• Brands
  • Company
  • Contact
EN / UK
Type Code Seach | *NOT READY*
#CODE
Keyword suggestions
Part number suggestions
Discontinued Products

Marking Pins / Straight / Stepped / Hollow Edged

Marking Pins / Straight / Stepped / Hollow Edged

MISUMI

MISUMI

Pin that can be used when you want to score a product to check its dimensions.

Data sheet

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Dimensional Drawing

(1) Straight (Standard)
 Small Head: D = 12 to 30


Large Head: D = 12 L to 20 L" ! "3

(1) Straight (Sharp Pointed Tip)
 Small Head: D = 12 to 30


Large Head: D = 12 L to 20 L" ! "3

(2) Stepped (Standard)
 Small Head: D = 12 to 30


Large Head: D = 12 L to 20 L" ! "3

* When S = 2, C is 0.5.

(2) Stepped (Sharp Pointed Tip)
 Small Head: D = 12 to 30


Large Head: D = 12 L to 20 L" ! "3

* When S = 2, C is 0.5.

(3) Hollow Tip

[ ! ]2

[ ! ]2

[ ! ]2

[ ! ]2

[ ! ]2

[ ! ]2

[ ! ]2

[ ! ]2

[ ! ]2

Dimensional Drawing: Related Image
[!] Unless otherwise specified, the dimension tolerance conforms to JIS B 0405 Class m. However, chamfer tolerances, tapped depth, and angular dimension tolerances are excluded.
[ ! ] 2. To shorten the handle, specify alteration ZC shown below.
[ ! ] 3. Dimensions not specified are the same as those of Small Head Type.
[!] Handles and pins may be joined with an adhesive. Heat or strong force may cause separation.
[ ! ] For this product, when 50 < L, the handle is not hardened.
 
Config.[M] Material[!]1[H] Hardness(1) Straight(2) Stepped(3) Hollow tip
TYPE, ToleranceTYPE, ToleranceTYPE, Tolerance
P   0
－0.02		Pg6S   0
－0.02		Sg6Pg6
StandardEN 1.2510 Equiv.58HRC or moreKJPKHKJPGKHKJPKSKJPGKS—
Sharp Pointed TipEN 1.2510 Equiv.58HRC or moreKJPKHEKJPGKHEKJPKSEKJPGKSEKJPGKSC
[ ! ] 1. When L dimension is 51 or more, the material for the handle part is EN 1.1191 Equiv.
Dimensional tolerance of shafts used in fits
Dimension Range
(mm)		Shaft
Tolerances
Overor Lessg6
—3－2
－8
36－4
－12
610－5
－14
1014－6
－17
1418
1824－7
－20
2430

Specification Table

 Part Number (TYPE·D)—P—S—L—B
              
(1) Straight Standard
(1) Straight, Sharp Pointed Tip
(2) Stepped Standard, Large Head
(3) Hollow Tip, Sharp Pointed Tip		KJPKH20
KJPKHE16
KJPKS16L
KJPGKSC16		—
—
—		P16.00
P10.10
P20.20

—
—

S6.8
S6.0		—
—
—
—		L100
L12
L10
L10

—
—

B10
B10
■ (1) Straight
Part NumberP
0.01 mm Increments		L
1 mm Increments
TYPED
P     0
  －0.02		Pg6
(Standard)
KJPKH

(Sharp Pointed Tip)
KJPKHE		(Standard)
KJPGKH

(Sharp Pointed Tip)
KJPGKHE		126.00 to 10.0010 to 100
1610.01 to 14.00
2014.01 to 18.00
2518.01 to 20.00
3020.01 to 25.0010 to 50
12 L12.00 to 20.00
16 L16.00 to 25.00
20 L20.00 to 30.00
■ (2) Stepped
Part NumberP
0.01 mm Increments		S (P−4 ≥ S)
0.1 mm Increments		L
1 mm Increments		B
1 mm Increments
TYPED
S     0
  －0.02		Sg6
(Standard)
KJPKS

(Sharp Pointed Tip)
KJPKSE		(Standard)
KJPGKS

(Sharp Pointed Tip)
KJPGKSE		126.00 to 10.002.0 to 6.05 to 2010 to 20
168.00 to 14.003.0 to 10.010 to 40
2010.00 to 18.003.0 to 14.0
2515.00 to 23.006.0 to 19.0
3020.00 to 28.0010.0 to 24.0
12 L12.00 to 20.003.0 to 16.0
16 L16.00 to 25.006.0 to 21.0
20 L20.00 to 30.0010.0 to 26.0
■ (3) Hollow Tip
Part NumberS
0.1 mm Increments		L* 1
1 mm Increments		B
1 mm Increments		P* 2
TypeD
KJPGKSC122.0 to 4.05 to 403 to 1510
163.0 to 6.03 to 3012
206.0 to 10.05 to 3016
258.0 to 14.05 to 3520
3012.0 to 19.05 to 3525
* 1. When L dimension of Hollow Tip Type is short,
it may interfere with M5 screw pilot hole.
* 2. When P dimension needs to be configured for Hollow Tip Type,
specify alteration PC.

Alterations

Part Number—P—S—L—B—(CH·KH·PKC ... etc.)
KJPKH16
KJPGKSC20
KJPKHE12
KJPKSE16L		—

—
—		P10.1

P7.02
P20.00
—

—
S8.0

S12.1		—
—
—
—		L12
L25
L80
L15
—

—
B20

B20		—
—
—
—		CH
PC14
ZC30
PKC
AlterationsCodeSpec.
Additional Surface Treatment
(Black Oxide)		STCAdds black oxide surface treatment.
P Dimension
Alterations: Related Image		PCChanges the P dimension.
[ ! ] Applicable to Hollow Tip Type only

[ ! ] Specify the tap size so that 3 mm or more wall thickness remains.
(PC ≥ S+ 6)

Ordering Code PC13
DPC
1 mm Increments
128·9
1610·11
2012 to 15
2516 to 19
3020 to 24
Engraving of the Specified Characters
Alterations: Related Image		KFEngraves alphabet or number.
Ordering Code KF-MISUMI0034
Printable Character: Alphabet
·Number, . (period)

[ ! ]No symbols, such as a hyphen (-), other than those mentioned above may be used for engraving.

[ ! ] The pin's orientation toward the engraved characters is arbitrary.

[ ! ] Engraved on the reverse side when combined with KH.
Z (Handle)Max. Characters
Small HeadLarge Head
30105
401210
50
[ ! ] Up to 8 digits max.

[ ! ] When combining with other options, enter this last.

Engraving of P Dimension
Alterations: Related Image		KHMachines flats on knurled head and engraves P dimension.
(With the character orientation arbitrary).
[ ! ] Engraved on the reverse side when combined with KF
AlterationsCodeSpec.
P Dimension Tolerance
Alterations: Related Image		PKCChanges P dimension tolerance to g6.
[ ! ] Applicable to Stepped Type only
Tip
Alterations: Related Image		SSTSharpens the tip of Acute-angled Type to the triangle shape.
[ ! ] Applicable to Acute-angled Type only.
Chain
Alterations: Related Image		CHLoss-proof chain (length 600 mm) is attached to gauge body.
Handle Length
Alterations: Related Image		ZCChanges handle length 50 to 30 or 40.
Caution when making alterations to engraving (KF, KH)
Alterations: Related Image

[ ! ]If the pin and the knurled part are joined with an adhesive,
10 mm of the tip is not machined flat because the tip is thin.

KF Alteration (Engraving of Specified Characters) Precautions

(1) Please enter the characters you want after "KF-".
(2) Printable characters are alphabets, numbers, and periods (.).
(3) Numbers can be up to 8 characters.
(4) When combining with other alterations, enter KF last.
(5) You cannot use more than 1 period (.).
[Example]
　OK: KJPGSH16-P9.34-L30-STT-KH-KF-246625.5020
　NG: KJPGSH16-P9.34-L30-STT-KH-KF-246625..5020
　NG: KJPGSH16-P9.34-L30-STT-KH-KF-246.625.5020

Part Number:  

    3D preview is not available, because the part number has not yet been determined.

  • In order to open the 3D preview, the part number must be fixed.
Loading...

Plug-in is required for 3D Preview

CAD Download

Data to be displayed
30
45
60
  1. 1
  2. 2
  3. Next >>
Part Number
KJPGKH12-P[6-10/0.01]-L[10-100/1]
KJPGKH12L-P[12-20/0.01]-L[10-50/1]
KJPGKH16-P[10-14/0.01]-L[10-100/1]
KJPGKH16L-P[16-25/0.01]-L[10-50/1]
KJPGKH20-P[14-18/0.01]-L[10-100/1]
KJPGKH20L-P[20-30/0.01]-L[10-50/1]
KJPGKH25-P[18-20/0.01]-L[10-100/1]
KJPGKH30-P20-L[10-50/1]
KJPGKH30-P[20.01-25/0.01]-L[10-50/1]
KJPGKHE12-P[6-10/0.01]-L[10-100/1]
KJPGKHE12L-P[12-20/0.01]-L[10-50/1]
KJPGKHE16-P[10-14/0.01]-L[10-100/1]
KJPGKHE16L-P[16-25/0.01]-L[10-50/1]
KJPGKHE20-P[14-18/0.01]-L[10-100/1]
KJPGKHE20L-P[20-30/0.01]-L[10-50/1]
KJPGKHE25-P[18-20/0.01]-L[10-100/1]
KJPGKHE30-P20-L[10-50/1]
KJPGKHE30-P[20.01-25/0.01]-L[10-50/1]
KJPGKS12-P[6-10/0.01]-S[2-6/0.1]-L[5-20/1]-B[10-20/1]
KJPGKS12L-P[12-20/0.01]-S[3-16/0.1]-L[5-20/1]-B[10-40/1]
KJPGKS16-P[8-14/0.01]-S[3-10/0.1]-L[5-20/1]-B[10-40/1]
KJPGKS16L-P[16-25/0.01]-S[6-21/0.1]-L[5-20/1]-B[10-40/1]
KJPGKS20-P[10-18/0.01]-S[3-14/0.1]-L[5-20/1]-B[10-40/1]
KJPGKS20L-P[20-30/0.01]-S[10-26/0.1]-L[5-20/1]-B[10-40/1]
KJPGKS25-P[15-23/0.01]-S[6-19/0.1]-L[5-20/1]-B[10-40/1]
KJPGKS30-P[20-28/0.01]-S[10-24/0.1]-L[5-20/1]-B[10-40/1]
KJPGKSC12-S[2-4/0.1]-L[5-40/1]-B[3-15/1]
KJPGKSC16-S[3-6/0.1]-L[5-40/1]-B[3-30/1]
KJPGKSC20-S[6-10/0.1]-L[5-40/1]-B[5-30/1]
KJPGKSC25-S[8-14/0.1]-L[5-40/1]-B[5-35/1]
KJPGKSC30-S[12-19/0.1]-L[5-40/1]-B[5-35/1]
KJPGKSE12-P[6-10/0.01]-S[2-6/0.1]-L[5-20/1]-B[10-20/1]
KJPGKSE12L-P[12-20/0.01]-S[3-16/0.1]-L[5-20/1]-B[10-40/1]
KJPGKSE16-P[8-14/0.01]-S[3-10/0.1]-L[5-20/1]-B[10-40/1]
KJPGKSE16L-P[16-25/0.01]-S[6-21/0.1]-L[5-20/1]-B[10-40/1]
KJPGKSE20-P[10-18/0.01]-S[3-14/0.1]-L[5-20/1]-B[10-40/1]
KJPGKSE20L-P[20-30/0.01]-S[10-26/0.1]-L[5-20/1]-B[10-40/1]
KJPGKSE25-P[15-23/0.01]-S[6-19/0.1]-L[5-20/1]-B[10-40/1]
KJPGKSE30-P[20-28/0.01]-S[10-24/0.1]-L[5-20/1]-B[10-40/1]
KJPKH12-P[6-10/0.01]-L[10-100/1]
KJPKH12L-P[12-20/0.01]-L[10-50/1]
KJPKH16-P[10-14/0.01]-L[10-100/1]
KJPKH16L-P[16-25/0.01]-L[10-50/1]
KJPKH20-P[14-18/0.01]-L[10-100/1]
KJPKH20L-P[20-30/0.01]-L[10-50/1]
KJPKH25-P[18-20/0.01]-L[10-100/1]
KJPKH30-P20-L[10-50/1]
KJPKH30-P[20.01-25/0.01]-L[10-50/1]
KJPKHE12-P[6-10/0.01]-L[10-100/1]
KJPKHE12L-P[12-20/0.01]-L[10-50/1]
KJPKHE16-P[10.01-14/0.01]-L[10-100/1]
KJPKHE16L-P[16-25/0.01]-L[10-50/1]
KJPKHE20-P[14-18/0.01]-L[10-100/1]
KJPKHE20L-P[20-30/0.01]-L[10-50/1]
KJPKHE25-P[18-20/0.01]-L[10-100/1]
KJPKHE30-P20-L[10-50/1]
KJPKHE30-P[20.01-25/0.01]-L[10-50/1]
KJPKS12-P[6-10/0.01]-S[2-6/0.1]-L[5-20/1]-B[10-20/1]
KJPKS12L-P[12-20/0.01]-S[3-16/0.1]-L[5-20/1]-B[10-40/1]
KJPKS16-P[8-14/0.01]-S[3-10/0.1]-L[5-20/1]-B[10-40/1]
Part Number
Standard Unit Price
Minimum order quantityVolume Discount
Standard
Shipping Days
?
RoHSShape Large Head/Small Head Insertion Part S Dimension Tolerance Insertion Part P Dimension Tolerance Scribing Pin Tip Shape Scribing Pin Shape Outer Dia. D
(Ø) 		B
(mm) 		L
(mm) 		P
(mm) 		S
(mm)

-

1 9 Days 10StraightSmall Head-g6StandardStraight12-10 ～ 1006 ～ 10-

-

1 9 Days 10StraightLarge Head-g6StandardStraight12-10 ～ 5012 ～ 20-

-

1 9 Days 10StraightSmall Head-g6StandardStraight16-10 ～ 10010 ～ 14-

-

1 9 Days 10StraightLarge Head-g6StandardStraight16-10 ～ 5016 ～ 25-

-

1 9 Days 10StraightSmall Head-g6StandardStraight20-10 ～ 10014 ～ 18-

-

1 9 Days 10StraightLarge Head-g6StandardStraight20-10 ～ 5020 ～ 30-

-

1 9 Days 10StraightSmall Head-g6StandardStraight25-10 ～ 10018 ～ 20-

-

1 9 Days 10StraightSmall Head-g6StandardStraight30-10 ～ 50--

-

1 9 Days 10StraightSmall Head-g6StandardStraight30-10 ～ 5020.01 ～ 25-

-

1 9 Days 10StraightSmall Head-g6Sharp Pointed TipStraight12-10 ～ 1006 ～ 10-

-

1 9 Days 10StraightLarge Head-g6Sharp Pointed TipStraight12-10 ～ 5012 ～ 20-

-

1 9 Days 10StraightSmall Head-g6Sharp Pointed TipStraight16-10 ～ 10010 ～ 14-

-

1 9 Days 10StraightLarge Head-g6Sharp Pointed TipStraight16-10 ～ 5016 ～ 25-

-

1 9 Days 10StraightSmall Head-g6Sharp Pointed TipStraight20-10 ～ 10014 ～ 18-

-

1 9 Days 10StraightLarge Head-g6Sharp Pointed TipStraight20-10 ～ 5020 ～ 30-

-

1 9 Days 10StraightSmall Head-g6Sharp Pointed TipStraight25-10 ～ 10018 ～ 20-

-

1 9 Days 10StraightSmall Head-g6Sharp Pointed TipStraight30-10 ～ 50--

-

1 9 Days 10StraightSmall Head-g6Sharp Pointed TipStraight30-10 ～ 5020.01 ～ 25-

-

1 9 Days 10SteppedSmall Headg6-StandardStepped1210 ～ 205 ～ 206 ～ 102 ～ 6

-

1 9 Days 10SteppedLarge Headg6-StandardStepped1210 ～ 405 ～ 2012 ～ 203 ～ 16

-

1 9 Days 10SteppedSmall Headg6-StandardStepped1610 ～ 405 ～ 208 ～ 143 ～ 10

-

1 9 Days 10SteppedLarge Headg6-StandardStepped1610 ～ 405 ～ 2016 ～ 256 ～ 21

-

1 9 Days 10SteppedSmall Headg6-StandardStepped2010 ～ 405 ～ 2010 ～ 183 ～ 14

-

1 9 Days 10SteppedLarge Headg6-StandardStepped2010 ～ 405 ～ 2020 ～ 3010 ～ 26

-

1 9 Days 10SteppedSmall Headg6-StandardStepped2510 ～ 405 ～ 2015 ～ 236 ～ 19

-

1 9 Days 10SteppedSmall Headg6-StandardStepped3010 ～ 405 ～ 2020 ～ 2810 ～ 24

-

1 9 Days 10StraightSmall Head-g6Sharp Pointed TipHollow Tip123 ～ 155 ～ 40-2 ～ 4

-

1 9 Days 10StraightSmall Head-g6Sharp Pointed TipHollow Tip163 ～ 305 ～ 40-3 ～ 6

-

1 9 Days 10StraightSmall Head-g6Sharp Pointed TipHollow Tip205 ～ 305 ～ 40-6 ～ 10

-

1 9 Days 10StraightSmall Head-g6Sharp Pointed TipHollow Tip255 ～ 355 ～ 40-8 ～ 14

-

1 9 Days 10StraightSmall Head-g6Sharp Pointed TipHollow Tip305 ～ 355 ～ 40-12 ～ 19

-

1 9 Days 10SteppedSmall Headg6-Sharp Pointed TipStepped1210 ～ 205 ～ 206 ～ 102 ～ 6

-

1 9 Days 10SteppedLarge Headg6-Sharp Pointed TipStepped1210 ～ 405 ～ 2012 ～ 203 ～ 16

-

1 9 Days 10SteppedSmall Headg6-Sharp Pointed TipStepped1610 ～ 405 ～ 208 ～ 143 ～ 10

-

1 9 Days 10SteppedLarge Headg6-Sharp Pointed TipStepped1610 ～ 405 ～ 2016 ～ 256 ～ 21

-

1 9 Days 10SteppedSmall Headg6-Sharp Pointed TipStepped2010 ～ 405 ～ 2010 ～ 183 ～ 14

-

1 9 Days 10SteppedLarge Headg6-Sharp Pointed TipStepped2010 ～ 405 ～ 2020 ～ 3010 ～ 26

-

1 9 Days 10SteppedSmall Headg6-Sharp Pointed TipStepped2510 ～ 405 ～ 2015 ～ 236 ～ 19

-

1 9 Days 10SteppedSmall Headg6-Sharp Pointed TipStepped3010 ～ 405 ～ 2020 ～ 2810 ～ 24

-

1 9 Days 10StraightSmall Head-0/-0.02StandardStraight12-10 ～ 1006 ～ 10-

-

1 9 Days 10StraightLarge Head-0/-0.02StandardStraight12-10 ～ 5012 ～ 20-

-

1 9 Days 10StraightSmall Head-0/-0.02StandardStraight16-10 ～ 10010 ～ 14-

-

1 9 Days 10StraightLarge Head-0/-0.02StandardStraight16-10 ～ 5016 ～ 25-

-

1 9 Days 10StraightSmall Head-0/-0.02StandardStraight20-10 ～ 10014 ～ 18-

-

1 9 Days 10StraightLarge Head-0/-0.02StandardStraight20-10 ～ 5020 ～ 30-

-

1 9 Days 10StraightSmall Head-0/-0.02StandardStraight25-10 ～ 10018 ～ 20-

-

1 9 Days 10StraightSmall Head-0/-0.02StandardStraight30-10 ～ 50--

-

1 9 Days 10StraightSmall Head-0/-0.02StandardStraight30-10 ～ 5020.01 ～ 25-

-

1 9 Days 10StraightSmall Head-0/-0.02Sharp Pointed TipStraight12-10 ～ 1006 ～ 10-

-

1 9 Days 10StraightLarge Head-0/-0.02Sharp Pointed TipStraight12-10 ～ 5012 ～ 20-

-

1 9 Days 10StraightSmall Head-0/-0.02Sharp Pointed TipStraight16-10 ～ 10010.01 ～ 14-

-

1 9 Days 10StraightLarge Head-0/-0.02Sharp Pointed TipStraight16-10 ～ 5016 ～ 25-

-

1 9 Days 10StraightSmall Head-0/-0.02Sharp Pointed TipStraight20-10 ～ 10014 ～ 18-

-

1 9 Days 10StraightLarge Head-0/-0.02Sharp Pointed TipStraight20-10 ～ 5020 ～ 30-

-

1 9 Days 10StraightSmall Head-0/-0.02Sharp Pointed TipStraight25-10 ～ 10018 ～ 20-

-

1 9 Days 10StraightSmall Head-0/-0.02Sharp Pointed TipStraight30-10 ～ 50--

-

1 9 Days 10StraightSmall Head-0/-0.02Sharp Pointed TipStraight30-10 ～ 5020.01 ～ 25-

-

1 9 Days 10SteppedSmall Head0/-0.02-StandardStepped1210 ～ 205 ～ 206 ～ 102 ～ 6

-

1 9 Days 10SteppedLarge Head0/-0.02-StandardStepped1210 ～ 405 ～ 2012 ～ 203 ～ 16

-

1 9 Days 10SteppedSmall Head0/-0.02-StandardStepped1610 ～ 405 ～ 208 ～ 143 ～ 10

Loading...

  1. 1
  2. 2
  3. Next >>

App. Example

Straight

Stepped

Hollow Tip

App. Example: Related Image
 

Basic information

Type Marking Pins Material EN 1.2510 Equiv. Hardness No Hardened

Configure

Clear all

73Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.
The part number is completed.

Basic Attributes

  • Shape

    • Straight
    • Stepped

    Clear

  • Large Head/Small Head

    • Large Head
    • Small Head

    Clear

  • Insertion Part S Dimension Tolerance

    • 0/-0.02
    • g6

    Clear

  • Insertion Part P Dimension Tolerance

    • 0/-0.02
    • g6

    Clear

  • Scribing Pin Tip Shape

    • Sharp Pointed Tip
    • Standard

    Clear

  • Scribing Pin Shape

    • Hollow Tip
    • Stepped
    • Straight

    Clear

  • Outer Dia. D(Ø)

    • 12
    • 16
    • 20
    • 25
    • 30

    Clear

  • B(mm)

     [3-40/1mm Unit(s)]

    Clear

  • L(mm)

     [5-100/1mm Unit(s)]

    Clear

  • P(mm)

     [6-30/0.01mm Unit(s)]

    Clear

  • S(mm)

     [2-26/0.1mm Unit(s)]

    Clear

  • Type

    • KJPGKH
    • KJPGKHE
    • KJPGKS
    • KJPGKSC
    • KJPGKSE
    • KJPKH
    • KJPKHE
    • KJPKS
    • KJPKSE

    Clear

  • Filter by CAD data type

    • 2D
    • 3D

    Clear

Filter by standard shipping days

    • All
    • 9 Days or Less

    Reset

Optional Attributes

Complementary Products

Tech Support

Technical Support
Tel：+49 69 668173-0 / FAX：+49 69 668173-360
Technical Inquiry

Payment Method

  • Payment on account
  • Pre Payment
  • PayPal

On-Demand Manufacturing

Change View

Certificates

  • ISO-9001
  • ISO-14001
  • AEO Certification
  • RoHS
  • REACH

MISUMI worldwide

Social Media

Legal notice

Copyright © MISUMI Corporation All Rights Reserved.