0.017
18.01 to 23.00−0.007
−0.020
Part NumberP
0.01 mm Increments		M (Coarse)
P ≥ M Selection		1 mm IncrementsZ
Selection
TYPEd
P 0
− 0.02		Pg6LB
KJPLMKJPGLM124.00 to 10.004568   35 to 1455 to 2530
40
50
166.00 to 14.00456810S1012 (M ≤ B ≤ M × 3)
2010.00 to 18.00 56810S1012(When P < 12, L + B ≤ 100)
2515.00 to 23.00(When P ≥ 12, L + B ≤ 150)
AlterationsCodeSpec.
Engraving of S Dimension
Slot Pins for Inspection Components - Threaded Pins: Related Image		KHSMachines flats on knurled head and engraves S dimension.
[ ! ] Engraved on the reverse side when combined with KH.
[ ! ] Applicable to Threaded Straight Long Type only
Engraving of P Dimension
Slot Pins for Inspection Components - Threaded Pins: Related Image		KHMachines flats on knurled head and engraves P dimension (with the character orientation arbitrary).
[ ! ] Engraved on the reverse side when combined with KHS.
[ ! ] Applicable to Threaded Straight Long Type only
AlterationsCodeSpec.
Chain
Slot Pins for Inspection Components - Threaded Pins: Related Image		CHLoss-proof chain (length 600 mm) is attached to gauge body.

[ ! ] Applicable to Threaded Straight Long Type only

Additional Surface Treatment
(Black Oxide)		STCAdds black oxide surface treatment.
[ NG ] Not applicable to EN 1.4301 Equiv.
Caution when making alterations to engraving (KHS, KH)
Slot Pins for Inspection Components - Threaded Pins: Related Image
[ ! ] If the pin and the knurled part are joined with an adhesive,
10 mm of the tip is not machined flat because the tip is thin.

Part Number:  

    3D preview is not available, because the part number has not yet been determined.

  • In order to open the 3D preview, the part number must be fixed.
Loading...

Plug-in is required for 3D Preview

CAD Download

Data to be displayed
30
45
60
  1. 1
Part Number
KJPGLM12-P[4-10/0.01]-M[4,​5,​6,​8]-L[35-100/1]-B[5-25/1]-Z[30,​40,​50]
KJPGLM16-P[6-14/0.01]-M[4,​5,​6,​8,​10,​12]-L[35-150/1]-B[5-25/1]-Z[30,​40,​50]
KJPGLM16-P[6-14/0.01]-MS10-L[35-150/1]-B[5-25/1]-Z[30,​40,​50]
KJPGLM20-P[10-18/0.01]-M[4,​5,​6,​8,​10,​12]-L[35-150/1]-B[5-25/1]-Z[30,​40,​50]
KJPGLM20-P[10-18/0.01]-MS10-L[35-150/1]-B[5-25/1]-Z[30,​40,​50]
KJPGLM25-P[15-23/0.01]-M[4,​5,​6,​8,​10,​12]-L[35-150/1]-B[5-25/1]-Z[30,​40,​50]
KJPGLM25-P[15-23/0.01]-MS10-L[35-150/1]-B[5-25/1]-Z[30,​40,​50]
KJPLM12-P[4-10/0.01]-M[4,​5,​6,​8]-L[35-100/1]-B[5-25/1]-Z[30,​40,​50]
KJPLM16-P[6-14/0.01]-M[4,​5,​6,​8,​10,​12]-L[35-150/1]-B[5-25/1]-Z[30,​40,​50]
KJPLM16-P[6-14/0.01]-MS10-L[35-150/1]-B[5-25/1]-Z[30,​40,​50]
KJPLM20-P[10-18/0.01]-M[5,​6,​8,​10,​12]-L[35-145/1]-B[5-25/1]-Z[30,​40,​50]
KJPLM20-P[10-18/0.01]-MS10-L[35-145/1]-B[5-25/1]-Z[30,​40,​50]
KJPLM25-P[15-23/0.01]-M[4,​5,​6,​8,​10,​12]-L[35-150/1]-B[5-25/1]-Z[30,​40,​50]
KJPLM25-P[15-23/0.01]-MS10-L[35-150/1]-B[5-25/1]-Z[30,​40,​50]
Part NumberMinimum order quantityVolume Discount
Standard
Shipping Days
?
RoHSInsertion Part P Dimension Tolerance Outer Dia. D
(Ø) 		Handle Length Z
(mm) 		B
(mm) 		L
(mm) 		P
(mm) 		Thread Dia. Selection (Coarse) [M]
(mm) 		Thread Dia. Selection (Fine) [MS]
(mm)
1 9 Days 10g61230 ～ 505 ～ 2535 ～ 1004 ～ 104 ～ 8-
1 9 Days 10g61630 ～ 505 ～ 2535 ～ 1506 ～ 144 ～ 12-
1 9 Days 10g61630 ～ 505 ～ 2535 ～ 1506 ～ 14-10
1 9 Days 10g62030 ～ 505 ～ 2535 ～ 15010 ～ 184 ～ 12-
1 9 Days 10g62030 ～ 505 ～ 2535 ～ 15010 ～ 18-10
1 9 Days 10g62530 ～ 505 ～ 2535 ～ 15015 ～ 234 ～ 12-
1 9 Days 10g62530 ～ 505 ～ 2535 ～ 15015 ～ 23-10
1 9 Days 100/-0.021230 ～ 505 ～ 2535 ～ 1004 ～ 104 ～ 8-
1 9 Days 100/-0.021630 ～ 505 ～ 2535 ～ 1506 ～ 144 ～ 12-
1 9 Days 100/-0.021630 ～ 505 ～ 2535 ～ 1506 ～ 14-10
1 9 Days 100/-0.022030 ～ 505 ～ 2535 ～ 14510 ～ 185 ～ 12-
1 9 Days 100/-0.022030 ～ 505 ～ 2535 ～ 14510 ～ 18-10
1 9 Days 100/-0.022530 ～ 505 ～ 2535 ～ 15015 ～ 234 ～ 12-
1 9 Days 100/-0.022530 ～ 505 ～ 2535 ～ 15015 ～ 23-10

Loading...

  1. 1

App. Example

 

Basic information

Type Slot Pin Shape Straight Tip Shape Circular Shape
Tip Type Threads Shape of Stepped Section Circular Shape Material EN 1.1191 Equiv.
Hardness No Hardened

Configure

Clear all

14Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.
The part number is completed.

Basic Attributes

  • Insertion Part P Dimension Tolerance

    • 0/-0.02
    • g6

    Clear

  • Outer Dia. D(Ø)

    • 12
    • 16
    • 20
    • 25

    Clear

  • Handle Length Z(mm)

    • 30
    • 40
    • 50

    Clear

  • B(mm)

     [5-25/1mm Unit(s)]

    Clear

  • L(mm)

     [35-150/1mm Unit(s)]

    Clear

  • P(mm)

     [4-23/0.01mm Unit(s)]

    Clear

  • Thread Dia. Selection (Coarse) [M](mm)

    • 4
    • 5
    • 6
    • 8
    • 10
    • 12

    Clear

  • Thread Dia. Selection (Fine) [MS](mm)

    • 10

    Clear

  • Type

    • KJPGLM
    • KJPLM

    Clear

  • Filter by CAD data type

    • 2D
    • 3D

    Clear

Filter by standard shipping days

    • All
    • 9 Days or Less

    Reset

Optional Attributes

Complementary Products

Tech Support

Technical Support
Tel：+49 69 668173-0 / FAX：+49 69 668173-360
Technical Inquiry

Payment Method

  • Payment on account
  • Pre Payment
  • PayPal

On-Demand Manufacturing

Change View

Certificates

  • ISO-9001
  • ISO-14001
  • AEO Certification
  • RoHS
  • REACH

MISUMI worldwide

Social Media

Legal notice

Copyright © MISUMI Corporation All Rights Reserved.