Aluminum Extrusions -With Screw Joint Pre-assembled
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
JFSC5－2020 L
(Left End Face Screw Joint Pre-Inserted Type)
JFSC5－2020W
(Double End Face Screw Joints Pre-Inserted Type)
| Part Name | [M] Material | [S] Surface Treatment | |
| Aluminum Extrusion | EN AW−6061−T5 Equiv. | Anodize | |
| Screw Joints | Screw | EN 1.7220 Equiv. | Trivalent Chromate |
| Joint Plate | EN 1.0330 Equiv. | ||
Specification Table
| Part Number | — | L |
| JFSC5－2020W | — | 1200 |
| Part Number | Joint Component | L 0.5 mm Increments | Extrusion | Built-in Joint Component | A | Wrench required when tightening. | ||
| Screw Joints | Quantity | |||||||
| JFSC | 5−2020 | L (Left End Face only) | 100 to 4000 | HFS5−2020 | HCJ5 | 1 | 20 | For M5 |
| W (Double End Faces) | 2 | |||||||
Alterations
[ ! ] Alterations only on this page are available.
| Alterations | Code | Spec. | ||
| Extrusion | Tap | Depth | ||
| Right End Face Tapping [ ! ] JFS□□－□□□□L | RTP Right End Face  | 5−2020 | M5 | 15 |
| Alterations | Code | Spec. | ||
| Extrusion | H | Hole Dia. | ||
| Right End Face Wrench Hole [ ! ] JFSC□－□□□□L | RCH RCV  | 5−2020 | 10 | 7.35 |
Connecting method
[ ! ] Wrench holes are necessary on the mating extrusion.
Reference
- Aluminum extrusion HFS5-2020 is used.
- When using other aluminum extrusions, please purchase the extrusion and simple joint separately.
Product Comparison Information
■5 Series Blind Joints
| Product Name | Screw Joints | Tapping Joints | Center Joints | Post-Assembly Insertion Double Joints | Parallel Joints |
|---|---|---|---|---|---|
| Product Photo |
|
|
|
|
|
| Installation Diagram |
|
|
|
|
|
| Material | Steel or EN 1.4301 Equiv. | JIS−SWCH18A | EN 1.4308 Equiv. | EN 1.4308 Equiv./EN 1.4301 Equiv. | EN 1.4308 Equiv./EN 1.4301 Equiv. |
| Features | Joint Plate enables secure and economical connection. | Tapping alteration is not required. Most economical Blind Joints. | Most standard Blind Joints usable with various types of aluminum extrusions. | Connects securely at two locations. Tightest connection can be achieved of all Blind Joints. | Extrusions can be connected in parallel. |
| In the Extrusion Alterations required | Tapping / Wrench Hole | Wrench Hole | M Hole | M Hole | L Hole |
| Aluminum Extrusions with Built-in Joints | Viewing | - | Aluminum Extrusions with Built-in Center Joints | - | - |
Part Number
|
|---|
| JFSC5-2020L-[100-4000/0.5] |
| JFSC5-2020W-[100-4000/0.5] |
| Part Number | Minimum order quantity | Volume Discount | RoHS | Series Name | Extrusion No. | Joint Components Built-in | L (mm) | |
|---|---|---|---|---|---|---|---|---|
| 1 | 6 Days | 10 | Brackets for 5 Series (Extrusion Slot Width 6mm) | 5-2020 | L (Left End Face only) | 100 ～ 4000 | ||
| 1 | 6 Days | 10 | Brackets for 5 Series (Extrusion Slot Width 6mm) | 5-2020 | W (Double End Faces) | 100 ～ 4000 |
Loading...
Specifications / Overview
Basic information
| Material | EN AC-51400-T5 Equiv. | Extrusion Series | HFS | Type | Screw Joint Type |
|---|
Configure
Basic Attributes
-
Extrusion No.
-
Joint Components Built-in
- L (Left End Face only)
- W (Double End Faces)
-
L(mm)
-
Type
- JFSC
-
Series Name
- Brackets for 5 Series (Extrusion Slot Width 6mm)
- Brackets for 6 Series (Extrusion Slot Width 8mm)
- Brackets for 8 Series (Extrusion Slot Width 10mm)
- Brackets for 8-45 Series (Extrusion Slot Width 10mm)
-
Filter by CAD data type
- 2D
Filter by standard shipping days
-
- All
- 6 Days or Less
- 10 Days or Less
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Complementary Products
Tech Support
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.