• Brands
  • Company
  • Contact
EN / UK
Type Code Seach | *NOT READY*
#CODE
Keyword suggestions
Part number suggestions
Discontinued Products

Slot Pins for Inspection Jigs / Check Pins with Groove

Slot Pins for Inspection Jigs / Check Pins with Groove

Click on this image to zoom in.

Click on this image to zoom in.

  • Slot Pins for Inspection Jigs / Check Pins with Groove
  • Slot Pins for Inspection Jigs / Check Pins with Groove

MISUMI

MISUMI

[Features] The slotted part of the pin enables visual assessment of the positioning accuracy of a workpiece.

Data sheet

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Detector Shape

Tip Shape

S1: Groove

N: Standard

S3: 3 Slits

D: Stepped

S5: 5 Slits

Slit Part Close-up

[ ! ]

Dimensional Drawing: Related Image
[!] Tip shapes N and D have a centering hole at the tip. The joint of each step may have a relief groove (approx. 1 mm wide and approx. 0.2 mm deep).
[!] When handle length (Z dimension) is 0, pin part has M5 tapped. M4 when P dimension is 8 and handle length is 0.
[!] Handles and pins may be joined with an adhesive. Note that heat or strong force may cause separation.
[ ! ] The handle of this product is not hardened.
[!] Unless otherwise specified, the dimension tolerance conforms to JIS B 0405 Class m. However, chamfer tolerance and tapped depth are excluded.
[M] Material[H] HardnessTypeDetected ShapeTip Shape
EN 1.1191 Equiv.—KJPBS1
S3
S5		N (Standard)
D (Stepped)
45HRC or moreKJPBH

Specification Table

Part Number—P—L—A—G—S—B—Z
       
Type Detected Shape Tip Shape D
KJPB
KJPBH		 S3
S5		 N
D		 16
12		—
—		P12
P10		—
—		L70
L80		—
—		A50
A60		—
—		G1
G0.5
—
S4.0
—
B2		—
—		Z30
Z50
Part NumberPin Dia.Pin Length / Slit WidthTip Part (Tip Shape D, C only)Handle Length
TypeDetected
Shape		Tip
Shape		DP (P < D)
Selection		L
1 mm Increments		A
1 mm Increments		G±0.05S
0.1 mm Increments		B
1 mm Increments		Z
Selection
(For S1)
0.5 mm Increments		(For S3, S5)
Selection
KJPB
KJPBH		S1
S3
S5		N
D		128
10
12
16
20		(When P = 8, 10)
50 to 100
(When P = 12 to 20)
50 to 150		45 to 145
Standard (A ≤ L−5)
Stepped (A ≤ L−B−5)		1 to 4.00.5

1		3.0 to 16.01 to 400
30
50
16
20
25
[ ! ] For Tip Shape D, S ≤ P - 2

Alterations

Part Number—P—L—A—G—S—B—Z— (TM·TN, etc.)
       
Type Detected Shape Tip Shape D
KJPB S5 N 20—P16—L100—A90—G1.0    —Z30— STC
 
AlterationsCodeSpec.
Tapping on Pin End.
Alterations: Related Image		TMAdds a tap on pin end.
Ordering Code TM4 (For M4)
[ ! ] Applicable to Tip Shape N and D only

 

[ ! ] TM is selectable from M4, 5, 6 and 8.

 

[ ! ] Specify the tap size so that 2 mm or more wall thickness remains.

(TM ≤ P - 4 for Tip Shape N, TM ≤ S - 4 for D)
　

 
AlterationsCodeSpec.
Chain
Alterations
Alterations: Related Image
CHLoss-proof chain (length 600 mm) is
attached to the gauge body.
Additional Surface Treatment
(Black Oxide)		STCAdds black oxide surface treatment.

Part Number:  

    3D preview is not available, because the part number has not yet been determined.

  • In order to open the 3D preview, the part number must be fixed.
Loading...

Plug-in is required for 3D Preview

CAD Download

Data to be displayed
30
45
60
  1. 1
Part Number
KJPBHS1D12-P[8,​10]-L[50-100/1]-A[45-95/1]-G[0.5-4/0.5]-S[3-10/0.1]-B[1-40/1]-Z[0,​30,​50]
KJPBHS1D16-P[8,​10,​12]-L[50-150/1]-A[45-145/1]-G[0.5-4/0.5]-S[3-12/0.1]-B[1-40/1]-Z[0,​30,​50]
KJPBHS1D20-P[8,​10,​12,​16]-L[50-150/1]-A[45-145/1]-G[0.5-4/0.5]-S[3-16/0.1]-B[1-40/1]-Z[0,​30,​50]
KJPBHS1D25-P[8,​10,​12,​16,​20]-L[50-150/1]-A[45-145/1]-G[0.5-4/0.5]-S[3-16/0.1]-B[1-40/1]-Z[0,​30,​50]
KJPBHS3D12-P[8,​10]-L[50-100/1]-A[45-95/1]-G[0.5-4/0.5]-S[3-10/0.1]-B[1-40/1]-Z[0,​30,​50]
KJPBHS3D16-P[8,​10,​12]-L[50-150/1]-A[45-145/1]-G[0.5-4/0.5]-S[3-12/0.1]-B[1-40/1]-Z[0,​30,​50]
KJPBHS3D20-P[8,​10,​12,​16]-L[50-150/1]-A[45-145/1]-G[0.5-4/0.5]-S[3-16/0.1]-B[1-40/1]-Z[0,​30,​50]
KJPBHS3D25-P[8,​10,​12,​16,​20]-L[50-150/1]-A[45-145/1]-G[0.5-4/0.5]-S[3-16/0.1]-B[1-40/1]-Z[0,​30,​50]
KJPBHS5D12-P[8,​10]-L[50-100/1]-A[45-95/1]-G[0.5-4/0.5]-S[3-10/0.1]-B[1-40/1]-Z[0,​30,​50]
KJPBHS5D16-P[8,​10,​12]-L[50-150/1]-A[45-145/1]-G[0.5-4/0.5]-S[3-12/0.1]-B[1-40/1]-Z[0,​30,​50]
KJPBHS5D20-P[8,​10,​12,​16]-L[50-150/1]-A[45-145/1]-G[0.5-4/0.5]-S[3-16/0.1]-B[1-40/1]-Z[0,​30,​50]
KJPBHS5D25-P[8,​10,​12,​16,​20]-L[50-150/1]-A[45-145/1]-G[0.5-4/0.5]-S[3-16/0.1]-B[1-40/1]-Z[0,​30,​50]
KJPBS1D12-P[8,​10]-L[50-150/1]-A[45-95/1]-G[0.5-4/0.5]-S[3-10/0.1]-B[1-40/1]-Z[0,​30,​50]
KJPBS1D16-P[8,​10,​12]-L[50-150/1]-A[45-145/1]-G[0.5-4/0.5]-S[3-12/0.1]-B[1-40/1]-Z[0,​30,​50]
KJPBS1D20-P[8,​10,​12,​16]-L[50-150/1]-A[45-145/1]-G[0.5-4/0.5]-S[3-16/0.1]-B[1-40/1]-Z[0,​30,​50]
KJPBS1D25-P[8,​10,​12,​16,​20]-L[50-150/1]-A[45-145/1]-G[0.5-4/0.5]-S[3-16/0.1]-B[1-40/1]-Z[0,​30,​50]
KJPBS1N12-P[8,​10]-L[50-100/1]-A[45-95/1]-G[0.5-4/0.5]-Z[0,​30,​50]
KJPBS1N16-P[8,​10,​12]-L[50-150/1]-A[45-145/1]-G[0.5-4/0.5]-Z[0,​30,​50]
KJPBS1N20-P[8,​10,​12,​16]-L[50-150/1]-A[45-145/1]-G[0.5-4/0.5]-Z[0,​30,​50]
KJPBS1N25-P[8,​10,​12,​16,​20]-L[50-150/1]-A[45-145/1]-G[0.5-4/0.5]-Z[0,​30,​50]
KJPBS3D12-P[8,​10]-L[50-100/1]-A[45-95/1]-G[0.5,​1]-S[3-10/0.1]-B[1-40/1]-Z[0,​30,​50]
KJPBS3D16-P[8,​10,​12]-L[50-150/1]-A[45-145/1]-G[0.5,​1]-S[3-12/0.1]-B[1-40/1]-Z[0,​30,​50]
KJPBS3D20-P[8,​10,​12,​16]-L[50-150/1]-A[45-145/1]-G[0.5,​1]-S[3-16/0.1]-B[1-40/1]-Z[0,​30,​50]
KJPBS3D25-P[8,​10,​12,​16,​20]-L[50-150/1]-A[45-145/1]-G[0.5,​1]-S[3-16/0.1]-B[1-40/1]-Z[0,​30,​50]
KJPBS3N12-P[8,​10]-L[50-100/1]-A[45-95/1]-G[0.5,​1]-Z[0,​30,​50]
KJPBS3N16-P[8,​10,​12]-L[50-150/1]-A[45-145/1]-G[0.5,​1]-Z[0,​30,​50]
KJPBS3N20-P[8,​10,​12,​16]-L[50-150/1]-A[45-145/1]-G[0.5,​1]-Z[0,​30,​50]
KJPBS3N25-P[8,​10,​12,​16,​20]-L[50-150/1]-A[45-145/1]-G[0.5,​1]-Z[0,​30,​50]
KJPBS5D12-P[8,​10]-L[50-100/1]-A[45-95/1]-G[0.5,​1]-S[3-10/0.1]-B[1-40/1]-Z[0,​30,​50]
KJPBS5D16-P[8,​10,​12]-L[50-150/1]-A[45-145/1]-G[0.5,​1]-S[3-12/0.1]-B[1-40/1]-Z[0,​30,​50]
KJPBS5D20-P[8,​10,​12,​16]-L[50-150/1]-A[45-145/1]-G[0.5,​1]-S[3-16/0.1]-B[1-40/1]-Z[0,​30,​50]
KJPBS5D25-P[8,​10,​12,​16,​20]-L[50-150/1]-A[45-145/1]-G[0.5,​1]-S[3-16/0.1]-B[1-40/1]-Z[0,​30,​50]
KJPBS5N12-P[8,​10,​12]-L[50-100/1]-A[45-95/1]-G[0.5,​1]-Z[0,​30,​50]
KJPBS5N16-P[8,​10,​12]-L[50-150/1]-A[45-145/1]-G[0.5,​1]-Z[0,​30,​50]
KJPBS5N20-P[8,​10,​12,​16]-L[50-150/1]-A[45-145/1]-G[0.5,​1]-Z[0,​30,​50]
KJPBS5N25-P[8,​10,​12,​16,​20]-L[50-150/1]-A[45-145/1]-G[0.5,​1]-Z[0,​30,​50]
Part NumberMinimum order quantityVolume Discount
Standard
Shipping Days
?
RoHSHardness Stepped Detector Shape Outer Dia. D
(Ø) 		Handle Length Z
(mm) 		A
(mm) 		B
(mm) 		G
(mm) 		L
(mm) 		P
(mm) 		S
(mm)
1 9 Days 1045HRC～SteppedGrooved120 ～ 5045 ～ 951 ～ 400.5 ～ 450 ～ 1008 ～ 103 ～ 10
1 9 Days 1045HRC～SteppedGrooved160 ～ 5045 ～ 1451 ～ 400.5 ～ 450 ～ 1508 ～ 123 ～ 12
1 9 Days 1045HRC～SteppedGrooved200 ～ 5045 ～ 1451 ～ 400.5 ～ 450 ～ 1508 ～ 163 ～ 16
1 9 Days 1045HRC～SteppedGrooved250 ～ 5045 ～ 1451 ～ 400.5 ～ 450 ～ 1508 ～ 203 ～ 16
1 9 Days 1045HRC～Stepped3 Slits120 ～ 5045 ～ 951 ～ 400.5 ～ 450 ～ 1008 ～ 103 ～ 10
1 9 Days 1045HRC～Stepped3 Slits160 ～ 5045 ～ 1451 ～ 400.5 ～ 450 ～ 1508 ～ 123 ～ 12
1 9 Days 1045HRC～Stepped3 Slits200 ～ 5045 ～ 1451 ～ 400.5 ～ 450 ～ 1508 ～ 163 ～ 16
1 9 Days 1045HRC～Stepped3 Slits250 ～ 5045 ～ 1451 ～ 400.5 ～ 450 ～ 1508 ～ 203 ～ 16
1 9 Days 1045HRC～Stepped5 Slits120 ～ 5045 ～ 951 ～ 400.5 ～ 450 ～ 1008 ～ 103 ～ 10
1 9 Days 1045HRC～Stepped5 Slits160 ～ 5045 ～ 1451 ～ 400.5 ～ 450 ～ 1508 ～ 123 ～ 12
1 9 Days 1045HRC～Stepped5 Slits200 ～ 5045 ～ 1451 ～ 400.5 ～ 450 ～ 1508 ～ 163 ～ 16
1 9 Days 1045HRC～Stepped5 Slits250 ～ 5045 ～ 1451 ～ 400.5 ～ 450 ～ 1508 ～ 203 ～ 16
1 9 Days 10No HardenedSteppedGrooved120 ～ 5045 ～ 951 ～ 400.5 ～ 450 ～ 1508 ～ 103 ～ 10
1 9 Days 10No HardenedSteppedGrooved160 ～ 5045 ～ 1451 ～ 400.5 ～ 450 ～ 1508 ～ 123 ～ 12
1 9 Days 10No HardenedSteppedGrooved200 ～ 5045 ～ 1451 ～ 400.5 ～ 450 ～ 1508 ～ 163 ～ 16
1 9 Days 10No HardenedSteppedGrooved250 ～ 5045 ～ 1451 ～ 400.5 ～ 450 ～ 1508 ～ 203 ～ 16
1 9 Days 10No HardenedStandardGrooved120 ～ 5045 ～ 95-0.5 ～ 450 ～ 1008 ～ 10-
1 9 Days 10No HardenedStandardGrooved160 ～ 5045 ～ 145-0.5 ～ 450 ～ 1508 ～ 12-
1 9 Days 10No HardenedStandardGrooved200 ～ 5045 ～ 145-0.5 ～ 450 ～ 1508 ～ 16-
1 9 Days 10No HardenedStandardGrooved250 ～ 5045 ～ 145-0.5 ～ 450 ～ 1508 ～ 20-
1 9 Days 10No HardenedStepped3 Slits120 ～ 5045 ～ 951 ～ 400.5 ～ 150 ～ 1008 ～ 103 ～ 10
1 9 Days 10No HardenedStepped3 Slits160 ～ 5045 ～ 1451 ～ 400.5 ～ 150 ～ 1508 ～ 123 ～ 12
1 9 Days 10No HardenedStepped3 Slits200 ～ 5045 ～ 1451 ～ 400.5 ～ 150 ～ 1508 ～ 163 ～ 16
1 9 Days 10No HardenedStepped3 Slits250 ～ 5045 ～ 1451 ～ 400.5 ～ 150 ～ 1508 ～ 203 ～ 16
1 9 Days 10No HardenedStandard3 Slits120 ～ 5045 ～ 95-0.5 ～ 150 ～ 1008 ～ 10-
1 9 Days 10No HardenedStandard3 Slits160 ～ 5045 ～ 145-0.5 ～ 150 ～ 1508 ～ 12-
1 9 Days 10No HardenedStandard3 Slits200 ～ 5045 ～ 145-0.5 ～ 150 ～ 1508 ～ 16-
1 9 Days 10No HardenedStandard3 Slits250 ～ 5045 ～ 145-0.5 ～ 150 ～ 1508 ～ 20-
1 9 Days 10No HardenedStepped5 Slits120 ～ 5045 ～ 951 ～ 400.5 ～ 150 ～ 1008 ～ 103 ～ 10
1 9 Days 10No HardenedStepped5 Slits160 ～ 5045 ～ 1451 ～ 400.5 ～ 150 ～ 1508 ～ 123 ～ 12
1 9 Days 10No HardenedStepped5 Slits200 ～ 5045 ～ 1451 ～ 400.5 ～ 150 ～ 1508 ～ 163 ～ 16
1 9 Days 10No HardenedStepped5 Slits250 ～ 5045 ～ 1451 ～ 400.5 ～ 150 ～ 1508 ～ 203 ～ 16
1 9 Days 10No HardenedStandard5 Slits120 ～ 5045 ～ 95-0.5 ～ 150 ～ 1008 ～ 12-
1 9 Days 10No HardenedStandard5 Slits160 ～ 5045 ～ 145-0.5 ～ 150 ～ 1508 ～ 12-
1 9 Days 10No HardenedStandard5 Slits200 ～ 5045 ～ 145-0.5 ～ 150 ～ 1508 ～ 16-
1 9 Days 10No HardenedStandard5 Slits250 ～ 5045 ～ 145-0.5 ～ 150 ～ 1508 ～ 20-

Loading...

  1. 1

App. Example

 

Basic information

Type Grooved Pins Shape Straight Tip Shape Circular Shape
Tip Type Straight Shape of Stepped Section Circular Shape Material EN 1.1191 Equiv.

Configure

Clear all

36Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.
The part number is completed.

Basic Attributes

  • Hardness

    • 45HRC～
    • No Hardened

    Clear

  • Stepped

    • Standard
    • Stepped

    Clear

  • Detector Shape

    • 3 Slits
    • 5 Slits
    • Grooved

    Clear

  • Outer Dia. D(Ø)

    • 12
    • 16
    • 20
    • 25

    Clear

  • Handle Length Z(mm)

    • 0
    • 30
    • 50

    Clear

  • A(mm)

     [45-145/1mm Unit(s)]

    Clear

  • B(mm)

     [1-40/1mm Unit(s)]

    Clear

  • G(mm)

    • 0.5
    • 1

     [0.5-4/0.5mm Unit(s)]

    Clear

  • L(mm)

     [50-150/1mm Unit(s)]

    Clear

  • P(mm)

    • 8
    • 10
    • 12
    • 16
    • 20

    Clear

  • S(mm)

     [3-16/0.1mm Unit(s)]

    Clear

  • Type

    • KJPB
    • KJPBH

    Clear

  • Filter by CAD data type

    • 2D
    • 3D

    Clear

Filter by standard shipping days

    • All
    • 9 Days or Less

    Reset

Optional Attributes

Complementary Products

Tech Support

Technical Support
Tel：+49 69 668173-0 / FAX：+49 69 668173-360
Technical Inquiry

Payment Method

  • Payment on account
  • Pre Payment
  • PayPal

On-Demand Manufacturing

Change View

Certificates

  • ISO-9001
  • ISO-14001
  • AEO Certification
  • RoHS
  • REACH

MISUMI worldwide

Social Media

Legal notice

Copyright © MISUMI Corporation All Rights Reserved.