Conveyor Roller Shaft Holders
- Volume Discount
- Order quantities extended (D-JIT)
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
- Drawing / Specifications
- 3D Preview 3D preview is available after complete configuration
- Part Numbers
- More Information
- Catalog
- Technical Information
HSCX6-25[Detailed Dimensions and Pitches][Extrusion Installation Example]
HSCX6-300
[ ! ] When using a shaft of ø12, reverse the top and the bottom.
HSCX6-300
[ ! ] When using a shaft of ø12, reverse the top and the bottom.
[M]Material: Glass Fiber Reinforced ABS Resin
Specification Table
| Part Number | — | L |
| HSCX6 | — | 300 |
| Part Number | L | Applicable Extrusion (Series) | Applicable Roller Shaft Dia. | |
| Type | No. | |||
| HSCX | 6 | 25 | 6 Series | ⌀6 ⌀8 ⌀12 |
| 300 | ||||
Part Number:
- In order to open the 3D preview, the part number must be fixed.
3D preview is not available, because the part number has not yet been determined.
Loading...
Loading...
Specifications / Overview
[Section View]
·In the edge part, use post-assembly lock nuts or frames as stoppers.
It prevents the conveyor roller shaft holder from falling out of the extrusion.
·In the edge part, use post-assembly lock nuts or frames as stoppers.
It prevents the conveyor roller shaft holder from falling out of the extrusion.
App. Example
(1) Insert Conveyor Roller Shaft Holders
in the slots of the extrusion.
(2) Insert a shaft on a conveyor
roller and fit the shaft in the
roller by pushing from above.
(3) With joint use of plastic covers,
a carrier line can be easily made.
Basic information
| Type | Conveyor Roller Shaft Holders | Material | Glass Fiber Reinforced ABS Resin Resin |
|---|
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Complementary Products
Tech Support
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.