Blind Joint Components -Parallel Joint
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
- Drawing / Specifications
- 3D Preview 3D preview is available after complete configuration
- Part Numbers
- More Information
- Technical Information
(2)-1 Pre-Assembly Insertion Parallel Post
(2)-2 Post-Assembly Insertion Parallel Post
| Part Name | [M] Material | [S] Surface Treatment |
| Pre-Assembly Insertion Parallel Post | EN 1.4308 Equiv. | — |
| Post-Assembly Insertion Parallel Post | ||
| Joint Guide | EN 1.4301 Equiv. | |
| Set Screw | EN 1.7220 Equiv. | Black Oxide Film |
Specification Table
| Part Number |
| HLJ5 |
| Part Number | Accessory | ||||||
| Type | No. | (1)(2) Parallel Post | Quantity | (3) Joint Guide | Quantity | (4) Set Screw | Quantity |
| HLJ (Pre-Assembly Insertion Type) | 5 | Pre-Assembly Insertion Parallel Post 5 | 1 | 5 | 1 | M4 × 8 | 1 |
| HALJ (Post-Assembly Insertion Type) | Post-Assembly Insertion Parallel Post 5 | ||||||
| Applicable Extrusion No. | [Exception]Extrusion Not Available | |||
| 5−2020*1 | 5−2040 | 5−2060 | 5−2080 | * 1HFSH and HFSC are not applicable since L holes cannot be added. |
| 5−4040 | 5−4060 | 5−4080 | ||
Connecting method
| Alterations required for aluminum extrusions |
|---|
| L Hole Machining |
| Step | Front View | Side View | Description |
|---|---|---|---|
| 1 |  |  | Mount a parallel post to the extrusion (A). (Post-Assembly Insertion Type can be inserted by turning from upside of the slot.) * Parallel Post is for Standard Type and With Rotation Stopper Type. |
| 2 |  |  | Insert a Joint Guide into the extrusion (B) with L HolesAligning of the holes is not required. |
| 3 |  |  | Move the plate (A) close to the plate (B) while putting the parallel post through the through hole of joint guide. |
| 4 |  |  | Tighten the set screw to the side of joint guide. |
| 5 |  |  | When the set screw is tightened against the V groove on the post, the extrusions (A) and (B) will pull together and be bound. |
- Connecting extrusions with 2 or more slots on one side:
Insert joint guide from the both ends of L hole, then connect with two or more parallel joints. - Connecting extrusions with 3 or more slots
L holes are added on the outside rows only. Not applicable on rows in the middle.
- As long as interference between each joint does not occur, multiple extrusions can be connected.
Allowable load data is not available. Use multiple connections when strength is required.
| 5 Series Part Number Example | Extrusion A | Extrusion B | Parallel Joints |
|---|---|---|---|
| HFS5-2020-300 | HFS5-2020-300-JLP250-H2 | HLJ5 × 2 pcs. |
Product Comparison Information
■5 Series Blind Joints
| Product Name | Parallel Joints | Tapping Joints | Screw Joints | Center Joints | Post-Assembly Insertion Double Joints | Parallel Joints |
|---|---|---|---|---|---|---|
| Product Photo |  |  |  |  |  | |
| Installation Diagram |  |  |  |  |  | |
| Material | EN 1.4308 Equiv./EN 1.4301 Equiv. | JIS−SWCH18A | Steel or EN 1.4301 Equiv. | EN 1.4308 Equiv. | EN 1.4308 Equiv./EN 1.4301 Equiv. | EN 1.4308 Equiv./EN 1.4301 Equiv. |
| Features | Extrusions can be connected in parallel. | Tapping alteration is not required. Most economical Blind Joints. | Joint Plate enables secure and economical connection. | Most standard Blind Joints usable with various types of aluminum extrusions. | Connects securely at two locations. Tightest connection can be achieved of all Blind Joints. | Extrusions can be connected in parallel. |
| In the Extrusion Alterations required | L Hole | Wrench Hole | Tapping / Wrench Hole | M Hole | M Hole | L Hole |
Part Number:
- In order to open the 3D preview, the part number must be fixed.
3D preview is not available, because the part number has not yet been determined.
Part Number
|
|---|
| HALJ8 |
| HLJ8 |
| Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | RoHS | Series Name | Extrusion No. | Mounting Type | |
|---|---|---|---|---|---|---|---|---|
6.17 € | 1 | Available | 5 Days | 10 | Brackets for 8 Series (Extrusion Slot Width 10mm) | 8 | Post-Assembly Insertion Type | |
6.17 € | 1 | Available | 5 Days | 10 | Brackets for 8 Series (Extrusion Slot Width 10mm) | 8 | Pre-Assembly Insertion Type |
Loading...
App. Example
Basic information
| Material | EN 1.4301 Equiv. | Joint Kit Type | Parallel Joint Kits |
|---|
Configure
Basic Attributes
-
Extrusion No.
-
Mounting Type
- Post-Assembly Insertion Type
- Pre-Assembly Insertion Type
-
Type
- HALJ
- HLJ
-
Series Name
- Brackets for 5 Series (Extrusion Slot Width 6mm)
- Brackets for 6 Series (Extrusion Slot Width 8mm)
- Brackets for 8 Series (Extrusion Slot Width 10mm)
-
Filter by CAD data type
- 2D
- 3D
Filter by standard shipping days
-
- All
- 5 Days or Less
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Complementary Products
-
Blind Joint Parts - Nut for Pre-Assembly Double Joint
MISUMI Standard Price : 1.82 € Shipping Days: 5 Days
-
Blind Joint: Post Assembly Insertion Double Joint Kit
MISUMI Standard Price : 4.27 € Shipping Days: Same day
Tech Support
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.