• Brands
  • Company
  • Contact
EN / UK
Type Code Seach | *NOT READY*
#CODE
Keyword suggestions
Part number suggestions
Discontinued Products

Slot Pins for Inspection Components / Stepped / Straight

Slot Pins for Inspection Components / Stepped / Straight

Click on this image to zoom in.

Click on this image to zoom in.

  • Slot Pins for Inspection Components / Stepped / Straight
  • Slot Pins for Inspection Components / Stepped / Straight

MISUMI

MISUMI

Data sheet

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Small Head: D = 8 to 25

Large Head: D = 10 L to 20 L" ! "2

[ ! ]3

Slot Pins for Inspection Components - Stepped Straight, Handle Length Selectable Type: Related Image
[ ! ] 1. For electroless nickel plating, please specify the alteration MN.
[ ! ] 2. Dimensions not specified are the same as those of Small Head Type.
[ ! ] 3. When S ≤ 3, C is 0.5.
[!] The joint of each step may have a relief groove (approx. 1 mm wide and approx. 0.2 mm deep).
[!] Handles and pins may be joined with an adhesive. Note that heat or strong force may cause separation.
[!] This product is hardened for the entire part.
[!] Unless otherwise specified, the dimension tolerance conforms to JIS B 0405 Class m. However, chamfer tolerance and tapped depth are excluded.
[M]Material [!] 1[H] HardnessTYPE
S 0
−0.02		Sg6
EN 1.1191 Equiv.-KJPDZKJPGDZ
EN 1.1191 Equiv.45HRC or moreKJPDHZKJPGDHZ

Specification Table

Part Number (TYPE·D)—P—S—L—B—Z
KJPGDZ16L—P20.25—S16.00—L25—B20—Z30
Sg6
2.00 or more 3.00−0.002
−0.008
3.01 or more 6.00−0.004−0.012
6.01 to 10.00−0.005−0.014
10.01 to 18.00−0.006−0.017
18.01 to 30.00−0.007−0.020
Part Number0.01 mm Increments1 mm IncrementsZM
(Coarse)
TypeDPS (P > S)LB
(S 0
−0.02)		(Sg6)Selection
(EN 1.1191 Equiv.)
KJPDZ

(EN 1.1191 Equiv. (hardened))
KJPDHZ		(EN 1.1191 Equiv.)
KJPGDZ

(EN 1.1191 Equiv. (hardened))
KJPGDHZ		 8 2.50 to 6.00 2.00 to 5.505 to 25

When P ≤ 3.99
L ≤ P × 4		5 to 25

When S ≤ 2.99
B ≤ S × 4		[ ! ]
10
20
30
40		M4
10 2.50 to 8.00 2.00 to 7.50M5
12 2.50 to 10.00 2.00 to 9.50M5
16 3.50 to 14.00 3.00 to 13.50M5
2010.00 to 18.00 5.00 to 17.00M5
2515.00 to 23.00 8.00 to 22.00M5
10 L10.00 to 16.00 5.00 to 15.0030
40		M5
12 L12.00 to 20.00 6.00 to 19.00M5
16 L16.00 to 25.00 8.00 to 24.00(L+B ≤ 50)M5
20 L20.00 to 30.0010.00 to 29.00M5
[ ! ] Tapped holes are not provided on products with Z = 10.
[ ! ] Z dimension 10 and 20 are available only when P ≥ 5 and pin length (L + B) ≤ 30 only.
 

Alterations

Part Number—P—S—L—B—Z—(CH·KH·KF, etc.)
KJPGDZ16—P8.00—S6.00—L25—B20—Z30—NMN
AlterationsCodeSpec.

Chain
Alterations

CHLoss-proof chain (length 600 mm) is attached to gauge body.
Additional Surface Treatment
(Electroless Nickel Plating)		MNElectroless nickel plating is applied.
[ NG ] Combination with STC is not available.
Additional Surface Treatment
(Black Oxide)		STCAdds black oxide surface treatment.
[ NG ] Combination with MN is not available.
P Dimension Tolerance
PKCChanges P dimension tolerance to g6.
Engraving of P Dimension
KHMachines flats on knurled head and engraves P dimension (with the character orientation arbitrary).
[ NG ] Not applicable to handle length 10
[ ! ] Engraved on the reverse side when combined with KF and KHS.
Engraving of the Specified CharactersKFEngraves alphabet or number.
Ordering Code KF-MISUMI0034
Printable Character: Alphabet, Number 
. (period)
[ NG ] Not applicable to handle length 10

[ ! ] No symbols, such as a hyphen (-), other than those mentioned above may be used for engraving.
No symbols, such as a hyphen (-), other than those mentioned above may be used for engraving.

[ ! ] The pin's orientation toward the engraved characters
is arbitrary.

[ ! ] Engraved on the reverse side
when combined with KH and KHS.

[ ! ] Up to 8 digits max.

[ ! ] When combining with other options, enter this last.

Z (Handle)Max. Characters
Small HeadLarge Head
205—
30105
401210
50
AlterationsCodeSpec.
L Dimension Tolerance
LKCChanges L dimension tolerance to ±0.05.
Ordering Code LKC

[ ! ] When LKC is used, L dimension can be configured in 0.1 mm increments

[ ! ]P > 4
No Relief Groove
NMNOmits the relief groove between knurled part and straight part on the step.
[ NG ] Not applicable to Large Head Type
Tapered Tip
STTTapers the tip.
[ ! ] Applicable when L ≥ 10 and B ≥ 10.
[ ! ] The length of m is included in that of B.
Sm
2.00 to 3.001
3.01 to 6.002
6.01 to 10.003
10.01 to 20.004
20.01 to 30.00
Engraving of S Dimension
KHSMachines flats on knurled head
and engraves S dimension.
[ NG ] Not applicable to handle length 10

[ ! ] Engraved on the reverse side when KH and KF are combined.

Caution when making alterations to engraving (KH, KF, KHS)

[ ! ]If the pin and the knurled part are joined with an adhesive,
10 mm of the tip is not machined flat because the tip is thin.

 

KF Alteration (Engraving of Specified Characters) Precautions

(1) Please enter the characters you want after "KF-".
(2) Printable characters are alphabets, numbers, and periods (.).
(3) Numbers can be up to 8 characters.
(4) When combining with other alterations, enter KF last.
(5) You cannot use more than 1 period (.).
[Example]
　OK: KJPGSH16-P9.34-L30-STT-KH-KF-246625.5020
　NG: KJPGSH16-P9.34-L30-STT-KH-KF-246625..5020
　NG: KJPGSH16-P9.34-L30-STT-KH-KF-246.625.5020

Part Number:  

    3D preview is not available, because the part number has not yet been determined.

  • In order to open the 3D preview, the part number must be fixed.
Loading...

Plug-in is required for 3D Preview

CAD Download

Data to be displayed
30
45
60
  1. 1
Part Number
KJPDHZ8-P[2-6/0.01]-S[2-5.5/0.01]-L[5-25/1]-B[5-25/1]-Z[10,​20,​30,​40]
KJPDHZ10-P[2-8/0.01]-S[2-7.5/0.01]-L[5-25/1]-B[5-25/1]-Z[10,​20,​30,​40]
KJPDHZ10-P[2-8/0.01]-S[2-7.5/0.01]-S[2-7.5/0.01]-B[5-25/1]-Z[10,​20,​30,​40]
KJPDHZ10L-P[10-16/0.01]-S[5-15/0.01]-L[5-25/1]-B[5-25/1]-Z[30,​40]
KJPDHZ12-P[2-10/0.01]-S[2-9.5/0.01]-L[5-25/1]-B[5-25/1]-Z[10,​20,​30,​40]
KJPDHZ12L-P[12-20/0.01]-S[6-19/0.01]-L[5-25/1]-B[5-25/1]-Z[30,​40]
KJPDHZ16-P[3.5-14/0.01]-S[3-13.5/0.01]-L[5-25/1]-B[5-25/1]-Z[10,​20,​30,​40]
KJPDHZ16L-P[16-25/0.01]-S[8-24/0.01]-L[5-25/1]-B[5-25/1]-Z[30,​40]
KJPDHZ20-P[10-18/0.01]-S[5-17/0.01]-L[5-25/1]-B[5-25/1]-Z[10,​20,​30,​40]
KJPDHZ20L-P[20-30/0.01]-S[10-29/0.01]-L[5-25/1]-B[5-25/1]-Z[30,​40]
KJPDHZ25-P[15-23/0.01]-S[8-22/0.01]-L[5-25/1]-B[5-25/1]-Z[10,​20,​30,​40]
KJPDZ8-P[2-6/0.01]-S[2-5.5/0.01]-L[5-40/1]-B[5-25/1]-Z[10,​20,​30,​40]
KJPDZ10-P[2-8/0.01]-S[2-7.5/0.01]-L[5-25/1]-B[5-25/1]-Z[10,​20,​30,​40]
KJPDZ10L-P[10-16/0.01]-S[5-15/0.01]-L[5-25/1]-B[5-25/1]-Z[30,​40]
KJPDZ12-P[2.5-10/0.01]-S[2-9.5/0.01]-L[5-25/1]-B[5-25/1]-Z[10,​20,​30,​40]
KJPDZ12L-P[12-20/0.01]-S[6-19/0.01]-L[5-25/1]-B[5-25/1]-Z[30,​40]
KJPDZ16-P[3.5-14/0.01]-S[3-13.5/0.01]-L[5-25/1]-B[5-25/1]-Z[10,​20,​30,​40]
KJPDZ16L-P[16-25/0.01]-S[8-24/0.01]-L[5-25/1]-B[5-25/1]-Z[30,​40]
KJPDZ20-P[10-18/0.01]-S[5-17/0.01]-L[5-25/1]-B[5-25/1]-Z[10,​20,​30,​40]
KJPDZ20L-P[20-30/0.01]-S[10-29/0.01]-L[5-25/1]-B[5-25/1]-Z[30,​40]
KJPDZ25-P[15-23/0.01]-S[8-22/0.01]-L[5-25/1]-B[5-25/1]-Z[10,​20,​30,​40]
KJPGDHZ8-P[2.5-6/0.01]-S[2-5.5/0.01]-L[5-25/1]-B[5-25/1]-Z[20,​30,​40]
KJPGDHZ10-P[2.5-8/0.01]-S[2-7.5/0.01]-L[5-25/1]-B[5-25/1]-Z[10,​20,​30,​40]
KJPGDHZ10L-P[10-16/0.01]-S[5-15/0.01]-L[5-25/1]-B[5-25/1]-Z[30,​40]
KJPGDHZ12-P[2.5-10/0.01]-S[2-9.5/0.01]-L[5-25/1]-B[5-25/1]-Z[10,​20,​30,​40]
KJPGDHZ12L-P[12-20/0.01]-S[6-19/0.01]-L[5-25/1]-B[5-25/1]-Z[30,​40]
KJPGDHZ16-P[3-14/0.01]-S[3-13.5/0.01]-L[5-25/1]-B[5-25/1]-Z[10,​20,​30,​40]
KJPGDHZ16L-P[16-25/0.01]-S[8-24/0.01]-L[5-25/1]-B[5-25/1]-Z[30,​40]
KJPGDHZ20-P[10-18/0.01]-S[5-17/0.01]-L[5-25/1]-B[5-25/1]-Z[10,​20,​30,​40]
KJPGDHZ20L-P[20-30/0.01]-S[10-29/0.01]-L[5-25/1]-B[5-25/1]-Z[30,​40]
KJPGDHZ25-P[15-23/0.01]-S[8-22/0.01]-L[5-25/1]-B[5-25/1]-Z[10,​20,​30,​40]
KJPGDZ8-P[2.5-6/0.01]-S[2-5.5/0.01]-L[5-25/1]-B[5-25/1]-Z[10,​20,​30,​40]
KJPGDZ10-P[2-8/0.01]-S[2-7.5/0.01]-L[5-25/1]-B[5-25/1]-Z[10,​20,​30,​40]
KJPGDZ10L-P[10-16/0.01]-S[5-15/0.01]-L[5-25/1]-B[5-25/1]-Z[30,​40]
KJPGDZ12-P[2-10/0.01]-S[2-9.5/0.01]-L[5-25/1]-B[5-25/1]-Z[10,​20,​30,​40]
KJPGDZ12L-P[12-20/0.01]-S[6-19/0.01]-L[5-25/1]-B[5-25/1]-Z[30,​40]
KJPGDZ16-P[3.5-14/0.01]-S[3-13.5/0.01]-L[5-25/1]-B[5-25/1]-Z[10,​20,​30,​40]
KJPGDZ16L-P[16-25/0.01]-S[8-24/0.01]-L[5-25/1]-B[5-25/1]-Z[30,​40]
KJPGDZ20-P[10-18/0.01]-S[5-17/0.01]-L[5-25/1]-B[5-25/1]-Z[10,​20,​30,​40]
KJPGDZ20L-P[20-30/0.01]-S[10-29/0.01]-L[5-25/1]-B[5-25/1]-Z[30,​40]
KJPGDZ25-P[15-23/0.01]-S[8-22/0.01]-L[5-25/1]-B[5-25/1]-Z[10,​20,​30,​40]
Part NumberMinimum order quantityVolume Discount
Standard
Shipping Days
?
RoHSHardness Large Head/Small Head Insertion Part S Dimension Tolerance Outer Dia. D
(Ø) 		B
(mm) 		L
(mm) 		P
(mm) 		S
(mm) 		Z
1 9 Days 1045HRC ~Small Head0/-0.0285 ～ 255 ～ 252 ～ 62 ～ 5.510 ～ 40
1 9 Days 1045HRC ~Small Head0/-0.02105 ～ 255 ～ 252 ～ 82 ～ 7.510 ～ 40
1 9 Days 1045HRC ~Small Head0/-0.02105 ～ 25-2 ～ 82 ～ 7.510 ～ 40
1 9 Days 1045HRC ~Large Head0/-0.02105 ～ 255 ～ 2510 ～ 165 ～ 1530 ～ 40
1 9 Days 1045HRC ~Small Head0/-0.02125 ～ 255 ～ 252 ～ 102 ～ 9.510 ～ 40
1 9 Days 1045HRC ~Large Head0/-0.02125 ～ 255 ～ 2512 ～ 206 ～ 1930 ～ 40
1 9 Days 1045HRC ~Small Head0/-0.02165 ～ 255 ～ 253.5 ～ 143 ～ 13.510 ～ 40
1 9 Days 1045HRC ~Large Head0/-0.02165 ～ 255 ～ 2516 ～ 258 ～ 2430 ～ 40
1 9 Days 1045HRC ~Small Head0/-0.02205 ～ 255 ～ 2510 ～ 185 ～ 1710 ～ 40
1 9 Days 1045HRC ~Large Head0/-0.02205 ～ 255 ～ 2520 ～ 3010 ～ 2930 ～ 40
1 9 Days 1045HRC ~Small Head0/-0.02255 ～ 255 ～ 2515 ～ 238 ～ 2210 ～ 40
1 9 Days 10No HardenedSmall Head0/-0.0285 ～ 255 ～ 402 ～ 62 ～ 5.510 ～ 40
1 9 Days 10No HardenedSmall Head0/-0.02105 ～ 255 ～ 252 ～ 82 ～ 7.510 ～ 40
1 9 Days 10No HardenedLarge Head0/-0.02105 ～ 255 ～ 2510 ～ 165 ～ 1530 ～ 40
1 9 Days 10No HardenedSmall Head0/-0.02125 ～ 255 ～ 252.5 ～ 102 ～ 9.510 ～ 40
1 9 Days 10No HardenedLarge Head0/-0.02125 ～ 255 ～ 2512 ～ 206 ～ 1930 ～ 40
1 9 Days 10No HardenedSmall Head0/-0.02165 ～ 255 ～ 253.5 ～ 143 ～ 13.510 ～ 40
1 9 Days 10No HardenedLarge Head0/-0.02165 ～ 255 ～ 2516 ～ 258 ～ 2430 ～ 40
1 9 Days 10No HardenedSmall Head0/-0.02205 ～ 255 ～ 2510 ～ 185 ～ 1710 ～ 40
1 9 Days 10No HardenedLarge Head0/-0.02205 ～ 255 ～ 2520 ～ 3010 ～ 2930 ～ 40
1 9 Days 10No HardenedSmall Head0/-0.02255 ～ 255 ～ 2515 ～ 238 ～ 2210 ～ 40
1 9 Days 1045HRC ~Small Headg685 ～ 255 ～ 252.5 ～ 62 ～ 5.520 ～ 40
1 9 Days 1045HRC ~Small Headg6105 ～ 255 ～ 252.5 ～ 82 ～ 7.510 ～ 40
1 9 Days 1045HRC ~Large Headg6105 ～ 255 ～ 2510 ～ 165 ～ 1530 ～ 40
1 9 Days 1045HRC ~Small Headg6125 ～ 255 ～ 252.5 ～ 102 ～ 9.510 ～ 40
1 9 Days 1045HRC ~Large Headg6125 ～ 255 ～ 2512 ～ 206 ～ 1930 ～ 40
1 9 Days 1045HRC ~Small Headg6165 ～ 255 ～ 253 ～ 143 ～ 13.510 ～ 40
1 9 Days 1045HRC ~Large Headg6165 ～ 255 ～ 2516 ～ 258 ～ 2430 ～ 40
1 9 Days 1045HRC ~Small Headg6205 ～ 255 ～ 2510 ～ 185 ～ 1710 ～ 40
1 9 Days 1045HRC ~Large Headg6205 ～ 255 ～ 2520 ～ 3010 ～ 2930 ～ 40
1 9 Days 1045HRC ~Small Headg6255 ～ 255 ～ 2515 ～ 238 ～ 2210 ～ 40
1 9 Days 10No HardenedSmall Headg685 ～ 255 ～ 252.5 ～ 62 ～ 5.510 ～ 40
1 9 Days 10No HardenedSmall Headg6105 ～ 255 ～ 252 ～ 82 ～ 7.510 ～ 40
1 9 Days 10No HardenedLarge Headg6105 ～ 255 ～ 2510 ～ 165 ～ 1530 ～ 40
1 9 Days 10No HardenedSmall Headg6125 ～ 255 ～ 252 ～ 102 ～ 9.510 ～ 40
1 9 Days 10No HardenedLarge Headg6125 ～ 255 ～ 2512 ～ 206 ～ 1930 ～ 40
1 9 Days 10No HardenedSmall Headg6165 ～ 255 ～ 253.5 ～ 143 ～ 13.510 ～ 40
1 9 Days 10No HardenedLarge Headg6165 ～ 255 ～ 2516 ～ 258 ～ 2430 ～ 40
1 9 Days 10No HardenedSmall Headg6205 ～ 255 ～ 2510 ～ 185 ～ 1710 ～ 40
1 9 Days 10No HardenedLarge Headg6205 ～ 255 ～ 2520 ～ 3010 ～ 2930 ～ 40
1 9 Days 10No HardenedSmall Headg6255 ～ 255 ～ 2515 ～ 238 ～ 2210 ～ 40

Loading...

  1. 1
 

Basic information

Type Slot Pin Shape Stepped Tip Shape Circular Shape
Tip Type Straight Shape of Stepped Section Circular Shape Material EN 1.1191 Equiv.
Handle Length Selection Selection

Configure

Clear all

41Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.
The part number is completed.

Basic Attributes

  • Hardness

    • 45HRC ~
    • No Hardened

    Clear

  • Large Head/Small Head

    • Large Head
    • Small Head

    Clear

  • Insertion Part S Dimension Tolerance

    • 0/-0.02
    • g6

    Clear

  • Outer Dia. D(Ø)

    • 8
    • 10
    • 12
    • 16
    • 20
    • 25

    Clear

  • B(mm)

     [5-25/1mm Unit(s)]

    Clear

  • L(mm)

     [5-40/1mm Unit(s)]

    Clear

  • P(mm)

     [2-30/0.01mm Unit(s)]

    Clear

  • S(mm)

     [2-29/0.01mm Unit(s)]

    Clear

  • Z

    • 10
    • 20
    • 30
    • 40

    Clear

  • Type

    • KJPDHZ
    • KJPDZ
    • KJPGDHZ
    • KJPGDZ

    Clear

  • Filter by CAD data type

    • 2D
    • 3D

    Clear

Filter by standard shipping days

    • All
    • 9 Days or Less

    Reset

Optional Attributes

Complementary Products

Tech Support

Technical Support
Tel：+49 69 668173-0 / FAX：+49 69 668173-360
Technical Inquiry

Payment Method

  • Payment on account
  • Pre Payment
  • PayPal

On-Demand Manufacturing

Change View

Certificates

  • ISO-9001
  • ISO-14001
  • AEO Certification
  • RoHS
  • REACH

MISUMI worldwide

Social Media

Legal notice

Copyright © MISUMI Corporation All Rights Reserved.