5 Series / slot width 6 / Curved Aluminum Extrusions
(i)Remark
- Cutting is free for this product. Please specify the length you prefer.
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
- Drawing / Specifications
- 3D Preview 3D preview is available after complete configuration
- Part Numbers
- Catalog
- Technical Information
Dimensional Drawing
HFSMG5 HFSFMG5 [ ! ]
[!] When R = 140, the extrusion slot may be deformed and becomes narrower in width at the spot where the extrusion is bent. Therefore, slot nut cannot be used.
[ ! ] Bending is applied after anodizing; therefore, bent section may slightly discolor and becomes white.
[ ! ] When tapped hole alterations are specified, the red circles on the outline drawing of the aluminum extrusion will be machined.
[!] When R = 140, the extrusion slot may be deformed and becomes narrower in width at the spot where the extrusion is bent. Therefore, slot nut cannot be used.
[ ! ] Bending is applied after anodizing; therefore, bent section may slightly discolor and becomes white.
[ ! ] When tapped hole alterations are specified, the red circles on the outline drawing of the aluminum extrusion will be machined.
| 5 Series |
 |
* No tolerance is specified for fixed length extrusions
[M]Material: EN AW-6061-T5 Equiv.
[S]Surface Treatment: Clear Anodize
[S]Surface Treatment: Clear Anodize
Specification Table
| Part Number | — | A | — | B | — | R |
| HFSMG5−2020 | — | A350 | — | B700 | — | R140 |
| Part Number | A 1 mm Increments | B 1 mm Increments | R* | |
| Type | No. | |||
| HFSMG HFSFMG | 5−2020 | 200 to 1500 | 200 to 1000 | 140 300* 500* |
| Type | Series | Mass kg/m | Sectional Area mm2 | Cross Sectional Moment of Inertia mm4 | |
| ℓx | ℓy | ||||
| HFSMG HFSFMG | HFS5 | 0.50 | 183 | 0.742 × 104 | 0.742 × 104 |
Alterations
[ ! ] MISUMI configurable length aluminum extrusion product can be utilized for structure building with highly enhanced design flexibility when the following various alteration options are applied.Some alterations are not applicable depending on types and sizes.
| Part Number | — | A | — | B | — | R | — | (LTP, RTP, TPW, etc.) |
| HFSMG5−2020 | — | A400 | — | B500 | — | R140 | — | LTP−LMH |
| Alterations | Tap | M Hole | |||||
| Code | LTP | RTP | TPW | LMH | LMV | RMH | RMV |
Spec. [ ! ] When tapping and M type hole alteration are both specified, the depth of tapping hole will be up to M Hole. | Tapping to the center hole. Tap Shape M5 Depth 15 LTP: Tapping on the Left End Face RTP: Tapping on the Bottom End Face TPW: Tapping on Both Ends Example: LTP  | Drilling of M Holes in the specified direction. Can be connected with Center Joint and Post-Assembly Insertion Double Joint. LMH, RMH:M hole is machined on the left (bottom) of the extrusion from the horizontal direction. Example: LMH  LMV, RMV: Adds a hole on the left (bottom) of the extrusion in the vertical (right) direction. Example: RMV  [ NG ] LMV and RMV are not applicable to HFSFMG. | |||||
| Applicable Extrusion | |||||||
| HFSMG5−2020 HFSFMG5−2020 | |||||||
| Type | Alterations | Alteration Codes | App. Example | Contents |
|---|---|---|---|---|
| > End Tapping | End Tapping (Center Hole) | LTP/RTP/TPW LHP/RHP/HPW |  | Adds tapped holes on extrusion ends. Blind Joints which require this alteration (Screw Joint / Simple Joint) |
| > Blind Joints Dedicated Holes | M Hole | LMH |  | Adds required holes for Post-Assembly Insertion Double Joints, Center Joint connections. (Post-Assembly Insertion Double Joint / Center Joint) |
Part Number:
- In order to open the 3D preview, the part number must be fixed.
3D preview is not available, because the part number has not yet been determined.
Loading...
Part Number
|
|---|
| HFSFMG5-2020-A[200-1500/1]-B[200-1000/1]-R[140,300,500] |
| HFSMG5-2020-A[200-1500/1]-B[200-1000/1]-R[140,300,500] |
| Part Number | Minimum order quantity | Volume Discount | RoHS | A (mm) | B (mm) | R (mm) | |
|---|---|---|---|---|---|---|---|
| 1 | 9 Days | 10 | 200 ～ 1500 | 200 ～ 1000 | 140 ～ 500 | ||
| 1 | 9 Days | 10 | 200 ～ 1500 | 200 ～ 1000 | 140 ～ 500 |
Loading...
Basic information
| Standard Extrusion Size(mm) | 20 | Extrusion Series | 5 Series | Extrusion Type | Bent Type |
|---|---|---|---|---|---|
| Extrusion Type | HFS (Standard) | Surface Treatment | Clear Anodize | Surface Milled | Not Provided |
| Material | EN AC-51400-T5 Equiv. | Extrusion Size: Width (A)(mm) | 20 | Extrusion Size: Thickness (T)(mm) | 20 |
| L Dimension Fixed, Specified | Configuration |
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Complementary Products
-
5 Series (Groove Width 6 mm), for 1-Row Groove, Reversing Bracket With Protrusion
MISUMI Standard Price : 0.79 € Shipping Days: Same day
Tech Support
- Technical Support
- Tel：+49 69 668173-0 / FAX：+49 69 668173-360
- Technical Inquiry
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.