• Brands
  • Company
  • Contact
EN / UK
Type Code Seach | *NOT READY*
#CODE
Keyword suggestions
Part number suggestions
Discontinued Products

Slot Pins for Inspection Jigs / Straight Threaded with Step / 2 Steps

Slot Pins for Inspection Jigs / Straight Threaded with Step / 2 Steps

MISUMI

MISUMI

Data sheet

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

[ ! ]2

[ ! ]3

[ ! ]5

[ ! ]3

[ ! ]5

Slot Pins for Inspection Components - Straight Threaded With Step, 2-Step Type: Related Image

Small Head: D = 8 to 25

Large Head: D = 10 L to 20 L" ! "4

[ ! ] 1. For electroless nickel plating, please specify the alteration MN.
[ ! ] 2. When D = 8, the screws of handle change from M5 to M4.
[ ! ] 3. For shorter handle length, specify the alteration ZC.
[ ! ] 4. Dimensions not specified are the same as those of Small Head Type.
[!] 5. There is a relief groove that is approx. 1 mm wide (approx. 0.2 mm deep). To eliminate relief groove, specify the alteration NMN.
[ ! ] Large Head Type (D = 10 L to 20 L) is available for EN 1.1191 Equiv. only.
[!] This product is hardened for the entire part.
[ ! ] Unless otherwise specified, the dimension tolerance conforms to JIS B 0405 Class m. However, tapped depth is excluded.
[M]Material [!] 1[H] HardnessTYPE
S 0
−0.02		Sg6
EN 1.1191 Equiv.-KJPMDKJPGMD
EN 1.1191 Equiv.45HRC or moreKJPMDHKJPGMDH
EN 1.4301 Equiv.-KJPMDSKJPGMDS

Specification Table

Part Number (TYPE·D)—P—S—M—L—B—C
KJPMD12L—P18.50—S13.5—M8—L10—B10—C10
Part Number0.01 mm Increments0.1 mm IncrementsM (S ≥ M)
Selection		1 mm Increments
TypeDPS (P ≥ S)LBC
(S 0
−0.02)		(Sg6)
(EN 1.1191 Equiv.)
KJPMD

(EN 1.1191 Equiv. (hardened))
KJPMDH

(EN 1.4301 Equiv.)
KJPMDS		(EN 1.1191 Equiv.)
KJPGMD

(EN 1.1191 Equiv. (hardened))
KJPGMDH

(EN 1.4301 Equiv.)
KJPGMDS		8 4.00 to 6.00 3.0 to 5.034      2 to 20
(L ≤ P × 3)

When P ≤ 10
(L ≤ P × 2)		2 to 20
(B ≤ S × 3)

When S ≤ 9
(B ≤ S × 2)		5 to 20
(M ≤ C ≤ M × 3)

When M ≤ 5
(M ≤ C ≤ M × 2)
10 5.00 to 8.00 4.0 to 7.0 456    
12 5.00 to 10.00 4.0 to 9.0 4568   
16 8.00 to 14.00 7.0 to 13.0 456810S1012
2010.00 to 18.00 9.0 to 17.0  56810S1012
2515.00 to 23.0014.0 to 22.0  56810S1012
10 L10.00 to 16.00 5.0 to 15.0 456810S10 
12 L12.00 to 20.00 6.0 to 19.0  56810S1012
16 L16.00 to 25.00 8.0 to 24.0   6810S1012
20 L20.00 to 30.0010.0 to 29.0   6810S1012
[!] S10 is fine thread (pitch 1.25). Others are coarse.

Alterations

Part Number—P—S—M—L—B—C—(CH·KH·KF, etc.)
KJPMDS10—P7.00—S4—M4—L10—B24—C8—MN
AlterationsCodeSpec.
Chain{{{attr29}}}CHLoss-proof chain (length 600 mm) is attached to gauge body.
Handle Length
Slot Pins for Inspection Components - Straight Threaded With Step, 2-Step Type: Related Image		ZCChanges handle length 50 to 10, 20, 30 or 40.
Ordering Code ZC20

[ ! ] Handle length 10 and 20 are available only when P ≥ 5 and pin length L + B (+ C) ≤ 30.

[ ! ] For Large Head Type, only ZC30 and 40 are applicable

[ NG ] For handle length 10, there is no tapped hole.

[ NG ] For handle length 10, combination with KH is not available.
Engraving of P Dimension
Slot Pins for Inspection Components - Straight Threaded With Step, 2-Step Type: Related Image		KHMachines flats on knurled head and engraves P dimension (with the character orientation arbitrary).
[ NG ] Not applicable to handle length 10
[ ! ] Engraved on the reverse side when combined with KF
Engraving of the Specified Characters
Slot Pins for Inspection Components - Straight Threaded With Step, 2-Step Type: Related Image		KFEngraves alphabet or number.
Ordering Code KF-MISUMI0034
Printable Character: alphabet, number, . (period)

[ NG ] Not applicable to handle length 10

[ ! ] No symbols, such as a hyphen (-), other than those mentioned above may be used for engraving.

[ ! ] The pin's orientation toward the engraved characters is arbitrary.

[ ! ] Engraved on the reverse side when combined with KH.

[ ! ] Up to 8 digits max.

Z (Handle)Max. Characters
Small HeadLarge Head
205-
30105
401210
50
AlterationsCodeSpec.
L Dimension Tolerance
Slot Pins for Inspection Components - Straight Threaded With Step, 2-Step Type: Related Image		LKCChanges L dimension tolerance to ±0.05.
Ordering Code LKC
[ ! ] When the LKC is used, L Dimension can be configured in 0.1 mm increments
[ ! ]L ≤ 30 [ ! ]P ≥ 4
No Relief Groove
Slot Pins for Inspection Components - Straight Threaded With Step, 2-Step Type: Related Image		NMNOmits the relief groove between knurled part and straight part on the step.
[ NG ] Not applicable to Large Head Type
Additional Surface Treatment
(Electroless Nickel Plating)		MNElectroless nickel plating is applied.
[ ! ] Applicable to Material EN 1.1191 Equiv. only
[ NG ] Combination with STC is not available.
Additional Surface Treatment
(Black Oxide)		STCAdds black oxide surface treatment.
[ ! ] Applicable to Material EN 1.1191 Equiv. only
[ NG ]Combination with MN is not available.

KF Alteration (Engraving of Specified Characters) Precautions

(1) Please enter the characters you want after "KF-".
(2) Printable characters are alphabets, numbers, and periods (.).
(3) Numbers can be up to 8 characters.
(4) When combining with other alterations, enter KF last.
(5) You cannot use more than 1 period (.).
[Example]
　OK: KJPGSH16-P9.34-L30-STT-KH-KF-246625.5020
　NG: KJPGSH16-P9.34-L30-STT-KH-KF-246625..5020
　NG: KJPGSH16-P9.34-L30-STT-KH-KF-246.625.5020

Part Number:  

    3D preview is not available, because the part number has not yet been determined.

  • In order to open the 3D preview, the part number must be fixed.
Loading...

Plug-in is required for 3D Preview

CAD Download

Data to be displayed
30
45
60
  1. 1
  2. 2
  3. Next >>
Part Number
KJPGMD8-P[4-6/0.01]-S[3-5/0.1]-M[3,​4]-L[2-20/1]-B[1-20/1]-C[5-8/1]
KJPGMD10-P[5-8/0.01]-S[4-7/0.1]-M[4,​5,​6]-L[2-20/1]-B[1-20/1]-C[5-18/1]
KJPGMD10L-P[10-16/0.01]-S[5-15/0.1]-M[4,​5,​6,​8,​10]-L[2-20/1]-B[1-20/1]-C[5-20/1]
KJPGMD10L-P[10-16/0.01]-S[5-15/0.1]-MS10-L[2-20/1]-B[1-20/1]-C[5-20/1]
KJPGMD12-P[5-10/0.01]-S[4-9/0.1]-M[4,​5,​6,​8]-L[2-20/1]-B[1-20/1]-C[5-20/1]
KJPGMD12L-P[12-20/0.01]-S[6-19/0.1]-M[5,​6,​8,​10,​12]-L[2-20/1]-B[1-20/1]-C[5-20/1]
KJPGMD12L-P[12-20/0.01]-S[6-19/0.1]-MS10-L[2-20/1]-B[1-20/1]-C[5-20/1]
KJPGMD16-P[8-14/0.01]-S[7-13/0.1]-M[4,​5,​6,​8,​10,​12]-L[2-20/1]-B[1-20/1]-C[5-20/1]
KJPGMD16-P[8-14/0.01]-S[7-13/0.1]-MS10-L[2-20/1]-B[1-20/1]-C[5-20/1]
KJPGMD16L-P[16-25/0.01]-S[8-24/0.1]-M[6,​8,​10,​12]-L[2-20/1]-B[1-20/1]-C[5-20/1]
KJPGMD16L-P[16-25/0.01]-S[8-24/0.1]-MS10-L[2-20/1]-B[1-20/1]-C[5-20/1]
KJPGMD20-P[10-18/0.01]-S[9-17/0.1]-M[5,​6,​8,​10,​12]-L[2-20/1]-B[1-20/1]-C[5-20/1]
KJPGMD20-P[10-18/0.01]-S[9-17/0.1]-MS10-L[2-20/1]-B[1-20/1]-C[5-20/1]
KJPGMD20L-P[20-30/0.01]-S[10-29/0.1]-M[6,​8,​10,​12]-L[2-20/1]-B[1-20/1]-C[5-20/1]
KJPGMD20L-P[20-30/0.01]-S[10-29/0.1]-MS10-L[2-20/1]-B[1-20/1]-C[5-20/1]
KJPGMD25-P[15-23/0.01]-S[14-22/0.1]-M[5,​6,​8,​10,​12]-L[2-20/1]-B[1-20/1]-C[5-20/1]
KJPGMD25-P[15-23/0.01]-S[14-22/0.1]-MS10-L[2-20/1]-B[1-20/1]-C[5-20/1]
KJPGMDH8-P[4-6/0.01]-S[3-5/0.1]-M[3,​4]-L[2-20/1]-B[1-20/1]-C[5-8/1]
KJPGMDH10-P[5-8/0.01]-S[4-7/0.1]-M[4,​5,​6]-L[2-20/1]-B[1-20/1]-C[5-18/1]
KJPGMDH10L-P[10-16/0.01]-S[5-15/0.1]-M[4,​5,​6,​8,​10]-L[2-20/1]-B[1-20/1]-C[5-20/1]
KJPGMDH10L-P[10-16/0.01]-S[5-15/0.1]-MS10-L[2-20/1]-B[1-20/1]-C[5-20/1]
KJPGMDH12-P[5-10/0.01]-S[4-9/0.1]-M[4,​5,​6,​8]-L[2-20/1]-B[1-20/1]-C[5-20/1]
KJPGMDH12L-P[12-20/0.01]-S[6-19/0.1]-M[5,​6,​8,​10,​12]-L[2-20/1]-B[1-20/1]-C[5-20/1]
KJPGMDH12L-P[12-20/0.01]-S[6-19/0.1]-MS10-L[2-20/1]-B[1-20/1]-C[5-20/1]
KJPGMDH16-P[8-14/0.01]-S[7-13/0.1]-M[4,​5,​6,​8,​10,​12]-L[2-20/1]-B[1-20/1]-C[5-20/1]
KJPGMDH16-P[8-14/0.01]-S[7-13/0.1]-MS10-L[2-20/1]-B[1-20/1]-C[5-20/1]
KJPGMDH16L-P[16-25/0.01]-S[8-24/0.1]-M[6,​8,​10,​12]-L[2-20/1]-B[1-20/1]-C[5-20/1]
KJPGMDH16L-P[16-25/0.01]-S[8-24/0.1]-MS10-L[2-20/1]-B[1-20/1]-C[5-20/1]
KJPGMDH20-P[10-18/0.01]-S[9-17/0.1]-M[5,​6,​8,​10,​12]-L[2-20/1]-B[1-20/1]-C[5-20/1]
KJPGMDH20-P[10-18/0.01]-S[9-17/0.1]-MS10-L[2-20/1]-B[1-20/1]-C[5-20/1]
KJPGMDH20L-P[20-30/0.01]-S[10-29/0.1]-M[6,​8,​10,​12]-L[2-20/1]-B[1-20/1]-C[5-20/1]
KJPGMDH20L-P[20-30/0.01]-S[10-29/0.1]-MS10-L[2-20/1]-B[1-20/1]-C[5-20/1]
KJPGMDH25-P[15-23/0.01]-S[14-22/0.1]-M[5,​6,​8,​10,​12]-L[2-20/1]-B[1-20/1]-C[5-20/1]
KJPGMDH25-P[15-23/0.01]-S[14-22/0.1]-MS10-L[2-20/1]-B[1-20/1]-C[5-20/1]
KJPGMDS8-P[4-6/0.01]-S[3-5/0.1]-M[3,​4]-L[1-20/1]-B[1-20/1]-C[5-8/1]
KJPGMDS10-P[5-8/0.01]-S[4-7/0.1]-M[4,​5,​6]-L[1-20/1]-B[1-20/1]-C[5-18/1]
KJPGMDS12-P[5-10/0.01]-S[4-9/0.1]-M[4,​5,​6,​8]-L[1-20/1]-B[1-20/1]-C[5-20/1]
KJPGMDS16-P[8-14/0.01]-S[7-13/0.1]-M[4,​5,​6,​8,​10,​12]-L[1-20/1]-B[1-20/1]-C[5-20/1]
KJPGMDS16-P[8-14/0.01]-S[7-13/0.1]-MS10-L[1-20/1]-B[1-20/1]-C[5-20/1]
KJPGMDS20-P[10-18/0.01]-S[9-17/0.1]-M[5,​6,​8,​10,​12]-L[1-20/1]-B[1-20/1]-C[5-20/1]
KJPGMDS20-P[10-18/0.01]-S[9-17/0.1]-MS10-L[1-20/1]-B[1-20/1]-C[5-20/1]
KJPGMDS25-P[15-23/0.01]-S[14-22/0.1]-M[5,​6,​8,​10,​12]-L[1-20/1]-B[1-20/1]-C[5-20/1]
KJPGMDS25-P[15-23/0.01]-S[14-22/0.1]-MS10-L[1-20/1]-B[1-20/1]-C[5-20/1]
KJPMD8-P[4-6/0.01]-S[3-5/0.1]-M[3,​4]-L[2-20/1]-B[1-20/1]-C[5-8/1]
KJPMD10-P[5-8/0.01]-S[4-7/0.1]-M[4,​5,​6]-L[2-20/1]-B[1-20/1]-C[5-18/1]
KJPMD10L-P[10-16/0.01]-S[5-15/0.1]-M[4,​5,​6,​8,​10]-L[2-20/1]-B[1-20/1]-C[5-20/1]
KJPMD10L-P[10-16/0.01]-S[5-15/0.1]-MS10-L[2-20/1]-B[1-20/1]-C[5-20/1]
KJPMD12-P[5-10/0.01]-S[4-9/0.1]-M[4,​5,​6,​8]-L[2-20/1]-B[1-20/1]-C[5-20/1]
KJPMD12L-P[12-20/0.01]-S[6-19/0.1]-M[5,​6,​8,​10,​12]-L[2-20/1]-B[1-20/1]-C[5-20/1]
KJPMD12L-P[12-20/0.01]-S[6-19/0.1]-MS10-L[2-20/1]-B[1-20/1]-C[5-20/1]
KJPMD16-P[8-14/0.01]-S[7-13/0.1]-M[4,​5,​6,​8,​10,​12]-L[2-20/1]-B[1-20/1]-C[5-20/1]
KJPMD16-P[8-14/0.01]-S[7-13/0.1]-MS10-L[2-20/1]-B[1-20/1]-C[5-20/1]
KJPMD16L-P[16-25/0.01]-S[8-24/0.1]-M[6,​8,​10,​12]-L[2-20/1]-B[1-20/1]-C[5-20/1]
KJPMD16L-P[16-25/0.01]-S[8-24/0.1]-MS10-L[2-20/1]-B[1-20/1]-C[5-20/1]
KJPMD20-P[10-18/0.01]-S[9-17/0.1]-M[5,​6,​8,​10,​12]-L[2-20/1]-B[1-20/1]-C[5-20/1]
KJPMD20-P[10-18/0.01]-S[9-17/0.1]-MS10-L[2-20/1]-B[1-20/1]-C[5-20/1]
KJPMD20L-P[20-30/0.01]-S[10-29/0.1]-M[6,​8,​10,​12]-L[2-20/1]-B[1-20/1]-C[5-20/1]
KJPMD20L-P[20-30/0.01]-S[10-29/0.1]-MS10-L[2-20/1]-B[1-20/1]-C[5-20/1]
KJPMD25-P[15-23/0.01]-S[14-22/0.1]-M[5,​6,​8,​10,​12]-L[2-20/1]-B[1-20/1]-C[5-20/1]
KJPMD25-P[15-23/0.01]-S[14-22/0.1]-MS10-L[2-20/1]-B[1-20/1]-C[5-20/1]
Part Number
Standard Unit Price
Minimum order quantityVolume Discount
Standard
Shipping Days
?
RoHSMaterial Hardness Large Head/Small Head Insertion Part S Dimension Tolerance Outer Dia. D
(Ø) 		B
(mm) 		C
(mm) 		L
(mm) 		M MS P
(mm) 		S
(mm)

-

1 9 Days 10[Steel] EN 1.1191 Equiv.No HardenedSmall Headg681 ～ 205 ～ 82 ～ 203 ～ 4-4 ～ 63 ～ 5

-

1 9 Days 10[Steel] EN 1.1191 Equiv.No HardenedSmall Headg6101 ～ 205 ～ 182 ～ 204 ～ 6-5 ～ 84 ～ 7

-

1 9 Days 10[Steel] EN 1.1191 Equiv.No HardenedLarge Headg6101 ～ 205 ～ 202 ～ 204 ～ 10-10 ～ 165 ～ 15

-

1 9 Days 10[Steel] EN 1.1191 Equiv.No HardenedLarge Headg6101 ～ 205 ～ 202 ～ 20-1010 ～ 165 ～ 15

-

1 9 Days 10[Steel] EN 1.1191 Equiv.No HardenedSmall Headg6121 ～ 205 ～ 202 ～ 204 ～ 8-5 ～ 104 ～ 9

-

1 9 Days 10[Steel] EN 1.1191 Equiv.No HardenedLarge Headg6121 ～ 205 ～ 202 ～ 205 ～ 12-12 ～ 206 ～ 19

-

1 9 Days 10[Steel] EN 1.1191 Equiv.No HardenedLarge Headg6121 ～ 205 ～ 202 ～ 20-1012 ～ 206 ～ 19

-

1 9 Days 10[Steel] EN 1.1191 Equiv.No HardenedSmall Headg6161 ～ 205 ～ 202 ～ 204 ～ 12-8 ～ 147 ～ 13

-

1 9 Days 10[Steel] EN 1.1191 Equiv.No HardenedSmall Headg6161 ～ 205 ～ 202 ～ 20-108 ～ 147 ～ 13

-

1 9 Days 10[Steel] EN 1.1191 Equiv.No HardenedLarge Headg6161 ～ 205 ～ 202 ～ 206 ～ 12-16 ～ 258 ～ 24

-

1 9 Days 10[Steel] EN 1.1191 Equiv.No HardenedLarge Headg6161 ～ 205 ～ 202 ～ 20-1016 ～ 258 ～ 24

-

1 9 Days 10[Steel] EN 1.1191 Equiv.No HardenedSmall Headg6201 ～ 205 ～ 202 ～ 205 ～ 12-10 ～ 189 ～ 17

-

1 9 Days 10[Steel] EN 1.1191 Equiv.No HardenedSmall Headg6201 ～ 205 ～ 202 ～ 20-1010 ～ 189 ～ 17

-

1 9 Days 10[Steel] EN 1.1191 Equiv.No HardenedLarge Headg6201 ～ 205 ～ 202 ～ 206 ～ 12-20 ～ 3010 ～ 29

-

1 9 Days 10[Steel] EN 1.1191 Equiv.No HardenedLarge Headg6201 ～ 205 ～ 202 ～ 20-1020 ～ 3010 ～ 29

-

1 9 Days 10[Steel] EN 1.1191 Equiv.No HardenedSmall Headg6251 ～ 205 ～ 202 ～ 205 ～ 12-15 ～ 2314 ～ 22

-

1 9 Days 10[Steel] EN 1.1191 Equiv.No HardenedSmall Headg6251 ～ 205 ～ 202 ～ 20-1015 ～ 2314 ～ 22

-

1 9 Days 10[Steel] EN 1.1191 Equiv.45HRC ~Small Headg681 ～ 205 ～ 82 ～ 203 ～ 4-4 ～ 63 ～ 5

-

1 9 Days 10[Steel] EN 1.1191 Equiv.45HRC ~Small Headg6101 ～ 205 ～ 182 ～ 204 ～ 6-5 ～ 84 ～ 7

-

1 9 Days 10[Steel] EN 1.1191 Equiv.45HRC ~Large Headg6101 ～ 205 ～ 202 ～ 204 ～ 10-10 ～ 165 ～ 15

-

1 9 Days 10[Steel] EN 1.1191 Equiv.45HRC ~Large Headg6101 ～ 205 ～ 202 ～ 20-1010 ～ 165 ～ 15

-

1 9 Days 10[Steel] EN 1.1191 Equiv.45HRC ~Small Headg6121 ～ 205 ～ 202 ～ 204 ～ 8-5 ～ 104 ～ 9

-

1 9 Days 10[Steel] EN 1.1191 Equiv.45HRC ~Large Headg6121 ～ 205 ～ 202 ～ 205 ～ 12-12 ～ 206 ～ 19

-

1 9 Days 10[Steel] EN 1.1191 Equiv.45HRC ~Large Headg6121 ～ 205 ～ 202 ～ 20-1012 ～ 206 ～ 19

-

1 9 Days 10[Steel] EN 1.1191 Equiv.45HRC ~Small Headg6161 ～ 205 ～ 202 ～ 204 ～ 12-8 ～ 147 ～ 13

-

1 9 Days 10[Steel] EN 1.1191 Equiv.45HRC ~Small Headg6161 ～ 205 ～ 202 ～ 20-108 ～ 147 ～ 13

-

1 9 Days 10[Steel] EN 1.1191 Equiv.45HRC ~Large Headg6161 ～ 205 ～ 202 ～ 206 ～ 12-16 ～ 258 ～ 24

-

1 9 Days 10[Steel] EN 1.1191 Equiv.45HRC ~Large Headg6161 ～ 205 ～ 202 ～ 20-1016 ～ 258 ～ 24

-

1 9 Days 10[Steel] EN 1.1191 Equiv.45HRC ~Small Headg6201 ～ 205 ～ 202 ～ 205 ～ 12-10 ～ 189 ～ 17

-

1 9 Days 10[Steel] EN 1.1191 Equiv.45HRC ~Small Headg6201 ～ 205 ～ 202 ～ 20-1010 ～ 189 ～ 17

-

1 9 Days 10[Steel] EN 1.1191 Equiv.45HRC ~Large Headg6201 ～ 205 ～ 202 ～ 206 ～ 12-20 ～ 3010 ～ 29

-

1 9 Days 10[Steel] EN 1.1191 Equiv.45HRC ~Large Headg6201 ～ 205 ～ 202 ～ 20-1020 ～ 3010 ～ 29

-

1 9 Days 10[Steel] EN 1.1191 Equiv.45HRC ~Small Headg6251 ～ 205 ～ 202 ～ 205 ～ 12-15 ～ 2314 ～ 22

-

1 9 Days 10[Steel] EN 1.1191 Equiv.45HRC ~Small Headg6251 ～ 205 ～ 202 ～ 20-1015 ～ 2314 ～ 22

-

1 9 Days 10[Stainless Steel] EN 1.4301 Equiv.No HardenedSmall Headg681 ～ 205 ～ 81 ～ 203 ～ 4-4 ～ 63 ～ 5

-

1 9 Days 10[Stainless Steel] EN 1.4301 Equiv.No HardenedSmall Headg6101 ～ 205 ～ 181 ～ 204 ～ 6-5 ～ 84 ～ 7

-

1 9 Days 10[Stainless Steel] EN 1.4301 Equiv.No HardenedSmall Headg6121 ～ 205 ～ 201 ～ 204 ～ 8-5 ～ 104 ～ 9

-

1 9 Days 10[Stainless Steel] EN 1.4301 Equiv.No HardenedSmall Headg6161 ～ 205 ～ 201 ～ 204 ～ 12-8 ～ 147 ～ 13

-

1 9 Days 10[Stainless Steel] EN 1.4301 Equiv.No HardenedSmall Headg6161 ～ 205 ～ 201 ～ 20-108 ～ 147 ～ 13

-

1 9 Days 10[Stainless Steel] EN 1.4301 Equiv.No HardenedSmall Headg6201 ～ 205 ～ 201 ～ 205 ～ 12-10 ～ 189 ～ 17

-

1 9 Days 10[Stainless Steel] EN 1.4301 Equiv.No HardenedSmall Headg6201 ～ 205 ～ 201 ～ 20-1010 ～ 189 ～ 17

-

1 9 Days 10[Stainless Steel] EN 1.4301 Equiv.No HardenedSmall Headg6251 ～ 205 ～ 201 ～ 205 ～ 12-15 ～ 2314 ～ 22

-

1 9 Days 10[Stainless Steel] EN 1.4301 Equiv.No HardenedSmall Headg6251 ～ 205 ～ 201 ～ 20-1015 ～ 2314 ～ 22

-

1 9 Days 10[Steel] EN 1.1191 Equiv.No HardenedSmall Head0/-0.0281 ～ 205 ～ 82 ～ 203 ～ 4-4 ～ 63 ～ 5

-

1 9 Days 10[Steel] EN 1.1191 Equiv.No HardenedSmall Head0/-0.02101 ～ 205 ～ 182 ～ 204 ～ 6-5 ～ 84 ～ 7

-

1 9 Days 10[Steel] EN 1.1191 Equiv.No HardenedLarge Head0/-0.02101 ～ 205 ～ 202 ～ 204 ～ 10-10 ～ 165 ～ 15

-

1 9 Days 10[Steel] EN 1.1191 Equiv.No HardenedLarge Head0/-0.02101 ～ 205 ～ 202 ～ 20-1010 ～ 165 ～ 15

-

1 9 Days 10[Steel] EN 1.1191 Equiv.No HardenedSmall Head0/-0.02121 ～ 205 ～ 202 ～ 204 ～ 8-5 ～ 104 ～ 9

-

1 9 Days 10[Steel] EN 1.1191 Equiv.No HardenedLarge Head0/-0.02121 ～ 205 ～ 202 ～ 205 ～ 12-12 ～ 206 ～ 19

-

1 9 Days 10[Steel] EN 1.1191 Equiv.No HardenedLarge Head0/-0.02121 ～ 205 ～ 202 ～ 20-1012 ～ 206 ～ 19

-

1 9 Days 10[Steel] EN 1.1191 Equiv.No HardenedSmall Head0/-0.02161 ～ 205 ～ 202 ～ 204 ～ 12-8 ～ 147 ～ 13

-

1 9 Days 10[Steel] EN 1.1191 Equiv.No HardenedSmall Head0/-0.02161 ～ 205 ～ 202 ～ 20-108 ～ 147 ～ 13

-

1 9 Days 10[Steel] EN 1.1191 Equiv.No HardenedLarge Head0/-0.02161 ～ 205 ～ 202 ～ 206 ～ 12-16 ～ 258 ～ 24

-

1 9 Days 10[Steel] EN 1.1191 Equiv.No HardenedLarge Head0/-0.02161 ～ 205 ～ 202 ～ 20-1016 ～ 258 ～ 24

-

1 9 Days 10[Steel] EN 1.1191 Equiv.No HardenedSmall Head0/-0.02201 ～ 205 ～ 202 ～ 205 ～ 12-10 ～ 189 ～ 17

-

1 9 Days 10[Steel] EN 1.1191 Equiv.No HardenedSmall Head0/-0.02201 ～ 205 ～ 202 ～ 20-1010 ～ 189 ～ 17

-

1 9 Days 10[Steel] EN 1.1191 Equiv.No HardenedLarge Head0/-0.02201 ～ 205 ～ 202 ～ 206 ～ 12-20 ～ 3010 ～ 29

-

1 9 Days 10[Steel] EN 1.1191 Equiv.No HardenedLarge Head0/-0.02201 ～ 205 ～ 202 ～ 20-1020 ～ 3010 ～ 29

-

1 9 Days 10[Steel] EN 1.1191 Equiv.No HardenedSmall Head0/-0.02251 ～ 205 ～ 202 ～ 205 ～ 12-15 ～ 2314 ～ 22

-

1 9 Days 10[Steel] EN 1.1191 Equiv.No HardenedSmall Head0/-0.02251 ～ 205 ～ 202 ～ 20-1015 ～ 2314 ～ 22

Loading...

  1. 1
  2. 2
  3. Next >>

App. Example

For 2-Step Large Head type, first row can be used as a shoulder.

Slot Pins for Inspection Components - Straight Threaded With Step, 2-Step Type: Related Image
 

Basic information

Type Slot Pin Shape Stepped Tip Shape Circular Shape
Tip Type Threads Shape of Stepped Section Circular Shape Stepped Double-Row Type

Configure

Clear all

86Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.
The part number is completed.

Basic Attributes

  • Material

    • Steel
      • EN 1.1191 Equiv.
    • Stainless Steel
      • EN 1.4301 Equiv.

    Clear

  • Hardness

    • 45HRC ~
    • No Hardened

    Clear

  • Large Head/Small Head

    • Large Head
    • Small Head

    Clear

  • Insertion Part S Dimension Tolerance

    • 0/-0.02
    • g6

    Clear

  • Outer Dia. D(Ø)

    • 8
    • 10
    • 12
    • 16
    • 20
    • 25

    Clear

  • B(mm)

     [1-20/1mm Unit(s)]

    Clear

  • C(mm)

     [5-20/1mm Unit(s)]

    Clear

  • L(mm)

     [1-20/1mm Unit(s)]

    Clear

  • M

    • 3
    • 4
    • 5
    • 6
    • 8
    • 10
    • 12

    Clear

  • MS

    • 10

    Clear

  • P(mm)

     [4-30/0.01mm Unit(s)]

    Clear

  • S(mm)

     [3-29/0.1mm Unit(s)]

    Clear

  • Type

    • KJPGMD
    • KJPGMDH
    • KJPGMDS
    • KJPMD
    • KJPMDH
    • KJPMDS

    Clear

  • Filter by CAD data type

    • 2D
    • 3D

    Clear

Filter by standard shipping days

    • All
    • 9 Days or Less

    Reset

Optional Attributes

Tech Support

Technical Support
Tel：+49 69 668173-0 / FAX：+49 69 668173-360
Technical Inquiry

Payment Method

  • Payment on account
  • Pre Payment
  • PayPal

On-Demand Manufacturing

Change View

Certificates

  • ISO-9001
  • ISO-14001
  • AEO Certification
  • RoHS
  • REACH

MISUMI worldwide

Social Media

Legal notice

Copyright © MISUMI Corporation All Rights Reserved.