Pneumatic Module Units Vertical / Linear Bushings Type
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
- Drawing / Specifications
- 3D Preview 3D preview is available after complete configuration
- Part Numbers
- More Information
- Catalog
- Technical Information
| MAT25 MAT32 MAT40 MAT50 MAT63 |  |
■ Components
| Parts | Base | Slider | Related Connecting Parts |
| Material | EN AW−6063 Equiv. | EN AW−6063 Equiv. | Stainless Steel |
| Surface Treatment | Clear Anodize | Clear Anodize | — |
1. Select "W/o Cylinder" type to mount other manufacturer's cylinders.
2. Compatible cylinder diameters are ø25, ø32, ø40, ø50 and ø63.
3. MAT25 is the only option for S Type. (MAT25 (S))
4. S Type shaft diameter is ø16. (See the Components List below.)
Specification Table
| Part Number | — | S | — | P | — | L |
| MAT25NN | — | 30 | — | 120 | — | 180 |
■Specifications List
| Part Number | Specifications | ||
| Type | No. | Cylinder | Base |
| MAT25 MAT32 MAT40 MAT50 MAT63 | NN (S) | N (w/o) | N (w/o) |
| NB (S) | N (w/o) | B (w/) | |
| CN (S) | C (w/) | N (w/o) | |
| CB (S) | C (w/) | B (w/) | |
■Module Components
For the details of above components, please confirm on the respective catalog pages.
(*1) C and Cd dimensions are the dimensions when "With cylinder" is selected. CN (CNS) and CB (CBS) are applicable.
(*2) Base dimensions are those when "With base" is selected. CN (CNS) and CB (CBS) are applicable.
■ Mass
| Part Number | Component Name | |||||||
| Type | No. | Cylinder | Linear Shafts | Floating Joint | Linear Bushings | Retaining Ring | Shaft Collar | Stand Bracket |
| MAT25 | NNS·NBS | — | PSFJZ16 (Shaft Dia. 16) | FJUCS10 | LMU16 | RTWS28 | SSCSPDJ16 | PFPM16 |
| CNS·CBS | MSCCA25 | |||||||
| NN・NB | — | PSFJZ20 (Shaft Dia. 20) | LMU20 | RTWS32 | SSCSPDJ20 | PFPM20 | ||
| CN・CB | MSCCA25 | |||||||
| MAT32 | NN・NB | — | PSFJZ25 (Shaft Dia. 25) | FJUCS14 | LMU25 | RTWS40 | SSCSPDJ25 | PFPM25 |
| CN・CB | MSCCA32 | |||||||
| MAT40 | NN・NB | — | ||||||
| CN・CB | MSCCA40 | |||||||
| MAT50 | NN・NB | — | FJUCS18 | |||||
| CN・CB | MSCCA50 | |||||||
| MAT63 | NN・NB | — | ||||||
| CN・CB | MSCCA63 | |||||||
| Part Number | Selection | C Note 1 | CB | Cd Note 1 | Cm | Cp | Slider Dimension | Stand Mounting Dimension | Base Dimension (When With Base Type is selected) Note 2 | SD | ||||||||||||||||||||
| Type | No. | S | P | L (10 mm Increments) | a | b | c | e | SB | SP1 | SP2 | SW | t | t1 | t2 | d | f | w | B | B1 | D1 | t3 | W | W1 | ||||||
| MAT25 | NNS NBS CNS CBS | 30 50 | 120 | 120 to 250 (S = 30) 160 to 250 (S = 50) | 32.5 | 17 | M5 | 5 | 28 | 40 | 15 | — | 60 | 50 | 70 | 130 | 160 | 46 | 25 | 12 | 5.5 | 32 | 20 | 60 | 50 | 6.6 | 12 | 184 | 172 | 35 |
| MAT25 | NN NB CN CB | 30 50 | 120 | 120 to 300 (S = 30) 160 to 300 (S = 50) | 32.5 | 17 | M5 | 5 | 28 | 40 | 15 | — | 60 | 50 | 70 | 130 | 160 | 46 | 25 | 12 | 6.6 | 35 | 25 | 60 | 50 | 6.6 | 12 | 184 | 172 | 40 |
| 150 | 60 | 10 | 20 | 80 | 100 | 170 | 200 | 52 | 27 | 15 | 75 | 60 | 240 | 220 | ||||||||||||||||
| 200 | 80 | 100 | 140 | 226 | 256 | 60 | 32 | 17 | 288 | 270 | ||||||||||||||||||||
| MAT32 | 150 | 33 | 27 | Rc 1/8 | 5 | 34 | 60 | 10 | 20 | 80 | 68 | 100 | 170 | 200 | 52 | 27 | 15 | 9 | 45 | 35 | 75 | 60 | 9 | 12 | 240 | 220 | 45 | |||
| 200 | 80 | 100 | 140 | 226 | 256 | 60 | 32 | 17 | 288 | 270 | ||||||||||||||||||||
| MAT40 | 150 | 39.5 | 27 | Rc 1/8 | 6 | 40 | 60 | 10 | 20 | 80 | 68 | 100 | 170 | 200 | 52 | 27 | 15 | 9 | 45 | 35 | 75 | 60 | 9 | 12 | 240 | 220 | 45 | |||
| 200 | 80 | 100 | 140 | 226 | 256 | 60 | 32 | 17 | 288 | 270 | ||||||||||||||||||||
| MAT50 | 200 | 40.5 | 32 | Rc 1/4 | 8 | 50 | 80 | 10 | 20 | 100 | 72 | 140 | 226 | 256 | 60 | 32 | 17 | 9 | 45 | 35 | 100 | 80 | 11 | 15 | 288 | 270 | 45 | |||
| MAT63 | 200 | 46 | 32 | Rc 1/4 | 10 | 60 | 80 | 10 | 20 | 100 | 72 | 140 | 226 | 256 | 60 | 32 | 17 | 9 | 45 | 35 | 100 | 80 | 11 | 15 | 288 | 270 | 45 | |||
(*2) Base dimensions are those when "With base" is selected. CN (CNS) and CB (CBS) are applicable.
■ Mass
| Part Number | Mass (kg) | ||||||||||||||||
| Type | No. | Cylinder Stroke S = 30 | Cylinder Stroke S = 50 | ||||||||||||||
| L = 120 to 200 | L = 210 to 250 | L = 260 to 300 | L = 160 to 200 | L = 210 to 250 | L = 260 to 300 | ||||||||||||
| P Slider Pitch | P Slider Pitch | P Slider Pitch | P Slider Pitch | P Slider Pitch | P Slider Pitch | ||||||||||||
| 120 | 150 | 200 | 120 | 150 | 200 | 150 | 200 | 120 | 150 | 200 | 120 | 150 | 200 | 150 | 200 | ||
| MAT25 | NNS | 2.2 | — | — | 2.3 | — | — | — | — | 2.2 | — | — | 2.3 | — | — | — | — |
| NBS | 2.5 | — | — | 2.7 | — | — | — | — | 2.5 | — | — | 2.7 | — | — | — | — | |
| CNS | 2.5 | — | — | 2.6 | — | — | — | — | 2.6 | — | — | 2.7 | — | — | — | — | |
| CBS | 2.9 | — | — | 3.0 | — | — | — | — | 3.0 | — | — | 3.1 | — | — | — | — | |
| NN | 2.7 | 3.1 | 3.8 | 3.0 | 3.4 | 4.0 | 3.6 | 4.3 | 2.7 | 3.1 | 3.8 | 3.0 | 3.4 | 4.0 | 3.6 | 4.3 | |
| NB | 3.1 | 3.8 | 4.5 | 3.4 | 4.0 | 4.8 | 4.2 | 5.0 | 3.1 | 3.8 | 4.5 | 3.4 | 4.0 | 4.8 | 4.2 | 5.0 | |
| CN | 3.1 | 3.5 | 4.1 | 3.3 | 3.7 | 4.3 | 3.9 | 4.6 | 3.1 | 3.5 | 4.2 | 3.4 | 3.8 | 4.4 | 4.0 | 4.7 | |
| CB | 3.5 | 4.1 | 4.9 | 3.7 | 4.3 | 5.1 | 4.6 | 5.4 | 3.5 | 4.2 | 4.9 | 3.8 | 4.4 | 5.2 | 4.7 | 5.4 | |
| MAT32 | NN | — | 5.0 | 5.9 | — | 5.4 | 6.3 | 5.8 | 6.7 | — | 5.0 | 5.9 | — | 5.4 | 6.3 | 5.8 | 6.7 |
| NB | — | 5.8 | 6.8 | — | 6.2 | 7.1 | 6.5 | 7.5 | — | 5.8 | 6.8 | — | 6.2 | 7.1 | 6.5 | 7.5 | |
| CN | — | 5.5 | 6.4 | — | 5.9 | 6.7 | 6.3 | 7.1 | — | 5.6 | 6.5 | — | 6.0 | 6.8 | 6.4 | 7.2 | |
| CB | — | 6.2 | 7.2 | — | 6.6 | 7.6 | 7.0 | 8.0 | — | 6.3 | 7.3 | — | 6.7 | 7.7 | 7.1 | 8.1 | |
| MAT40 | NN | — | 5.0 | 5.9 | — | 5.4 | 6.3 | 5.8 | 6.7 | — | 5.0 | 5.9 | — | 5.4 | 6.3 | 5.8 | 6.7 |
| NB | — | 5.8 | 6.8 | — | 6.1 | 7.1 | 6.5 | 7.5 | — | 5.8 | 6.8 | — | 6.1 | 7.1 | 6.5 | 7.5 | |
| CN | — | 5.5 | 6.4 | — | 5.9 | 6.8 | 6.3 | 7.2 | — | 5.6 | 6.5 | — | 6.0 | 6.9 | 6.4 | 7.3 | |
| CB | — | 6.3 | 7.3 | — | 6.6 | 7.6 | 7.0 | 8.0 | — | 6.4 | 7.4 | — | 6.7 | 7.7 | 7.1 | 8.1 | |
| MAT50 | NN | — | — | 6.6 | — | — | 7.0 | — | 7.4 | — | — | 6.6 | — | — | 7.0 | — | 7.4 |
| NB | — | — | 7.9 | — | — | 8.3 | — | 8.7 | — | — | 7.9 | — | — | 8.3 | — | 8.7 | |
| CN | — | — | 7.3 | — | — | 7.7 | — | 8.0 | — | — | 7.5 | — | — | 7.9 | — | 8.3 | |
| CB | — | — | 8.6 | — | — | 8.9 | — | 9.3 | — | — | 8.8 | — | — | 9.2 | — | 9.6 | |
| MAT63 | NN | — | — | 6.6 | — | — | 7.0 | — | 7.4 | — | — | 6.6 | — | — | 7.0 | — | 7.4 |
| NB | — | — | 7.9 | — | — | 8.3 | — | 8.7 | — | — | 7.7 | — | — | 8.3 | — | 8.7 | |
| CN | — | — | 7.7 | — | — | 8.1 | — | 8.5 | — | — | 7.9 | — | — | 8.2 | — | 8.6 | |
| CB | — | — | 9.0 | — | — | 9.4 | — | 9.8 | — | — | 9.2 | — | — | 8.5 | — | 9.9 | |
■Accuracy
1. Measurement reference is Axis A
2. Mount the load on Surface e, and apply the mass of 3 kg at 70 mm from the shaft center to measure
3. Accuracy does not vary by difference in cylinder stroke
4. Running parallelism values are for reference only
| Part Number | Running Parallelism to Reference Axis (Upright) | |||||
| Type | Under No Load | Under Load (Reference) | ||||
| Slider Pitch | Slider Pitch | |||||
| 120 | 150 | 200 | 120 | 150 | 200 | |
| MAT25 (S) | 0.07 | — | — | 0.08 | — | — |
| MAT25 | 0.07 | 0.07 | 0.07 | 0.10 | 0.10 | 0.10 |
| MAT32 | — | 0.07 | 0.07 | — | 0.10 | 0.10 |
| MAT40 | — | 0.07 | 0.07 | — | 0.10 | 0.10 |
| MAT50 | — | — | 0.07 | — | — | 0.10 |
| MAT63 | — | — | 0.07 | — | — | 0.10 |
2. Mount the load on Surface e, and apply the mass of 3 kg at 70 mm from the shaft center to measure
3. Accuracy does not vary by difference in cylinder stroke
4. Running parallelism values are for reference only
Alterations
| Part Number | — | S | — | P | — | L | — | (NSC·AS) |
| MAT25NN | — | 30 | — | 120 | — | 180 | — | NSC |
| Alteration | Code | Spec. |
| W/o Shaft Collar | NSC | Excluding Shaft Collar. |
| With Auto Switches | AS | Auto switches are included Part Number MD11L3, 2 pcs. [ ! ] Applicable to cylinder units only |
Part Number:
- In order to open the 3D preview, the part number must be fixed.
3D preview is not available, because the part number has not yet been determined.
Loading...
| Part Number | Minimum order quantity | Volume Discount | Load Capacity (Range) (N) | L (mm) | Cylinders | Base | Cylinder Bore Dia. (Ø) | Linear Shaft Dia. (Ø) | Slider Pitch [P] (mm) | Stroke [S] (mm) | |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1 | 17 Days | 50.1 to 100 | 120 ～ 250 | C (w/) | B (w/) | 25 | 20 | 120 ～ 200 | 30 ～ 50 | ||
| 1 | 17 Days | 50.1 to 100 | 120 ～ 250 | C (w/) | B (w/) | 25 | 16 | 120 | 30 ～ 50 | ||
| 1 | 17 Days | 50.1 to 100 | 120 ～ 250 | C (w/) | N (w/o) | 25 | 20 | 120 ～ 200 | 30 ～ 50 | ||
| 1 | 17 Days | 50.1 to 100 | 120 ～ 250 | C (w/) | N (w/o) | 25 | 16 | 120 | 30 ～ 50 | ||
| 1 | 17 Days | 50.1 to 100 | 120 ～ 250 | N (w/o) | B (w/) | 25 | 20 | 120 ～ 200 | 30 ～ 50 | ||
| 1 | 17 Days | 50.1 to 100 | 120 ～ 250 | N (w/o) | B (w/) | 25 | 16 | 120 | 30 ～ 50 | ||
| 1 | 17 Days | 50.1 to 100 | 120 ～ 300 | N (w/o) | N (w/o) | 25 | 20 | 120 ～ 200 | 30 ～ 50 | ||
| 1 | 17 Days | 50.1 to 100 | 120 ～ 250 | N (w/o) | N (w/o) | 25 | 16 | 120 | 30 ～ 50 | ||
| 1 | 17 Days | 100.1 or More | 120 ～ 300 | C (w/) | B (w/) | 32 | 25 | 150 ～ 200 | 30 ～ 50 | ||
| 1 | 17 Days | 100.1 or More | 120 ～ 300 | C (w/) | N (w/o) | 32 | 25 | 150 ～ 200 | 30 ～ 50 | ||
| 1 | 18 Days | 100.1 or More | 120 ～ 300 | N (w/o) | B (w/) | 32 | 25 | 150 ～ 200 | 30 ～ 50 | ||
| 1 | 17 Days | 100.1 or More | 120 ～ 300 | N (w/o) | N (w/o) | 32 | 25 | 150 ～ 200 | 30 ～ 50 | ||
| 1 | 18 Days | 100.1 or More | 120 ～ 300 | C (w/) | B (w/) | 40 | 25 | 150 ～ 200 | 30 ～ 50 | ||
| 1 | 17 Days | 100.1 or More | 120 ～ 300 | C (w/) | N (w/o) | 40 | 25 | 150 ～ 200 | 30 ～ 50 | ||
| 1 | 17 Days | 100.1 or More | 120 ～ 300 | N (w/o) | B (w/) | 40 | 25 | 150 ～ 200 | 30 ～ 50 | ||
| 1 | 18 Days | 100.1 or More | 120 ～ 300 | N (w/o) | N (w/o) | 40 | 25 | 150 ～ 200 | 30 ～ 50 | ||
| 1 | 17 Days | 100.1 or More | 120 ～ 300 | C (w/) | B (w/) | 50 | 25 | 150 ～ 200 | 30 ～ 50 | ||
| 1 | 17 Days | 100.1 or More | 120 ～ 300 | C (w/) | N (w/o) | 50 | 25 | 200 | 30 ～ 50 | ||
| 1 | 17 Days | 100.1 or More | 120 ～ 300 | N (w/o) | B (w/) | 50 | 25 | 200 | 30 ～ 50 | ||
| 1 | 17 Days | 100.1 or More | 120 ～ 300 | N (w/o) | N (w/o) | 50 | 25 | 200 | 30 ～ 50 | ||
| 1 | 17 Days | 100.1 or More | 120 ～ 300 | C (w/) | B (w/) | 63 | 25 | 200 | 30 ～ 50 | ||
| 1 | 17 Days | 100.1 or More | 120 ～ 300 | C (w/) | N (w/o) | 63 | 25 | 200 | 30 ～ 50 | ||
| 1 | 17 Days | 100.1 or More | 120 ～ 300 | N (w/o) | B (w/) | 63 | 25 | 200 | 30 ～ 50 | ||
| 1 | 17 Days | 100.1 or More | 120 ～ 300 | N (w/o) | N (w/o) | 63 | 25 | 200 | 30 ～ 50 |
Loading...
Specifications/Overview
■Velocity, Load Capacity, Force, Allowable Moment
■Allowable Moment| Type | P Slider Pitch | Slider Mass (Including Joint) | Max. Velocity (mm/s) | Allowable Load (kN) | Cylinder Thrust Force Reference Value (kN) | Allowable Static Moment (N⋅m) | |||||||||
| At 0.4 MPa | At 0.5 MPa | At 0.6 MPa | At 0.7 MPa | Ma | Mb | Mc | |||||||||
| Instroke | Outstroke | Instroke | Outstroke | Instroke | Outstroke | Instroke | Outstroke | ||||||||
| MAT25 (S) | 120 | 0.9 | 500 | 0.08 | 0.15 | 0.20 | 0.19 | 0.25 | 0.23 | 0.30 | 0.26 | 0.34 | 3.6 | 3.6 | 5.9 |
| MAT25 | 120 | 0.9 | 4.8 | 4.8 | 6.9 | ||||||||||
| 150 | 1.3 | 4.8 | 4.8 | 8.6 | |||||||||||
| 200 | 1.8 | 4.8 | 4.8 | 11.4 | |||||||||||
| MAT32 | 150 | 1.8 | 0.13 | 0.24 | 0.32 | 0.30 | 0.40 | 0.36 | 0.48 | 0.42 | 0.56 | 7.7 | 7.7 | 9.8 | |
| 200 | 2.6 | 7.7 | 7.7 | 13.1 | |||||||||||
| MAT40 | 150 | 1.8 | 0.22 | 0.42 | 0.50 | 0.53 | 0.63 | 0.63 | 0.75 | 0.74 | 0.88 | 7.7 | 7.7 | 9.8 | |
| 200 | 2.6 | 7.7 | 7.7 | 13.1 | |||||||||||
| MAT50 | 200 | 2.8 | 0.35 | 0.66 | 0.79 | 0.82 | 0.98 | 0.99 | 1.18 | 1.15 | 1.37 | 7.7 | 7.7 | 13.1 | |
| MAT63 | 200 | 2.8 | 0.59 | 1.12 | 1.25 | 1.40 | 1.56 | 1.68 | 1.87 | 1.96 | 2.18 | 7.7 | 7.7 | 13.1 | |
Instroke OutstrokeBasic information
| Feeding Method | Air Pressure | Table Size (Length) L(mm) | 60 | Table Size (Width) W(mm) | 130 |
|---|---|---|---|---|---|
| Table Material | EN AW-6063 Equiv. | Table Surface Treatment | Clear Anodized Aluminum |
Configure
Basic Attributes
-
Load Capacity (Range)(N)
- 50.1 to 100
- 100.1 or More
-
L(mm)
-
Cylinders
- C (w/)
- N (w/o)
-
Base
- B (w/)
- N (w/o)
-
Cylinder Bore Dia.(Ø)
- 25
- 32
- 40
- 50
- 63
-
Linear Shaft Dia.(Ø)
- 16
- 20
- 25
-
Slider Pitch [P](mm)
-
Stroke [S](mm)
-
Type
- MAT
-
Filter by CAD data type
- 2D
- 3D
Filter by standard shipping days
-
- All
- 17 Days or Less
- 18 Days or Less
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Complementary Products
-
Ball Valves / Stainless Steel / PT Female / PF(G) Female
MISUMI Standard Price : 29.47 € Shipping Days: 5 Days
MISUMI Unit еxample related to this product
Tech Support
- Technical Support
- Tel：+49 69 668173-0 / FAX：+49 69 668173-360
- Technical Inquiry
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.