Silicon Hoses / Standard / Vacuum
[Features] This silicone hose is reinforced with polyester thread.
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
- Drawing / Specifications
- 3D Preview 3D preview is available after complete configuration
- Part Numbers
- More Information
- Catalog
Hose One End Swaged  Both Ends Swaged  | ■ Structure HOSSW (Standard)  SNHT (Vacuum)  | ■Swage Fitting Shapes
|
| Types | Type | Material | |||||
| Hose only | One End Swaged | Both Ends Swaged | Main Material | Reinforcement | Swage Fittings | ||
| Shape A, B | Shape C | ||||||
| Standard | HOSSW | HOSSWK | HOSSWR | Silicone Rubber | Polyester Yarn | Joint Nipples: EN 1.4301 Equiv. Fitting Cover: Aluminum | Joint Nipples: EN 1.4404 Equiv. Fitting Cover: EN 1.4301 Equiv. |
| Vacuum | SNHT | SNHTK | SNHTR | Silicone Rubber | Polyester Yarn + EN 1.4401 Equiv. Coil | — | Joint Nipples: EN 1.4404 Equiv. Fitting Cover: EN 1.4301 Equiv. |
Specification Table
| Part Number | — | Hose Length | — | Shape L | — | Shape R |
| HOSSW6 HOSSWK1.5S SNHTR2S | — — — | 1.5 2.0 1.0 | — — | LC LC | — | RC |
■Hose Specifications
| No. | HOSSW HOSSW□ | |||||
| I.D. (mm) | O.D. (mm) | Wide (mm) | Min. Bending Radius (mm) | Operating Pressure (MPa) | Operating Temp. Range (°C) | |
| 6 | 6.3 | 12.3 | 3 | 80 | 0 to 1.0 | －30 to 150 |
| 9 | 9.5 | 16 | 3.25 | 100 | 0 to 1.0 | |
| 12 | 12.7 | 19.5 | 3.4 | 130 | 0 to 0.5 | |
| 19 | 19.0 | 28 | 4.5 | 180 | 0 to 0.5 | |
| 1S | 25.4 | 35.5 | 5.05 | 220 | 0 to 0.5 | |
| 1.5S | 38.1 | 50.5 | 6.2 | 310 | 0 to 0.5 | |
| 2S | 50.8 | 64.5 | 6.85 | 550 | 0 to 0.3 | |
| No. | SNHT SNHT□ | |||||
| I.D. (mm) | O.D. (mm) | Wide (mm) | Min. Bending Radius (mm) | Operating Pressure (MPa) | Operating Temp. Range (°C) | |
| 1S | 25.4 | 35.5 | 5.05 | 180 | −0.1 to 0.7 | −30 to 150 |
| 1.5S | 38.1 | 50.5 | 6.2 | 280 | −0.1 to 0.7 | |
| 2S | 50.8 | 64.5 | 6.85 | 390 | −0.1 to 0.3 | |
■Swage Fitting Shapes
| Hose Nominal I.D. | R (PT) G (PF) | Shape A | Shape B | ||
| B (Wrench Flats) | (L) | B (Wrench Flats) | (L) | ||
| 6 | 1/4 | 17 | 37 | 14 | 43 |
| 9 | 3/8 | 19 | 43 | 17 | 47 |
| 12 | 1/2 | 24 | 49 | 22 | 53 |
| 19 | 3/4 | 30 | 59 | 27 | 65 |
| Hose Nominal I.D. | Shape C | ||||
| A | B | C | D | (L) | |
| 1S | 50.5 | 43.5 | 23 | 22 | 56 |
| 1.5S | 50.5 | 43.5 | 35.7 | 34 | 73 |
| 2S | 64 | 56.5 | 47.8 | 46 | 75 |
| Part Number | Hose Length 0.1 m Increments | L Left end swaged shape | R Right end swaged shape | |
| Type | Hose | |||
| Nominal I.D. | ||||
| Standard Type HOSSW (Hose only) HOSSWK (One End Swaged) HOSSWR (Both Ends Swaged) | 6 | 0.3 to 20.0 | LA LB | RA RB |
| 9 | ||||
| 12 | 0.3 to 10.0 | |||
| 19 | ||||
| 1S | 0.6 to 5.0 | LC | RC | |
| 1.5S | ||||
| 2S | ||||
| Vacuum SNHT (Hose only) SNHTK (One End Swaged) SNHTR (Both Ends Swaged) | 1S | 0.6 to 5.0 | LC | RC |
| 1.5S | ||||
| 2S | ||||
Part Number:
- In order to open the 3D preview, the part number must be fixed.
3D preview is not available, because the part number has not yet been determined.
Loading...
| Part Number | Minimum order quantity | Volume Discount | Nominal I.D. | O.D. (mm) | Properties | Mounting Metal Fittings | Swage Fitting Material | Minimum Bending Radius (mm) | Operating Pressure (MPa) | Hose Length (m) | Left End Swaged Fitting Shape | Right End Swaged Fitting Shape | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1 | 7 Days | 1S | 35.5 | Standard Type / Heat Resistance / Low Temp. Resistance | Hose Only | - | 220 | 0～0.5 | 0.6 ～ 5 | - | - | ||
| 1 | 7 Days | 1.5S | 50.5 | Standard Type / Heat Resistance / Low Temp. Resistance | Hose Only | - | 310 | 0～0.5 | 0.6 ～ 5 | - | - | ||
| 1 | 7 Days | 2S | 64.5 | Standard Type / Heat Resistance / Low Temp. Resistance | Hose Only | - | 550 | 0～0.3 | 0.6 ～ 5 | - | - | ||
| 1 | 7 Days | 6 | 12.3 | Heat Resistance / Low Temp. Resistance | Hose Only | - | 80 | 0～1.0 | 0.3 ～ 20 | - | - | ||
| 1 | 7 Days | 9 | 16 | Heat Resistance / Low Temp. Resistance | Hose Only | - | 100 | 0～1.0 | 0.3 ～ 20 | - | - | ||
| 1 | 7 Days | 12 | 19.5 | Heat Resistance / Low Temp. Resistance | Hose Only | - | 130 | 0～0.5 | 0.3 ～ 10 | - | - | ||
| 1 | 7 Days | 19 | 28 | Heat Resistance / Low Temp. Resistance | Hose Only | - | 180 | 0～0.5 | 0.3 ～ 10 | - | - | ||
| 1 | 7 Days | 1S | 35.5 | Standard Type / Heat Resistance / Low Temp. Resistance | One End Swaged | EN 1.4301 Equiv. | 220 | 0～0.5 | 0.6 ～ 5 | Shape C [LC] | - | ||
| 1 | 7 Days | 1.5S | 50.5 | Standard Type / Heat Resistance / Low Temp. Resistance | One End Swaged | EN 1.4301 Equiv. | 310 | 0～0.5 | 0.6 ～ 5 | Shape C [LC] | - | ||
| 1 | 7 Days | 2S | 64.5 | Standard Type / Heat Resistance / Low Temp. Resistance | One End Swaged | EN 1.4301 Equiv. | 550 | 0～0.3 | 0.6 ～ 5 | Shape C [LC] | - | ||
| 1 | 7 Days | 6 | 12.3 | Heat Resistance / Low Temp. Resistance | One End Swaged | EN 1.4301 Equiv. | 80 | 0～1.0 | 0.3 ～ 20 | Shape A [LA] / Shape B [LB] | - | ||
| 1 | 7 Days | 9 | 16 | Heat Resistance / Low Temp. Resistance | One End Swaged | EN 1.4301 Equiv. | 100 | 0～1.0 | 0.3 ～ 20 | Shape A [LA] / Shape B [LB] | - | ||
| 1 | 7 Days | 12 | 19.5 | Heat Resistance / Low Temp. Resistance | One End Swaged | EN 1.4301 Equiv. | 130 | 0～0.5 | 0.3 ～ 10 | Shape A [LA] / Shape B [LB] | - | ||
| 1 | 7 Days | 19 | 28 | Heat Resistance / Low Temp. Resistance | One End Swaged | EN 1.4301 Equiv. | 180 | 0～0.5 | 0.3 ～ 10 | Shape A [LA] / Shape B [LB] | - | ||
| 1 | 7 Days | 1S | 35.5 | Standard Type / Heat Resistance / Low Temp. Resistance | Both Ends Swaged | EN 1.4301 Equiv. | 220 | 0～0.5 | 0.6 ～ 5 | Shape C [LC] | Shape C [RC] | ||
| 1 | 7 Days | 1.5S | 50.5 | Standard Type / Heat Resistance / Low Temp. Resistance | Both Ends Swaged | EN 1.4301 Equiv. | 310 | 0～0.5 | 0.6 ～ 5 | Shape C [LC] | Shape C [RC] | ||
| 1 | 7 Days | 2S | 64.5 | Standard Type / Heat Resistance / Low Temp. Resistance | Both Ends Swaged | EN 1.4301 Equiv. | 550 | 0～0.3 | 0.6 ～ 5 | Shape C [LC] | Shape C [RC] | ||
| 1 | 7 Days | 6 | 12.3 | Heat Resistance / Low Temp. Resistance | Both Ends Swaged | EN 1.4301 Equiv. | 80 | 0～1.0 | 0.3 ～ 20 | Shape A [LA] / Shape B [LB] | Shape A [RA] / Shape B [RB] | ||
| 1 | 7 Days | 9 | 16 | Heat Resistance / Low Temp. Resistance | Both Ends Swaged | EN 1.4301 Equiv. | 100 | 0～1.0 | 0.3 ～ 20 | Shape A [LA] / Shape B [LB] | Shape A [RA] / Shape B [RB] | ||
| 1 | 7 Days | 12 | 19.5 | Heat Resistance / Low Temp. Resistance | Both Ends Swaged | EN 1.4301 Equiv. | 130 | 0～0.5 | 0.3 ～ 10 | Shape A [LA] / Shape B [LB] | Shape A [RA] / Shape B [RB] | ||
| 1 | 7 Days | 19 | 28 | Heat Resistance / Low Temp. Resistance | Both Ends Swaged | EN 1.4301 Equiv. | 180 | 0～0.5 | 0.3 ～ 10 | Shape A [LA] / Shape B [LB] | Shape A [RA] / Shape B [RB] | ||
| 1 | 7 Days | 25 | 35.5 | Heat Resistance / Low Temp. Resistance / Vacuum Type | Hose Only | - | 180 | -0.1～0.7 | 0.6 ～ 5 | - | - | ||
| 1 | 7 Days | 38 | 50.5 | Heat Resistance / Low Temp. Resistance / Vacuum Type | Hose Only | - | 280 | -0.1～0.7 | 0.6 ～ 5 | - | - | ||
| 1 | 7 Days | 50 | 64.5 | Heat Resistance / Low Temp. Resistance / Vacuum Type | Hose Only | - | 390 | -0.1～0.3 | 0.6 ～ 5 | - | - | ||
| 1 | 7 Days | 25 | 35.5 | Heat Resistance / Low Temp. Resistance / Vacuum Type | One End Swaged | EN 1.4404 Equiv. | 180 | -0.1～0.7 | 0.6 ～ 5 | Shape C [LC] | - | ||
| 1 | 7 Days | 38 | 50.5 | Heat Resistance / Low Temp. Resistance / Vacuum Type | One End Swaged | EN 1.4404 Equiv. | 280 | -0.1～0.7 | 0.6 ～ 5 | Shape C [LC] | - | ||
| 1 | 7 Days | 50 | 64.5 | Heat Resistance / Low Temp. Resistance / Vacuum Type | One End Swaged | EN 1.4404 Equiv. | 390 | -0.1～0.3 | 0.6 ～ 5 | Shape C [LC] | - | ||
| 1 | 7 Days | 25 | 35.5 | Heat Resistance / Low Temp. Resistance / Vacuum Type | Both Ends Swaged | EN 1.4404 Equiv. | 180 | -0.1～0.7 | 0.6 ～ 5 | Shape C [LC] | Shape C [RC] | ||
| 1 | 7 Days | 38 | 50.5 | Heat Resistance / Low Temp. Resistance / Vacuum Type | Both Ends Swaged | EN 1.4404 Equiv. | 280 | -0.1～0.7 | 0.6 ～ 5 | Shape C [LC] | Shape C [RC] | ||
| 1 | 7 Days | 50 | 64.5 | Heat Resistance / Low Temp. Resistance / Vacuum Type | Both Ends Swaged | EN 1.4404 Equiv. | 390 | -0.1～0.3 | 0.6 ～ 5 | Shape C [LC] | Shape C [RC] |
Loading...
Specifications/Overview
■Features of HOSSW (Standard)
·The spirally knitted pressure-resistant reinforcement wire prevents burst due to wire failure near couplings.
·Semi-transparent wall enables the transfer of materials to be observed.
·Excellent in cold resistance and heat resistance.
· Conforms to Food Sanitation Laws
·FDA compliant
■Features of SNHT (Vacuum)
·Provides high level of deformation resistance to enable force-feed and vacuum.
·Semi-transparent wall enables the transfer of materials to be observed.
·Excellent in cold resistance and heat resistance.
· Conforms to Food Sanitation Laws.
·FDA compliant.
■ CAUTION
·Avoid long time use with non-polar organic solvents (benzene, toluene, hexane, etc.), halogenated hydrocarbon (methylene chloride, trichloroethane, etc.), strongly acid condensed agent, strong alkali solution, mineral oil, steam (long-time use) or use with 70˚C or hotter animal and vegetable oil.
·Clean inside the hose before using with drinking water or food.
·For food plumbing, metal shape C is recommended for its safety in sanitary respect.
·When steam cleansing, apply saturated steam at 0.2 MPa or lower for a short time.
·Do not soak hoses or fittings in drinking water, food or fluids.
Fluid may remain behind the fitting and unwanted bacteria may adhere to it.
·Do not use silicone hoses with high-temperature water exceeding 100°C (for temperature controller piping, etc.).
·The spirally knitted pressure-resistant reinforcement wire prevents burst due to wire failure near couplings.
·Semi-transparent wall enables the transfer of materials to be observed.
·Excellent in cold resistance and heat resistance.
· Conforms to Food Sanitation Laws
·FDA compliant
■Features of SNHT (Vacuum)
·Provides high level of deformation resistance to enable force-feed and vacuum.
·Semi-transparent wall enables the transfer of materials to be observed.
·Excellent in cold resistance and heat resistance.
· Conforms to Food Sanitation Laws.
·FDA compliant.
■ CAUTION
·Avoid long time use with non-polar organic solvents (benzene, toluene, hexane, etc.), halogenated hydrocarbon (methylene chloride, trichloroethane, etc.), strongly acid condensed agent, strong alkali solution, mineral oil, steam (long-time use) or use with 70˚C or hotter animal and vegetable oil.
·Clean inside the hose before using with drinking water or food.
·For food plumbing, metal shape C is recommended for its safety in sanitary respect.
·When steam cleansing, apply saturated steam at 0.2 MPa or lower for a short time.
·Do not soak hoses or fittings in drinking water, food or fluids.
Fluid may remain behind the fitting and unwanted bacteria may adhere to it.
·Do not use silicone hoses with high-temperature water exceeding 100°C (for temperature controller piping, etc.).
Basic information
| Applicable Fluid / Usage | Water / Air / Special factory requirements | Cutting Service Usage | Yes | Hose Material | Silicone Rubber |
|---|---|---|---|---|---|
| Color | Milky White | Operating Temperature Range(℃) | -30::150 |
Configure
Basic Attributes
-
Nominal I.D.
-
O.D.(mm)
-
Properties
- Standard Type
- Heat Resistance
- Low Temp. Resistance
- Vacuum Type
-
Mounting Metal Fittings
- Hose Only
- One End Swaged
- Both Ends Swaged
-
Swage Fitting Material
- EN 1.4301 Equiv.
- EN 1.4404 Equiv.
-
Minimum Bending Radius(mm)
-
Hose Length(m)
-
Left End Swaged Fitting Shape
- Shape A [LA]
- Shape B [LB]
- Shape C [LC]
-
Right End Swaged Fitting Shape
- Shape A [RA]
- Shape B [RB]
- Shape C [RC]
-
Type
- HOSSW
- HOSSWK
- HOSSWR
- SNHT
- SNHTK
- SNHTR
-
Filter by CAD data type
- 2D
- 3D
Filter by standard shipping days
-
- All
- 7 Days or Less
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Complementary Products
-
Fittings for Hoses / 90 Deg. Elbow / Threaded / Barbed
MISUMI Standard Price : 10.83 € Shipping Days: Same day
-
Fittings for Hoses / Nipples / Threaded / Barbed
MISUMI Standard Price : 2.39 € Shipping Days: Same day
Tech Support
- Technical Support
- Tel：+49 69 668173-0 / FAX：+49 69 668173-360
- Technical Inquiry
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.